Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries

Secondary batteries based on metal anodes (e.g., Li, Na, Mg, Zn, and Al) are among the most sought‐after candidates for next‐generation mobile and stationary storage systems because they are able to store a larger amount of energy per unit mass or volume. However, unstable electrodeposition and uncontrolled interfacial reactions occuring in liquid electrolytes cause unsatisfying cell performance and potential safety concerns for the commercial application of these metal anodes. Solid‐state electrolytes (SSEs) having a higher modulus are considered capable of inhibiting difficulties associated with the anodes and may enable building of safe all‐solid‐state metal batteries, yet several challenges, such as insufficient room‐temperature ionic conductivity and poor interfacial stability between the electrode and the electrolyte, hinder the large‐scale development of such batteries. Here, research and development of SSEs including inorganic ceramics, organic solid polymers, and organic–inorganic hybrid/composite materials for metal‐based batteries are reviewed. The comparison of different types of electrolytes is discussed in detail, in the context of electrochemical energy storage applications. Then, the focus of this study is on recent advances in a range of attractive and innovative battery chemistries and technologies that are enabled by SSEs. Finally, the challenges and future perspectives are outlined to foresee the development of SSEs.     

Building Lithiophilic Ion‐Conduction Highways on Garnet‐Type Solid‐State Li+ Conductors

The integration of highly conductive solid‐state electrolytes (SSEs) into solid‐state cells is still a challenge mainly due to the high impedance existing at the electrolyte/electrode interface. Although solid‐state garnet‐based batteries have been successfully assembled with the assistance of an intermediate layer between the garnet and the Li metal anode, the slow discharging/charging rates of the batteries inhibits practical applications, which require much higher power densities. Here, a crystalline sulfonated‐covalent organic framework (COF) thin layer is grown on the garnet surface via a simple solution process. It not only significantly improves the lithiophilicity of garnet electrolytes via the lithiation of the COF layer with molten Li, but also creates effective Li⁺ diffusion “highways” between the garnet and the Li metal anode. As a result, the interfacial impedance of symmetric solid‐state Li cells is significantly decreased and the cells can be operated at high current densities up to 3 mA cm^?2, which is difficult to achieve with current interfacial modification technologies for SSEs. The solid‐state Li‐ion batteries using LiFePO₄ cathodes, Li anodes, and COF‐modified garnet electrolytes thus exhibit a significantly improved rate capability.     

Reversible Short‐Circuit Behaviors in Garnet‐Based Solid‐State Batteries

Garnet‐based solid‐state electrolytes (SSEs) are attractive for solid‐state lithium metal batteries due to their wide electrochemical window, high conductivity, and excellent stability against lithium metal. However, the risk of short‐circuit encumbers the cycle life and capacity of garnet‐based solid‐state batteries without clear reason or mechanism. Here, reversible short‐circuit behavior in the garnet‐based solid‐state batteries, which differs from the short‐circuit in liquid cells, is reported for the first time. In situ neutron depth profiling is adopted to quantitatively measure Li transport, which helps forecast and confirm the reversible nature of the short‐circuit in garnet‐based batteries. A real‐time Li accumulation monitoring system of NMC//CNT/garnet/Li cell is designed to reveal the Li dendrite formation mechanism. The voltage drops of the CNT monitoring electrode during the charging process indicate the formation of Li dendrites inside the garnet bulk, while the smooth voltage profile during the discharging process demonstrates the disappearance of the short‐circuit. This is the first confirmation of short‐circuit behavior that provides clarification of the Li dendrite formation mechanism in garnet‐based solid‐state batteries, which is shown to be a reversible process caused by the low ionic conductivity and non‐negligible electronic conductivity of garnet SSEs.     

Design Strategies,Practical Considerations,and New Solution Processes of Sulfide Solid Electrolytes for All‐Solid‐State Batteries

Owing to the ever‐increasing safety concerns about conventional lithium‐ion batteries, whose applications have expanded to include electric vehicles and grid‐scale energy storage, batteries with solidified electrolytes that utilize nonflammable inorganic materials are attracting considerable attention. In particular, owing to their superionic conductivities (as high as ≈10^?2 S cm^?1) and deformability, sulfide materials as the solid electrolytes (SEs) are considered the enabling material for high‐energy bulk‐type all‐solid‐state batteries. Herein the authors provide a brief review on recent progress in sulfide Li‐ and Na‐ion SEs for all‐solid‐state batteries. After the basic principles in designing SEs are considered, the experimental exploration of multicomponent systems and ab initio calculations that accelerate the search for stronger candidates are discussed. Next, other issues and challenges that are critical for practical applications, such as instability in air, electrochemical stability, and compatibility with active materials, are discussed. Then, an emerging progress in liquid‐phase synthesis and solution process of SEs and its relevant prospects in ensuring intimate ionic contacts and fabricating sheet‐type electrodes is highlighted. Finally, an outlook on the future research directions for all‐solid‐state batteries employing sulfide superionic conductors is provided.     

