Quantitation of heparosan with heparin lyase III and spectrophotometry

Heparosan is Escherichia coli K5 capsule polysaccharide, which is the key precursor for preparing bioengineered heparin. A rapid and effective quantitative method for detecting heparosan is important in the large-scale production of heparosan. Heparin lyase III (Hep III) effectively catalyzes the heparosan depolymerization, forming unsaturated disaccharides that are measurable using a spectrophotometer at 232 nm. We report a new method for the quantitative detection of heparosan with heparin lyase III and spectrophotometry that is safer and more specific than the traditional carbazole assay. In an optimized detection system, heparosan at a minimum concentration of 0.60 g/L in fermentation broth can be detected.     

Chromosome evolution of Escherichia coli Nissle 1917 for high-level production of heparosan

Heparosan is a crucial-polysaccharide precursor for the chemoenzymatic synthesis of heparin, a widely used anticoagulant drug. Presently, heparosan is mainly extracted with the potential risk of contamination from Escherichia coli strain K5, a pathogenic bacterium causing urinary tract infection. Here, a nonpathogenic probiotic, E. coli strain Nissle 1917 (EcN), was metabolically engineered to carry multiple copies of the 19-kb kps locus and produce heparosan to 9.1 g/L in fed-batch fermentation. Chromosome evolution driven by antibiotics was employed to amplify the kps locus, which governed the synthesis and export of heparosan from EcN at 21 mg L⁻¹ OD⁻¹. The average copy number of kps locus increased from 1 to 24 copies per cell, which produced up to 104 mg L^-1 OD⁻¹ of heparosan in the shaking flask cultures of engineered strains. The following in-frame deletion of recA stabilized the recombinant duplicates of chromosomal kps locus and the productivity of heparosan in continuous culture for at least 56 generations. Fed-batch fermentation of the engineered strain EcN8 was carried out to bring the yield of heparosan up to 9.1 g/L. Heparosan from the fermentation culture was further purified at a 75% overall recovery. The structure of purified heparosan was characterized and further modified by N-sulfotransferase with 3′-phosphoadenosine-5′-phosphosulfate as the sulfo-donor. The analysis of element composition showed that heparosan was N-sulfated by over 80%. These results indicated that duplicating large DNA cassettes up to 19-kb, followed by high-cell-density fermentation, was promising in the large-scale preparation of chemicals and could be adapted to engineer other industrial-interest bacteria metabolically.     

E. coli K5 fermentation and the preparation of heparosan,a bioengineered heparin precursor

Heparosan is an acidic polysaccharide natural product, which serves as the critical precursor in heparin biosynthesis and in the chemoenzymatic synthesis of bioengineered heparin. Heparosan is also the capsular polysaccharide of Escherichia coli K5 strain. The current study was focused on the examination of the fermentation of E. coli K5 with the goal of producing heparosan in high yield and volumetric productivity. The structure and molecular weight properties of this bacterial heparosan were determined using polyacrylamide gel electrophoresis (PAGE) and Fourier transform mass spectrometry. Fermentation of E. coli K5 in a defined medium using exponential fed‐batch glucose addition with oxygen enrichment afforded heparosan at 15 g/L having a number average molecular weight of 58,000 Da and a weight average molecular weight of 84,000 Da. Biotechnol. Bioeng. 2010;107: 964–973. © 2010 Wiley Periodicals, Inc.     

Chaperone-assisted expression of KfiC glucuronyltransferase from <Emphasis Type="Italic">Escherichia coli</Emphasis> K5 leads to heparosan production in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21 in absence of the stabilisator KfiB

The heparosan synthase of Escherichia coli K5 is composed of the glycosyltransferases KfiA and KfiC which synthesize the polysaccharide heparosan (N-acetylheparosan). A third protein, KfiB, is required to stabilize the KfiAC complex in the bacteria and to transport this complex to the inner membrane where the initiation of polymerization occurs. In this report, we fused KfiC with the E. coli trigger factor (TF) to stabilize KfiC, thus activating the enzyme in the absence of KfiB. Different recombinant plasmids were constructed to compare the impact of the presence or absence of KfiB and the presence of the trigger factor as a fusion protein. Several E. coli BL21-derived strains were transformed with recombinant plasmids and cultivated in fed-batch conditions on minimal medium. The bTCA strain overexpressing fused TF-KfiC together with KfiA and KfiD, but lacking KfiB produced 1.5 g/L of total heparosan after 24 h of fed-batch cultivation. This heparosan was essentially intracellular early in the culture, providing evidence that KfiB primarily plays a role in the exportation process. However, over time, heparosan became mostly extracellular, likely due to passive diffusion or partial cell disruption upon product accumulation.     

