Analysis of kinetics using a hybrid maximum-entropy/nonlinear-least-squares method: application to protein folding

A hybrid analysis that combines the maximum entropy method (MEM) with nonlinear least squares (NLS) fitting has been developed to interpret a general time-dependent signal. Data that include processes of opposite sign and a slow baseline drift can be inverted to obtain both a continuous distribution of lifetimes and a sum of discrete exponentials. Fits by discrete exponentials are performed with initial parameters determined from the distribution of lifetimes obtained with the MEM. The regularization of the parameter space achieved by the MEM stabilizes the introduction of each successive exponential in the NLS fits. This hybrid approach is particularly useful when fitting by a large number of exponentials. Revision of the MEM "prior" based on features in the data can improve the lifetime distribution obtained. Standard errors in the mean are estimated automatically for raw data. The results presented for simulated data and for fluorescence measurements of protein folding illustrate the utility and accuracy of the hybrid algorithm. Analysis of the folding of dihydrofolate reductase reveals six kinetic processes, one more than previously reported.     

Direct-injection HPLC method of measuring micafungin in human plasma using a novel hydrophobic/hydrophilic hybrid ODS column

A direct-injection HPLC-based method has been developed for determining amounts of micafungin in human plasma using a novel hydrophobic/hydrophilic hybrid ODS column. The method is easy to perform and requires only 10 μL of a filtered plasma sample. The chromatographic separations were carried out with a gradient mode. The fluorescence detection wavelengths of excitation and emission were set at 273 nm and 464 nm, respectively. Retention times for micafungin and IS were 22.4 and 23.7 min, respectively. Micafungin and FR195743 (IS) peaks were completely separated with little tailing, and no interference was observed. The calibration curve of micafungin showed good linearity in the range of 0.5-20.0 μg/mL (r(2)=1.00). The intra-day accuracy ranged from -4.5 to 5.3%. The inter-day accuracy ranged from -9.8 to 1.5%. The precisions were less than 10%. This method is useful for the determination of micafungin in human plasma.     

Detection of Vibrio parahaemolyticus in food samples using in situ loop-mediated isothermal amplification method

A novel in situ loop-mediated isothermal amplification (in situ LAMP) technique for rapid detection of the food-borne Vibrio parahaemolyticus strains had been developed and evaluated in this study. The sensitivity of the in situ LAMP assay was detected to be 10 CFU/reaction via test in serial 10-fold dilutions of V. parahaemolyticus cells, and high specificity had also been obtained through confirmation with 14 reference gram-positive and -negative strains. Application of the established in situ LAMP assay had been performed on 58 strains previously isolated from seafood samples, including 48 V. parahaemolyticus and 10 non-V. parahaemolyticus strains. Of 48 V. parahaemolyticus strains, 48, 45 and 34 strains were detected as positive by in situ LAMP, regular LAMP and PCR, respectively, with the detection rate and negative predictive value (NPV) found to be 100% vs 93.8% vs 70.8% and 100% vs 76.9% vs 41.7%. In addition, none of the tested non-V. parahaemolyticus strains showed positive result, indicating a 100% positive predictive value (PPV) for all of 3 assays. Compared with regular LAMP methods and PCR-based methods, the in situ LAMP assay is advantageous on rapidity, high specificity, less time consumption and ease in operation, and may provide a novel, useful and practical detection platform for pathogens in food safety laboratories.     

Development of a fluorescence in situ hybridization method for cheese using a 16S rRNA probe

A 16S rRNA fluorescence in situ hybridization (FISH) method for cheese was developed to allow detection in situ of microorganisms within the dairy matrix. An embedding procedure using a plastic resin was applied to Stilton cheese, providing intact embedded cheese sections withstanding the hybridization reaction. The use of a fluorescein-labelled 16S rRNA Domain Bacteria probe allowed observation of large colonies of microbial cells homogeneously distributed in the cheese matrix. FISH experiments performed on cheese suspensions provided images of the different microbial morphotypes occurring. The technique has great potential to study the spatial distribution of microbial populations in situ in foods, especially where the matrix is too fragile to allow manipulation of cryosections.     

