Uncovering Atomic‐Scale Stability and Reactivity in Engineered Zinc Oxide Electrocatalysts for Controllable Syngas Production

In this study, scalable, flame spray synthesis is utilized to develop defective ZnO nanomaterials for the concurrent generation of H₂ and CO during electrochemical CO₂ reduction reactions (CO₂RR). The designed ZnO achieves an H₂/CO ratio of ≈1 with a large current density (j) of 40 mA cm^?2 during long‐term continuous reaction at a cell voltage of 2.6 V. Through in situ atomic pair distribution function analysis, the remarkable stability of these ZnO structures is explored, addressing the knowledge gap in understanding the dynamics of oxide catalysts during CO₂RR. Through optimization of synthesis conditions, ZnO facets are modulated which are shown to affect reaction selectivity, in agreement with theoretical calculations. These findings and insights on synthetic manipulation of active sites in defective metal‐oxides can be used as guidelines to develop active catalysts for syngas production for renewable power‐to‐X to generate a range of fuels and chemicals.     

In-Situ Constructuring of Copper-Doped Bismuth Catalyst for Highly Efficient CO2 Electrolysis to Formate in Ampere-Level

CO₂ electrochemical reduction (CO₂RR) can mitigate environmental issues while providing valuable products, yet challenging in activity, selectivity, and stability. Here, a CuS-Bi₂S₃ heterojunction precursor is reported that can in situ reconstruct to Cu-doped Bismuth (CDB) electrocatalyst during CO₂RR. The CDB exhibits an industrial-compatible current density of −1.1 A cm⁻² and a record-high formate formation rate of 21.0 mmol h⁻¹ cm⁻² at −0.86 V versus the reversible hydrogen electrode toward CO₂RR to formate, dramatically outperforming currently reported catalysts. Importantly, the ultrawide potential region of 1050 mV with high formate Faradaic efficiency of over 90% and superior long-term stability for more than 100 h at −400 mA cm⁻² can also be realized. Experimental and theoretical studies reveal that the remarkable CO₂RR performance of CDB results from the doping effect of Cu which optimizes adsorption of the *OCHO and boosts the structural stability of metallic bismuth catalyst. This study provides valuable inspiration for the design of element-doping electrocatalysts to enhance catalytic activity and durability.     

Perovskite Oxyfluoride Electrode Enabling Direct Electrolyzing Carbon Dioxide with Excellent Electrochemical Performances

Solid oxide electrolysis cells (SOECs) can efficiently convert the greenhouse‐gas CO₂ to valuable fuel CO at the cathodes. Herein, fluorine is doped into mixed ionic–electronic conducting Sr₂Fe_1.5Mo_0.5O_6‐δ (SFM), to evaluate its potential use as a cathode for CO₂ reduction reaction (CO₂‐RR). SFM retains its cubic structure after doped with fluorine, forming perovskite oxyfluoride Sr₂Fe_1.5Mo_0.5O_6‐δF_0.1 (F‐SFM). The substitution of oxygen by fluorine increases CO₂ adsorption by a factor of ≈2, bulk oxygen vacancy concentration by 35–37% at 800 °C, and consequently enhances the surface reaction rate constant for CO₂‐RR and chemical bulk diffusion coefficient by factors of 2–3. The faster kinetics are also reflected by a lower polarization resistance of 0.656 Ω cm² for F‐SFM than 1.130 Ω cm² for SFM at 800 °C in symmetrical cells. Furthermore, the single cell with F‐SFM cathode exhibits the best CO₂ electrolysis performance among the reported perovskite electrodes, achieving current density of 1.36 A cm^?2 at 1.5 V and excellent stability over 120 h at 800 °C under harsh conditions. The theoretical computations confirm that fluorine doping is energetically favorable to CO₂ adsorption and dissociation. The present work provides a promising strategy for the design of robust cathodes for direct CO₂ electrolysis in SOECs.     

