Separation of ursodeoxycholic acid from its isomeric mixture using core–shell molecular imprinting polymer

In order to separate ursodeoxycholic acid (UDCA) from its isomeric mixture, the molecular imprinting polymers (MIPs) were synthesized by using core–shell emulsion polymerization. In the porous imprinting polymer, ursodeoxycholic acid was used as imprinting molecule, acrylamide (AM) and α-methacrylic acid (MAA) were functional monomers, and CaCO₃ was used for the porogen in the polymerization to obtain large pore. Characterization of the MIP structure with IR spectra demonstrated the expected MIPs. Through adsorption and selectivity assays, AM as the functional monomer showed better separation efficiency than MAA, and nonspecific and specific adsorption capacities of MIP with AM were 43.52 and 13.93 mg/g, respectively. The separation factor of MIP with AM for UDCA was 2.20. Furthermore, MIP with AM could be applied to separate UDCA from the isomeric mixture by column chromatography successfully.     

New intrinsically radiopaque hydrophilic microspheres for embolization: synthesis and characterization

Polymeric particles currently used for embolization procedures have the disadvantage that they are radiolucent, that is, invisible on X-ray images, and consequently the interventional radiologist has to resort to angiography to (indirectly) monitor the fate of the particles. Here, we introduce intrinsically radiopaque hydrophilic microspheres. Since these microspheres can directly be visualized on X-ray images, using these microspheres for embolization purposes will allow superprecise location of the embolic material, both during and after the procedure. The microspheres, which are prepared by suspension polymerization, are based on the radiopaque monomer 2-[4-iodobenzoyl]-oxo-ethylmethacrylate and hydroxyethylmethacrylate (HEMA) and/or 1-vinyl-2-pyrrolidinone (NVP) as hydrophilic component. It has been shown that for clinically relevant X-ray visibility the spheres should contain at least 20 wt % iodine. At this iodine content, copolymerization with HEMA results in spheres that hardly imbibe water (EQ = 1.08). When HEMA is replaced by NVP, the volume swelling ratio can be significantly increased (to 1.33).     

Preparation and adsorption characteristic of polymeric microsphere with strong adsorbability for creatinine

Cross-linking terpolymer microspheres (HEMA/NVP/MBA; it can also be designated as HEMA/NVP because HEMA and NVP are main components) with an average diameter of 180 microm, were prepared via inverse suspension copolymerization by using 2-hydroxyethyl methacrylate (HEMA) and N-vinylpyrrolidone (NVP) as monomers and N,N'-methylene bisacrylamide (MBA) as cross-linked agent. The microsphere HEMA/NVP was chemically modified with 3,5-dinitrobenzoyl chloride (DNBC), and the functional microsphere DNBZ-HEMA/NVP, on which a great number of 3,5-dinitrobenzoate group (DNBZ) were bound, was obtained. The functional microsphere DNBZ-HEMA/NVP were characterized with FTIR and the chemical analysis method. The adsorption characteristics and mechanism of the absorption of DNBZ-HEMA/NVP for creatine was mainly studied. The results of static adsorption experiments show that the functional microsphere DNBZ-HEMA/NVP has very strong adsorption ability for creatinine, and the saturated adsorption amount is 25 mg/g. The adsorption capacity of the functional microsphere DNBZ-HEMA/NVP for creatinine is enhanced 20 times as against unmodified microsphere HEMA/NVP. The adsorption capacity is smaller, at lower and higher pH, and has a maximum as pH 8.5. The higher the salinity of the medium, the smaller the adsorption capacity. The adsorption capacity decreases with increasing temperature. The study results show that the adsorption of the microsphere DNBZ-HEMA/NVP for creatinine is ascribed to a chemical adsorption by driving of electrostatic interaction.     

