Polysaccharide Lyase: Molecular Cloning, Sequencing, and Overexpression of the Xanthan Lyase Gene of Bacillus sp. Strain GL1

When grown on xanthan as a carbon source, the bacterium Bacillus sp. strain GL1 produces extracellular xanthan lyase (75 kDa), catalyzing the first step of xanthan depolymerization (H. Nankai, W. Hashimoto, H. Miki, S. Kawai, and K. Murata, Appl. Environ. Microbiol. 65:2520–2526, 1999). A gene for the lyase was cloned, and its nucleotide sequence was determined. The gene contained an open reading frame consisting of 2,793 bp coding for a polypeptide with a molecular weight of 99,308. The polypeptide had a signal peptide (2 kDa) consisting of 25 amino acid residues preceding the N-terminal amino acid sequence of the enzyme and exhibited significant homology with hyaluronidase of Streptomyces griseus (identity score, 37.7%). Escherichia coli transformed with the gene without the signal peptide sequence showed a xanthan lyase activity and produced intracellularly a large amount of the enzyme (400 mg/liter of culture) with a molecular mass of 97 kDa. During storage at 4°C, the purified enzyme (97 kDa) from E. coli was converted to a low-molecular-mass (75-kDa) enzyme with properties closely similar to those of the enzyme (75 kDa) from Bacillus sp. strain GL1, specifically in optimum pH and temperature for activity, substrate specificity, and mode of action. Logarithmically growing cells of Bacillus sp. strain GL1 on the medium with xanthan were also found to secrete not only xanthan lyase (75 kDa) but also a 97-kDa protein with the same N-terminal amino acid sequence as that of xanthan lyase (75 kDa). These results suggest that, in Bacillus sp. strain GL1, xanthan lyase is first synthesized as a preproform (99 kDa), secreted as a precursor (97 kDa) by a signal peptide-dependent mechanism, and then processed into a mature form (75 kDa) through excision of a C-terminal protein fragment with a molecular mass of 22 kDa.     

Characterization of a gene cluster from Ralstonia eutropha JMP134 encoding metabolism of 4-methylmuconolactone

A 2,585 bp chromosomal DNA segment of Ralstonia eutropha JMP134 (formerly: Alcaligenes eutrophus JMP134) which contains a gene cluster encoding part of the modified ortho-cleavage pathway encodes a putative transport protein for 4-methylmuconolactone, a novel 4-methylmuconolactone methylisomerase and methylmuconolactone isomerase. The putative 4-methylmuconolactone transporter, a protein with a calculated molecular mass of 45.8 kDa, exhibits sequence homology to other members of the major superfamily of transmembrane facilitators and shows the common structural motif of 12 transmembrane-spanning α-helical segments and the hallmark amino acid motif characteristic of the superfamily. Consistent with the novelty of the reaction catalyzed by 4-methylmuconolactone methylisomerase, no primary sequence homologies were found between this enzyme or its gene and other proteins or genes in the data banks, suggesting that this enzyme represents a new type of isomerase. The molecular mass of the native 4-methylmuconolactone methylisomerase was determined by gel filtration analysis to be 25±2 kDa. From the polynucleotide sequence of the gene, a molecular mass of 12.9 kDa was calculated and hence we predict a homodimeric quaternary structure. The high sensitivity of 4-methylmuconolactone methylisomerase to heavy metals and thiol-modifying reagents implicates the involvement of sulfhydryl groups in the catalytic reaction. The methylmuconolactone isomerase – calculated molecular mass 10.3 kDa – has a primary structure related to the classical muconolactone isomerases (EC 5.3.3.4) of Acinetobacter calcoaceticus, of two Pseudomonas putida strains and of Ralstonia eutropha JMP134, suggesting that these are all isoenzymes. Consistent with this proposal is the finding that the purified protein exhibits muconolactone-isomerizing activity.     

