The length of a tetranucleotide repeat tract in Haemophilus influenzae determines the phase variation rate of a gene with homology to type III DNA methyltransferases

Haemophilus influenzae is an obligate commensal of the upper respiratory tract of humans that uses simple repeats (microsatellites) to alter gene expression. The mod gene of H. influenzae strain Rd has homology to DNA methyltransferases of type III restriction/modification systems and has 40 tetranucleotide (5'-AGTC) repeats within its open reading frame. This gene was found in 21 out of 23 genetically distinct H. influenzae strains, and in 13 of these strains the locus contained repeats. H. influenzae strains were constructed in which a lacZ reporter was fused to a chromosomal copy of mod downstream of the repeats. Phase variation occurred at a high frequency in strains with the wild-type number of repeats. Mutation rates were derived for similarly engineered strains, containing different numbers of repeats. Rates increased linearly with tract length over the range 17-38 repeat units. The majority of tract alterations were insertions or deletions of one repeat unit with a 2:1 bias towards contractions of the tract. These results demonstrate the number of repeats to be an important determinant of phase variation rate in H. influenzae for a gene containing a microsatellite.     

Identification of the Escherichia coli K-12 cpxA locus as a single gene: construction and analysis of biologically-active cpxA gene fusions

In the accompanying communication we showed that a 2 kb EcoRI-BamHI restriction fragment from the pfkA-rha interval of the Escherichia coli K-12 chromosome fully complemented a chromosomal cpxA mutation when the fragment was cloned in pBR325. The same fragment cloned in pBR322 lacked any complementing activity. We show here that minicells containing the pBR325 derivative (pRA310) synthesized a 33 kDa polypeptide, designated phi 33, that was not synthesized in minicells containing the pBR322 derivative (pRA311) or either of the parent plasmids. Synthesis of the phi 33 polypeptide did not occur in minicells containing Tn5 insertion alleles of pRA310 that inactivated its cpxA complementing activity. These insertions mapped within the vector cat (chloramphenicol acetyltransferase gene) sequence immediately adjacent to the EcoRI site of pRA310 and within the 700-800 bp of the cloned EcoRI-BamHI fragment immediately adjacent to the EcoRI site. Tn5 insertions located within the fragment but closer to the BamHI terminus affected neither the cpxA complementing activity of pRA310 nor synthesis of the phi 33 polypeptide in minicells. Plasmid pRA311 could be converted to a plasmid with cpxA complementing activity by cloning into its EcoRI site a restriction fragment containing a hybrid trp-lacUV5 promoter, the lacZ ribosome binding site, and the first eight lacZ codons.(ABSTRACT TRUNCATED AT 250 WORDS)     

Embryonic stem cell gene targeting using bacteriophage lambda vectors generated by phage-plasmid recombination.

Targeted mutagenesis is an extremely useful experimental approach in molecular medicine, allowing the generation of specialized animals that are mutant for any gene of interest. Currently the rate determining step in any gene targeting experiment is construction of the targeting vector (TV). In order to streamline gene targeting methods and avoid problems encountered with plasmid TVs, we describe the direct application of lambda phage in targeted mutagenesis. The recombination-proficient phage vector lambda2TK permits generation of TVs by conventional restriction-ligation or recombination-mediated methods. The resulting lambdaTV DNA can then be cleaved with restriction endonucleases to release the bacteriophage arms and can subsequently be electroporated directly into ES cells to yield gene targets. We demonstrate that in vivo phage-plasmid recombination can be used to introduce neo and lacZ - neo mutations into precise positions within a lambda2TK subclone via double crossover recombination. We describe two methods for eliminating single crossover recombinants, spi selection and size restriction, both of which result in phage TVs bearing double crossover insertions. Thus TVs can be easily and quickly generated in bacteriophage without plasmid subcloning and with little genomic sequence or restriction site information.     

Insertion of transposon P(lacW) with gradual expression of reporter genes

In Drosophila, insertions of the P?lacW? transposon led to uncommon expression patterns of the reporter genes white and lacZ: gene activity was gradually reduced in the neighboring cells along the dorsal-ventral or proximal-distal axes. Using in situ hybridization, the gradual gene expression was shown to be caused by P?lacW? insertions in regions 40A (lines G1 and G2) and 69C (line G3) of the Drosophila genome. The expression patterns of genes lacZ and white were similar in eye cells of each line. In salivary gland polytene cells of G3 flies, the lacZ expression was also gradually reduced, which indicates the existence of a mechanism maintaining the gene activity gradient during endomitosis.     

