An anti-hapten camelid antibody reveals a cryptic binding site with significant energetic contributions from a nonhypervariable loop

Conventional anti-hapten antibodies typically bind low-molecular weight compounds (haptens) in the crevice between the variable heavy and light chains. Conversely, heavy chain-only camelid antibodies, which lack a light chain, must rely entirely on a single variable domain to recognize haptens. While several anti-hapten VHHs have been generated, little is known regarding the underlying structural and thermodynamic basis for hapten recognition. Here, an anti-methotrexate VHH (anti-MTX VHH) was generated using grafting methods whereby the three complementarity determining regions (CDRs) were inserted onto an existing VHH framework. Thermodynamic analysis of the anti-MTX VHH CDR1-3 Graft revealed a micromolar binding affinity, while the crystal structure of the complex revealed a somewhat surprising noncanonical binding site which involved MTX tunneling under the CDR1 loop. Due to the close proximity of MTX to CDR4, a nonhypervariable loop, the CDR4 loop sequence was subsequently introduced into the CDR1-3 graft, which resulted in a dramatic 1000-fold increase in the binding affinity. Crystal structure analysis of both the free and complex anti-MTX CDR1-4 graft revealed CDR4 plays a significant role in both intermolecular contacts and binding site conformation that appear to contribute toward high affinity binding. Additionally, the anti-MTX VHH possessed relatively high specificity for MTX over closely related compounds aminopterin and folate, demonstrating that VHH domains are capable of binding low-molecular weight ligands with high affinity and specificity, despite their reduced interface.     

Affinity transfer to a human protein by CDR3 grafting of camelid VHH

VHH is the binding domain of the IgG heavy chain. Some VHHs have an extremely long CDR3 that contributes to antigen binding. We studied the antigen binding ability of CDR3 by grafting a CDR3 from an antigen-binding VHH onto a nonbinding VHH. cAb-CA05-(1RI8), the CDR3-grafted VHH, had an antigen-binding ability. To find a human scaffold protein acceptable for VHH CDR3 grafting, we focused on the conserved structure of VHH, especially the N-terminal and C-terminal amino acid residues of the CDR3 loop and the Cys residue of CDR1. Human origin protein structures with the same orientation were searched in PDB and ubiquitin was selected. Ubi-(1RI8), the CDR3-grafted ubiquitin, had antigen-binding ability, though the affinity was relatively low compared to cAb-CA05-(1RI8). The thermodynamic parameters of Ubi-(1RI8) binding to HEWL were different from cAb-CA05-(1RI8). Hydrogen-deuterium exchange experiments showed decreased stability around the CDR3 grafting region of Ubi-(1RI8), which might explain the decreased antigen-binding ability and the differences in thermodynamic properties. We concluded that the orientation of the CDR3 sequence of Ubi-(1RI8) could not be reconstructed correctly.     

Characterisation of a monoclonal antibody and its use in the immunoaffinity purification of penicillin-binding protein 2'' of methicillin-resistant Staphylococcus aureus

The additional penicillin-binding protein (PBP) 2' that is important in determining intrinsic resistance in methicillin-resistant strains of Staphylococcus aureus (MRSA) has been purified by affinity chromatography using monoclonal antibodies. Monoclonal antibody 1/423.10.351 reacted in ELISA with detergent extracts of membranes from resistant organisms, but not in immunoblots with PBP 2' separated by SDS-PAGE. Immunoprecipitation experiments showed that antibody 1/423.10.351 reacted with PBP 2' in detergent extracts. The latter antibody, covalently coupled to protein A-Sepharose through the Fc region, served as an affinity matrix to purify PBP 2'. The PBP was detected in immunoblots using a second monoclonal antibody, 2/401.43. Conjugation of this antibody with alkaline phosphatase afforded more rapid detection of PBP 2' for the immunological detection of PBP 2' both in affinity-purified fractions and in resistant strains.     

Structural understanding of stabilization patterns in engineered bispecific Ig‐like antibody molecules

Bispecific immunoglobulin‐like antibodies capable of engaging multiple antigens represent a promising new class of therapeutic agents. Engineering of these molecules requires optimization of the molecular properties of one of the domain components. Here, we present a detailed crystallographic and computational characterization of the stabilization patterns in the lymphotoxin‐beta receptor (LTβR) binding Fv domain of an anti‐LTβR/anti‐TNF‐related apoptosis inducing ligand receptor‐2 (TRAIL‐R2) bispecific immunoglobulin‐like antibody. We further describe a new hierarchical structure‐guided approach toward engineering of antibody‐like molecules to enhance their thermal and chemical stability. Proteins 2009. © 2009 Wiley‐Liss, Inc.     