Electrocatalytic Reduction of Gaseous CO2 to CO on Sn/Cu‐Nanofiber‐Based Gas Diffusion Electrodes

Earth‐abundant Sn/Cu catalysts are highly selective for the electrocatalytic reduction of CO₂ to CO in aqueous electrolytes. However, CO₂ mass transport limitations, resulting from the low solubility of CO₂ in water, so far limit the CO partial current density for Sn/Cu catalysts to about 10 mA cm^?2. Here, a freestanding gas diffusion electrode design based on Sn‐decorated Cu‐coated electrospun polyvinylidene fluoride nanofibers is demonstrated. The use of gaseous CO₂ as a feedstock alleviates mass transport limitations, resulting in high CO partial current densities above 100 mA cm^?2, while maintaining high CO faradaic efficiencies above 80%. These results represent an important step toward an economically viable pathway to CO₂ reduction.     

Edge‐Exposed Molybdenum Disulfide with N‐Doped Carbon Hybridization: A Hierarchical Hollow Electrocatalyst for Carbon Dioxide Reduction

Electrochemical CO₂ reduction (CO₂RR) is a promising technology to produce value‐added fuels and weaken the greenhouse effect. Plenty of efforts are devoted to exploring high‐efficiency electrocatalysts to tackle the issues that show poor intrinsic activity, low selectivity for target products, and short‐lived durability. Herein, density functional theory calculations are firstly utilized to demonstrate guidelines for design principles of electrocatalyst, maximum exposure of catalytic active sites for MoS₂ edges, and electron transfer from N‐doped carbon (NC) to MoS₂ edges. Based on the guidelines, a hierarchical hollow electrocatalyst comprised of edge‐exposed 2H MoS₂ hybridized with NC for CO₂RR is constructed. In situ atomic‐scale observation for catalyst growth is performed by using a specialized Si/SiN_x nanochip at a continuous temperature‐rise period, which reveals the growth mechanism. Abundant exposed edges of MoS₂ provide a large quantity of active centers, which leads to a low onset potential of ≈40 mV and a remarkable CO production rate of 34.31 mA cm^?2 with 92.68% of Faradaic efficiency at an overpotential of 590 mV. The long‐term stability shows negligible degradation for more than 24 h. This work provides fascinating insights into the construction of catalysts for efficient CO₂RR.     

Atomic‐Scale Spacing between Copper Facets for the Electrochemical Reduction of Carbon Dioxide

Copper (Cu) offers a means for producing value‐added fuels through the electrochemical reduction of carbon dioxide (CO₂), i.e., the CO₂ reduction reaction (CO₂RR), but designing Cu catalysts with significant Faradaic efficiency to C₂₊ products remains as a great challenge. This work demonstrates that the high activity and selectivity of Cu to C₂₊ products can be achieved by atomic‐scale spacings between two facets of Cu particles. These spacings are created by lithiating CuO_x particles, removing lithium oxides formed, and electrochemically reducing CuO_x to metallic Cu. Also, the range of spacing (d_s) is confirmed via the 3D tomographs using the Cs‐corrected scanning transmission electron microscopy (3D tomo‐STEM), and the operando X‐ray absorption spectra show that oxidized Cu reduces to the metallic state during the CO₂RR. Moreover, control of d_s to 5–6 Å allows a current density exceeding that of unmodified CuO_x nanoparticles by about 12 folds and a Faradaic efficiency of ≈80% to C₂₊. Density functional theory calculations support that d_s of 5–6 Å maximizes the binding energies of CO₂ reduction intermediates and promotes C–C coupling reactions. Consequently, this study suggests that control of d_s can be used to realize the high activity and C₂₊ product selectivity for the CO₂RR.     

CeNCl-CeO2 Heterojunction-Modified Ni Catalysts for Efficient Electroreduction of CO2 to CO

Renewable-electricity-powered electrochemical CO₂ reduction (CO₂RR) is considered one of the most promising ways to convert exhaust CO₂ into value-added chemicals and fuels. Among various CO₂RR products, CO is of great significance since it can be directly used as feedstock to produce chemical products through the Fischer–Tropsch process. However, the CO₂-to-CO electrocatalytic process is often accompanied by a kinetically competing side reaction: H₂ evolution reaction (HER). Designing electrocatalysts with tunable electronic structures is an attractive strategy to enhance CO selectivity. In this work, a CeNCl-CeO₂ heterojunction-modified Ni catalyst is successfully synthesized with high CO₂RR catalytic performance by the impregnation-calcination method. Benefiting from the strong electron interaction between the CeNCl-CeO₂ heterojunction and Ni nanoparticles (NPs), the catalytic performance is greatly improved. Maximal CO Faradaic efficiency (FE) is up to 90% at −0.8 V (vs RHE), plus good stability close to 12 h. Detailed electrochemical tests and density functional theory (DFT) calculation results reveal that the introduction of the CeNCl-CeO₂ heterojunction tunes the electronic structure of Ni NPs. The positively charged Ni center leads to an enhanced local electronic structure, thus promoting the activation of CO₂ and the adsorption of ^*COOH.     