Preparation and recognition performance of creatinine-imprinted material prepared with novel surface-imprinting technique

By adopting the novel surface molecular imprinting technique put forward by us not long ago, a creatinine molecule-imprinted material with high performance was prepared. The functional macromolecule polymethacrylic acid (PMAA) was first grafted on the surfaces of micron-sized silica gel particles in the manner of “grafting from” using 3-methacryloxypropyltrimethoxysilane (MPS) as intermedia, resulting in the grafted particles PMAA/SiO₂. Subsequently, the molecular imprinting was carried out towards the grafted macromolecule PMAA using creatinine as template and with ethylene glycol diglycidyl ether (EGGE) as crosslinker by right of the intermolecular hydrogen bonding and electrostatic interaction between the grafted PMAA and creatinine molecules. Finally, the creatinine-imprinted material MIP-PMAA/SiO₂ was obtained. The binding character of MIP-PMAA/SiO₂ for creatinine was investigated in depth with both batch and column methods and using N-hydroxysuccinimide and creatine as two contrast substances, whose chemical structures are similar to creatinine to a certain degree. The experimental results show that the surface-imprinted material MIP-PMAA/SiO₂ has excellent binding affinity and high recognition selectivity for creatinine. Before imprinting, PMAA/SiO₂ particles nearly has not recognition selectivity for creatinine, and the selectivity coefficients of PMAA/SiO₂ for creatinine relative to N-hydroxysuccinimide and creatine are only 1.23 and 1.30, respectively. However, after imprinting, the selectivity coefficients of MIP-PMAA/SiO₂ for creatinine in respect to N-hydroxysuccinimide and creatine are remarkably enhanced to 11.64 and 12.87, respectively, displaying the excellent recognition selectivity and binding affinity towards creatinine molecules.     

Chiral determination of cinchonine using an electrochemiluminescent sensor with molecularly imprinted membrane on the surfaces of magnetic particles

A novel molecular imprinting electrochemiluminescence sensor for detecting chiral cinchonine molecules was developed with a molecularly imprinted polymer membrane on the surfaces of magnetic microspheres. Fe₃O₄@Au nanoparticles modified with 6‐mercapto‐beta‐cyclodextrin were used as a carrier, cinchonine as a template molecule, methacrylic acid as a functional monomer and N ,N ′‐methylenebisacrylamide as a cross‐linking agent. Cinchonine was specifically recognized by the 6‐mercapto‐beta‐cyclodextrin functional molecularly imprinted polymer and detected based on enhancement of the electrochemiluminescence intensity caused by the reaction of tertiary amino structures of cinchonine molecules with Ru(bpy)₃²⁺. Cinchonine concentrations of 1 × 10^?10 to 4 × 10^?7 mol/L showed a good linear relationship with changes of the electrochemiluminescence intensity, and the detection limit of the sensor was 3.13 × 10^?11 mol/L. The sensor has high sensitivity and selectivity, and is easy to renew. It was designed for detecting serum samples, with recovery rates of 98.2% to 107.6%.     

Reversible lysozyme immobilization onto N,N′-bis-(3-(4-morpholino)-propyl)-3,4,9,10-perylenetetracarboxylic acid dimide (MPPDI) attached polymeric nanospheres

Novel hydrophobic nanospheres with an average size of 200 nm utilizing N,N′-bis-(3-(4-morpholino)-propyl)-3,4,9,10-perylenetetracarboxylic acid dimide (MPPDI) as a monomer were prepared by surfactant free emulsion polymerization of 2-hydroxyethyl methacrylate (HEMA) and MPPDI conducted in an aqueous dispersion medium. The nanospheres were used for the adsorption of lysozyme. The system parameters, such as effect of the adsorption conditions (i.e. enzyme concentration, medium pH, and temperature) and the reusability of the support were studied. Specific surface area of the nonporous nanospheres was found 664 m²/g. Poly(HEMA–MPPDI) nanospheres were characterized by Fourier transform infrared spectroscopy (FT-IR), elemental analysis and scanning electron microscopy (SEM). Then, poly(HEMA–MPPDI) nanospheres were used in the adsorption of lysozyme in batch system. Using an optimized adsorption protocol, 400 mg lysozyme/g nanosphere loading capacity was obtained. The adsorption phenomena appeared to follow a typical Langmuir isotherm. Lysozyme could be repeatedly adsorbed and desorbed with poly(HEMA–MPPDI) nanospheres without noticeable loss in the adsorption capacity.     