Finite elements/Taguchi method based procedure for the identification of the geometrical parameters significantly affecting the biomechanical behavior of a lumbar disc

The aim of this work is to show a quick and simple procedure able to identify the geometrical parameters of the intervertebral disc that strongly affect the behavior of the FEM model. First, we allocated a selection criterion for the minimum number of geometrical parameters that describe, with a good degree of approximation, a healthy human vertebra. Next, we carried out a sensitivity analysis using the ‘Taguchi orthogonal array’ to arrive at a quick identification of the parameters that strongly affect the behavior of the Fem model.     

Locating hybrid individuals in the red wolf (Canis rufus) experimental population area using a spatially targeted sampling strategy and faecal DNA genotyping

Hybridization with coyotes (Canis latrans) continues to threaten the recovery of endangered red wolves (Canis rufus) in North Carolina and requires the development of new strategies to detect and remove coyotes and hybrids. Here, we combine a spatially targeted faecal collection strategy with a previously published reference genotype data filtering method and a genetic test for coyote ancestry to screen portions of the red wolf experimental population area for the presence of nonred wolf canids. We also test the accuracy of our maximum-likelihood assignment test for identifying hybrid individuals using eight microsatellite loci instead of the original 18 loci and compare its performance to the Bayesian approach implemented in newhybrids. We obtained faecal DNA genotypes for 89 samples, 73 of which were matched to 23 known individuals. The performance of two sampling strategies - comprehensive sweep and opportunistic spot-check was evaluated. The opportunistic spot-check sampling strategy required less effort than the comprehensive sweep sampling strategy but identified fewer individuals. Six hybrids or coyotes were detected and five of these individuals were subsequently captured and removed from the population. The accuracy and power of the genetic test for coyote ancestry is decreased when using eight loci; however, nonred wolf canids are identified with high frequency. This combination of molecular and traditional field-based approaches has great potential for addressing the challenge of hybridization in other species and ecosystems.     

Large improvements in MS/MS-based peptide identification rates using a hybrid analysis

We report a hybrid search method combining database and spectral library searches that allows for a straightforward approach to characterizing the error rates from the combined data. Using these methods, we demonstrate significantly increased sensitivity and specificity in matching peptides to tandem mass spectra. The hybrid search method increased the number of spectra that can be assigned to a peptide in a global proteomics study by 57-147% at an estimated false discovery rate of 5%, with clear room for even greater improvements. The approach combines the general utility of using consensus model spectra typical of database search methods with the accuracy of the intensity information contained in spectral libraries. A common scoring metric based on recent developments linking data analysis and statistical thermodynamics is used, which allows the use of a conservative estimate of error rates for the combined data. We applied this approach to proteomics analysis of Synechococcus sp. PCC 7002, a cyanobacterium that is a model organism for studies of photosynthetic carbon fixation and biofuels development. The increased specificity and sensitivity of this approach allowed us to identify many more peptides involved in the processes important for photoautotrophic growth.     

A simplified method to determine binding parameters in a two-site case using linear regression

A program using a simplified method to compute estimates of binding parameters in a system with two independent classes of binding sites is presented. An iterative method is used to approximate step-by-step the two lines describing the binding activities separately, starting from a curvilinear Scatchard or Hofstee plot. This method is designed for use on microcomputers with graphic facilities and on programmable hand-held calculators.     

