Nitrogen‐Doped Carbon‐Coated CuO‐In2O3 p–n Heterojunction for Remarkable Photocatalytic Hydrogen Evolution

CuO as a catalyst has shown promising application prospects in photocatalytic splitting of water into hydrogen (H₂). However, the instability of CuO in amine aqueous solution limits the applications of CuO‐based photocatalysts in the photocatalytic H₂ evolution. In this work, a novel dodecahedral nitrogen (N)‐doped carbon (C) coated CuO‐In₂O₃ p–n heterojunction (DNCPH) is designed and synthesized by directly pyrolyzing benzimidazole‐modified dodecahedral Cu/In‐based metal‐organic frameworks, showing long‐term stability in triethanolamine (TEOA) aqueous solution and excellent photocatalytic H₂ production efficiency. The improved stability of DNCPH in TEOA solution is ascribed to the alleviation of electron deficiency in CuO by forming the p–n heterojunction and the protection with coated N‐doped C layer. Based on detailed theoretical calculations and experimental studies, it is found that the improved separation efficiency of photogenerated electron/hole pairs and the mediated adsorption behavior (|?G_H*|→0) by coupling N‐doped C layer with CuO‐In₂O₃ p–n heterojunction lead to the excellent photocatalytic H₂ production efficiency of DNCPH. This work provides a feasible strategy for effectively applying CuO‐based photocatalysts in photocatalytic H₂ production.     

Seamlessly Conductive 3D Nanoarchitecture of Core–Shell Ni‐Co Nanowire Network for Highly Efficient Oxygen Evolution

Electrochemical splitting of water is an attractive way to produce hydrogen fuel as a clean and renewable energy source. However, a major challenge is to accelerate the sluggish kinetics of the anodic half‐cell reaction where oxygen evolution reaction (OER) takes place. Here, a seamlessly conductive 3D architecture is reported with a carbon‐shelled Ni‐Co nanowire network as a highly efficient OER electrocatalyst. Highly porous and granular Ni‐Co nanowires are first grown on a carbon fiber woven fabric utilizing a cost‐effective hydrothermal method and then conductive carbon shell is coated on the Ni‐Co nanowires via glucose carbonization and annealing processes. The conductive carbon layer surrounding the nanowires is introduced to provide a continuous pathway for facile electron transport throughout the whole of the integrated 3D catalyst. This 3D hierarchical structure provides several synergistic effects and beneficial functions including a large number of active sites, easy accessibility of water, fast electron transport, rapid release of oxygen gas, enhanced electrochemical durability, and stronger structural integrity, resulting in a remarkable OER activity that delivers an overpotential of 302 mV with a Tafel slope of 43.6 mV dec^?1 at a current density of 10 mA cm^?2 in an alkaline medium electrolyte (1 m KOH).     

Au/TiO2–gC3N4 Nanocomposites for Enhanced Photocatalytic H2 Production from Water under Visible Light Irradiation with Very Low Quantities of Sacrificial Agents

Here for the first time the design and optimization are presented of a three‐component Au/TiO₂–gC₃N₄ nanocomposite photocatalyst able to efficiently produce H₂ from water using very low amounts of sacrificial agents and under visible light irradiation. This enhanced photocatalytic behavior compared to Au/TiO₂ and Au/gC₃N₄ materials is the result of synergetic effects due to high quality assembly and interface between the three components. This optimized nanoscale assembly characterized by simultaneous favorable nanoheterojunction formation between g‐C₃N₄ and TiO₂ semiconductors, as well as AuNPs/gC₃N₄ and AuNPs/TiO₂ junctions, leads to enhanced visible light harvesting, charge separation, and H₂ production. This composite photocatalyst yields a high H₂ production (350 µmol^?1 h^?1 g_catalyst^?1) under visible light irradiation with minimal amounts of sacrificial agent (≤1 vol%), corresponding to activities much higher than reported so far under comparable conditions.     

