Extended “Adsorption–Insertion” Model: A New Insight into the Sodium Storage Mechanism of Hard Carbons

Hard carbons (HCs) are promising anodes of sodium‐ion batteries (SIBs) due to their high capacity, abundance, and low cost. However, the sodium storage mechanism of HCs remains unclear with no consensus in the literature. Here, based on the correlation between the microstructure and Na storage behavior of HCs synthesized over a wide pyrolysis temperature range of 600–2500 °C, an extended “adsorption–insertion” sodium storage mechanism is proposed. The microstructure of HCs can be divided into three types with different sodium storage mechanisms. The highly disordered carbon, with d₀₀₂ (above 0.40 nm) large enough for sodium ions to freely transfer in, has a “pseudo‐adsorption” sodium storage mechanism, contributing to sloping capacity above 0.1 V, together with other conventional “defects” (pores, edges, heteroatoms, etc.). The pseudo‐graphitic carbon (d‐spacing in 0.36–0.40 nm) contributes to the low‐potential (<0.1 V) plateau capacity through “interlayer insertion” mechanism, with a theoretical capacity of 279 mAh g^?1 for NaC₈ formation. The graphite‐like carbon with d₀₀₂ below 0.36 nm is inaccessible for sodium ion insertion. The extended “adsorption–insertion” model can accurately explain the dependence of the sodium storage behavior of HCs with different microstructures on the pyrolysis temperature and provides new insight into the design of HC anodes for SIBs.     

Mechanism of Sodium Storage in Hard Carbon: An X‐Ray Scattering Analysis

Hard carbon is a standard anode material for Na‐ion batteries. However, its low crystallinity and diverse microstructures make obtaining a full understanding of the sodium storage mechanism challenging. Here, the results of a systematic ex situ small and wide angle X‐ray scattering study of a series of nanostructured hard carbons, which reveal clear evidence of sodium storage in the graphene–graphene interlayers and nanopores, are presented. Particularly, an emergence of a broad peak around q ≈ 2.0–2.1 Å^?1 in the low voltage region is suggested to be an indicator that sodium is densely confined in the nanopores. Thus, classical X‐ray scattering techniques are demonstrated to be effective in elucidating the overall reaction scheme of Na insertion into hard carbon.     

A Usage Scenario Independent “Air Chargeable” Flexible Zinc Ion Energy Storage Device

A rationally designed “air chargeable” energy storage device is demonstrated, which can be effectively charged by harvesting pervasive energy from the ambient environment. For an “air chargeable” zinc‐ion capacitor system, the system simply consists of a flexible bifunctional “U” shaped electrode (with the functions of energy harvesting and storage), a zinc metal electrode in middle, and two different polyelectrolytes (polyacrylamide and sodium polyacrylate) sandwiched between the zinc metal and “U” shaped electrode. When the zinc‐ion capacitor is exhausted, it can be quickly charged to 88% within 10 min by simply opening the sealing tape and allowing the air diffuse in. The capacitor exhausting‐air charging processes are repeated 60 times and the whole system works well. When the external power supplier is available, both the zinc‐ion capacitor and “air charging” component can be fully recovered. A large capacity (≈1000 mAh) “air chargeable” zinc‐vanadium battery is also demonstrated. The zinc‐vanadium battery can be fully charged by air in 1 h. This work offers a usage scenario independent reliable self‐chargeable power supply system as a promising approach to solve the intermittent and unpredictable nature of currently developed self‐chargeable devices.     

The Sodium Storage Mechanism in Tunnel‐Type Na0.44MnO2 Cathodes and the Way to Ensure Their Durable Operation

Tunnel‐type sodium manganese oxide is a promising cathode material for aqueous/nonaqueous sodium‐ion batteries, however its storage mechanism is not fully understood, in part due to the complicated sodium intercalation process. In addition, low cyclability due to manganese dissolution has limited its practical application in rechargeable batteries. Here, the intricate sodium intercalation mechanism of Na_0.44MnO₂ is revealed by combination of electrochemical characterization, structure determination from powder X‐ray diffraction data, 3D bond valence difference maps, and barrier‐energy calculations of the sodium diffusion. NaI is proposed as an important electrolyte solution additive. It is shown to form a thin, beneficial, and durable cathode surface film that prevents manganese dissolution. The addition of 0.01 m NaI to electrolyte solutions based on alkyl carbonate solvents and NaClO₄ greatly improves the cycling efficiency, raising the capacity retention from 86% to 96% after 600 cycles. This study determines the core aspects of the sodium intercalation mechanism in tunnel‐type sodium manganese oxide and shows how it can serve as a durable cathode material for rechargeable Na batteries.     