Structure and biosynthesis gene cluster of the O-antigen of <Emphasis Type="Italic">Escherichia coli</Emphasis> O12

Two polysaccharides were isolated from Escherichia coli O12, the major being identified as the O12-antigen and the minor as the K5-antigen. The polysaccharides were studied by sugar analysis, Smith degradation, and one- and twodimensional ¹H and ¹³C NMR spectroscopy. As a result, the following structure of the O12-polysaccharide was elucidated, which, to our knowledge, has not been hitherto found in bacterial carbohydrates: →2)-β-D-Glcp-(1→6)-α-D-GlcpNAc(1→3)-α-L-FucpNAc-(1→3)-β-D-GlcpNAc-(1→. The →4)-β-D-GlcpA-(1→4)-α-D-GlcpNAc-(1→ structure established for the K5-polysaccharide (heparosan) is previously known. Functions of genes in the O-antigen biosynthesis gene cluster of E. coli O12 were assigned by comparison with sequences in the available databases and found to be consistent with the O12-polysaccharide structure.     

High cell density cultivation of a recombinant E. coli strain expressing a key enzyme in bioengineered heparin production

A bioengineered heparin, as a replacement for animal-derived heparin, is under development that relies on the fermentative production of heparosan by Escherichia coli K5 and its subsequent chemoenzymatic modification using biosynthetic enzymes. A critical enzyme in this pathway is the mammalian 6-O-sulfotransferase (6-OST-1) which specifically sulfonates the glucosamine residue in a heparin precursor. This mammalian enzyme, previously cloned and expressed in E. coli, is required in kilogram amounts if an industrial process for bioengineered heparin is to be established. In this study, high cell density cultivation techniques were exploited to obtain recombinant 6-OST-1. Physiological studies were performed in shake flasks to establish optimized growth and production conditions. Induction strategies were tested in fed-batch experiments to improve yield and productivity. High cell density cultivation in 7-l culture, together with a coupled inducer strategy using isopropyl β-d-1-thiogalactopyranoside and galactose, afforded 482 mg?l^?1 of enzyme with a biomass yield of 16.2 mg?g_cdw ^?1 and a productivity of 10.5 mg?l^?1?h^?1.     

Ozonolysis of the double bond of the unsaturated uronate residue in low-molecular-weight heparin and K5 heparosan

Ozone is known to add across and cleave carbon–carbon double bonds. Ozonolysis is widely used for the preparation of pharmaceuticals, for bleaching substances and for killing microorganisms in air and water sources. Some polysaccharides and oligosaccharides, such as those prepared using chemical or enzymatic β-elimination, contain a site of unsaturation. We examined ozonolysis of low-molecular-weight heparins (LMWHs), enoxaparin and logiparin, and heparosan oligo- and polysaccharides for the removal of the nonreducing terminal unsaturated uronate residue. 1D ¹H NMR showed that these ozone-treated polysaccharides retained the same structure as the starting polysaccharide, except that the C4–C5 double bond in the nonreducing end unsaturated uronate had been removed. The anticoagulant activity of the resulting product from enoxaparin and logiparin was comparable to that of the starting material. These results demonstrate that ozonolysis is an important tool for the removal of unsaturated uronate residues from LMWHs and heparosan without modification of the core polysaccharide structure or diminution of anticoagulant activity. This reaction also has potential applications in the chemoenzymatic synthesis of bioengineered heparin from Escherichia coli-derived K5 heparosan.     

Response surface optimization of the heparosan N-deacetylation in producing bioengineered heparin

The chemical step in the chemoenzymatic synthesis of bioengineered heparin has been examined and optimized statistically using a response surface methodology. A four factor, two level full factorial design experiment and a three factor Box-Behnken design were carried out. The goal was to establish a method to prepare N-sulfo, N-acetyl heparosan of the desired N-acetyl content, number average molecular weight, and in maximum yield by controlling the reactant concentrations, reaction time and reaction temperature. The response surface models obtained were used to predict the reaction conditions required to optimally prepare N-sulfo, N-acetyl heparosan from Escherichia coli generated heparosan starting material of different molecular weights.     

Heparosan Chain Characterization: Sequential Depolymerization of E. Coli K5 Heparosan by a Bacterial Eliminase Heparin Lyase III and a Bacterial Hydrolase Heparanase Bp to Prepare Defined Oligomers