Protein-responsive imprinted polymers with specific shrinking and rebinding

Stimuli-responsive protein imprinted polymers were obtained via a combination of molecular imprinting and reversible stimuli-responsive polymer using lysozyme or cytochrome c as template, N-isopropylacrylamide (NIPA) as major monomer, methacrylic acid (MAA) and acrylamide (AAm) as functional co-monomers, and N,N-methylenebisacrylamide (MBAAm) as crosslinker. The molecularly imprinted polymers (MIPs) can respond not only to external stimuli such as temperature and salt concentration, but also to the corresponding template protein with significant specific volume shrinking. This specific shrinking behavior was attributed to the synergistic effect of multiple-site weak interactions (electrostatic force, hydrogen bonding and hydrophobic interaction) and the cavity effect. The MIPs showed highly selective adsorption of template proteins with specific shrinking compared with the non-imprinted polymers. The results indicated that the MIPs seemed to change shape to accommodate the conformation of the template protein leading to the formation of a shape complementary cavity.     

Adsorption of gamma-globulin, a model protein for antibody, on colloidal particles

The effect of surface properties on the adsorption of bovine gamma-globulin, a model protein for antibody, was studied. Polystyrene latex (PS), hydrophilic copolymer lattices of styrene/2-hydroxyethyl methacrylate [P(S/HEMA)], styrene/ methacrylic acid [P(S/MAA)] and methyl methacrylate/ 2-hydroxyethyl methacrylate [P(MMA/HEMA)], and colloidal silica were used. The adsorption isotherms of gamma-globulin on these colloidal particles were measured as a function of pH and ionic strength. The hydrophilic particles showed low affinities for gamma-globulin at alkaline pH, while PS showed high affinities for gamma-globulin over the whole range of pH and ionic strength. The gamma-globulin adsorption on hydrophilic particles was highly reversible with respect to the pH and ionic strength compared with that on PS. These differences indicate that the dominant driving forces of adsorption are related to the hydrophilicity of particles. The adsorption isotherms of all colloidal particles showed the plateau values, and the order of maximum values of plateau adsorption was P(S/MAA) > PS or P(S/HEMA), silica > P(MMA/HEMA). Thus, they were also affected by the charged groups and the hydrophilicity of the surfaces. On the other hand, the plateau values of all colloidal particles were more or less symmetrical with a maximum at around the isoelectric point of gamma-globulin at an ionic strength of 0.01. This behavior is attributed to the important role of the lateral interaction between the adsorbed molecules at low ionic strength.     

Room temperature synthesis and binding studies of solution‐processable histamine‐imprinted microspheres

Accurate quantification of histamine levels in food and in biological samples is important for monitoring the quality of food products and for the detection of pathophysiological conditions. In this study, solution processable histamine‐imprinted microspheres were synthesized at 30°C via dilute free radical phototochemical polymerization technique using ethylene glycol dimethacrylate (EGDMA) as the crosslinker and methacrylic acid (MAA) as the monomer. The processability of the resulting polymer is dictated by the monomer feed concentration (eg, 4 wt% 80:20 EGDMA:MAA formulation) and solvent (acetonitrile). Whereas, the particle size is influenced by the monomer feed concentration, the presence of template molecule, and independent of the crosslinker content. Evaluation of the binding performance of the photochemically imprinted polymers (PCP) with different crosslinker content (80 and 90 wt%) indicated that the selective binding capacity was notably higher in PCP‐80 (N= 16.0 μmol/g) compared to PCP‐90 (N= 10.1 μmol/g) when analyzed via frontal analysis capillary electrophoresis (FACE) using Freundlich isotherm. In addition, PCP‐80 microspheres are more selective toward histamine than conventional thermal polymers (CTP‐80) prepared at 60°C in the presence of structural analogs such as histidine, imidazole, and tryptamine under cross‐rebinding and competitive conditions. These results demonstrated that histamine‐selective imprinted polymers can be obtained readily using room temperature photochemical polymerization where these materials can be subsequently used as recognition element for optical‐based histamine sensing.     

