Template-blocking PCR: An advanced PCR technique for genome walking

This article describes the development of an improved method for the isolation of genomic fragments adjacent to a known DNA sequence based on a cassette ligation-mediated polymerase chain reaction (PCR) technique. To reduce the nonspecific amplification of PCR-based genome walking, the 3′ ends of the restriction enzyme-digested genomic DNA fragments were blocked with dideoxynucleoside triphosphate (ddNTP) and ligated with properly designed cassettes. The modified genomic DNA fragments flanked with cassettes were used as a template for the amplification of a target gene with a gene-specific primer (GSP) and a cassette primer (CP). The ddNTP blocking of the genomic DNA ends significantly reduced the nonspecific amplification and resulted in a simple and rapid walking along the genome. The efficiency of the template-blocking PCR method was confirmed by a carefully designed control experiment. The method was successfully applied for the cloning of the PGK1 promoter from Pichia ciferrii and two novel cellulase genes from Penicillium sp.     

Strand specific PCR amplification of low copy number DNA.

A method for the amplification of a single DNA strand at low copy number is described. It is a wholly PCR based approach which involves an initial linear amplification of the target using a tagged strand specific primer. This is followed by classical PCR amplification of the progeny using a pair of primers, one specific for the sequence tagged onto the 5' end of the first round primer, the second specific for the target sequence. Given the protocol used the ratio of the two strands in the final amplification product was 50:1.     

T-linker-specific ligation PCR (T-linker PCR): an advanced PCR technique for chromosome walking or for isolation of tagged DNA ends

Dozens of PCR-based methods are available for chromosome walking from a known sequence to an unknown region. These methods are of three types: inverse PCR, ligation-mediated PCR and randomly primed PCR. However, none of them has been generally applied for this purpose, because they are either difficult or inefficient. Here we describe a simple and efficient PCR strategy—T-linker-specific ligation PCR (T-linker PCR) for gene or chromosome walking. The strategy amplifies the template molecules in three steps. First, genomic DNA is digested with 3′ overhang enzymes. Secondly, primed by a specific primer, a strand of the target molecule is replicated by Taq DNA polymerase and a single A tail is generated on the 3′ unknown end of the target molecule, and then a 3′ overhang-T linker (named T-linker) is specifically ligated onto the target. Thirdly, the target is amplified by two rounds of nested PCR with specific primers and T-linker primers. T-linker PCR significantly improves the existing PCR methods for walking because it uses specific T/A ligation instead of arbitrary ligation or random annealing. To show the feasibility and efficiency of T-linker PCR, we have exploited this method to identify vector DNA or T-DNA insertions in transgenic plants.     

Directional genome walking using PCR

We describe here a PCR-based "directional genome walking" protocol. The basic procedure for the amplification consists of two rounds of PCR. A primary PCR was performed, on the genomic DNA using a biotinylated primer specific to a known sequence in the genome along with four universal walker primers that were designed with partial degeneracy. The biotinylated primary PCR products were immobilized on streptavidin-linked paramagnetic beads. This step removed all nonspecific amplification products, and the purified template was used for the second PCR using a nested primer and the walker primer-2 to increase specificity. This technique is potentially useful for cloning promoter regions and has been successfully used to isolate 5'-flanking genomic regions of many cDNA clones previously isolated by us.     

Rapid amplification of genomic ends (RAGE) as a simple method to clone flanking genomic DNA

This report describes the amplification of upstream genomic sequences using the polymerase chain reaction (PCR) based solely on downstream DNA information from a cDNA clone. In this novel and rapid technique, genomic DNA (gDNA) is first incubated with a restriction enzyme that recognizes a site within the 5′ end of a gene, followed by denaturation and polyadenylation of its free 3′ ends with terminal transferase. The modified gDNA is then used as template for PCR using a gene-specific primer complementary to a sequence in the 3′ end of its cDNA and an anchored deoxyoligothymidine primer. A second round of PCR is then performed with a second, nested gene-specific primer and the anchor sequence primer. The resulting PCR product is cloned and its sequence determined. Three independent plant genomic clones were isolated using this method that exhibited complete sequence identity to their cDNAs and to the primers used in the amplification.     