Sodium Vanadium Fluorophosphates (NVOPF) Array Cathode Designed for High‐Rate Full Sodium Ion Storage Device

3D batteries continue to be of widespread interest for flexible energy storage where the 3D nanostructured cathode is the key component to achieve both high energy and power densities. While current work on flexible cathodes tends to emphasize the use of flexible scaffolds such as graphene and/or carbon nanotubes, this approach is often limited by poor electrical contact and structural stability. This communication presents a novel synthetic approach to form 3D array cathode for the first time, the single‐crystalline Na₃(VO)₂(PO₄)₂F (NVOPF) by using VO₂ array as a seed layer. The NVOPF cathode exhibits both high‐rate capability (charge/discharge in 60 s) and long‐term durability (10,000 cycles at 50 C) for Na ion storage. Utilizing in situ X‐ray diffraction and first principles calculations, the high‐rate properties are correlated with the small volume change, 2D fast ion transport, and the array morphology. A novel all‐array flexible Na⁺ hybrid energy storage device based on pairing the intercalation‐type NVOPF array cathode with a cogenetic pseudocapacitive VO₂ nanosheet array anode is demonstrated.     

Elucidation of the Sodium‐Storage Mechanism in Hard Carbons

Hard carbons (HCs) are the most promising candidate anode materials for emerging Na‐ion batteries (NIBs). HCs are composed of misaligned graphene sheets with plentiful nanopores and defects, imparting a complex correlation between its structure and sodium‐storage behavior. The currently debated mechanism of Na⁺‐ion insertion in HCs hinders the development of high‐performance NIBs. In this article, ingenious and reliable strategies are used to elaborate the correlation between the structure and electrochemical performance and further illuminate the sodium‐storage mechanism in HCs. First, filling sulfur into the micropores of HCs can remove the low‐voltage plateau, providing solid evidence for its association with the pore‐filling mechanism. Along with the decreased concentration of defects/heteroatoms at higher treatment temperature, the reduced sloping capacity confirms the adsorption mechanism in the sloping region. Finally, the similar sodium‐insertion behaviors of HCs with ether‐based and ester‐based electrolytes indicate that no Na⁺ ions intercalate between the graphene layers. The determined adsorption‐pore‐filling mechanism encourages the design of more efficient HC anode materials with high capacity for high‐energy NIBs.     

Unusual Formation of CoO@C “Dandelions” Derived from 2D Kagóme MOLs for Efficient Lithium Storage

Despite great breakthroughs, the search for anode materials with high performance for lithium‐ion batteries (LIBs) remains challenging. Hence, engineering advantageous structures via effective routes can bring new possibilities to the development of the LIB field. Herein, the precise synthesis of three‐dimensional (3D) hybrids of ultrathin carbon‐wrapped CoO (CoO@C) dandelions is reported by the pyrolysis of two‐dimensional (2D) Kagóme metal–organic layers (MOLs) at 400 °C under an Ar atmosphere. Due to the special coordination structure of the paternal MOLs, the resulting CoO nanowires show a small diameter of 5–10 nm and are uniformly confined within the ultrathin carbon layer. Based on the time‐dependent pyrolysis experiments, a crystal transformation mechanism of in situ self‐templated‐recrystallization‐self‐assembly accompanied by phase and morphology changes is first presented to reveal the formation of the 3D dandelion‐like spheres with assembly of nanowire arrays from a 2D Kagóme MOL. By virtue of structural and compositional features, including a 3D array structure, the small size of the primary ultrathin nanowires, and a uniform ultrathin graphitic carbon layer, these unique CoO@C dandelions display high specific capacity, good rate capability, and excellent cycling stability. Importantly, this approach can be extended to accurately synthesize other desired composite structures.     