Insertion of a 27 amino acid viral peptide in different zones of Escherichia coliβ-galactosidase: Effects on the enzyme activity

Abstract Seven internal, putatively exposed regions of Escherichia coli β-galactosidase have been explored regarding their tolerance to insertions of large foreign peptides. Small sequence modifications, including amino acid substitutions and small deletions, were introduced into the lacZ gene to generate unique Bam HI restriction sites. By using these mutant genes, a 27 amino acid stretch reproducing the hypervariable loop of foot-and-mouth disease virus VP1 protein (site A) was further inserted in predefined regions of the enzyme. Among the 13 resulting engineered proteins only three, carrying sequence modifications within a short region, are active, with only moderate reduction of their specific activities. The identified permissive region, which involves amino acids 275 to 279, seems to be a flexible area that could be appropriate incorporate and study biological properties of heterologous peptides in correctly folded β-galactosidase chimeric proteins.     

Insertional mutagenesis of Bordetella pertussis adenylate cyclase.

We developed an improved method of linker insertion mutagenesis for introducing 2 or 16 codons into the Bordetella pertussis cyaA gene which encodes a calmodulin-dependent adenylate cyclase. A recombinant kanamycin resistance cassette, containing oligonucleotide linkers, was cloned in plasmids which carried a truncated cyaA gene, fused at its 3' end to the 5' end of the Escherichia coli lacZ gene, specifying the alpha-peptide. This construction permitted a double selection for in-frame insertions by using screening for kanamycin resistance and for lactose-positive phenotype, resulting from alpha-complementation. We showed that most of the two-amino acid insertions within the N-terminal moiety of the catalytic domain of adenylate cyclase abolished enzymatic activity and/or altered the stability of the protein. All two-amino acid insertions within the C-terminal part of adenylate cyclase resulted in fully stable and active enzymes. These results confirm the modular structure of the catalytic domain of adenylate cyclase, previously proposed on the basis of proteolytic studies. Two-amino acid insertions between residues 247-248 and 335-336 were shown to affect the calmodulin responsiveness of adenylate cyclase, suggesting that the corresponding region in the enzyme is involved in the binding of calmodulin or in the process of calmodulin activation. In addition, we have identified within the primary structure of adenylate cyclase several permissive sites which tolerate 16-amino acid insertions without interfering with the catalytic activity or calmodulin binding. By inserting foreign antigenic determinants into these permissive sites the resulting recombinant adenylate cyclase toxin could be used to deliver specific epitopes into antigen-presenting cells.     

Gene expression during development of Myxococcus xanthus. Analysis of the genes for protein S

Protein S is an abundant spore coat protein produced during fruiting body formation (development) of the bacterium Myxococcus xanthus. We have cloned the DNA which codes for protein S and have found that this DNA hybridizes to three protein S RNA species from developmental cells but does not hybridize to RNA from vegetative cells. The half-life of protein S RNA was found to be unusually long, about 38 minutes, which, at least in part, accounts for the high level of protein S synthesis observed during development. Hybridization of restriction fragments from cloned M. xanthus DNA to the developmental RNAs enabled us to show that M. xanthus has two directly repeated genes for protein S (gene 1 and gene 2) which are separated by about 10(3) base-pairs on the bacterial chromosome. To study the expression of the protein S genes in M. xanthus, eight M. xanthus strains were isolated with Tn5 insertions at various positions in the DNA which codes for protein S. The strains which contained insertions in gene 1 or between gene 1 and gene 2 synthesized all three protein S RNA species and exhibited normal levels of protein S on spores. In contrast, M. xanthus strains exhibited normal levels of protein S on spores. In contrast, M. xanthus strains with insertions in gene 2 had no detectable protein S on spores and lacked protein S RNA. Thus, gene 2 is responsible for most if not all of the production of protein S during M. xanthus development. M. xanthus strains containing insertions in gene 1, gene 2 or both genes, were found to aggregate and sporulate normally even though strains bearing insertions in gene 2 contained no detectable protein S. We examined the expression of gene 1 in more detail by constructing a fusion between the lacZ gene of Escherichia coli and the N-terminal portion of protein S gene 1 of M. xanthus. The expression of beta-galactosidase activity in an M. xanthus strain containing the gene fusion was shown to be under developmental control. This result suggests that gene 1 is also expressed during development although apparently at a much lower level than gene 2.     

Regulated expression by readthrough translation from a plasmid-encoded beta-galactosidase.

