In Situ NMR Verification for Stacking Pressure-Induced Lithium Deposition and Dead Lithium in Anode-Free Lithium Metal Batteries

Anode-free lithium metal batteries have emerged as strong contenders for next-generation rechargeable batteries due to their ultra-high energy density. However, their safety and life span are insufficient because of the easy generation of dendrites and dead lithium during lithium plating and stripping. Understanding the formation mechanism for lithium dendrites and dead lithium is essential to further improve battery performance. By employing in situ solid-state nuclear magnetic resonance (NMR) spectroscopy, the influence of stacking pressure on dendritic behavior and dead lithium is systematically investigated. At 0.1 MPa, lithium dendrite is rapidly formed, followed by a linear increase of dead lithium. High stacking pressure not only causes lithium metal to fracture but also leads to form dendrites and dead lithium at the fracture site. At 0.5 MPa stacking pressure, the least quantity of dead lithium is attained, and the growth pattern of dead lithium is exponential growth. The exponential growth pattern is distinguished by the high growth of dead lithium early in the battery cycle and essentially no growth later in the cycle. As a result, it is believed that efficient suppression of dead lithium generation early in battery cycling can play a critical role in improving battery performance.     

Temperature-Mediated Dynamic Lithium Loss and its Implications for High-Efficiency Lithium Metal Anodes

Lithium (Li) metal has been strongly regarded as the ultimate anode option for next-generation high-energy-density batteries. Nevertheless, the insufficient Coulombic efficiency induced by the extensive active Li loss largely hinders the practical operation of Li metal batteries under wide temperature range. Herein, the temperature-mediated dynamic growth of inactive Li from −20 to 60°C via titration gas chromatograph measurements is quantitatively decoupled. Combined X-ray photoelectronic spectroscopy, cryo-transmission electronic microscopy, and scanning electronic microscopy methods depicted that both solid electrolyte interphase (SEI) characteristics and Li deposition compactness can be profoundly manipulated by working temperature. The elevation of temperature is found to fundamentally aggravate the parasitic reactions and deteriorate the spatial uniformity of SEI, yet promote the lateral growth of Li by kinetic reason. The opposite effects of temperature on SEI properties and Li deposition compactness can properly explain the intricate temperature-dependent growth rates of SEI-Li⁺ and dead Li⁰ capacity loss observed under titration gas chromatograph measurements. Design implications towards more stable Li metal anodes with higher reversibility can thus be yielded.     

Microscale Lithium Metal Stored inside Cellular Graphene Scaffold toward Advanced Metallic Lithium Anodes

The volume expansion and dendrite growth of metallic Li anode during charge/discharge processes hinder its practical application in energy storage. Seeking an appropriate host for distributing bulk Li in a 3D manner is an effective way to solve these problems. Here, a novel porous graphene scaffold with cellular chambers for incorporating Li metal is presented. Using such a unique host, ultrathin Li layers of 3 µm in thickness are anchored on graphene to form porous microstructures, which provides much more reaction sites for Li ions compared with that of bulk Li, significantly promoting the reversibility of Li stripping and plating. Also the high current density can be effectively dissipated by the graphene scaffold to remarkably improve the rate capability of Li anode. The symmetrical Li cell using such a Li anode can run stably for 200 cycles at 5 mA cm^?2 and even 70 cycles at 10 mA cm^?2 in an unmodified carbonate‐based electrolyte, which has rarely been achieved in such aggressive working conditions. Lithium‐ion capacitor cells using this anode also show outstanding rate capability and cycling stability, which can work at an ultrahigh current density of 30 A g^?1 and keep steady for over 4000 cycles at 3.75 A g^?1.     