Drastic Layer‐Number‐Dependent Activity Enhancement in Photocatalytic H2 Evolution over nMoS2/CdS (n ≥ 1) Under Visible Light

Exploiting noble‐metal‐free cocatalysts is of huge interest for photocatalytic water splitting using solar energy. As an efficient cocatalyst in photocatalysis, MoS₂ is shown promise as a low‐cost alternative to Pt for hydrogen evolution. Here we report a systematical study on controlled synthesis of MoS₂ with layer number ranging from ≈1 to 112 and their activities for photocatalytic H₂ evolution over commercial CdS. A drastic increase in photocatalytic H₂ evolution is observed with decreasing MoS₂ layer number. Particularly for the single‐layer (SL) MoS₂, the SL‐MoS₂/CdS sample reaches a high H₂ generation rate of ≈2.01 × 10^?3m h^?1 in Na₂S–Na₂SO₃ solutions and ≈2.59 × 10^?3m h^?1 in lactic acid solutions, corresponding to an apparent quantum efficiency of 30.2% and 38.4% at 420 nm, respectively. In addition to the more exposed edges and unsaturated active S atoms, valence band–XPS and Mott–Schottky plots analysis indicate that the SL MoS₂ has the more negative conduction band energy level than the H⁺/H₂ potential, facilitating the hydrogen reduction.     

Ultrastable In‐Plane 1T–2H MoS2 Heterostructures for Enhanced Hydrogen Evolution Reaction

Metallic 1T MoS₂ is highly desirable for catalyzing electrochemical hydrogen production from water owing to its high electrical conductivity. However, stable 1T MoS₂ is difficult to be produced in large‐scale by either common chemical or physical approaches. Here, ultrastable in‐plane 1T–2H MoS₂ heterostructures are achieved via a simple one‐pot annealing treatment of 2H MoS₂ bulk under a mixture gas of Ar and phosphorous vapor, where phosphorus cannot only occupy the interspace of MoS₂ bulk, resulting in the expansion of MoS_2, but also embed into the lattice of MoS_2, inducing the partial phase transition from 2H to 1T phases of MoS₂. Benefiting from its significantly improved electrical conductivity, highly exposed active sites, and hydrophily property, in‐plane 1T–2H MoS₂ heterostructures exhibit largely improved electrocatalytic properties for hydrogen evolution reaction (HER) in alkaline electrolytes.     

Leaf‐Mosaic‐Inspired Vine‐Like Graphitic Carbon Nitride Showing High Light Absorption and Efficient Photocatalytic Hydrogen Evolution

Green plants use solar energy efficiently in nature. Simulating the exquisite structure of a natural photosynthesis system may open a new approach for the construction of desirable photocatalysts with high light harvesting efficiency and performance. Herein, inspired by the excellent light utilization of “leaf mosaic” in plants, a novel vine‐like g‐C₃N₄ (V‐CN) is synthesized for the first time by copolymerizing urea with dicyandiamide‐formaldehyde (DF) resin. The as‐prepared V‐CN exhibits ultrahigh photocatalytic hydrogen production of 13.6 mmol g^?1 h^?1 under visible light and an apparent quantum yield of 12.7% at 420 nm, which is ≈38 times higher than that of traditional g‐C₃N₄, representing one of the highest‐activity g‐C₃N₄‐based photocatalysts. This super photocatalytic performance is derived from the unique leaf mosaic structure of V‐CN, which effectively improves its light utilization and affords a larger specific surface area. In addition, the introduction of DF resin further optimizes the energy band of V‐CN, extends its light absorption, and improves its crystallinity and interfacial charge transport, resulting in high performance. It is an easy and green strategy for the preparation of broad‐spectrum, high‐performance g‐C₃N₄, which presents significant advancement for the design of other nanophotocatalysts by simulating the fine structure of natural photosynthesis.     