Liquid‐Phase Exfoliated Metallic Antimony Nanosheets toward High Volumetric Sodium Storage

Metallic antimony (Sb) with gray allotrope has rarely been considered from the viewpoint of two‐dimension layered system is actually a graphite‐like material, in which Sb layers consist of fused, ruffled, and six‐membered rings. Given that metallic Sb nanosheets can be played like graphene, it would be anticipated to obtain a new anode material with superior electrochemical performances for sodium storage. In this work, we propose an efficient strategy to fabricate free‐standing metallic Sb nanosheets via liquid‐phase exfoliation of gray Sb powder in an ios‐propyle alcohol (IPA) solution with a constant concentration of sodium hydroxide. As a proof of the concept, several hybrid films composed of metallic Sb nanosheets and graphene with tunable densities are achieved, in which the notorious volume change of metallic Sb can be efficiently alleviated with the aid of the good flexible graphene, and the whole density of electrode films can be significantly improved by harnessing the high density of Sb nanosheets. As a consequence, the optimized metallic Sb nanosheets‐graphene (SbNS‐G) film displays a high volumetric capacity of 1226 mAh cm^–3, high‐rate capability and good cycle performance for sodium storage.     

“Uncovering” Industrial Symbiosis

Since 1989, efforts to understand the nature of interfirm resource sharing in the form of industrial symbiosis and to replicate in a deliberate way what was largely self‐organizing in Kalundborg, Denmark have followed many paths, some with much success and some with very little. This article provides a historical view of the motivations and means for pursuing industrial symbiosis—defined to include physical exchanges of materials, energy, water, and by‐products among diversified clusters of firms. It finds that “uncovering” existing symbioses has led to more sustainable industrial development than attempts to design and build eco‐industrial parks incorporating physical exchanges. By examining 15 proposed projects brought to national and international attention by the U.S. President's Council on Sustainable Development beginning in the early 1990s, and contrasting these with another 12 projects observed to share more elements of self‐organization, recommendations are offered to stimulate the identification and uncovering of already existing “kernels” of symbiosis. In addition, policies and practices are suggested to identify early‐stage precursors of potentially larger symbioses that can be nurtured and developed further. The article concludes that environmentally and economically desirable symbiotic exchanges are all around us and now we must shift our gaze to find and foster them.     

Bottom‐Up Confined Synthesis of Nanorod‐in‐Nanotube Structured Sb@N‐C for Durable Lithium and Sodium Storage

Antimony (Sb) has emerged as an attractive anode material for both lithium and sodium ion batteries due to its high theoretical capacity of 660 mA h g^?1. In this work, a novel peapod‐like N‐doped carbon hollow nanotube encapsulated Sb nanorod composite, the so‐called nanorod‐in‐nanotube structured Sb@N‐C, via a bottom‐up confinement approach is designed and fabricated. The N‐doped‐carbon coating and thermal‐reduction process is monitored by in situ high‐temperature X‐ray diffraction characterization. Due to its advanced structural merits, such as sufficient N‐doping, 1D conductive carbon coating, and substantial inner void space, the Sb@N‐C demonstrates superior lithium/sodium storage performance. For lithium storage, the Sb@N‐C exhibits a high reversible capacity (650.8 mA h g^?1 at 0.2 A g^?1), excellent long‐term cycling stability (a capacity decay of only 0.022% per cycle for 3000 cycles at 2 A g^?1), and ultrahigh rate capability (343.3 mA h g^?1 at 20 A g^?1). For sodium storage, the Sb@N‐C nanocomposite displays the best long‐term cycle performance among the reported Sb‐based anode materials (a capacity of 345.6 mA h g^?1 after 3000 cycles at 2 A g^?1) and an impressive rate capability of up to 10 A g^?1. The results demonstrate that the Sb@N‐C nanocomposite is a promising anode material for high‐performance lithium/sodium storage.     