Ni–Fe–La(Sr)Fe(Mn)O3 as a New Active Cermet Cathode for Intermediate‐Temperature CO2 Electrolysis Using a LaGaO3‐Based Electrolyte

Various additives to Ni–Fe systems are studied as cermet cathodes for CO₂ electrolysis (973–1173 K) using a La_0.9Sr_0.1Ga_0.8Mg_0.2O₃ (LSGM) electrolyte, which is one of the most promising oxide‐ion conductors for intermediate‐temperature solid‐oxide electrolysis cells in terms of ionic‐transport number and conductivity. It is found that Ni–Fe–La_0.6Sr_0.4Fe_0.8Mn_0.2O₃ (Ni–Fe–LSFM) exhibits a remarkable performance with a current density of 2.32 A cm^?2 at 1.6 V and 1073 K. The cathodic overpotential is significantly decreased by mixing the LSFM powder with Ni–Fe, which is related to the increase in the number of reaction sites for CO₂ reduction. For Ni–Fe–LSFM, much smaller particles (<200 nm) are sustained under CO₂ electrolysis conditions at high temperatures than for Ni–Fe. X‐ray diffraction analysis suggests that the main phases of Ni–Fe–LSFM are Ni and LaFeO₃; thus, the oxide phase of LaFeO₃ is also maintained during CO₂ electrolysis. Analysis of the gaseous products indicates that only CO is formed, and the rate of CO formation agrees well with that of a four‐electron reduction process, suggesting that the reduction of CO₂ to CO proceeds selectively. It is also confirmed that almost no coke is deposited on the Ni–Fe–LSFM cathode after CO₂ electrolysis.     

Nanoporous Au Thin Films on Si Photoelectrodes for Selective and Efficient Photoelectrochemical CO2 Reduction

An Si photoelectrode with a nanoporous Au thin film for highly selective and efficient photoelectrochemical (PEC) CO₂ reduction reaction (CO₂RR) is presented. The nanoporous Au thin film is formed by electrochemical reduction of an anodized Au thin film. The electrochemical treatments of the Au thin film critically improve CO₂ reduction catalytic activity of Au catalysts and exhibit CO Faradaic efficiency of 96% at 480 mV of overpotential. To apply the electrochemical pretreatment of Au films for PEC CO₂RR, a new Si photoelectrode design with mesh‐type co‐catalysts independently wired at the front and the back of the photoelectrode is demonstrated. Due to the superior CO₂RR activity of the nanoporous Au mesh and high photovoltage from Si, the Si photoelectrode with the nanoporous Au thin film mesh shows conversion of CO₂ to CO with 91% Faradaic efficiency at positive potential than the CO₂/CO equilibrium potential.     

Bioprocess strategies for enhancing biomolecules productivity in Chlorella fusca LEB 111 using CO2 a carbon source

The aim of this study was to evaluate the influence of different carbon dioxide (CO₂) concentrations on the distribution of carbon forms in the culture medium and the biomass production and biomolecules productivity of the strain Chlorella fusca LEB 111. In this study, experiments were carried out in which C. fusca cultures were exposed to different CO₂ concentrations, 0.03% (0.08 ml_CO2 ml_medium⁻¹ days⁻¹), 5% (0.18 ml_CO2 ml_medium⁻¹ days⁻¹), and 15% vol/vol CO₂ (0.54 ml_CO2 ml_medium⁻¹ days⁻¹). Among the carbon chemical species distributions in the culture medium, bicarbonate was predominant (94.2–98.9%), with the highest quantitative percentage in the experiment receiving a 15% CO₂ injection. C. fusca LEB 111 cultivated with 15% CO₂ showed the highest biomass productivity (194.3 mg L⁻¹ days⁻¹) and CO₂ fixation rate (390.9 mg L⁻¹ days⁻¹). The carbohydrate productivity in the culture that received 15% CO₂ was 46.2% higher than the value verified for the culture with the addition of CO₂ from the air (0.03% CO₂). In addition, CO₂ concentration providing increases of 0.03–15% to C. fusca cultures resulted in a 31.6% increase in the lipid productivity. These results showed that C. fusca can be used for CO₂ bioconversion and for producing biomass with potential applications for biofuels and bioproducts.     