A Coaxial‐Interweaved Hybrid Lithium Metal Anode for Long‐Lifespan Lithium Metal Batteries

Lithium (Li) metal is one of the most promising anode materials to construct next‐generation rechargeable batteries owing to its ultrahigh theoretical capacity and the lowest electrochemical potential. Unfortunately, practical application of Li metal batteries is severely hindered by short lifespan and safety concerns caused by Li dendrite growth during cycling. Herein, a coaxial‐interweaved hybrid Li metal anode is proposed for dendrite inhibition that significantly improves the cycling stability of Li metal batteries. The hybrid Li metal anode is fabricated by Li composition into a 3D interweaved scaffold, where each fiber of the interwoven scaffold is composed of a conductive skeleton and a coaxial lithiophilic layer modified on the surface. The coaxial‐interweaved structure endows the hybrid anode with favored Li affinity to guide uniform Li deposition, sufficient channels for ion transportation and electron conduction, and enhanced stability during Li plating and stripping. Consequently, the hybrid Li metal anode affords high Coulombic efficiency over 98.5% for 750 cycles with dendrite‐free morphologies in half cells and improved capacity retention of 80.1% after 100 cycles in LiFePO₄ full cells. The innovative coaxial‐interweaved hybrid Li metal anode demonstrates multiscale design strategy from lithiophilic modification to scaffold construction and promises the prospect of Li metal batteries for future applications.     

Plating/Stripping Behavior of Actual Lithium Metal Anode

Lithium (Li) metal anodes exhibits the potential to enable rechargeable Li batteries with a high energy density. However, the irreversible plating and stripping behaviors of Li metal anodes with high reactivity and dendrite growth when matching different cathodes in working cells are not fully understood yet. Herein the working manner of very thin Li metal anodes (50 µm, 10 mAh cm^?2) is probed with different sequences of Li plating and stripping at 3.0 mA cm^?2 and 3.0 mAh cm^?2. Dendrite growth and dead Li forms on the surface of the initially plated Li electrode (P‐Li), while Li dendrites form in the pit of the initially stripped Li electrode (S‐Li). This induces the differences in reactive sites, distribution of dead Li, and voltage polarization of Li metal anodes. There is a gap of 15–20 and 13–16 mV for the end voltages between S‐Li and P‐Li during stripping and plating, respectively. When matching LiFePO₄ and FePO₄ cathodes, P‐Li | LiFePO₄ cells exhibit a 30‐cycle longer lifespan with smaller end polarization due to differences in the sequences of Li plating and stripping. This contribution affords emerging working principles for actual Li metal anodes when matching lithium‐containing and lithium‐free cathodes.     

Uniform Lithium Deposition Assisted by Single‐Atom Doping toward High‐Performance Lithium Metal Anodes

For a long time lithium (Li) metal has been considered one of the most promising anodes for next‐generation rechargeable batteries. Despite decades of concentrated research, its practical application is still hindered by dendritic Li deposition and infinite volume change of Li metal anodes. Here, atomically dispersed metals doped graphene is synthesized to regulate Li metal nucleation and guide Li metal deposition. The single‐atom (SA) metals, supported on the nitrogen‐doped graphene can not only increase the Li adsorption energy of the localized area around the metal atomic sites with a moderate adsorption energy gradient but also improve the atomic structural stability of the overall materials by constructing a coordination mode of M‐N_x‐C (M, N, and C denoted as metal, nitrogen, and carbon atoms, respectively). As a result, the as‐obtained electrode exhibits an ultralow voltage hysteresis of 19 mV, a high average Coulombic efficiency of 98.45% over 250 cycles, and a stable Li plating/stripping performance even at a high current density of 4.0 mA cm^?2. This work demonstrates the application of SA metal doping in the rational design of Li metal anodes and provides a new concept for further development of Li metal batteries.     