A Versatile Sn‐Substituted Argyrodite Sulfide Electrolyte for All‐Solid‐State Li Metal Batteries

Sulfide‐based solid‐state electrolytes (SSEs) for all‐solid‐state Li metal batteries (ASSLMBs) are attracting significant attention due to their high ionic conductivity, inherently soft properties, and decent mechanical strength. However, the poor incompatibility with Li metal and air sensitivity have hindered their application. Herein, the Sn (IV) substitution for P (V) in argyrodite sulfide Li₆PS₅I (LPSI) SSEs is reported, in the preparation of novel LPSI‐xSn SSEs (where x is the Sn substitution percentage). Appropriate aliovalent element substitutions with larger atomic radius (R_<Sn> > R_<P>) provides the optimized LPSI‐20Sn electrolyte with a 125 times higher ionic conductivity compared to that of the LPSI electrolyte. The high ionic conductivity of LPSI‐20Sn enables the rich I‐containing electrolyte to serve as a stabilized interlayer against Li metal in sulfide‐based ASSLMBs with outstanding cycling stability and rate capability. Most importantly, benefiting from the strong Sn–S bonding in Sn‐substituted electrolytes, the LPSI‐20Sn electrolyte shows excellent structural stability and improved air stability after exposure to O₂ and moisture. The versatile Sn substitution in argyrodite LPSI electrolytes is believed to provide a new and effective strategy to achieve Li metal‐compatible and air‐stable sulfide‐based SSEs for large‐scale applications.     

Universal Soldering of Lithium and Sodium Alloys on Various Substrates for Batteries

The high theoretical specific capacity of lithium (Li) metal and the nonflammability of solid‐state electrolytes (SSEs) make the solid‐state Li metal battery a promising option to develop safe batteries with high energy density. To make the switch from liquid to solid‐state electrolyte, the high interfacial resistance resulting from the poor solid–solid contacts between Li metal and SSEs needs to be addressed. Herein, a one‐step soldering technique to quickly coat molten Li onto different substrates including metals, ceramics, and polymers is presented. It is deduced that the surface energy and viscosity of the molten Li can be tuned by adding alloy elements, which improves the wettability against various substrates. When soldered onto the surface of garnet‐based SSEs, the Li alloys exhibit significantly improved contact, which leads to an interface resistance as low as ≈7 Ω cm². While cycling under high loads, the newly plated Li still maintains tight contact with the garnet surface and demonstrates excellent electrochemical stability. Several Li binary alloys as well as sodium (Na) binary alloys are successfully tested on various substrates to demonstrate the versatility of this soldering technique for potential battery applications.     

Unraveling the Intra and Intercycle Interfacial Evolution of Li6PS5Cl‐Based All‐Solid‐State Lithium Batteries

High‐performance rechargeable all‐solid‐state lithium metal batteries with high energy density and enhanced safety are attractive for applications like portable electronic devices and electric vehicles. Among the various solid electrolytes, argyrodite Li₆PS₅Cl with high ionic conductivity and easy processability is of great interest. However, the low interface compatibility between sulfide solid electrolytes and high capacity cathodes like nickel‐rich layered oxides requires many thorny issues to be resolved, such as the space charge layer (SCL) and interfacial reactions. In this work, in situ electrochemical impedance spectroscopy and in situ Raman spectroscopy measurements are performed to monitor the detailed interface evolutions in a LiNi_0.8Co_0.1Mn_0.1O₂ (NCM)/Li₆PS₅Cl/Li cell. Combining with ex situ characterizations including scanning electron microscopy and X‐ray photoelectron spectroscopy, the evolution of the SCL and the chemical bond vibration at NCM/Li₆PS₅Cl interface during the early cycles is elaborated. It is found that the Li⁺ ion migration, which varies with the potential change, is a very significant cause of these interface behaviors. For the long‐term cycling, the SCL, interfacial reactions, lithium dendrites, and chemo‐mechanical failure have an integrated effect on interfaces, further deteriorating the interfacial structure and electrochemical performance. This research provides a new insight on intra and intercycle interfacial evolution of solid‐state batteries.     