Rapid amplification of genomic DNA ends bynla III partial digestion and polynucleotide tailing

We report a simple and efficient method, which combines restriction endonuclease digestion and deoxynucleotide tailing, for cloning unknown genomic sequences adjacent to a known sequence. Total genomic DNA is partially digested with the frequent-cutting restriction enzymeNla III. A homo-oligomeric cytosine tail is added by terminal transferase. The tailed DNA fragments are used as the template for cloning flanking regions from all sequences of interest. A first round PCR amplification is performed with a gene-specific primer and the selective (modified polyguanine) anchor primer complementary to the cytosine tail and theNla III recognition site, with a universal amplification primer sequence at its 5′ end. This is followed by another PCR amplification with a nested gene-specific primer and the universal amplification primer. Finally, the amplified products are fractionated, cloned, and sequenced. Using this method, we cloned the upstream region of a salt-induced gene based upon a partial cDNA clone (RSC5-U) obtained from sunflower (Helianthus annuus L.).     

Rapid isolation of flanking genomic DNA using biotin-RAGE, a variation of single-sided polymerase chain reaction.

A method is described for quickly and reproducibly isolating genomic DNA contiguous with known DNA sequence by means of the polymerase chain reaction (PCR). Flanking genomic DNA is isolated using a biotinylated sequence-specific primer in combination with a generic hybrid primer that binds to a deoxyoligonucleotide sequence artificially added to the ends of the genomic DNA. Amplified sequences that include the biotinylated primer are purified from nonbiotinylated amplification products by binding to a solid-phase streptavidin matrix. The biotinylated amplification product(s) are subjected to a further round of amplification, after which they can be subcloned and analyzed. This technique was applied to the isolation of three intron-exon junctions. Verification of the identify of these junction sequences was accomplished by designing primers based on the intron sequences isolated by Biotin-RAGE, amplifying across the exon using these intron primers, and sequencing the PCR-generated product.     

An alternative genotyping method using dye-labeled universal primer to reduce unspecific amplifications

We proposed a modification the procedure of genotyping based in labeled universal primer and tailed primer. In the standard protocol, three primers are used in the same PCR reaction, a forward primer with tail added at the 5′ end of the identical sequence to labeled universal primer with dye-fluorescent and a reverse primer. Unfortunately, the choice of a labeled primer characterized by a large number of complementary sequences in target genomes (which is more probable in larger genomes) result in unspecific amplifications (false positive) can cause absence or decrease amplification of the locus of interest and also false interpretation of the analysis. However, identification of possible homologies between the primer chosen for labelling and the genome is rarely possible from the available DNA data bases. In our approach, cycling is interrupted for the addition of the labeled primer only during the final cycles, thus minimizing unspecific amplification and competition between primers, resulting in the more fidelity amplification of the target regions.     

Single universal primer multiplex ligation-dependent probe amplification with sequencing gel electrophoresis analysis

In this study, a novel single universal primer multiplex ligation-dependent probe amplification (SUP-MLPA) technique that uses only one universal primer to perform multiplex polymerase chain reaction (PCR) was developed. Two reversely complementary common sequences were designed on the 5′ or 3′ end of the ligation probes (LPs), which allowed the ligation products to be amplified through only a single universal primer (SUP). SUP-MLPA products were analyzed on sequencing gel electrophoresis with extraordinary resolution. This method avoided the high expenses associated with capillary electrophoresis, which was the commonly used detection instrument. In comparison with conventional multiplex PCR, which suffers from low sensitivity, nonspecificity, and amplification disparity, SUP-MLPA had higher specificity and sensitivity and a low detection limit of 0.1 ng for detecting single crop species when screening the presence of genetically modified crops. We also studied the effect of different lengths of stuffer sequences on the probes for the first time. Through comparing the results of quantitative PCR, the LPs with different stuffer sequences did not affect the ligation efficiency, which further increased the multiplicity of this assay. The improved SUP–MLPA and sequencing gel electrophoresis method will be useful for food and animal feed identification, bacterial detection, and verification of genetic modification status of crops.     

A one-step electrochemical method for DNA detection that utilizes a peroxidase-mimicking DNAzyme amplified through PCR of target DNA

A novel one-step electrochemical method for DNA detection is described. The procedure utilizes a reaction catalyzed by a peroxidase-mimicking DNAzyme to produce a product, which forms an insoluble precipitation layer on the surface of an electrode. A rationally designed forward primer, conjugated with a peroxidase DNAzyme complementary sequence at its 5′-end, is used for PCR amplification of target DNA. As a result, the DNAzyme sequence is produced by amplification only when the target DNA is present in the sample. The PCR product is then subjected to the precipitation reaction on the electrode surface using an electrolyte assay buffer containing 4-chloronaphthol, hydrogen peroxide, ferrocenemethanol, hemin, and 5′-lambdaexonuclease. Finally, analysis is carried out using Faradaic impedance spectroscopy. The impedance value was found to greatly increase when target DNA is present owing to the formation of a precipitation layer on the electrode surface caused by the catalytic action of the DNAzyme. In contrast, no impedance increase is observed when a control sample not containing target DNA is utilized. By employing this strategy, target DNA from Chlamydia trachomatis was reliably detected within a 10 min period following precipitation without the need for complicated secondary procedures. This effort has led to the development of a highly convenient electrochemical one-step method for DNA detection that utilizes a peroxidase-mimicking DNAzyme, which is specifically designed to undergo amplification during PCR of target DNA.     