Tailoring Lithium Deposition via an SEI‐Functionalized Membrane Derived from LiF Decorated Layered Carbon Structure

Lithium (Li) metal is a key anode material for constructing next generation high energy density batteries. However, dendritic Li deposition and unstable solid electrolyte interphase (SEI) layers still prevent practical application of Li metal anodes. In this work, it is demonstrated that an uniform Li coating can be achieved in a lithium fluoride (LiF) decorated layered structure of stacked graphene (SG), leading to the formation of an SEI‐functionalized membrane that retards electron transfer by three orders of magnitude to avoid undesirable Li deposition on the top surface, and ameliorates Li⁺ ion migration to enable uniform and dendrite‐free Li deposition beneath such an interlayer. Surface chemistry analysis and density functional theory calculations demonstrate that these beneficial features arise from the formation of C–F_x surface components on the SG sheets during the Li coating process. Based on such an SEI‐functionalized membrane, stable cycling at high current densities up to 3 mA cm^?2 and Li plating capacities up to 4 mAh cm^?2 can be realized in LiPF₆/carbonate electrolytes. This work elucidates the promising strategy of modifying Li plating behavior through the SEI‐functionalized carbon structure, with significantly improved cycling stability of rechargeable Li metal anodes.     

Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries

Safety issues caused by the metallic lithium inside a battery represent one of the main reasons for the lack of commercial availability of rechargeable lithium‐metal batteries. The advantage of anodes based on coated lithium powder (CLiP), compared to plain lithium foil, include the suppression of dendrite formation, as the local current density during stripping/plating is reduced due to the higher surface area. Another performance and safety advantage of lithium powder is the precisely controlled mass loading of the lithium anode during electrode preparation, giving the opportunity to avoid Li excess in the cell. As an additional benefit, the coating makes electrode manufacturing safer and eases handling. Here, electrodes based on coated lithium powder electrodes (CLiP) are introduced for application in lithium‐metal batteries. These electrodes are compared to lithium foil electrodes with respect to cycling stability, coulombic efficiency of lithium stripping/plating, overpotential, and morphology changes during cycling.     

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode

Artificial solid‐electrolyte interphase (SEI) is one of the key approaches in addressing the low reversibility and dendritic growth problems of lithium metal anode, yet its current effect is still insufficient due to insufficient stability. Here, a new principle of “simultaneous high ionic conductivity and homogeneity” is proposed for stabilizing SEI and lithium metal anodes. Fabricated by a facile, environmentally friendly, and low‐cost lithium solid‐sulfur vapor reaction at elevated temperature, a designed lithium sulfide protective layer successfully maintains its protection function during cycling, which is confirmed by both simulations and experiments. Stable dendrite‐free cycling of lithium metal anode is realized even at a high areal capacity of 5 mAh cm^?2, and prototype Li–Li₄Ti₅O₁₂ cell with limited lithium also achieves 900 stable cycles. These findings give new insight into the ideal SEI composition and structure and provide new design strategies for stable lithium metal batteries.     

Advanced Energy‐Storage Architectures Composed of Spinel Lithium Metal Oxide Nanocrystal on Carbon Textiles

Current battery technologies are known to suffer from kinetic problems associated with the solid‐state diffusion of Li⁺ in intercalation electrodes materials. Not only the use of nanostructure materials but also the design of electrode architectures can lead to more advanced properties. Here, advanced electrode architectures consisting of carbon textiles conformally covered by Li₄Ti₅O₁₂ nanocrystal are rationally designed and synthesized for lithium ion batteries. The efficient two‐step synthesis involves the growth of ultrathin TiO₂ nanosheets on carbon textiles, and subsequent conversion into spinel Li₄Ti₅O₁₂ through chemical lithiation. Importantly, this novel approach is simple and general, and it is used to successfully produce LiMn₂O₄/carbon composites textiles, one of the leading cathode materials for lithium ion batteries. The resulting 3D textile electrode, with various advantages including the direct electronic pathway to current collector, the easy access of electrolyte ions, the reduced Li⁺/e^? diffusion length, delivers excellent rate capability and good cyclic stability over the Li‐ion batteries of conventional configurations.     