Nitroreductase-mediated cell/tissue ablation in zebrafish: a spatially and temporally controlled ablation method with applications in developmental and regeneration studies

Ablation studies are used to elucidate cell lineage relationships, developmental roles for specific cells during embryogenesis and mechanisms of tissue regeneration. Previous chemical and genetic approaches to directed cell ablation have been hampered by poor specificity, limited efficacy, irreversibility, hypersensitivity to promoter leakiness, restriction to proliferating cells, slow inducibility or complex genetics. Here, we provide a step-by-step protocol for a hybrid chemical-genetic cell ablation method in zebrafish that, by combining spatial and temporal control, is cell-type specific, inducible, reversible, rapid and scaleable. Bacterial Nitroreductase (NTR) is used to catalyze the reduction of the innocuous prodrug metrodinazole (Mtz), thereby producing a cytotoxic product that induces cell death. Based on this principle, NTR is expressed in transgenic zebrafish using a tissue-specific promoter. Subsequent exposure to Mtz by adding it to the media induces cell death exclusively within NTR(+) cells. This approach can be applied to regeneration studies, as removing Mtz by washing permits tissue recovery. Using this protocol, cell ablation can be achieved in 12-72 h, depending on the transgenic line used, and recovery initiates within the following 24 h.     

An in situ method for determining bacterial survival on food preparation surfaces using a redox dye

A simple method is described for the direct enumeration of viable bacteria dried on test surfaces. Inoculated surfaces were overlayed with agar and after incubation nitroblue tetrazolium solution (pale yellow) was used to stain colonies (purple) at the agar-test surface interface. Stained colonies could be readily detected and counted even against the opaque background of ceramic tile or stainless steel or when present within opaque films of milk or serum. Recovery of bacteria by this method was approximately fivefold greater than using a conventional swabbing procedure. The method was used to demonstrate the marked effect of the composition of the suspension fluid, in which bacteria were dried, and the length of surface exposure upon bacterial survival.     

Development of a genomic in situ hybridization method using Technovit 7100 sections of early wheat embryo

It is difficult to observe the behavior of chromosomes in early wheat embryos because they are wrapped in several cell layers of the ovary. Here we conducted genomic in situ hybridization on sections of ovary embedded in Technovit 7100, a resinous compound suitable for in situ hybridization of mRNA in sectioned tissues. With this resin it is possible to make thin sections with high resolution, no autofluorescence, and good water permeability. These features enable histochemical study using fluorescence microscopy. We established the most suitable conditions for the denaturation of target DNA embedded in Technovit resin, and performed GISH on them. Using this method, we identified Leymus mollis chromosomes in the young ovary of F₁ hybrids between wheat and L. mollis. Furthermore, we observed the behavior of maize chromosomes in early wheat × maize hybrid embryos.     

Development of a genomic in situ hybridization method using Technovit 7100 sections of early wheat embryo

It is difficult to observe the behavior of chromosomes in early wheat embryos because they are wrapped in several cell layers of the ovary. Here we conducted genomic in situ hybridization on sections of ovary embedded in Technovit 7100, a resinous compound suitable for in situ hybridization of mRNA in sectioned tissues. With this resin it is possible to make thin sections with high resolution, no autofluorescence, and good water permeability. These features enable histochemical study using fluorescence microscopy. We established the most suitable conditions for the denaturation of target DNA embedded in Technovit resin, and performed GISH on them. Using this method, we identified Leymus mollis chromosomes in the young ovary of F₁ hybrids between wheat and L. mollis. Furthermore, we observed the behavior of maize chromosomes in early wheat × maize hybrid embryos.     

Physical localization of chromosome 20 markers using somatic cell hybrid cell lines and fluorescence in situ hybridization.

A panel of somatic cell hybrid cell lines containing different parts of human chromosome 20 and fluorescence in situ hybridization have been used to physically localize markers to human chromosome 20. Through these complementary approaches and genetic linkage analysis, D20S16, which is closely linked to the maturity onset diabetes of the young (MODY) locus, was mapped to band 20q12 --> q13.1. The gene for growth hormone-releasing factor (GHRF) was physically mapped and reassigned to 20q11, suggesting that GHRF plays no direct role in MODY. In addition, the genes for the chromosome 20-linked glycogen phosphorylase (GYPB) and the bone morphogenetic protein (BMP2A) have been assigned to chromosome 20p, and the interleukin-6-dependent DNA-binding protein (TCF5) has been assigned to 20q12 --> q13 by hybridization to genomic DNA from the panel of somatic cell hybrid cell lines. These approaches are useful for rapid localization of candidate genes for MODY and other DNA markers mapped to chromosome 20.     