Heparosan is a non-sulfated polysaccharide and potential applications include, chemoenzymatic synthesis of heparin and heparan sulfates. Heparosan is produced using microbial cells (natural producers or engineered cells). The characterization of heparosan isolated from both natural producers and engineered-cells are critical steps towards the potential applications of heparosan. Heparosan is characterized using 1) analysis of intact chain size and polydispersity, and 2) disaccharide composition. The current paper describes a novel method for heparosan chain characterization, using heparin lyase III (Hep-3, an eliminase from Flavobacterium heparinum) and heparanase Bp (Hep-Bp, a hydrolase from Burkholderia pseudomallei). The partial digestion of E. coli K5 heparosan with purified His-tagged Hep-3 results in oligomers of defined sizes. The oligomers (degree of polymerization from 2 to 8, DP2-DP8) are completely digested with purified GST-tagged Hep-Bp and analyzed using gel permeation chromatography. Hep-Bp specifically cleaves the linkage between d -glucuronic acid (GlcA) and N-acetyl-d -glucosamine (GlcNAc) but not the linkage between 4-deoxy-α-L-threo-hex-4-enopyranosyluronic acid (deltaUA) and GlcNAc, and results in the presence of a minor resistant trisaccharide (GlcNAc-GlcA-GlcNAc). This method successfully demonstrated the substrate selectivity of Hep-BP on heparosan oligomers. This analytical tool could be applied towards heparosan chain mapping and analysis of unnatural sugar moieties in the heparosan chain.     

A targeted proteomics toolkit for high-throughput absolute quantification of Escherichia coli proteins

Transformation of engineered Escherichia coli into a robust microbial factory is contingent on precise control of metabolism. Yet, the throughput of omics technologies used to characterize cell components has lagged far behind our ability to engineer novel strains. To expand the utility of quantitative proteomics for metabolic engineering, we validated and optimized targeted proteomics methods for over 400 proteins from more than 20 major pathways in E. coli metabolism. Complementing these methods, we constructed a series of synthetic genes to produce concatenated peptides (QconCAT) for absolute quantification of the proteins and made them available through the Addgene plasmid repository (www.addgene.org). To facilitate high sample throughput, we developed a fast, analytical-flow chromatography method using a 5.5-min gradient (10 min total run time). Overall this toolkit provides an invaluable resource for metabolic engineering by increasing sample throughput, minimizing development time and providing peptide standards for absolute quantification of E. coli proteins.     

The Interaction of N-Glycans in Fcγ Receptor I α-Chain with Escherichia coli K1 Outer Membrane Protein A for Entry into Macrophages: EXPERIMENTAL AND COMPUTATIONAL ANALYSIS*

Neonatal meningitis, caused by Escherichia coli K1, is a serious central nervous system disease. We have established that macrophages serve as permissive niches for E. coli K1 to multiply in the host and for attaining a threshold level of bacterial load, which is a prerequisite for the onset of the disease. Here, we demonstrate experimentally that three N-glycans in FcγRIa interact with OmpA of E. coli K1 for binding to and entering the macrophages. Adoptive transfer of FcγRIa^−/− bone marrow-derived macrophages transfected with FcγRIa into FcγRIa^−/− newborn mice renders them susceptible to E. coli K1-induced meningitis. In contrast, mice that received bone marrow-derived macrophages transfected with FcγRIa in which N-glycosylation sites 1, 4, and 5 are mutated to alanines exhibit resistance to E. coli K1 infection. Our molecular dynamics and simulation studies predict that N-glycan 5 exhibits strong binding at the barrel site of OmpA formed by loops 3 and 4, whereas N-glycans 1 and 4 interact with loops 1, 3, and 4 of OmpA at tip regions. Molecular modeling data also suggest no role for the IgG binding site in the invasion process. In agreement, experimental mutations in IgG binding site had no effect on the E. coli K1 entry into macrophages in vitro or on the onset of meningitis in newborn mice. Together, this integration of experimental and computational studies reveals how the N-glycans in FcγRIa interact with the OmpA of E. coli K1 for inducing the disease pathogenesis.     

Synonymous Rare Arginine Codons and tRNA Abundance Affect Protein Production and Quality of TEV Protease Variant

It has been identified that a TEV protease (TEVp) variant, TEVp^5M, displays improved solubility. Here, we constructed fifteen TEVp^5M variants with one or more of six rare arginine codons in the coding sequence replaced with abundant E. coli arginine codons. These codon variants expressed in either E. coli BL21 (DE3) or Rossetta (DE3) showed different solubility and activity. Supply of rare tRNAs increased the tendency of certain codon variants to form insoluble aggregates at early induction stage, as determined by the fused S-tag. About 32% increase in soluble protein production of M5 variant with four synonymously mutated arginine codons was identified in Rossetta (DE3) cells using GFP fusion reporter, comparable to that of TEVp^5M. After purification, two other codon variants from both E. coli strains exhibited less activity than TEVp^5M on cleaving the native or modified recognition sequence incorporated between GST and E. coli diaminopropionate ammonialyase by enzyme-coupled assay, whereas purified M5 variant showed activity similar to the TEVp^5M. Supply of rare tRNAs caused the decrease of activity of TEVp^5M and M5 by about 21%. Our results revealed that engineering of highly soluble TEVp variants can be achieved by the combined mutations of amino acid residues and optimization of specific rare codons, whereas simple augment of rare tRNAs abundance resulted in partial loss of activity.     