A high-throughput genome-walking method and its use for cloning unknown flanking sequences

We developed a PCR-based high-throughput genome-walking protocol. The novelty of this protocol is in the random introduction of unique walker primer binding sites into different regions of the genome efficiently by taking advantage of the rolling circle mode of DNA synthesis by Phi29 DNA polymerase after annealing the partially degenerate primers to the denatured genomic DNA. The inherent strand-displacement activity of the Phi29 DNA polymerase displaces the 5′ ends of downstream strands and DNA synthesis continues, resulting in a large number of overlapping fragments that cover the whole genome with the unique walker adapter attached to the 5′ end of all the genomic DNA fragments. The directional genome walking can be performed using a locus-specific primer and the walker primer and Phi29 DNA polymerase-amplified genomic DNA fragments as template. The locus-specific primer will determine the position and direction of the genome walk. Two rounds of successive PCR amplifications by locus-specific and walker primers and their corresponding nested primers effectively amplify the flanking DNA fragments. The desired PCR fragment can be either cloned or sequenced directly using another nested, locus-specific primer. We successfully used this protocol to isolate and sequence 5′ flanking regions/promoters of selected plant genes.     

A novel method to perform genomic walks using a combination of single strand DNA circularization and rolling circle amplification

Characterization of regions flanking a known sequence within a genome, known as genome walking, is a cornerstone technique in modern genetic analysis. In the present work we have developed a new PCR-dependent, directional genome walking protocol based on the unique circularization property of a novel DNA ligase, CircLigase. In the first step, PCR based primer extension is performed using a phosphorylated primer, designed to extend from the boundary of the known sequence, into the flanking region. This linear amplification results in the generation of single-stranded (ss) DNA, which is then circularized using CircLigase. Using the hyperbranching activity of Phi29 DNA polymerase, the circular ssDNA is then linearized by rolling circle amplification, resulting in copious amounts of double stranded concatameric DNA. Nested primers are used to amplify the flanking sequence using inverse PCR. The products are resolved on an agarose gel and the bands whose mobility change due to the nested location of the primer combination used are identified, extracted, and cloned into a plasmid vector for sequencing. Empirical proof for this concept was generated on two antimicrobial biosynthetic genes in Pseudomonas sp. LBUM300. Using the hcnB and phlD genes as starting points, ca 1 kb of flanking sequences were successfully isolated. The use of locus specific primers ensured both directionality and specificity of the walks, alleviating the generation of spurious amplicons, typically observed in randomly primed walking protocols. The presented genome walking protocol could be applied to any microbial genome and requires only 100-150 bp of prior sequence information. The proposed methodology does not entail laborious testing of restriction enzymes or adaptor ligation. This is the first report of a successful application of the novel ligase enzyme, CircLigase for genomic walking purposes.     

A Novel and Simple PCR Walking Method for Rapid Acquisition of Long DNA Sequence Flanking a Known Site in Microbial Genome

Acquisition of flanking sequence adjacent to a known DNA site is an important task in microbial genome-related research. In this study, we developed a new method containing two rounds of PCR followed by cloning and sequencing. Firstly, specific primer (SP) is added into the reaction system for primary locus-specific linear amplification, and then a complex long primer (CLP) is added into the cooled reaction system for only one cycle. Amplification products from the first round of PCR are directly purified without electrophoresis, diluted, and used as the templates of the second PCR. Secondly, one long specific primer (LSP) and one long base-fixed primer (LFP) are adopted. The amplicons are purified for cloning and sequencing. The achievement of specific amplification for long flanking region mainly depends on ingenious and precise settings of PCR programs, structure design of CLP primer, adding of CLP primer after specific linear amplification, concentration ratio of CLP and SP primer, applying long primers, etc. Through this method, we successfully performed the long PCR walkings (>1.5 Kb) on rpoB gene of Vibrio vulnificus, transposon-like gene of V. alginolyticus, and sto gene of V. cholerae. The method provides a robust and simple strategy for rapid amplification of long unknown DNA fragments from microbes.     