Characterisation of the mcpA and mcpB genes capable of encoding methyl-accepting type chemoreceptors in Rhodobacter capsulatus

Two contiguous mcp genes, mcpA and mcpB, transcribed from the same DNA strand and capable of encoding methyl-accepting chemotaxis proteins (Mcp) have been isolated from Rhodobacter capsulatus (Rc), sequenced and overexpressed in Escherichia coli (Ec). The deduced proteins (McpA, 69 171 Da; McpB, 81 629 Da) show a structure similar to that of Ec Mcp. The products of mcpA and mcpB, overproduced in Ec, were recognized by anti-Ec Mcp (Trg) antibodies     

Nucleotide sequence of the recF gene cluster from Staphylococcus aureus and complementation analysis in Bacillus subtilis recF mutants

We have determined the nucleotide sequence of a 3.5 kb segment in the recF region of the Staphylococcus aureus chromosome. The gene order at this locus, dnaA-dnaN-recF-gyrB is similar to that found in the replication origin region of many other bacteria. S. aureus RecF protein (predicted molecular mass 42.3 kDa), has 57% amino acid sequence identity with the Bacillus subtilis RecF protein (42.2 kDa), but only 26% with the Escherichia coli RecF protein (40.5 kDa). We have shown that the S. aureus recF gene partially complements the defect of a B. subtilis recF mutant, but does not complement an E. coli recF strain. The amino acid sequence alignment of seven available RecF proteins (five of them from bacteria of gram-negative origin) allowed us to identify eight highly conserved regions (α to θ) and to predict five new conserved regions within the gram-positive group (a to f). We suggest that the basic mechanism of homologous recombination is conserved among free-living bacteria.     

Identification of a methyl-accepting chemotaxis protein in Rhodobacter sphaeroides

Analysis of the DNA sequence directly upstream of the chemotaxis operon of Rhodobacter sphaeroides identified a single gene whose product has strong similarity to the methyl-accepting chemotaxis proteins (MCPs) found in enteric bacteria. The deduced protein had a highly conserved signalling sequence and only one very hydrophobic region at the N-terminus, in contrast to enteric MCPs. A possible cytoplasmic location of the majority of the protein was supported by Western blotting. The mcpA gene was insertionally inactivated and the resulting phenotype examined using swarm plate assays. The mutant lacking McpA lost chemotaxis to a wide range of attractant stimuli but only under aerobic conditions; it retained almost normal chemotaxis under anaerobic/photosynthetic conditions. The identification of a sensory protein which is active only under one set of growth conditions suggests that R. sphaeroides probably has several MCPs, which co-ordinately respond to changes in environmental conditions. Southern hybridization at relaxed stringency to the conserved sequence of the R. sphaeroides and Caulobacter crescentus mcp genes identified three possible additional mcp genes.     

Purification, Characterization, and Sequence Analysis of 2-Aminomuconic 6-Semialdehyde Dehydrogenase from Pseudomonas pseudoalcaligenes JS45

2-Aminonumconic 6-semialdehyde is an unstable intermediate in the biodegradation of nitrobenzene and 2-aminophenol by Pseudomonas pseudoalcaligenes JS45. Previous work has shown that enzymes in cell extracts convert 2-aminophenol to 2-aminomuconate in the presence of NAD⁺. In the present work, 2-aminomuconic semialdehyde dehydrogenase was purified and characterized. The purified enzyme migrates as a single band on sodium dodecyl sulfate-polyacrylamide gel electrophoresis with a molecular mass of 57 kDa. The molecular mass of the native enzyme was estimated to be 160 kDa by gel filtration chromatography. The optimal pH for the enzyme activity was 7.3. The enzyme is able to oxidize several aldehyde analogs, including 2-hydroxymuconic semialdehyde, hexaldehyde, and benzaldehyde. The gene encoding 2-aminomuconic semialdehyde dehydrogenase was identified by matching the deduced N-terminal amino acid sequence of the gene with the first 21 amino acids of the purified protein. Multiple sequence alignment of various semialdehyde dehydrogenase protein sequences indicates that 2-aminomuconic 6-semialdehyde dehydrogenase has a high degree of identity with 2-hydroxymuconic 6-semialdehyde dehydrogenases.     