Fast Charge-Transfer Rates in Li-CO2 Batteries with a Coupled Cation-Electron Transfer Process

Li-CO₂ batteries with a high theoretical energy density (1876 Wh kg⁻¹) have unique benefits for reversible carbon fixation for energy storage systems. However, due to lack of stable and highly active catalysts, the long-term operation of Li-CO₂ batteries is limited to low current densities (mainly <0.2 mA cm⁻²) that are far from practical conditions. In this work, it is discovered that, with an ionic liquid-based electrolyte, highly active and stable transition metal trichalcogenide alloy catalysts of Sb_0.67Bi_1.33X₃ (X = S, Te) enable operation of the Li-CO₂ battery at a very high current rate of 1 mA cm⁻² for up to 220 cycles. It is revealed that: i) the type of chalcogenide (Te vs S) significantly affects the electronic and catalytic properties of the catalysts, ii) a coupled cation-electron charge transfer process facilitates the carbon dioxide reduction reaction (CO₂RR) occurring during discharge, and iii) the concentration of ionic liquid in the electrolyte controls the number of participating CO₂ molecules in reactions. A combination of these key factors is found to be crucial for a successful operation of the Li-CO₂ chemistry at high current rates. This work introduces a new class of catalysts with potential to fundamentally solve challenges of this type of batteries.     

Pt‐Ir‐Pd Trimetallic Nanocages as a Dual Catalyst for Efficient Oxygen Reduction and Evolution Reactions in Acidic Media

The development of dual catalysts with high efficiency toward oxygen reduction and evolution reactions (ORR and OER) in acidic media is a significant challenge. Here an active and durable dual catalyst based upon cubic Pt₃₉Ir₁₀Pd₁₁ nanocages with an average edge length of 12.3 nm, porous walls as thin as 1.0 nm, and well‐defined {100} facets is reported. The trimetallic nanocages perform better than all the reported dual catalysts in acidic media, with a low ORR‐OER overpotential gap of only 704 mV at a Pt‐Ir‐Pd loading of 16.8 µg_Pt+Ir+Pd cm^?2_geo. For ORR at 0.9 V, when benchmarked against the commercial Pt/C and Pt‐Pd nanocages, the trimetallic nanocages exhibit an enhanced mass activity of 0.52 A mg^?1_Pt+Ir+Pd (about four and two times as high as those of the Pt/C and Pt‐Pd nanocages) and much improved durability. For OER, the trimetallic nanocages show a remarkable mass activity of 0.20 A mg^?1_Pt+Ir at 1.53 V, which is 16.7 and 4.3 fold relative to those of the Pt/C and Pt‐Pd nanocages, respectively. These improvements can be ascribed to the highly open structure of the nanocages, and the possible electronic coupling between Ir and Pt atoms in the lattice.     

The effects of enhanced ozone and enhanced carbon dioxide concentrations on biomass, pigments and antioxidative enzymes in spruce needles (Picea abies L.)