Development of a rapid method for detecting bacterial cells in situ using 16S rRNA-targeted probes.

A rapid method for the identification of bacterial cells using 16S rRNA-directed, fluorescently tagged oligonucleotide probes has been developed. The parameters evaluated for their effect on labeling intensity included storage time, type of fixative, time of fixation, treatment time with methanol:formaldehyde and treatment time with borohydride. The results of tests using a variety of microorganisms, both Gram-positive and Gram-negative, are presented. Using this method, cells are spotted onto slides and stored desiccated until hybridized. This method may be especially applicable to environmental samples, which comprise diverse cell types and frequently require storage prior to examination.     

Development of a genomic in situ hybridization method using Technovit 7100 sections of early wheat embryo.

It is difficult to observe the behavior of chromosomes in early wheat embryos because they are wrapped in several cell layers of the ovary. Here we conducted genomic in situ hybridization on sections of ovary embedded in Technovit 7100, a resinous compound suitable for in situ hybridization of mRNA in sectioned tissues. With this resin it is possible to make thin sections with high resolution, no autofluorescence, and good water permeability. These features enable histochemical study using fluorescence microscopy. We established the most suitable conditions for the denaturation of target DNA embedded in Technovit resin, and performed GISH on them. Using this method, we identified Leymus mollis chromosomes in the young ovary of F1 hybrids between wheat and L. mollis. Furthermore, we observed the behavior of maize chromosomes in early wheat x maize hybrid embryos.     

Genomic in situ hybridization analysis of a trigenomic hybrid involving Solanum and Lycopersicon species.

A 4x potato (+) tomato fusion hybrid (2n = 4x = 48) was successfully backcrossed with a diploid Lycopersicon pennellii (2n = 2x = 24). Genomic in situ hybridization (GISH) on somatic and meiotic chromosomes confirmed that the progenies were triploids (2n = 3x = 36) and possessed three different genomes: potato, tomato, and L. pennellii. Therefore, they have been called trigenomic hybrids. Total genomic probes of both Lycopersicon species were found to hybridize mutually, whereas the potato genome was clearly differentiated. During metaphase I, bivalents were formed predominantly between tomato and L. pennellii chromosomes and the univalents of potato chromosomes were most common. Trivalents in all cases included homoeologous chromosomes of potato, tomato, and L. pennellii. However, the triploids were totally sterile as determined from extensive crossing. On chromosome doubling of triploids by shoot regeneration from callus, hexaploids (2n = 6x = 72) were obtained. Despite exhibiting clear allohexaploid behaviour by forming 36 bivalents at meiosis, these were also completely sterile like their triploid counterparts. In spite of this drawback, the prospects of chromosome pairing between potato L. pennellii and Solanum genomes does open the possibilities for bringing the two genera close.     

Mitochondrial respiratory parameters in cardiac tissue: a novel method of assessment by using saponin-skinned fibers

Respiratory parameters of cardiac mitochondria were determined in the bundles of cardiac fibers skinned by using saponin that specifically removed sarcolemma, but left intracellular structures intact. In the assay medium which simulated the ion composition of cardiac cytoplasm maximal value of state 3 oxygen consumption per mol cytochromes aa3 was close to that value for isolated mitochondria. Ischemia and isopreterenol treatment were found to affect respiratory parameters of mitochondria in saponin-skinned fibers, among them creatine-stimulated respiration decreased most significantly, (3-4)-times under these conditions. The method described can be easily applied for determination of the mitochondrial respiratory parameters in small (5-10 mg) biopsy samples from human heart.