Supermacroporous hydrophobic affinity cryogels for protein chromatography

N-Methacryloyl-l-tryptophan (MATrp) containing poly(2-hydroxyethyl methacrylate) based supermacroporous cryogel [PHEMATrp] was prepared for lysozyme purification form chicken egg white. MATrp was synthesized by reacting methacryloyl chloride with l-tryptophan methyl ester and provided hydrophobic functionality to the cryogel. PHEMATrp cryogel with 60–100 μm pore size was obtained by free radical polymerization of HEMA and MATrp having a specific surface area of 50 m²/g. PHEMATrp cryogel was characterized by swelling studies, FTIR and SEM. The equilibrium swelling ratios of the cryogels were 7.18 g H₂O/g for PHEMA and 6.99 g H₂O/g for PHEMATrp. Lysozyme adsorption experiments were investigated under different conditions in continuous system (i.e., medium pH, flow-rate, protein concentration, temperature, salt type). Lysozyme adsorption capacity of PHEMA and PHEMATrp cryogels from aqueous solutions was estimated as 2.9 and 46.8 mg/g (0.49 and 7.85 mg/mL), respectively. Lysozyme molecules were desorbed with 0.5 M ethylene glycol solution with 91% recovery. It was observed that PHEMATrp cryogel can be used without significant decrease in lysozyme adsorption capacity after five adsorption–desorption cycles. PHEMATrp cryogel was used for the purification of lysozyme from chicken egg white. Purity of lysozyme was estimated by SDS-PAGE. Possible denaturation of purified lysozyme was checked with fluorimetric measurements. Specific activity of the purified lysozyme was found as 43,140 U/mg using Micrococcus lysodeikticus as substrate.     

Surface imprinted bio-nanocomposites for affinity separation of a cellular DNA repair protein

Apurinic/apyrimidinic endonuclease 1 (APE1) is a multifunctional DNA repair protein localized in different subcellular compartments. The mechanisms responsible for the highly regulated subcellular localization and “interactomes” of this protein are not fully understood but have been closely correlated to the posttranslational modifications in different biological context. In this work, we attempted to develop a bio-nanocomposite with antibody-like properties that could capture APE1 from cellular matrices to enable the comprehensive study of this protein. By fixing the template APE1 on the avidin-modified surface of silica-coated magnetic nanoparticles, we first added 3-aminophenylboronic acid to react with the glycosyl residues of avidin, followed by addition of 2-acrylamido-2-methylpropane sulfonic acid as the second functional monomer to perform the first step imprinting reaction. To further enhance the affinity and selectivity of the binding sites, we carried out the second step imprinting reaction with dopamine as the functional monomer. After the polymerization, we modified the nonimprinted sites with methoxypoly (ethylene glycol) amine (mPEG-NH₂). The resulting molecularly imprinted polymer-based bio-nanocomposite showed high affinity, specificity, and capacity for template APE1. It allowed for the extraction of APE1 from the cell lysates with high recovery and purity. Moreover, the bound protein could be effectively released from the bio-nanocomposite with high activity. The bio-nanocomposite offers a very useful tool for the separation of APE1 from various complex biological samples.     