Nanodiamond‐Embedded p‐Type Copper(I) Oxide Nanocrystals for Broad‐Spectrum Photocatalytic Hydrogen Evolution

Copper(I) oxide (Cu₂O) is an attractive photocatalyst because of its abundance, low toxicity, environmental compatibility, and narrow direct band gap, which allows efficient light harvesting. However, Cu₂O exhibits poor photocatalytic performance and photostability because of its short electron diffusion length and low hole mobility. Here, it is demonstrated that nanodiamond (ND) can greatly improve the photocatalytic hydrogen evolution reaction (HER) of the p‐type photocatalyst Cu₂O nanocrystals by nanocomposition. Compared with pure Cu₂O nanocrystals, this composite shows a tremendous improvement in HER performance and photostability. HER rates of 100.0 mg NDs‐Cu₂O nanocrystals are 1597 and 824 under the simulated solar light irradiation (AM 1.5, 100 mW cm^?2) and visible light irradiation (420–760 nm, 77.5 mW cm^?2), respectively. The solar‐to‐hydrogen conversion efficiency of this composite is 0.85%, which is nearly ten times higher than that of pure Cu₂O. The quantum efficiency of the composite is high, with values of 0.17% at and 0.23% at . The broad spectral response of ND provides numerous carriers for the subsequent reactions. The electron‐donating ability of ND and suitable band structures of the two components promote electron injection from ND to Cu₂O. These results suggest the broad applicability of ND to ameliorate the photoelectric properties of semiconductors.     

High Activity Hydrogen Evolution Catalysis by Uniquely Designed Amorphous/Metal Interface of Core–shell Phosphosulfide/N‐Doped CNTs

A cost effective hydrogen evolution reaction (HER) catalyst that does not use precious metallic elements is a crucial demand for environment‐benign energy production. The family of earth‐abundant transition metal compounds of nitrides, carbides, chalcogenides, and phosphides is one of the promising candidates for such a purpose, particularly in acidic conditions. However, its catalytic performance is still needed to be enhanced through novel material designs and crystalline engineering. Herein, a chemically and electronically coupled transition metal phosphosulfide/N‐doped carbon nanotubes (NCNT) hybrid electrocatalyst is fabricated via a two‐step synthesis. The uniquely designed synthesis leads to the material morphology featuring a core–shell structure, in which the crystalline metal phosphide core is surrounded by an amorphous phosphosulfide nanoshell. Notably, due to the favorable modification of chemical composition and surface properties, core–shell CoP@PS/NCNT exhibits the noticeable HER activity of approximately ?80 mV @ ?10 mA cm^?2 with excellent durability, which is one of the highest active nonnoble metal electrocatalysts ever reported thus far.     

H2‐Directing Strategy on In Situ Synthesis of Co‐MoS2 with Highly Expanded Interlayer for Elegant HER Activity and its Mechanism

MoS₂ has drawn great attention as a promising Pt‐substituting catalyst for the hydrogen evolution reaction (HER). This work utilizes H₂ as the structure directing agent (SDA) to in situ synthesize a range of Co‐MoS₂‐n (n = 0, 0.5, 1.0, 1.4, 2.0) with expanded interlayer spacings (d = 9.2 – 11.1 Å), which significantly boost their HER activities. The Co‐MoS₂‐1.4 with an interlayer spacing of 10.3 Å presents an extremely low overpotential of 56 mV (at 10 mA cm^?2) and a Tafel slope of 32 mV dec^?1, which is superior than most reported MoS₂‐based catalysts. Density function theory calculations are used to gain insights that i) the H₂ can be dissociatively adsorbed on MoS₂ and greatly affect the related surface free energy by regulating the interlayer spacing; ii) the expanded interlayer spacing can significantly decrease the absolute value of ΔG_H, thereby leading to greatly promoted HER activity. Additionally, the large amounts of 1T phase (73.9–79.2%) and Co‐Mo‐S active sites (40.9–91.3%) also contribute to the enhanced HER activity of the synthesized samples. Overall, a simple new strategy for in situ synthesis of Co‐MoS₂ with an expanded interlayer spacing is proposed, which sheds light on other 2D energy material designs.     