Number and Accuracy of T-DNA Insertions in Transgenic Banana (Musa spp.) Plants Characterized by an Improved Anchored PCR Technique

Nineteen transgenic banana plants, produced via Agrobacterium-mediated transformation, were analyzed for the integration of T-DNA border regions using an improved anchored PCR technique. The method described is a relatively fast, three-step procedure (restriction digestion of genomic DNA, ligation of ‘vectorette’-type adaptors, and a single round of suppression PCR) for the amplification of specific T-DNA border-containing genomic fragments. Most transgenic plants carried a low number of inserts and the method was suitable for a detailed characterization of the integration events, including T-DNA border integrity as well as the insertion of non-T-DNA vector sequences, which occurred in 26% of the plants. Furthermore, the particular band pattern generated by four enzyme/primer combinations for each individual plant served as a fingerprint, allowing the identification of plants representing identical transformation events. Genomic Southern hybridization and nucleotide sequence analysis of amplification products confirmed the data obtained by anchored PCR. Sequencing of seven right or left border junction regions revealed different T-DNA processing events for each plant, indicating a relatively low frequency of precisely nicked T-DNA integration among the plants studied.     

MARA: a novel approach for highly multiplexed locus-specific SNP genotyping using high-density DNA oligonucleotide arrays

We have developed a locus-specific DNA target preparation method for highly multiplexed single nucleotide polymorphism (SNP) genotyping called MARA (Multiplexed Anchored Runoff Amplification). The approach uses a single primer per SNP in conjunction with restriction enzyme digested, adapter-ligated human genomic DNA. Each primer is composed of common sequence at the 5′ end followed by locus-specific sequence at the 3′ end. Following a primary reaction in which locus-specific products are generated, a secondary universal amplification is carried out using a generic primer pair corresponding to the oligonucleotide and genomic DNA adapter sequences. Allele discrimination is achieved by hybridization to high-density DNA oligonucleotide arrays. Initial multiplex reactions containing either 250 primers or 750 primers across nine DNA samples demonstrated an average sample call rate of ~95% for 250- and 750-plex MARA. We have also evaluated >1000- and 4000-primer plex MARA to genotype SNPs from human chromosome 21. We have identified a subset of SNPs corresponding to a primer conversion rate of ~75%, which show an average call rate over 95% and concordance >99% across seven DNA samples. Thus, MARA may potentially improve the throughput of SNP genotyping when coupled with allele discrimination on high-density arrays by allowing levels of multiplexing during target generation that far exceed the capacity of traditional multiplex PCR.     

Efficient amplification of genes involved in microbial secondary metabolism by an improved genome walking method

Genome walking is a commonly used technique for the identification of DNA sequences adjacent to known regions. Despite the development of various genome walking methods, nonspecific products are often produced in certain circumstances, especially when GC-rich DNA sequences are dealt with. To effectively resolve such technical issues, a simple nested polymerase chain reaction-based genome walking method has been developed by implementing a progressively decreased annealing temperature from 70°C to 47.5°C in the first round of amplification and a high annealing temperature of 65°C in the second round of amplification. During the entire process, a lower ramp rate of 1.5°C s⁻¹ and cooling rate of 2.5°C s⁻¹ are performed to reach the annealing temperature. Using this method, we successfully obtained the upstream and downstream sequences of three GC-rich genes involved in the biosynthetic pathways of secondary metabolites from two bacterial genomes. The efficient amplification of DNA target longer than 1.5 Kb with GC content up to 75.0% indicates that the present technique could be a valuable tool for the investigation of biosynthetic pathways of various secondary metabolites.     

Annealing control primer system for improving specificity of PCR amplification

A novel primer designed to improve the specificity of PCR amplification, called the annealing control primer (ACP), comprises a tripartite structure with a polydeoxyinosine [poly(dI)] linker between the 3' end target core sequence and the 5' end nontarget universal sequence. We show that this ACP linker prevents annealing of the 5' end nontarget sequence to the template and facilitates primer hybridization at the 3' end to the target sequence at specific temperatures, resulting in a dramatic improvement of annealing specificity. The effect of this linker is demonstrated by the incorporation of ACP sequences as primers during the amplification of target nucleotide sequence and as hybridization probes in the genotyping of single nucleotide polymorphisms. This is the first report to show that a poly(dI) linker between two different sequences of ACP forms a bubble-like structure and disrupts or destabilizes DNA duplex formation at certain annealing temperatures.