Multi-component immunoaffinity subtraction chromatography: an innovative step towards a comprehensive survey of the human plasma proteome

In order to discover novel protein markers indicative of disease processes or drug effects, the proteomics technology platform most commonly used consists of high resolution protein separation by two-dimensional electrophoresis (2-DE), mass spectrometric identification of proteins from stained gel spots and a bioinformatic data analysis process supported by statistics. This approach has been more successful in profiling proteins and their disease- or treatment-related quantitative changes in tissue homogenates than in plasma samples. Plasma protein display and quantitation suffer from several disadvantages: very high abundance of a few proteins; high heterogeneity of many proteins resulting in long charge trains; crowding of 2-DE separated protein spots in the molecular mass range between 45-80 kD and in the isoelectric point range between 4.5 and 6. Therefore, proteomic technologies are needed that address these problems and particularly allow accurate quantitation of a larger number of less abundant proteins in plasma and other body fluids. The immunoaffinity-based protein subtraction chromatography (IASC) described here removes multiple proteins present in plasma and serum in high concentrations effectively and reproducibly. Applying IASC as an upfront plasma sample preparation process for 2-DE, the protein spot pattern observed in gels changes dramatically and at least 350 additional lower abundance proteins are visualized. Affinity-purified polyclonal antibodies (pAbs) are the immunoaffinity reagents used to specifically remove the abundant proteins such as albumin, immunoglobulin G, immunoglobulin A, transferrin, haptoglobin, alpha-1-antitrypsin, hemopexin, transthyretin, alpha-2-HS glycoprotein, alpha-1-acid glycoprotein, alpha-2-macroglobulin and fibrinogen from human plasma samples. To render the immunoaffinity subtraction procedure recyclable, the pAbs are immobilized and cross-linked on chromatographic matrices. Antibody-coupled matrices specific for one protein each can be pooled to form mixed-bed IASC columns. We show that up to ten affinity-bound plasma proteins with similar solubility characteristics are eluted from a mixed-bed column in one step. This facilitates automated chromatographic processing of plasma samples in high throughput, which is desirable in proteomic disease marker discovery projects.     

Analytical characterization of a monoclonal antibody therapeutic reveals a three-light chain species that is efficiently removed using hydrophobic interaction chromatography

Size exclusion high performance liquid chromatography analysis of a human monoclonal antibody (mAb) showed the presence of a new species that eluted with a retention time between the dimeric and monomeric species of the antibody. Extensive characterization of this species, referred to as “shoulder,” indicated that it was a mAb containing an extra light chain and had a molecular weight of approximately 175 kDa. The extra light chain was found to be non-covalently associated with the Fab portion of the protein. The relative amount of shoulder (typically 1−3% of the total mAb present) varied with the Chinese hamster ovary cell line producing the mAb and was not influenced by the growth conditions. Our three-step mAb purification platform using protein A, anion exchange, and cation exchange process steps was successful at removing dimer and higher and lower molecular weight species, but not the shoulder impurity. It was found that hydrophobic interaction chromatography could be used in place of cation exchange to exploit the subtle differences in hydrophobicity between monomer and shoulder. We developed an antibody polishing process using Butyl Sepharose HP resin that is capable of removing the majority of high and low molecular weight impurities yielding 99% pure mAb monomer, virtually devoid of the shoulder species, with a step recovery of about 80%.     

Redesigning of anti‐c‐Met single chain Fv antibody for the cytoplasmic folding and its structural analysis

Typically, single chain Fv antibodies are unable to fold properly under a reducing cytoplasm because of the reduction of disulfide bonds. The inability to fold limits both the production of the functional scFvs and their targeting against antigens, which are generally executed in a reducing cytoplasm. In this study, the target scFv CDR was grafted with stable human consensus framework sequences, which enabled the generation of a foldable scFv in a reducing cytoplasm of Escherichia coli. Additionally, the structural features affecting the folding efficiency of the engineered scFv were identified by analyzing the predicted structure. An anti‐c‐Met scFv, which was a cytoplasmic non‐foldable protein, was redesigned as the model system. This study confirmed that the engineered anti‐c‐Met scFv was folded into its native form in the cytoplasm of E. coli BL21(DE3) without a significant loss in the specific binding activity against c‐Met antigen. The structures of the wild‐type anti‐c‐Met scFv and the engineered scFv were predicted using homology modeling. A comparative analysis based on the sequence and structure showed that the hydrophobicity of 12 solvent exposed residues decreased, and two newly formed salt bridges might have improved the folding efficiency of the engineered scFv under the reducing condition. Biotechnol. Bioeng. 2010; 106: 367–375. © 2010 Wiley Periodicals, Inc.     