Partitioning of Proteins using a Hydrophobically Modified Ethylene Oxide/SDS Aqueous Two-phase System

Summary A novel aqueous two-phase system containing hydrophobically modified ethylene oxide (HM-EO) and sodium dodecyl sulphate (SDS) was developed to enhance the selectivity of protein partitioning in two phases. Phase diagrams of HM-EO/H₂O and HM-EO/SDS/H₂O were measured, and the mechanism of interaction between HM-EO polymer and the anionic surfactant sodium dodecyl sulphate (SDS) was also discussed. It was found that the improvement of selectivity of protein partitioning was related to the increase of electrostatic potential difference between the two phases because of the charged network formed by mixed micelles of HM-EO and SDS in the bottom phase. With bovine serum albumin (BSA) and lysozyme as model proteins, some factors, such as pH, SDS concentration, conductivity and temperature of the system, were investigated for the influences of protein partition in HM-EO/SDS/H₂O systems. The results showed that the addition of SDS not only changed the phase behaviour, but also played an important role in protein partitioning.     

Chemiluminescence sensor for sulfonylurea herbicide using molecular imprinted microspheres as recognition element

Uniform molecular imprinting microspheres were prepared using precipitation polymerization with thifensulfuron‐methyl (TFM) as template, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. TFM could be selectively adsorbed on the molecularly imprinted polymers (MIPs) matrix through the hydrogen bonding interaction and the adsorbed TFM could be sensed by its strikingly enhancing effect on the weak chemiluminescence (CL) reaction between luminol and hydrogen peroxide. On this basis, a novel CL sensor for the determination of TFM using MIPs as recognition elements was established. The logarithm of net CL intensity (ΔI) is linearly proportional to the logarithm of TFM concentration (C) in the range from 1.0 × 10^?9 to 5.0 × 10^?5 mol L^?1 with a detection limit of 8.3 × 10^?10 mol L^?1 (3σ). The results demonstrated that the MIP–CL sensor was reversible and reusable and that it could strikingly improve the selectivity and sensitivity of CL analysis. Furthermore, it is suggested that the CL enhancement of luminol–H₂O₂ by TFM might be ascribed to the enhancement effect of CO₂, which came from TFM hydrolysis in basic medium. Copyright © 2010 John Wiley & Sons, Ltd.     

2-Hydroxylethyl methacrylate (HEMA), a tooth restoration component, exerts its genotoxic effects in human gingival fibroblasts trough methacrylic acid, an immediate product of its degradation

HEMA (2-hydroxyethyl methacrylate), a methacrylate commonly used in dentistry, was reported to induce genotoxic effects, but their mechanism is not fully understood. HEMA may be degraded by the oral cavity esterases or through mechanical stress following the chewing process. Methacrylic acid (MAA) is the primary product of HEMA degradation. In the present work we compared cytotoxic and genotoxic effects induced by HEMA and MAA in human gingival fibroblasts (HGFs). A 6-h exposure to HEMA or MAA induced a weak decrease in the viability of HGFs. Neither HEMA nor MAA induced strand breaks in the isolated plasmid DNA, but both compounds evoked DNA damage in HGFs, as evaluated by the alkaline comet assay. Oxidative modifications to the DNA bases were monitored by the DNA repair enzymes Endo III and Fpg. DNA damage induced by HEMA and MAA was not persistent and was removed during a 120 min repair incubation. Results from the neutral comet assay indicated that both compounds induced DNA double strand breaks (DSBs) and they were confirmed by the γ-H2AX assay. Both compounds induced apoptosis and perturbed the cell cycle. Therefore, methacrylic acid, a product of HEMA degradation, may be involved in its cytotoxic and genotoxic action.     