Triphenylmethane Reductase from Citrobacter sp. Strain KCTC 18061P: Purification, Characterization, Gene Cloning, and Overexpression of a Functional Protein in Escherichia coli

We purified to homogeneity an enzyme from Citrobacter sp. strain KCTC 18061P capable of decolorizing triphenylmethane dyes. The native form of the enzyme was identified as a homodimer with a subunit molecular mass of about 31 kDa. It catalyzes the NADH-dependent reduction of triphenylmethane dyes, with remarkable substrate specificity related to dye structure. Maximal enzyme activity occurred at pH 9.0 and 60°C. The enzymatic reaction product of the triphenylmethane dye crystal violet was identified as its leuco form by UV-visible spectral changes and thin-layer chromatography. A gene encoding this enzyme was isolated based on its N-terminal and internal amino acid sequences. The nucleotide sequence of the gene has a single open reading frame encoding 287 amino acids with a predicted molecular mass of 30,954 Da. Although the deduced amino acid sequence displays 99% identity to the hypothetical protein from Listeria monocytogenes strain 4b H7858, it shows no overall functional similarity to any known protein in the public databases. At the N terminus, the amino acid sequence has high homology to sequences of NAD(P)H-dependent enzymes containing the dinucleotide-binding motif GXXGXXG. The enzyme was heterologously expressed in Escherichia coli, and the purified recombinant enzyme showed characteristics similar to those of the native enzyme. This is the first report of a triphenylmethane reductase characterized from any organism.     

Two-domain hemoglobin from the blood clam,Barbatia lima. The cDNA-derived amino acid sequence

The blood clam,Barbatia lima, from Kochi, Japan, expresses a tetrameric (α ₂ β ₂) and a polymeric hemoglobin in erythrocytes. The latter hemoglobin is composed of unusual 34-kDa hemoglobin with a two-domain structure, and its molecular mass (about 430 kDa) is exceptionally large for an intracellular hemoglobin. The 3′ and 5′ parts of the cDNA ofB. lima two-domain globin have been amplified separately by polymerase chain reaction and the complete nucleotide sequence of 1147 bp was determined. The open reading frame is 930 nucleotides in length and encodes a protein with 309 amino acid residues, of which 73 amino acids were identified directly by protein sequencing. The mature protein begins with the acetylated Ser, and thus the N-terminus Met is cleaved. The molecular mass for the protein was calculated to be 35,244 Da. The cDNA-derived amino acid sequence ofB. lima two-domain globin shows 89% homology with that of two-domain globin fromB. reeveana, a North American species. The sequence homology between the two domains is 75%, suggesting that the two-domain globin resulted from the gene duplication of an ancestral 17-kDa globin.     

Cloning,characterization and heterelogous expression of the INU1 gene from Cryptococcus aureus HYA

The INU1 gene (Accession number: JX073660) encoding exo-inulinase from Cryptococcus aureus HYA was cloned and characterized. The gene had an open reading frame (ORF) of 1653 bp long encoding an inulinase. The coding region of the gene was not interrupted by any intron. It encoded 551 amino acid residues of a protein with a putative signal peptide of 23 amino acids and the calculated molecular mass of 59.5 kDa. The protein sequence deduced from the inulinase structural gene contained the inulinase consensus sequences (WMNDPNGL), (RDP), ECP, FS and Q. It also had two conserved putative N-glycosylation sites. The inulinase from C. aureus HYA was found to be closely related to that from Kluyveromyces marxianus and Pichia guilliermondii. The inulinase gene without the signal sequence was subcloned into pPICZaA expression vector and expressed in Pichia pastoris X-33. The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 60 kDa was found. Enzyme activity assay verified the recombinant protein as an inulinase. A maximum inulinase activity of 16.3 ± 0.24 U/ml was obtained from the culture supernatant of P. pastoris X-33 harboring the inulinase gene. The optimal temperature and pH for action of the enzyme were 50 °C and 5.0, respectively. A large amount of monosaccharides were detected after the hydrolysis of inulin with the purified recombinant inulinase.     

P45, an extracellular 45 kDa protein of Listeria monocytogenes with similarity to protein p60 and exhibiting peptidoglycan lytic activity

A monoclonal antibody obtained by immunization of mice with heat-killed cells of Listeria monocytogenes serotype 4d showed reactivity towards a protein (P45) from L. monocytogenes with an apparent molecular mass of 45 kDa. This protein was detected in the culture supernatant and at the cell surface of L. monocytogenes. Proteins cross-reacting with the monoclonal antibody were present in all Listeria strains investigated, except L. grayi. The structural gene was cloned in Escherichia coli and sequenced. Translation of the gene starts at a TTG initiation codon. The gene was found to code for a protein of 402 amino acid residues with a predicted molecular mass of 42.7 kDa. It has a signal peptide of 27 amino acid residues, resulting in a molecular mass for the mature polypeptide of 39.9 kDa. Protein database searches showed that this protein has 55% similarity and 38% identity to protein p60 of L. monocytogenes and exhibits significant sequence similarities to p54 from Enterococcus faecium and Usp45 from Lactococcus lactis. P45 was shown to have peptidoglycan lytic activity and the encoding gene was named spl (secreted protein with lytic property). Revision received: 11 August 1999 / Accepted: 8 September 1999     