Efficient two-step chromatographic purification of penicillin acylase from clarified Escherichia coli ultrasonic homogenate

A two-step chromatographic purification procedure from clarified Escherichia coli ultrasonic homogenate was evaluated. The capture step included immobilized metal affinity chromatography with Cu²⁺ as metal ion. Two elution methods were performed: 1 M NH₄Cl and 0.01 M imidazole. Respectively, we obtained a different purification fold (16.5 to 3.15) and a similar result for the recovery of activity (90–99%). The best elution method was chosen for the procedure. The second step, hydrophobic interaction chromatography, gave a 3.8-fold purification with 77.7% of activity. The total procedure gave a 66-fold purification in relation to the initial crude extract with 70% for the recovery of activity and was performed without any conditioning step and at the same pH value.     

Isolation and identification of 5-methylthioribose from Escherichia coli B

5-Methylthioribose was isolated after incubation of Escherichia coli B in a glucose-salts medium. At least 60% of the radioactivity in absolute ethanol extracts of the residue from lyophilized medium supplemented with ³⁵SO₄²⁻ was located in two chromatographic areas that were identified as 5-methylthioribose and its sulfoxide. The sulfoxide was formed by oxidation of 5-methylthioribose during necessary processing of cultures and fractions. These compounds were characterized by functional group analysis and chromatographic comparison with authentic material. 5-Methylthioribose sulfoxide was isolated from 12 l of incubation medium of E. coli. After purification in three paper and one thin-layer chromatographic systems, 50 μg was obtained. The trimethylsilyl derivative of this compound was compared with that of authentic 5-methylthioribose sulfoxide. Gas chromatography and mass spectrometry confirmed the identity. This is the first report of 5-methylthioribose from a bacterium.     

The purification of beta-galactosidase-specific polysomes by affinity chromatography.

Affinity chromatography on a β-galactosidase substrate analog-Sepharose column was used to purify β-galactosidase-specific polysomes from E. coli. The purification was monitored by hybridization of [³H]uridine pulse-labeled RNA extracted from polysomes to p lac 5 DNA. A purification of at least 12-fold was obtained. Binding of lac polysomes to the column required the presence of Sepharose-bound substrate analog; salt and pH conditions favorable to β-galactosidase binding; and intact polyribosomes. It was calculated that 40–50% of the labeled mRNA recovered was lac RNA.     

Discovery of bacteriorhodopsins in Haloarchaeal species isolated from Indian solar salterns: deciphering the role of the N-terminal residues in protein folding and functional expression

Interesting optical and photochemical properties make microbial rhodopsin a promising biological material suitable for various applications, but the cost-prohibitive nature of production has limited its commercialization. The aim of this study was to explore the natural biodiversity of Indian solar salterns to isolate natural bacteriorhodopsin (BR) variants that can be functionally expressed in Escherichia coli. In this study, we report the isolation, functional expression and purification of BRs from three pigmented haloarchaea, wsp3 (water sample Pondicherry), wsp5 and K1^T isolated from two Indian solar salterns. The results of the 16S rRNA data analysis suggest that wsp3, wsp5 and K1^T are novel strains belonging to the genera Halogeometricum, Haloferax and Haloarcula respectively. Overall, the results of our study suggest that 17 N-terminal residues, that were not included in the gene annotation of the close sequence homologues, are essential for functional expression of BRs. The primary sequence, secondary structural content, thermal stability and absorbance spectral properties of these recombinant BRs are similar to those of the previously reported Haloarcula marismortui HmBRI. This study demonstrates the cost-effective, functional expression of BRs isolated from haloarchaeal species using E. coli as an expression host and paves the way for feasibility studies for future applications.     

Association of Escherichia coli O157:H7 with Houseflies on a Cattle Farm

The ecology of Escherichia coli O157:H7 is not well understood. The aims of this study were to determine the prevalence of and characterize E. coli O157:H7 associated with houseflies (HF). Musca domestica L. HF (n = 3,440) were collected from two sites on a cattle farm over a 4-month period and processed individually for E. coli O157:H7 isolation and quantification. The prevalence of E. coli O157:H7 was 2.9 and 1.4% in HF collected from feed bunks and a cattle feed storage shed, respectively. E. coli O157:H7 counts ranged from 3.0 × 10¹ to 1.5 × 10⁵ CFU among the positive HF. PCR analysis of the E. coli O157:H7 isolates revealed that 90.4, 99.2, 99.2, and 100% of them (n = 125) possessed the stx1, stx2, eaeA, and fliC genes, respectively. Large populations of HF on cattle farms may play a role in the dissemination of E. coli O157:H7 among animals and to the surrounding environment.