The binding of resveratrol to monomer and fibril amyloid beta

As currently understood, Alzheimer’s disease (AD) is a chronic neurodegenerative disorder that is driven by the aggregation of amyloid beta (Aβ) protein. It has been shown that resveratrol (RES) may attenuate amyloid β peptide-induced toxicity, promote Aβ clearance and reduce senile plaques. However, it remains to be determined whether RES could interact directly with Aβ. The aim of the present study was to examine the direct binding of RES to monomer and fibril Aβ. Using surface plasmon resonance (SPR) and proton nuclear magnetic resonance (¹H NMR), our results identified the direct binding of RES to Aβ. The ability of RES to bind to both fibril and monomer Aβ(1–40 and 1–42) was further analyzed by SPR. The binding response of RES to fAβ(1–42) was higher than that to monomer Aβ(1–42), whereas the binding response of RES to fAβ(1–40) was lower than that to monomer Aβ(1–40). The K_D of RES for fibril Aβ(1–40 or 1–42) was higher than that for the corresponding monomer Aβ. Compared to the control compound Congo red (CR), the binding responses of RES to monomer Aβ(1–42) and Aβ(1–40) were stronger, but binding to fibril Aβ(1–42) was weaker, and the K_Ds of RES with both monomer and fibril Aβ(1–40) and Aβ(1–42) were higher than that of CR. When Aβ(1–40 or 1–42) was co-incubated with RES (50 μM), the thioflavin T fluorescence of the mixture was weakened, and the number and length of amyloid fibrils were decreased. Furthermore, the results of staining in consecutive brain slices from AD patients showed that RES (10⁻⁴ M) could stain senile plaques. These results indicated that RES could bind directly to Aβ in different states, which may provide new insight into the protective properties of RES against AD.     

A computational approach to studying monomer selectivity towards the template in an imprinted polymer

A computational approach was proposed to study monomer–template interactions in a molecularly imprinted polymer (MIP) in order to gain insight at the molecular level into imprinting polymer selectivity, regarding complex formation between template and monomer at the pre-polymerisation step. This is the most important step in MIP preparation. In the present work, chlorphenamine (CPA), diphenhydramine (DHA) and methacrylic acid (MAA), were chosen as the template, non-template, and monomer, respectively. The attained complexes were optimised, and changes in the interaction energies, atomic charges, IR spectroscopy results, dipole moment, and polarisability were studied. The effects of solvent on template–monomer interactions were also investigated. According to a survey of the literature, this is the first work in which dipole moment and polarisability were used to predict the types of interactions existing in pre-polymerisation complexes. In addition, the density functional tight-binding (DFTB) method, an approximate version of the density functional theory (DFT) method that was extended to cover the London dispersion energy, was used to calculate the interaction energy.     

Molecularly-imprinted microspheres for selective extraction and determination of melamine in milk and feed using gas chromatography–mass spectrometry

Molecularly-imprinted polymers in the form of microspheres were synthesized using the dispersion polymerization protocol; cyromazine was used as dummy template, while methacrylic acid, ethylene glycol dimethacrylate and acetonitrile (MeCN) were used as functional monomer, cross-linker, and porogen, respectively. When compared with the non-imprinted polymer, the molecularly-imprinted polymers (MIPs) showed outstanding affinity toward melamine in MeCN with a maximum binding concentration (B_max) of 53.20 nmol mg⁻¹ MIPs, imprinting effect of 4.6, and a dissociation constant (K_d) of 90.45 μM. After optimization of the molecularly-imprinted solid-phase extraction conditions, a new method was developed to determine the melamine in milk and feed with gas chromatography–mass spectrometry. The performance of this method has been evaluated in the tainted milk and feed in terms of recovery, precision, linearity, the limit of detection (LOD) and limit of quantitation (LOQ). Recovery ranged in samples from 93.1 to 101.3% with intra-day and inter-day relative standard deviation values below 5.34%. The LOD and LOQ of melamine in milk and feed were 0.01 μg mL⁻¹ (μg g⁻¹) and 0.05 μg mL⁻¹ (μg g⁻¹), respectively.     