Cloning and characterization of oah, the gene encoding oxaloacetate hydrolase in Aspergillus niger

The enzyme oxaloacetate hydrolase (EC 3.7.1.1), which is involved in oxalate formation, was purified from Aspergillus niger. The native enzyme has a molecular mass of 360–440 kDa, and the denatured enzyme has a molecular mass of 39 kDa, as determined by gel electrophoresis. Enzyme activity is maximal at pH 7.0 and 45 °C. The fraction containing the enzyme activity contained at least five proteins. The N-terminal amino acid sequences of four of these proteins were determined. The amino acid sequences were aligned with EST sequences from A. niger, and an EST sequence that showed 100% identity to all four sequences was identified. Using this EST sequence the gene encoding oxaloacetate hydrolase (oah) was cloned by inverse PCR. It consists of an ORF of 1227 bp with two introns of 92 and 112 bp, respectively. The gene encodes a protein of 341 amino acids with a molecular mass of 37 kDa. Under the growth conditions tested, the highest oah expression was found for growth on acetate as carbon source. The gene was expressed only at pH values higher than 4.0. Received: 9 May 1999 / Accepted: 30 November 1999     

aguA, the Gene Encoding an Extracellular α-Glucuronidase from Aspergillus tubingensis, Is Specifically Induced on Xylose and Not on Glucuronic Acid

An extracellular α-glucuronidase was purified and characterized from a commercial Aspergillus preparation and from culture filtrate of Aspergillus tubingensis. The enzyme has a molecular mass of 107 kDa as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and 112 kDa as determined by mass spectrometry, has a determined pI just below 5.2, and is stable at pH 6.0 for prolonged times. The pH optimum for the enzyme is between 4.5 and 6.0, and the temperature optimum is 70°C. The α-glucuronidase is active mainly on small substituted xylo-oligomers but is also able to release a small amount of 4-O-methylglucuronic acid from birchwood xylan. The enzyme acts synergistically with endoxylanases and β-xylosidase in the hydrolysis of xylan. The enzyme is N glycosylated and contains 14 putative N-glycosylation sites. The gene encoding this α-glucuronidase (aguA) was cloned from A. tubingensis. It consists of an open reading frame of 2,523 bp and contains no introns. The gene codes for a protein of 841 amino acids, containing a eukaryotic signal sequence of 20 amino acids. The mature protein has a predicted molecular mass of 91,790 Da and a calculated pI of 5.13. Multiple copies of the gene were introduced in A. tubingensis, and expression was studied in a highly overproducing transformant. The aguA gene was expressed on xylose, xylobiose, and xylan, similarly to genes encoding endoxylanases, suggesting a coordinate regulation of expression of xylanases and α-glucuronidase. Glucuronic acid did not induce the expression of aguA and also did not modulate the expression on xylose. Addition of glucose prevented expression of aguA on xylan but only reduced the expression on xylose.     

Identification of a cuticle protein with unique repeated motifs in the silkworm,Bombyx mori

The insect cuticle is non-cellular matrix secreted from a monolayer of epidermal cells. After abrasion of the larval cuticle of the silkworm, Bombyx mori, a protein with molecular mass of 135 kDa is newly detected in the cuticle. Mass spectrometric analysis of the tryptic fragments from this protein revealed that the 135-kDa protein is encoded by the Cb10 gene. In the predicted amino acid sequence of Cb10, three repeated motifs with [YxGGFGGppG(L/V)L] sequence are found in the C-terminal region. In addition to the repeated motifs, Cb10 has seventeen CxxxxC motifs randomly distributed throughout the polypeptide chain and serine rich region at the N-terminal region. The Cb10 gene is strongly expressed in epidermal cells after pupal ecdysis, and its expression in the larval epidermal cells is induced not only by cuticular abrasion, but also by bacterial infection. These expression patterns suggest some specific roles of this protein in pupal cuticle formation and defense reactions.     