During one growing period, 5-year-old spruce trees (Picea abies L., Karst.) were exposed in environmental chambers to elevated concentrations of carbon dioxide (750 cm³ m^?3) and ozone (008 cm³ m^?3) as single variables or in combination. Control concentrations of the gases were 350cm³ m^?3CO₂ and 0.02 cm³ m ^?3 ozone. To investigate whether an elevated CO₂ concentration can prevent adverse ozone effects by reducing oxidative stress, the activities of the protective enzymes superoxide dismutase, catalase and peroxidase were determined. Furthermore, shoot biomass, pigment and protein contents of two needle age classes were investigated. Ozone caused pigment reduction and visible injury in the previous year's needles and growth reduction in the current year's shoots. In the presence of elevated concentrations of ozone and CO₂, growth reduction in the current year's shoots was prevented, but emergence of visible damage in the previous year's needles was only delayed and pigment reduction was still found. Elevated concentrations of ozone or CO₂ as single variables caused a significant reduction in the activities of superoxide dismutase and catalase in the current year's needles. Minimum activities of superoxide dismutase and catalase and decreased peroxidase activities were found in both needle age classes from spruce trees grown at enhanced concentrations of both CO₂ and ozone. These results suggest a reduced tolerance to oxidative stress in spruce trees under conditions of elevated concentrations of both CO₂ and ozone.     

Activation parameters in flash photolysis studies of Mo(CO)6

Reported is a combined time-resolved optical (TRO) and infrared (TRIR) spectroscopic investigation of the flash photolysis of Mo(CO)₆ in cyclohexane solution. TRIR studies using 308 nm excitation led to transient bleaching of the strong ν_CO band at 1987 cm⁻¹ of Mo(CO)₆ and appearance of new bands at 1931 and 1964 cm⁻¹ attributed to Mo(CO)₅(Sol). Using a high pressure/variable temperature flow cell, the kinetics of back reaction with CO (k_CO) to regenerate the hexacarbonyl was studied over the P_CO range 1-20 atm and at five temperatures. These data gave k_CO=4.6±0.2×10⁶ M⁻¹ s⁻¹ (298 K) and the activation parameters kJ/mol and J mol⁻¹ K⁻¹ from which an interchange mechanism was proposed. The analogous species seen in the TRO experiment displayed a transient absorbance at 420 nm and analogous kinetics properties although at lower P_CO self-trapping with Mo(CO)₆ (to give Mo₂(CO)₁₁) is a competitive process. The Mo(CO)₅(Sol) transient could also be trapped by ⁿPrBr (k_RBr=5.3±0.7×10⁷ M⁻¹ s⁻¹).     

Non-innocent ligand reservoirs for reducing or oxidizing equivalents in carbonylrhenium(I) complexes: 1,1′-Bis(diphenylphosphino)ferrocene (dppf) and bis-triazinyl-pyridine (BTP)

Organometallic complexes of Re(I) with ligands having opposite redox properties have been synthesized and structurally characterized. X-ray crystal structures of the complexes show typical fac-Re^I(CO)₃ coordination to the redox active ligands. Complete electrochemical and spectroelectrochemical studies on the ligands and the metal complexes were performed. The IR-spectroelectrochemical responses were monitored using the fac-Re(CO)₃ unit as a probe. The 15-20 cm⁻¹ hypsochromic or bathochromic shift of the ν_CO bands upon reduction or oxidation is attributed to ligand-centered processes.     

Bi‐Based Metal‐Organic Framework Derived Leafy Bismuth Nanosheets for Carbon Dioxide Electroreduction

Electroreduction of carbon dioxide (CO₂) into high‐value and readily collectable liquid products is vital but remains a substantial challenge due to the lack of highly efficient and robust electrocatalysts. Herein, Bi‐based metal‐organic framework (CAU‐17) derived leafy bismuth nanosheets with a hybrid Bi/Bi? O interface (Bi NSs) is developed, which enables CO₂ reduction to formic acid (HCOOH) with high activity, selectivity, and stability. Specially, the flow cell configuration is employed to eliminate the diffusion effect of CO₂ molecules and simultaneously achieve considerable current density (200 mA cm^?2) for industrial application. The faradaic efficiency for transforming CO₂ to HCOOH can achieve over 85 or 90% in 1 m KHCO₃ or KOH for at least 10 h despite a current density that exceeds 200 mA cm^?2, outperforming most of the reported CO₂ electroreduction catalysts. The hybrid Bi/Bi? O surface of leafy bismuth nanosheets boosts the adsorption of CO₂ and protects the surface structure of the as‐prepared leafy bismuth nanosheets, which benefits its activity and stability for CO₂ electroreduction. This work shows that modifying electrocatalysts by surface oxygen groups is a promising pathway to regulate the activity and stability for selective CO₂ reduction to HCOOH.     

Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

Properties of hemoglobin A and hemoglobin Zurich (beta63 histidine replaced by arginine): quantitative evaluation of functional abnormalities in hemoglobins.

The abnormal hemoglobin Zurich (β₆₃ his→arg) exhibits abnormal properties. Thus, ν_CO occurs at 1951 cm^?1 for HbACO while HbZCO shows bands at 1950 cm^?1 and 1958 cm^?1 for CO bound in α and β chains respectively (the βCOs are displaced less readily by O₂). Acid catalyzed reductive displacement of superoxide by azide is slower on the β chain of HbZO₂ than on the α chain under conditions where with HbAO₂ both chains appear equally reactive. The one electron donor hydroquinone produces metHb and peroxide more rapidly from HbZO₂ than from HbAO₂. These property differences can be related to the β₆₃ residue. Such studies provide generally useful probes of the structural basis for hemoglobin diseases.     

Mechanistic insight into effect of doping of Ni on CO<Subscript>2</Subscript> reduction on the (111) facet of Cu: thermodynamic and kinetic analyses of the elementary steps

A systematic mechanistic investigation of CO₂ reduction on a Ni-modified Cu(111) surface is performed based on an extensive set of density functional theory (DFT) calculations by focusing on the hydrocarbon CH₄ formation pathways. By carefully analyzing reduction pathways on the Ni-modified Cu(111) surface, some important mechanistic information is deduced. The presence of Ni stabilizes all reaction intermediates, and thus reduces the activation barrier for almost all CO₂ reduction steps. Most importantly, it can considerably lower than the activation barrier of CO₂ hydrogenative dissociation into CO, which is the rate-determining step of CO₂ reduction on a pure Cu(111) surface. Thus, the doping of Ni atom is able to activate CO₂, leading to enhanced surface activity of CO₂ reduction into hydrocarbons. Notably, the activation barriers that are required for CH₄ and CH₃OH formation are almost all easily overcome through the thermoactive process at ambient temperatures after doping of Ni atom. Thus, a higher CH₄ and CH₃OH yield may be expected in the presence of the doped Ni atom. Thermodynamic analyses indicate that doping of Ni may reduce the overpotential of CO formation through CO₂ hydrogenative dissociation. On this basis, two decriptors may be proposed in order to describe the catalytic activity of Cu-based catalysts for CO₂ reduction, and a perfect Cu-based alloy in CO₂ reduction should moderately bind CO and form and reduce CO more easily. Simutaneously, CO hydrogenation occurs more easily on the (111) facet of Ni-modified Cu than dimerization, thereby the selectivity of (111) facet of Cu on production CH₄ is further confirmed to some degree. The present study reveals a rich reaction chemistry and provides new insights to guide the rational design of Cu-based alloy catalysts for hydrocarbons formation from CO₂ reduction.

Open image in new window

Graphical Abstract Reduction pathways of CO₂ into hydrocarbons?

     

Metal‐Free Artificial Photosynthesis of Carbon Monoxide Using N‐Doped ZnTe Nanorod Photocathode Decorated with N‐Doped Carbon Electrocatalyst Layer

An artificial photosynthesis system based on N‐doped ZnTe nanorods decorated with an N‐doped carbon electrocatalyst layer is fabricated via an all‐solution process for the selective conversion of CO₂ to CO. Substitutional N‐doping into the ZnTe lattice decreases the bandgap slightly and improves the charge transfer characteristics, leading to enhanced photoelectrochemical activity. Remarkable N‐doping effects are also demonstrated by the N‐doped carbon layer that promotes selective CO₂‐to‐CO conversion instead of undesired water‐to‐H₂ reduction by providing active sites for CO₂ adsorption and activation, even in the absence of metallic redox centers. The photocathode shows promising performance in photocurrent generation (?1.21 mA cm^?2 at ?0.11 V_RHE), CO selectivity (dominant CO production of ≈72%), minor H₂ reduction (≈20%), and stability (corrosion suppression). The metal‐free electrocatalyst/photocatalyst combination prepared via a cost‐effective solution process exhibits high performance due to synergistic effects between them, and thus may find application in practical solar fuel production.