A Temperature‐Responsive Electrolyte Endowing Superior Safety Characteristic of Lithium Metal Batteries

Lithium metal batteries (LMBs) have attracted wide attention due to their high energy density. However, flammable organic carbonate electrolytes are associated with severe parasitic reactions and huge safety hazards for LMBs. Herein, a smart temperature‐responsive electrolyte is presented that demonstrates two distinct polymerization behaviors in LMBs. Through an anionic polymerization triggered by lithium metal, this electrolyte forms a favorable polymer protection layer on lithium anodes at ambient temperature, leading to a reversible Li plating/stripping behavior over 2000 h, and dendrite‐free morphology even under a current density of 10 mA cm^?2. On suffering from thermal abuse, this electrolyte can be rapidly transformed from liquid into solid by a thermal free radical polymerization, thus realizing significant improvements in safety performance without internal short‐circuit failures thus achieving safe operation even at a temperature of 150 °C. It is noted that no thermal runway occurs even at an extremely high temperature of 280 °C. It is believed that this study not only offers new valuable insights in interfacial chemistry of electrolytes, but also opens up new avenue to develop safe LMBs.     

Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries

Lithium (Li) metal is an ideal anode material for high energy density batteries. However, the low Coulombic efficiency (CE) and the formation of dendrites during repeated plating and stripping processes have hindered its applications in rechargeable Li metal batteries. The accurate measurement of Li CE is a critical factor to predict the cycle life of Li metal batteries, but the measurement of Li CE is affected by various factors that often lead to conflicting values reported in the literature. Here, several parameters that affect the measurement of Li CE are investigated and a more accurate method of determining Li CE is proposed. It is also found that the capacity used for cycling greatly affects the stabilization cycles and the average CE. A higher cycling capacity leads to faster stabilization of Li anode and a higher average CE. With a proper operating protocol, the average Li CE can be increased from 99.0% to 99.5% at a high capacity of 6 mA h cm^?2 (which is suitable for practical applications) when a high‐concentration ether‐based electrolyte is used.     

Stable Lithium Electrodeposition at Ultra‐High Current Densities Enabled by 3D PMF/Li Composite Anode

Lithium metal batteries (LMBs) are promising candidates for next‐generation energy storage due to their high energy densities on both weight and volume bases. However, LMBs usually undergo uncontrollable lithium deposition, unstable solid electrolyte interphase, and volume expansion, which easily lead to low Coulombic efficiency, poor cycling performance, and even safety hazards, hindering their practical applications for more than forty years. These issues can be further exacerbated if operated at high current densities. Here a stable lithium metal battery enabled by 3D porous poly‐melamine‐formaldehyde (PMF)/Li composite anode is reported. PMF with a large number of polar groups (amine and triazine) can effectively homogenize Li‐ion concentration when these ions approach to the anode surface and thus achieve uniform Li deposition. Moreover, the 3D structured anode can serve as a Li host to mitigate the volume change during Li stripping and plating process. Galvanostatic measurements demonstrate that the 3D composite electrode can achieve high‐lithium Coulombic efficiency of 94.7% at an ultrahigh current density of 10 mA cm^?2 after 50 cycles with low hysteresis and smooth voltage plateaus. When coupled with Li₄Ti₅O₁₂, half‐cells show enhanced rate capabilities and Coulombic efficiencies, opening great opportunities for high‐energy batteries.     

Highly Stable Operation of Lithium Metal Batteries Enabled by the Formation of a Transient High‐Concentration Electrolyte Layer

Lithium (Li) metal has been extensively investigated as an anode for rechargeable battery applications due to its ultrahigh theoretical specific capacity and the lowest redox potential. However, significant challenges including dendrite growth and low Coulombic efficiency are still hindering the practical applications of rechargeable Li metal batteries. It is demonstrated that long‐term cycling of Li metal batteries can be realized by the formation of a transient high‐concentration electrolyte layer near the surface of Li metal anode during high rate discharge process. The highly concentrated Li⁺ ions in this transient layer will immediately be solvated by the available solvent molecules and facilitate the formation of a stable and flexible solid electrolyte interphase (SEI) layer composed of a poly(ethylene carbonate) framework integrated with other organic/inorganic lithium salts. This SEI layer largely suppresses the corrosion of Li metal anode attacked by free organic solvents and enables the long‐term operation of Li metal batteries. The fundamental findings in this work provide a new direction for the development of Li metal batteries that could be operated at high current densities for a wide range of applications.