Cloning and sequencing of ribosomal protein L27a and a gene similar to human GS1 in Drosophila

Two closely linked genes were identified and characterized in the 24F region on the left arm of chromosome 2 in Drosophila. One cDNA predicts a protein of 231 amino acids, with a molecular mass of 25.7 kDa. The predicted amino-acid sequence of this protein is 47.2% identical to that of the previously reported human GS1 protein, which is encoded by a gene that is of interest because it is one of the few X-linked genes that escapes X-inactivation. We have accordingly named our gene GS1like (GS1l). The second cDNA begins 383 bp proximal to the first. This cDNA encodes a protein of a predicted 149 amino acids and a molecular mass of 17.0 kDa. This protein represents a homolog of ribosomal protein L27a; thus, we have named the gene RpL27a. This gene might be responsible for the Minute mutation located at 24F. An rpL27a gene was previously localized to 87F/88A; thus, this gene might be present in two locations in Drosophila.     

Nucleotide sequence of the gene encoding cis-biphenyl dihydrodiol dehydrogenase (bphB) and the expression of an active recombinant His-tagged bphB gene product from a PCB degrading bacterium, Pseudomonas putida OU83

The nucleotide sequence of the bphB gene of Pseudomonas putida strain OU83 was determined. The bphB gene, which encodes cis-biphenyl dihydrodiol dehydrogenase (BDDH), was composed of 834 base pairs with an ATG initiation codon and a TGA termination codon. It can encode a polypeptide of 28.91 kDa, containing 277 amino acids. Promoter-like and ribosome-binding sequences were identified upstream of the bphB gene. The bphB nucleotide sequence was used to produce His-tagged BDDH, in Escherichia coli. The His-tagged BDDH construction, carrying a single 6×His tail on the N-terminal portion, was active. The molecular mass of the native enzyme was 128 kDa and on SDS-PAGE analysis the molecular mass was 31 kDa. This enzyme requires NAD⁺ for its activity and its optimum pH is 8.5. Nucleotide and the deduced amino acid sequence analyses revealed a high degree of homology between the bphB gene from Pseudomonas putida OU83 and the bphB genes from P. cepacia LB400 and P. pseudoalcaligenes KF707.     

Cloning, Sequencing, and Characterization of a Heat- and Alkali-Stable Type I Pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70°C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg′). The N-terminal sequence of purified rPulAg′ was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg′ were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, β-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg′ was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

Physical and genetic characterization of an outer-membrane protein (OmpM1) containing an N-terminal S-layer-like homology domain from the phylogenetically Gram-positive gut anaerobe Mitsuokella multacida

Thin sectioning and freeze-fracture-etch of the ovine ruminal isolate Mitsuokella multacida strain 46/5(2) revealed a Gram-negative envelope ultra-structure consisting of a peptidoglycan wall overlaid by an outer membrane. Sodium-dodecyl-sulfate-polyacrylamide gel electrophoretic (SDS-PAGE) analysis of whole cells, cell envelopes and Triton X-100 extracted envelopes in combination with thin-section and N-terminal sequence analyses demonstrated that the outer membrane contained two major proteins (45 and 43 kDa) sharing identical N-termini (A-A-N-P-F-S-D-V-P-A-D-H-W-A-Y-D). A gene encoding a protein with a predicted N-terminus identical to those of the 43 and 45 kDa outer-membrane proteins was cloned. The 1290 bp open reading frame encoded a 430 amino acid polypeptide with a predicted molecular mass of 47,492 Da. Cleavage of a predicted 23 amino acid leader sequence would yield a protein with a molecular mass of 45,232 Da. Mass spectroscopic analysis confirmed that the cloned gene (ompM1) encoded the 45 kDa outer-membrane protein. The N-terminus of the mature OmpM1 protein (residues 24–70) shared homology with surface-layer homology (SLH) domains found in a wide variety of regularly structured surface-layers (S-layers). However, the outer-membrane locale, resistance to denaturation by SDS and high temperatures and the finding that the C-terminal residue was a phenylalanine suggested that ompM1 encoded a porin. Threading analysis in combination with the identification of membrane spanning domains indicated that the C-terminal region of OmpM1 (residues 250–430) likely forms a 16-strand β-barrel and appears to be related to the unusual N-terminal SLH-domain-containing β-barrel-porins previously described in the cyanobacterium Synechococcus PCC6301.