Cellulose type chiral stationary phase based on reduced graphene oxide@silica gel for the enantiomer separation of chiral compounds

The graphene oxide (GO) was covalently coupled to the surfaces of silica gel (SiO₂) microspheres by amide bond to get the graphene oxide@silica gel (GO@SiO₂). Then, the GO@SiO₂ was reduced with hydrazine to the reduced graphene oxide@silica gel (rGO@SiO₂), and the cellulose derivatives were physically coated on the surfaces of rGO@SiO₂ to prepare a chiral stationary phase (CSP) for high performance liquid chromatography. Under the optimum experimental conditions, eight benzene‐enriched enantiomers were separated completely, and the resolution of trans‐stilbene oxide perfectly reached 4.83. Compared with the blank column of non‐bonded rGO, the separation performance is better on the new CSP, which is due to the existence of rGO to produce special retention interaction with analytes, such as π‐π stacking, hydrophobic effect, π‐π electron‐donor–acceptor interaction, and hydrogen bonding. Therefore, the obtained CSP shows special selectivity for benzene‐enriched enantiomers, improves separation selectivity and efficiency, and rGO plays a synergistic effect with cellulose derivatives on enantioseparation.     

Alginate microspheres encapsulated with autoclaved Leishmania major (ALM) and CpG-ODN induced partial protection and enhanced immune response against murine model of leishmaniasis

A suitable adjuvant and delivery system are needed to enhance efficacy of vaccines against leishmaniasis. In this study, alginate microspheres as an antigen delivery system and CpG-ODN as an immunoadjuvant were used to enhance immune response and induce protection against an experimental autoclaved Leishmania major (ALM) vaccine. Alginate microspheres were prepared by an emulsification technique and the characteristics of the preparation such as size, encapsulation efficiency and release profile of encapsulates were studied. Mean diameter of microspheres was determined using SEM (Scanning Electron Microscopy) and particle size analyzer. The encapsulation efficiency was determined using Lowry protein assay method. The integrity of ALM antigens was assessed using SDS–PAGE. Mean diameter of microspheres was 1.8 ± 1.0 μm. BALB/c mice were immunized three times in 3-weeks intervals with ALM + CpG-ODN loaded microspheres [(ALM + CpG)_ALG], ALM encapsulated alginate microspheres [(ALM)_ALG], (ALM)_ALG + CpG, ALM + CpG, ALM alone or PBS. The intensity of infection induced by L. major challenge was assessed by measuring size of footpad swelling. The strongest protection was observed in group of mice immunized with (ALM + CpG)_ALG. The groups of mice received (ALM + CpG)_ALG, (ALM)_ALG + CpG, (ALM)_ALG and ALM + CpG were also showed a significantly (P < 0.05) smaller footpad swelling compared with the group that received either ALM alone or PBS. The mice immunized with (ALM + CpG)_ALG or ALM + CpG showed the significantly (P < 0.05) highest IgG2a/IgG1 ratio. The IFN-γ level was significantly (P < 0.0001) highest in group of mice immunized with either (ALM)_ALG + CpG or ALM + CpG. It is concluded that alginate microspheres and CpG-ODN adjuvant when are used simultaneously induced protection and enhanced immune response against ALM antigen.     

Dynamic and supramolecular organisation of α-lactalbumin/lysozyme microspheres: A microscopic study

Apo α-lactalbumin (apo α-LA) and lysozyme (LYS), two homologous globular proteins have been shown to be able to interact and self-assemble to form microspheres. We report on the organisation and the mechanism of such protein assembly process using a variety of microscopic techniques. We demonstrated that proteins involved into apo α-LA/LYS microspheres exchange with those free in solution. The exchange process takes place from the periphery to the centre of the microspheres. The formed spherical particles observed after fixed incubation time were found to be either individual or aggregated according to the total protein concentration leading to structures with different size and morphology. It appears that protein assembly occurs throughout successive steps of aggregated spherical particles that reorganise into biggest isolated microspheres. Direct microscopic observations over time confirm that microspheres resulted from a reorganisation of aggregated, clustered nanospheres. We propose that the formation of apo α-LA/LYS microspheres follows an “aggregation–reorganisation” mechanism.