Production and characterization of a monoclonal antibody for Pefloxacin and mechanism study of antibody recognition

In this report, an artificial antigen (PFLX–BSA: Pefloxacin connected bovine serum albumin) was successfully prepared. The monoclonal antibody against pefloxacin was produced and characterized using a direct competitive ELISA. The linear range of detection was 0.115–6.564 µg/L. The limit of detection defined as IC₁₅ was 0.170 ± 0.05 µg/L and the IC₅₀ was 0.902 ± 0.03 µg/L. The antibody variable region genes were amplified, assembled, and sequenced. A three–dimensional structural model of the variable region was constructed to study the mechanism of antibody recognition using molecular docking analysis. Three predicted essential amino acids, Thr53, Arg97 of heavy chain and Thr52 of light chain, were mutated to verify the theoretical model. Three mutants lost binding activity signi?cantly against pefloxacin as predicted. These may provide useful insights for studying antigen–antibody interaction mechanisms to improve antibody affinity maturation in vitro.     

Pharmacological characterization and immunoaffinity purification of metabotropic glutamate receptor from Drosophila overexpressed in Sf9 cells

Metabotropic glutamate receptors (mGluRs) play important roles in the function and regulation of the central nervous system. Structural studies are necessary for the detailed understanding of their mechanisms of action. However, overexpression and purification of functional receptors in quantities required for these studies proves to be a major challenge. In this study we report the overexpression of a Drosophila melanogaster mGluR (DmGluRA) by using a baculovirus-insect cell expression system. Expression was tested in two different insect cell hosts (Sf9 and Hi5) and analyzed by performing expression kinetics. Pharmacological characterization of the recombinant receptor by radioactive glutamate binding assays showed a profile similar to group II mGluRs, as previously reported, when the receptor was expressed in mammalian systems. The B(max) value reached 11 pM receptor/mg Sf9-membrane protein. A monoclonal antibody against DmGluRA was generated by genetic immunization and used to purify the receptor.     

Development and characterization of a chitosan-supported immunoaffinity chromatography column for the selective extraction of methandrostenolone from food and feed samples

The development of a chitosan-supported immunoaffinity chromatography (IAC) column and its application to the selective extraction of methandrostenolone (MA) from food and feed samples were described in this paper. Using hybridoma technique, a monoclonal antibody (mAb) against MA was produced. The IAC column was prepared by coupling the produced antibody with crosslinked chitosan. Scanning electron microscopy and IR spectroscopy was used to characterize the chitosan crosslinking and antibody coupling. 2% and 90% methanol were respectively selected as loading and eluting solution by optimization. The maximum capacity of the column for MA was 1790 ng/mL gel. The extraction recoveries of the column for MA at three different spiked concentrations ranged from 83.7 to 98.5%. After 2 cycles of usage, the column capacity and extraction recovery still remained 84.6% and 80.5%. To further verify the effect of matrix on the IAC cleanup, MA-fortified food and feed samples were extracted using the prepared IAC column, and MA recovery rates were found to be 86.2% and 70.4%, respectively.     

Role of the non‐hypervariable FR3 D‐E loop in single‐domain antibody recognition of haptens and carbohydrates

Single‐domain antibodies (sdAbs), the variable domains of camelid heavy chain‐only antibodies, are generally thought to poorly recognize nonproteinaceous small molecules and carbohydrates in comparison with conventional antibodies. However, the structures of anti‐methotrexate, anti‐triclocarban and anti‐cortisol sdAbs revealed unexpected contributions of the non‐hypervariable “CDR4” loop, formed between β‐strands D and E of framework region 3, in binding. Here, we investigated the potential role of CDR4 in sdAb binding to a hapten, 15‐acetyl‐deoxynivalenol (15‐AcDON), and to carbohydrates. We constructed and panned a phage‐displayed library in which CDR4 of the 15‐AcDON‐specific sdAb, NAT‐267, was extended and randomized. From this library, we identified one sdAb, MA‐232, bearing a 14‐residue insertion in CDR4 and showing improved binding to 15‐AcDON by ELISA and surface plasmon resonance. On the basis of these results, we constructed a second set of phage‐displayed libraries in which the CDR4 and other regions of three hapten‐ or carbohydrate‐binding sdAbs were diversified. With the goal of identifying sdAbs with novel glycan‐binding specificities, we panned the library against four tumor‐associated carbohydrate antigens but were unable to enrich binding phages. Thus, we conclude that while CDR4 may play a role in binding of some rare hapten‐specific sdAbs, diversifying this region through molecular engineering is probably not a general solution to sdAb carbohydrate recognition in the absence of a paired V_L domain.     