Conductive Li3.08Cr0.02Si0.09V0.9O4 Anode Material: Novel “Zero‐Strain” Characteristic and Superior Electrochemical Li+ Storage

“Zero‐strain” compounds are ideal energy‐storage materials for long‐term cycling because they present negligible volume change and significantly reduce the mechanically induced deterioration during charging–discharging. However, the explored “zero‐strain” compounds are very limited, and their energy densities are low. Here, γ phase Li_3.08Cr_0.02Si_0.09V_0.9O₄ (γ‐LCSVO) is explored as an anode compound for lithium‐ion batteries, and surprisingly its “zero‐strain” Li⁺ storage during Li⁺ insertion–extraction is found through using various state‐of‐the‐art characterization techniques. Li⁺ sequentially inserts into the 4c(1) and 8d sites of γ‐LCSVO, but its maximum unit‐cell volume variation is only ≈0.18%, the smallest among the explored “zero‐strain” compounds. Its mean strain originating from Li⁺ insertion is only 0.07%. Consequently, both γ‐LCSVO nanowires (γ‐LCSVO‐NW) and micrometer‐sized particles (γ‐LCSVO‐MP) exhibit excellent cycling stability with 90.1% and 95.5% capacity retention after as long as 2000 cycles at 10C, respectively. Moreover, γ‐LCSVO‐NW and γ‐LCSVO‐MP respectively deliver large reversible capacities of 445.7 and 305.8 mAh g^?1 at 0.1C, and retain 251.2 and 78.4 mAh g^?1 at 10C. Additionally, γ‐LCSVO shows a suitably safe operating potential of ≈1.0 V, significantly lower than that of the famous “zero‐strain” Li₄Ti₅O₁₂ (≈1.6 V). These merits demonstrate that γ‐LCSVO can be a practical anode compound for stable, high‐energy, fast‐charging, and safe Li⁺ storage.     

Boosting Fast Sodium Storage of a Large‐Scalable Carbon Anode with an Ultralong Cycle Life

Sodium‐ion batteries (SIBs) are considered to be a promising alternative for large‐scale electricity storage. However, it is urgent to develop new anode materials with superior ultralong cycle life performance at high current rates. Herein, a low‐cost and large‐scalable sulfur‐doped carbon anode material that exhibits the best high‐rate cycle performance and the longest cycle life ever reported for carbon anodes is developed. The material delivers a reversible capacity of 142 mA h g^?1 at a current rate up to 10 A g^?1. After 10 000 cycles the capacity is remained at 126.5 mA h g^?1; 89.1% of the initial value. Density functional theory computations demonstrate that the sulfur‐doped carbon has a strong binding affinity for sodium which promotes sodium storage. Meanwhile, the kinetics analysis identifies the capacitive charge storage as a large contributor to sodium storage, which favors ultrafast storage of sodium ions. These results demonstrate a new way to design carbon‐based SIBs anodes for next‐generation large‐scale electricity storage.     

Biosynthesis “debugged”: Novel bioproduction strategies

The production of chemicals from biogenic resources is widely performed using microorganisms. These often do not meet the requirements of technical processes due to the narrow limits of microbial physiology. As a consequence, alternatives are sought. Cell‐free enzymatic reaction cascades were recently proposed as next‐generation bioproduction systems. Here, we address problems of microbial systems, show potential advantages of cell‐free concepts and give an overview over the state of the technology. Furthermore, we address current challenges of the cell‐free strategy and give an outlook on future developments.     

Manipulating Adsorption–Insertion Mechanisms in Nanostructured Carbon Materials for High‐Efficiency Sodium Ion Storage

Hard carbon is one of the most promising anode materials for sodium‐ion batteries, but the low Coulombic efficiency is still a key barrier. In this paper, a series of nanostructured hard carbon materials with controlled architectures is synthesized. Using a combination of in situ X‐ray diffraction mapping, ex situ nuclear magnetic resonance (NMR), electron paramagnetic resonance, electrochemical techniques, and simulations, an “adsorption–intercalation” mechanism is established for Na ion storage. During the initial stages of Na insertion, Na ions adsorb on the defect sites of hard carbon with a wide adsorption energy distribution, producing a sloping voltage profile. In the second stage, Na ions intercalate into graphitic layers with suitable spacing to form NaC _x compounds similar to the Li ion intercalation process in graphite, producing a flat low voltage plateau. The cation intercalation with a flat voltage plateau should be enhanced and the sloping region should be avoided. Guided by this knowledge, nonporous hard carbon material has been developed which has achieved high reversible capacity and Coulombic efficiency to fulfill practical application.     