Dynamic Visualization of Cathode/Electrolyte Evolution in Quasi‐Solid‐State Lithium Batteries

Solid‐state lithium–sulfur batteries (SSLSBs) are highly appealing for electrochemical energy devices because of their promising theoretical energy density. An intensive acquaintance of SSLS interfacial behavior is of importance in gaining fundamental knowledge of working/failure mechanisms and clarifying further optimized design of advanced batteries. Herein, a direct visualization of the evolution of both component and structure is present inside a working SSLSB. In situ Raman spectroscopy clearly sheds light on the potential‐dependent evolution of sulfur speciation via subtly fabricating the electrochemical cell. Moreover, the real‐time optical microscopic views show that the irreversible structure deformation of solid‐state electrolytes (SSEs), which results from the decomposition of dissolved polysulfides (PSs) and gas generation inside the SSE, directly causes the fracture of sulfur cathode with the cycling times increasing. Furthermore, by an atomic force microscopy study, the evolving structure and dynamic behavior of SSEs are directly captured at the nano/microscale and further elucidate the PS shuttling determining the mechanism stability of electrolyte. This work provides a straightforward monitoring of the compositional and morphological evolution, which contributes one to exploring the failure mechanisms and interfacial reactions for the cell performance enhancement.     

All‐Solid‐State Printed Bipolar Li–S Batteries

Despite their potential advantages over currently widespread lithium‐ion batteries, lithium–sulfur (Li–S) batteries are not yet in practical use. Here, for the first time bipolar all‐solid‐state Li–S batteries (ASSLSBs) are demonstrated that exhibit exceptional safety, flexibility, and aesthetics. The bipolar ASSLSBs are fabricated through a solvent‐drying‐free, ultraviolet curing‐assisted stepwise printing process at ambient conditions, without (high‐temperature/high‐pressure) sintering steps that are required for inorganic electrolyte‐based all‐solid‐state batteries. Two thermodynamically immiscible and nonflammable gel electrolytes based on ethyl methyl sulfone (EMS) and tetraethylene glycol dimethyl ether (TEGDME) are used to address longstanding concerns regarding the grain boundary resistance of conventional inorganic solid electrolytes, as well as the polysulfide shuttle effect in Li–S batteries. The EMS gel electrolytes embedded in the sulfur cathodes facilitate sulfur utilization, while the TEGDME gel composite electrolytes serve as polysulfide‐repelling separator membranes. Benefiting from the well‐designed cell components and printing‐driven facile processability, the resulting bipolar ASSLSBs exhibit unforeseen advancements in bipolar cell configuration, safety, foldability, and form factors, which lie far beyond those achievable with conventional Li–S battery technologies.     

Highly Tough,Li‐Metal Compatible Organic–Inorganic Double‐Network Solvate Ionogel

Ionogels are considered promising electrolytes for safe lithium‐ion batteries (LIBs) because of their low flammability, good thermal stability, and wide electrochemical stability window. Conventional ionic liquid‐based ionogels, however, face two main challenges; poor mechanical property and low Li‐ion transfer number. In this work, a novel solvate ionogel electrolyte (SIGE) based on an organic–inorganic double network (DN) is designed and fabricated through nonhydrolytic sol–gel reaction and in situ polymerization processes. The unprecedented SIGE possesses high toughness (bearing the deformation under the pressure of 80 MPa without damage), high Li‐ion transfer number of 0.43, and excellent Li‐metal compatibility. As expected, the LiFePO₄/Li cell using the newly developed SIGE delivers a high capacity retention of 95.2% over 500 cycles, and the average Coulombic efficiency is as high as 99.8%. Moreover, the Ni‐rich LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811)/Li cell based on the modified SIGE achieves a high Coulombic efficiency of 99.4%, which outperforms previous solid/quasi‐solid‐state NCM811‐based LIBs. Interestingly, the SIGE‐based pouch cells are workable under extreme conditions (e.g., severely deforming or clipping into segments). In terms of those unusual features, the as‐obtained SIGE holds great promise for next‐generation flexible and safe energy‐storage devices.     

Solid-State Li–Metal Batteries: Challenges and Horizons of Oxide and Sulfide Solid Electrolytes and Their Interfaces

The introduction of new, safe, and reliable solid-electrolyte chemistries and technologies can potentially overcome the challenges facing their liquid counterparts while widening the breadth of possible applications. Through tech-historic evolution and rationally analyzing the transition from liquid-based Li-ion batteries (LIBs) to all-solid-state Li-metal batteries (ASSLBs), a roadmap for the development of a successful oxide and sulfide-based ASSLB focusing on interfacial challenges is introduced, while accounting for five parameters: energy density, power density, longterm stability, processing, and safety. First taking a strategic approach, this review dismantles the ASSLB into its three major components and discusses the most promising solid electrolytes and their most advantageous pairing options with oxide cathode materials and the Li metal anode. A thorough analysis of the chemical, electrochemical, and mechanical properties of the two most promising and investigated classes of inorganic solid electrolytes, namely oxides and sulfides, is presented. Next, the overriding challenges associated with the pairing of the solid electrolyte with oxide-based cathodes and a Li-metal anode, leading to limited performance for solid-state batteries are extensively addressed and possible strategies to mitigate these issues are presented. Finally, future perspectives, guidelines, and selective interface engineering strategies toward the resolution of these challenges are analyzed and discussed.     