Hierarchical NiCo2S4@NiO Core–Shell Heterostructures as Catalytic Cathode for Long‐Life Li‐O2 Batteries

The critical challenges of Li‐O₂ batteries lie in sluggish oxygen redox kinetics and undesirable parasitic reactions during the oxygen reduction reaction and oxygen evolution reaction processes, inducing large overpotential and inferior cycle stability. Herein, an elaborately designed 3D hierarchical heterostructure comprising NiCo₂S₄@NiO core–shell arrays on conductive carbon paper is first reported as a freestanding cathode for Li‐O₂ batteries. The unique hierarchical array structures can build up multidimensional channels for oxygen diffusion and electrolyte impregnation. A built‐in interfacial potential between NiCo₂S₄ and NiO can drastically enhance interfacial charge transfer kinetics. According to density functional theory calculations, intrinsic LiO₂‐affinity characteristics of NiCo₂S₄ and NiO play an importantly synergistic role in promoting the formation of large peasecod‐like Li₂O₂, conducive to construct a low‐impedance Li₂O₂/cathode contact interface. As expected, Li‐O₂ cells based on NiCo₂S₄@NiO electrode exhibit an improved overpotential of 0.88 V, a high discharge capacity of 10 050 mAh g^?1 at 200 mA g^?1, an excellent rate capability of 6150 mAh g^?1 at 1.0 A g^?1, and a long‐term cycle stability under a restricted capacity of 1000 mAh g^?1 at 200 mA g^?1. Notably, the reported strategy about heterostructure accouplement may pave a new avenue for the effective electrocatalyst design for Li‐O₂ batteries.     

High Efficiency Photocatalytic Water Splitting Using 2D α‐Fe2O3/g‐C3N4 Z‐Scheme Catalysts

Photocatalysis is the most promising method for achieving artificial photosynthesis, but a bottleneck is encountered in finding materials that could efficiently promote the water splitting reaction. The nontoxicity, low cost, and versatility of photocatalysts make them especially attractive for this application. This study demonstrates that small amounts of α‐Fe₂O₃ nanosheets can actively promote exfoliation of g‐C₃N₄, producing 2D hybrid that exhibits tight interfaces and an all‐solid‐state Z‐scheme junction. These nanostructured hybrids present a high H₂ evolution rate >3 × 10⁴ µmol g^‐1 h^‐1 and external quantum efficiency of 44.35% at λ = 420 nm, the highest value so far reported among the family of g‐C₃N₄ photocatalysts. Besides effectively suppressing the recombination of electron–hole pairs, this Z‐scheme junction also exhibits activity toward overall water splitting without any sacrificial donor. The proposed synthetic route for controlled production of 2D g‐C₃N₄‐based structures provides a scalable alternative toward the development of highly efficient and active photocatalysts.     

Efficient and Stable TiO2:Pt–Cu(In,Ga)Se2 Composite Photoelectrodes for Visible Light Driven Hydrogen Evolution

Novel thin film composite photocathodes based on device‐grade Cu(In,Ga)Se₂ chalcopyrite thin film absorbers and transparent conductive oxide Pt‐implemented TiO₂ layers on top are presented for an efficient and stable solar‐driven hydrogen evolution. Thin films of phase‐pure anatase TiO₂ are implemented with varying Pt‐concentrations in order to optimize simultaneously i) conductivity of the films, ii) electrocatalytic activity, and iii) light‐guidance toward the chalcopyrite. Thereby, high incident‐photon‐to‐current‐efficiencies of more than 80% can be achieved over the full visible light range. In acidic electrolyte (pH 0.3), the most efficient Pt‐implemented TiO₂–Cu(In,Ga)Se₂ composite electrodes reveal i) photocurrent densities up to 38 mA cm^?2 in the saturation region (?0.4 V RHE, reversible hydrogen electrode), ii) 15 mA cm^?2 at the thermodynamic potential for H₂‐evolution (0 V RHE), and iii) an anodic onset potential shift for the hydrogen evolution (+0.23 V RHE). It is shown that the gradual increase of the Pt‐concentration within the TiO₂ layers passes through an efficiency‐ and stability‐maximum of the device (5 vol% of Pt precursor solution). At this maximum, optimized light‐incoupling into the device‐grade chalcopyrite light‐absorber as well as electron conductance properties within the surface layer are achieved while no degradation are observed over more than 24 h of operation.