Hollandite‐Type VO1.75(OH)0.5: Effective Sodium Storage for High‐Performance Sodium‐Ion Batteries

Nanosized hollandite‐type VO_1.75(OH)_0.5 is introduced as a novel cathode material for Na‐ion batteries. Structural investigation based on X‐ray diffraction and Rietveld refinement suggests the presence of numerous vacant sites for Na⁺ intercalation in the VO_1.75(OH)_0.5 structure. All of the possible Na⁺ sites and tunnel‐type Na⁺ diffusion pathways along the c‐axis are confirmed by bond‐valence‐sum analyses. The nanosized hollandite‐type VO_1.75(OH)_0.5 delivers an unexpectedly high specific capacity of ≈351 mAh g^?1 at 15.5 mA g^?1 in the voltage range of 1.0–3.7 V (vs Na⁺/Na), which agrees well with the results predicted by first‐principles calculations. In addition, combined studies using first‐principles calculations and several experimental techniques including in situ operando X‐ray diffraction and ex situ X‐ray absorption spectroscopy confirm that the nanosized hollandite‐type VO_1.75(OH)_0.5 undergoes a single‐phase reaction with a capacity retention of 71% over 200 cycles. Furthermore, the open structure and nanosized particles of hollandite‐type VO_1.75(OH)_0.5 contribute to its excellent power capability with 56% of the capacity measured at 0.05 C being delivered at 7 C.     

Exosomes: Revisiting their role as “garbage bags”

In recent years, the term “extracellular vesicle” (EV) has been used to define different types of vesicles released by various cells. It includes plasma membrane‐derived vesicles (ectosomes/microvesicles) and endosome‐derived vesicles (exosomes). Although it remains difficult to evaluate the compartment of origin of the two kinds of vesicles once released, it is critical to discriminate these vesicles because their mode of biogenesis is probably directly related to their physiologic function and/or to the physio‐pathologic state of the producing cell. The purpose of this review is to specifically consider exosome secretion and its consequences in terms of a material loss for producing cells, rather than on the effects of exosomes once they are taken up by recipient cells. I especially describe one putative basic function of exosomes, that is, to convey material out of cells for off‐site degradation by recipient cells. As illustrated by some examples, these components could be evacuated from cells for various reasons, for example, to promote “differentiation” or enhance homeostatic responses. This basic function might explain why so many diseases have made use of the exosomal pathway during pathogenesis.     

Na‐Ion Intercalation and Charge Storage Mechanism in 2D Vanadium Carbide

2D vanadium carbide MXene containing surface functional groups (denoted as V₂CT_x , where T_x are surface functional groups) is synthesized and studied as anode material for Na‐ion batteries. V₂CT_x anode exhibits reversible charge storage with good cycling stability and high rate capability through electrochemical test. The charge storage mechanism of V₂CT_x material during Na⁺ intercalation/deintercalation and the redox reaction of vanadium are studied using a combination of synchrotron based X‐ray diffraction, hard X‐ray absorption near edge spectroscopy (XANES), and soft X‐ray absorption spectroscopy (sXAS). Experimental evidence of a major contribution of redox reaction of vanadium to the charge storage and the reversible capacity of V₂CT_x during sodiation/desodiation process are provided through V K ‐edge XANES and V L _2,3‐edge sXAS results. A correlation between the CO₃^2? content and the Na⁺ intercalation/deintercalation states in the V₂CT_x electrode observed from C and O K ‐edge in sXAS results implies that some additional charge storage reactions may take place between the Na⁺‐intercalated V₂CT_x and the carbonate‐based nonaqueous electrolyte. The results of this study provide valuable information for the further studies on V₂CT_x as anode material for Na‐ion batteries and capacitors.