Improved protein A resin for antibody capture in a continuous countercurrent tangential chromatography system

Continuous countercurrent tangential chromatography (CCTC) enables steady-state continuous bioprocessing with low-pressure operation and high productivity. CCTC has been applied to initial capture of monoclonal antibodies (mAb) from clarified cell culture harvest and postcapture polishing of mAb; however, these studies were performed with commercial chromatography resins designed for conventional column chromatography. In this study, a small particle size prototype agarose resin (20–25 µm) with lower cross-linking was co-developed with industrial partner Purolite and tested with CCTC. Due to increased binding capacity and faster kinetics, the resulting CCTC process showed more than a 2X increase in productivity, and a 2X reduction in buffer consumption over commercial protein A resins used in previous CCTC studies, as well as more than a 10X productivity increase versus conventional column operation. Single-pass tangential flow filtration was integrated with the CCTC system, enabling simple control of eluate concentration. A scale-up exercise was conducted to provide a quantitative comparison of CCTC and batch column chromatography. These results clearly demonstrate opportunities for using otherwise unpackable soft small particle size resins with CCTC as the core of a continuous bioprocessing platform.     

Isolation and characterization of a novel scFv antibody fragments specific for Hsp70 as a tumor biomarker

Many studies have shown that more than 50% of tumors express heat shock protein 70 kDa (Hsp70) at the plasma membrane surface while not seen in normal cells, therefore it is a promising therapeutic target in human cancers. Hence, we used phage display technology to produce a single-chain fragment variable (scFv) antibody against human Hsp70. For this, a target peptide from human Hsp70 was designed using bioinformatics studies and was chemically synthesized. Then, the selection was performed using four rounds of biopanning with a stepwise decreased amount of the target peptide. Fourteen positive scFv clones were selected using monoclonal phage enzyme-linked immunosorbent assay screening, which was further characterized by means of the polymerase chain reaction and DNA sequencing. Among them, the G6 clone was selected to express scFv into the Escherichia coli. Expression and purification of the scFv shown by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and confirmed by Western blot analysis. In silico analysis confirmed specific binding of the scFv to Hsp70 in CDR regions. The specificity of the scFv measured by surface plasmon resonance and immunofluorescence of the A549 human lung carcinoma cell line confirmed the in vitro function of the scFv. Based upon these findings, we propose a novel anti-human Hsp70 scFv as potential immunotherapy agents that may be translated into preclinical/clinical applications.     

Production and characterization of a monoclonal antibody (BBH5) directed to ganglioside lactone

The occurrence of lactones in various ganglioside preparations has been clearly demonstrated, yet the natural occurrence of ganglioside lactones in cells and tissues has been the subject of long debate, since lactones can be formed readily during preparation of gangliosides. We now report the generation of a monoclonal antibody (BBH5) that reacts specifically with lactones of disialogangliosides having the NeuAc2-8NeuAc2-3Gal sequence, but does not crossreact with the parent ganglioside. The specificity of the antibody resides on the first lactone ring between two sialic acid residues but not on the second lactone ring between sialic acid and galactose, as evidenced by reactivity with lactonized GD_1b having the first lactone ring (L1), and by reactivity with lactonized polysialic acid homo-oligomers ([NeuAc2-8] _n NeuAc). The sialic acid carboxyl involved in the lactone ring was unequivocally determined after ammonolysis followed by methylation and fast atom bombardment mass spectrometry. The antibody BBH5 thus provides a novel tool for studies of the natural occurrence of lactones in cells and tissues.Abbreviations BSA bovine serum albumin - CM chloroform-methanol - CMW chloroform-methanol-water - FAB-MS fast atom bombardment mass spectrometry - IHW isopropanol-hexane-water - MAb monoclonal antibody - PBS phosphate-buffered saline - TLC thin layer chromatography     

Online immunoaffinity liquid chromatography/tandem mass spectrometry determination of a type II collagen peptide biomarker in rat urine: Investigation of the impact of collision-induced dissociation fluctuation on peptide quantitation