We have characterized expression of beta-galactosidase from a plasmid cloning vehicle, pBGP120, which carries most of the lacZ gene and contains a single EcoRI site near the end of lacZ. In addition, we have examined expression of heterologous DNA inserted at the position of the EcoRI site. The EcoRI site was shown to be within the sequence coding for beta-galactosidase and its precise location and phase were deduced. Insertion of heterologous EcoRI-generated DNA fragments altered the molecular weight of the plasmid-encoded beta-galactosidase polypeptide. Those insertions that were in the correct phase were expressed at a high level as a fused protein. The different forms of beta-galactosidase polypeptides produced by various hybrid plasmids were all stable proteins. The level of expression of the plasmid-encoded beta-galactosidase was several times higher than maximal expression of chromosome-encoded beta-galactosidase, suggesting that expression is proportional to gene copy number. The expression of the plasmid lacZ gene was controlled by cyclic AMP. When grown in a cya strain (DG74), expression was dependent on exogenous cyclic AMP. Although in normal strains there was insufficient lac repressor to inactivate all copies of the plasmid, repressor regulation was restored when the plasmid was grown in a strain (M96) that overproduces the lac repressor.     

Isolation and characterization of the lacA gene encoding beta-galactosidase in Bacillus subtilis and a regulator gene, lacR.

We have isolated transposon insertions in the lacA gene encoding an endogenous beta-galactosidase of Bacillus subtilis. Upstream of the putative operon containing lacA is a negative regulator, lacR, which encodes a product related to a family of regulators that includes the lactose repressor, lacI, of Escherichia coli. New strains with insertions in the lacA gene should be of use in studies using lacZ fusions in B. subtilis.     

A broad-host-range vector system for cloning and translational lacZ fusion analysis

A broad-host-range vector system for studying translational fusions was constructed. The region that retains the origin of replication, nic, mob, and rep genes of the broad-host-range plasmid RSF1010 was isolated as either an HincII or a PstI-PvuII restriction fragment. These restriction fragments were ligated to tetracycline, kanamycin, or streptomycin/spectinomycin resistance genes to generate plasmids pUI501, pUI511, pUI504, and pUI506. A functional lacZ gene lacking downstream lac operon sequences together with the lac promoter was constructed from plasmids pMC1871 and pUC18. This lacZ gene was inserted into pUI501 and pUI511 to generate plasmids pUI502, pUI503, pUI512, and pUI513. An oligodeoxynucleotide sequence that carries three unique blunt-end restriction sites was synthesized, annealed, and ligated in frame to the amino-terminal end of the lacZ gene in each of these plasmids. This multiple cloning sequence will allow translational fusions to the lacZ gene in all three reading frames. The stability of these plasmids and the expression of the lacZ gene in both Escherichia coli and Rhodobacter sphaeroides were studied.     

Reduced restriction of EcoK in the presence of the plasmid pKM ard+. II. Cloning of the gene ard

Plasmid pKM101 affects the I type restriction EcoK in E. coli. The gene ard responsible for alleviation of EcoK restriction was shown to be located within the BglIIB fragment of pKM101. Here we have cloned ard gene into high copy vectors pBR322 and pUC12. Plasmid pD12 was constructed by introducing into pUC12 a 1.87 kb HindIII-Pst fragment, carrying ard gene. Tn5 and Tn1000 insertions were obtained in the ard gene region.     

Simple method of cloning eukaryote DNA: production of certain new ribosomal genes of Drosophila

We propose a simple method which allows to receive a collection of clones containing recombinant plasmids. It is based on the ligation of the longer fragment of pBR332 formed by EcoRI and BamH1 with eukaryotic DNA (from Drosophila melanogaster embryo in this case) partially cleaved with EcoRI and BamHI. This approach gave us 10(4) colonies from 1 microgram of Drosophila DNA and 0.1 microgram of the BamHI--EcoRI "vector". About 0.5% of all clones carried the fragments of ribosomal genes with insertions in the 26S gene. Ribosomal genes lacking insertions did not enter the collection due to some peculiarities in their restriction map. The sites of cleavage are mapped in eight recombinant plasmide for HindIII, BamHI and EcoRI. These maps show that some insertions within 26S gene have not been cloned earlier. The mean length of cloned fragments is 11.8 kilobases, the mean number of EcoRI and BamHI restriction sites are 1.2 and 1.0, respectively. The electrophoretical screening of plasmids using cetyl trimethyl ammonium bromide was developed.