Proteolytic fragments of type II collagen, a major component of joint tissue, have recently been identified as biomarkers for osteoarthritis, a progressive disease associated with cartilage degeneration. A liquid chromatography/tandem mass spectrometry (MS/MS) assay that utilizes online immunoaffinity chromatography and column switching was developed in our laboratory for the neoepitope of type II collagen (NET2C). During method development, peptide collision-induced dissociation (CID) was found to be a significant source of assay variation, which exceeded 10% CV, despite the fact that a stable-isotope-labeled (SIL) internal standard was used to minimize imprecision. This phenomenon was studied in detail using peptides and associated SIL internal standards of varying lengths and amino acid compositions. Variability in peptide CID necessitated the monitoring of multiple MS/MS transitions to obtain acceptable assay precision. The assay was subsequently validated to measure NET2C concentrations in rat urine over the range of 0.1 to 10 ng/mL. The interday accuracy and precision ranged from 3.9 to 13.1 (%CV) and 10.7 to 5.3 (%RE), respectively, across the range of validated concentrations. A specific application of the assay is presented in which the role of estrogen deficiency in the development and progression of osteoarthritis was investigated. In this study, the effect of estrogen on lowering NET2C concentrations in urine in ovariectomized rats was demonstrated.     

Hybrid optimization of preparative chromatography for a ternary monoclonal antibody mixture

In the purification of monoclonal antibodies, ion-exchange chromatography is typically used among the polishing steps to reduce the amount of product-related impurities such as aggregates and fragments, whilst simultaneously reducing HCP, residual Protein A and potential toxins and viruses. When the product-related impurities are difficult to separate from the products, the optimization of these chromatographic steps can be complex and laborious. In this paper, we optimize the polishing chromatography of a monoclonal antibody from a challenging ternary feed mixture by introducing a hybrid approach of the simplex method and a form of local optimization. To maximize the productivity of this preparative bind-and-elute cation-exchange chromatography, wide ranges of the three critical operational parameters—column loading, the initial salt concentration, and gradient slope—had to be considered. The hybrid optimization approach is shown to be extremely effective in dealing with this complex separation that was subject to multiple constraints based on yield, purity, and product breakthrough. Furthermore, it enabled the generation of a large knowledge space that was subsequently used to study the sensitivity of the objective function. Increased design space understanding was gained through the application of Monte Carlo simulations. Hence, this work proposes a powerful hybrid optimization method, applied to an industrially relevant process development challenge. The properties of this approach and the results and insights gained, make it perfectly suited for the rapid development of biotechnological unit operations during early-stage bioprocess development.     

Expression and characterization of a humanized cocaine-binding antibody

The murine immunoglobulin G (IgG) cocaine-binding monoclonal antibody (mAb), GNC92H2, is notable for its exquisite specificity for cocaine, as opposed to chemically-related cocaine metabolites, and for its moderately high affinity (K(d) approximately 200 nM) for cocaine. Recently, we described the crystal structure of a mouse/human chimeric Fab construct at 2.3 A resolution. Herein, we report the successful framework humanization of a single-chain Fv (scFv) GNC92H2 construct without loss of affinity for cocaine. In brief, we compared the mAb GNC92H2 sequence to human antibody sequences, and used structure-based design to incorporate mutations (total = 49) that would humanize the framework region without affecting the overall shape of the binding pocket or the key cocaine-contact residues. The codons of the rationally designed sequence were optimized for E. coli expression, and the gene was synthesized by a de novo PCR reaction using 14 overlapping primers. Expression of the scFv construct was significantly improved in E. coli by fusion to thioredoxin. Intriguingly, this construct apparently refolds to form soluble active antibody in the reducing environment of the cytoplasm. Competitive ELISA and equilibrium dialysis demonstrated comparable binding activity between the humanized scFv and the whole IgG. The successful humanization of mAb GNC92H2 should enhance its potential therapeutic value by reducing its overall. immunogenicity.     

Quantitation of soluble aggregates in recombinant monoclonal antibody cell culture by pH-gradient protein A chromatography

Monoclonal antibodies (mAbs) produced from mammalian cell culture may contain significant amounts of dimers and higher order aggregates. Quantitation of soluble aggregates in the cell culture is time-consuming and labor-intensive, usually involving a purification step to remove the impurities that interfere with the subsequent size exclusion chromatography (SEC) analysis. We have developed a novel pH-gradient protein A chromatography for rapid, non-size based separation of the aggregates in mAb cell culture samples. Our results demonstrate that this method has excellent correlation with SEC and can be applied to both human immunoglobulin gamma 1 (IgG1) and IgG2 antibodies. This approach can be useful in the quantitation of soluble aggregates in crude cell culture samples.