Revealing the Short‐Circuiting Mechanism of Garnet‐Based Solid‐State Electrolyte

Garnet‐type solid‐state electrolytes (SSEs) have been widely studied as a promising candidate for Li metal batteries. Despite the common belief that inorganic SSEs can prevent dendrite propagation, garnet SSEs suffer from relatively low critical current density (CCD) at which the SSEs are abruptly short‐circuited by Li dendrites. In this study, the short‐circuiting mechanism of garnet Li₇La_2.75Ca_0.25Zr_1.75Nb_0.25O₁₂ (LLCZN) is investigated. It is found that instead of propagating uniaxially from one electrode to other in a dendritic form, metallic lithium is formed within the SSE. This can be attributed to the fact that electrons combine with Li ions at the grain boundary, which exhibits relatively high electronic conductivity, and then reduce Li⁺ to Li⁰ to cause short circuits. In order to reduce the electronic conductivity at the grain boundary, a thin layer of LiAlO₂ is coated on the grain surface of LLCZN, which results in an improved CCD value. It is also found that under higher external voltages, the electronic conductivity of SSE becomes more significant, which is believed to be the origin of CCD. These findings not only shed light on the short‐circuiting mechanism of garnet‐type SSEs but also offer a novel perspective and useful guidance on their designs and modifications.     

Perovskite Membranes with Vertically Aligned Microchannels for All‐Solid‐State Lithium Batteries

Perovskite‐type solid‐state electrolytes exhibit great potential for the development of all‐solid‐state lithium batteries due to their high Li‐ion conductivity (approaching 10^?3 S cm^?1), wide potential window, and excellent thermal/chemical stability. However, the large solid–solid interfacial resistance between perovskite electrolytes and electrode materials is still a great challenge that hinders the development of high‐performance all‐solid‐state lithium batteries. In this work, a perovskite‐type Li_0.34La_0.51TiO₃ (LLTO) membrane with vertically aligned microchannels is constructed by a phase‐inversion method. The 3D vertically aligned microchannel framework membrane enables more effective Li‐ion transport between the cathode and solid‐state electrolyte than a planar LLTO membrane. A significant decrease in the perovskite/cathode interfacial resistance, from 853 to 133 Ω cm², is observed. It is also demonstrated that full cells utilizing LLTO with vertically aligned microchannels as the electrolyte exhibit a high specific capacity and improved rate performance.     

Computation‐Guided Design of LiTaSiO5, a New Lithium Ionic Conductor with Sphene Structure

The development of all‐solid‐state Li‐ion batteries requires solid electrolyte materials with many desired properties, such as ionic conductivity, chemical and electrochemical stability, and mechanical durability. Computation‐guided materials design techniques are advantageous in designing and identifying new solid electrolytes that can simultaneously meet these requirements. In this joint computational and experimental study, a new family of fast lithium ion conductors, namely, LiTaSiO₅ with sphene structure, are successfully identified, synthesized, and demonstrated using a novel computational design strategy. First‐principles computation predicts that Zr‐doped LiTaSiO₅ sphene materials have fast Li diffusion, good phase stability, and poor electronic conductivity, which are ideal for solid electrolytes. Experiments confirm that Zr‐doped LiTaSiO₅ sphene structure indeed exhibits encouraging ionic conductivity. The lithium diffusion mechanisms in this material are also investigated, indicating the sphene materials are 3D conductors with facile 1D diffusion along the [101] direction and additional cross‐channel migration. This study demonstrates a novel design strategy of activating fast Li ionic diffusion in lithium sphenes, a new materials family of superionic conductors.     

Nanocomposite Ionogel Electrolytes for Solid‐State Rechargeable Batteries

Ionogels composed of ionic liquids and gelling solid matrices offer several advantages as solid‐state electrolytes for rechargeable batteries, including safety under diverse operating conditions, favorable electrochemical and thermal properties, and wide processing compatibility. Among gelling solid matrices, nanoscale materials have shown particular promise due to their ability to concurrently enhance ionogel mechanical properties, thermal stability, ionic conductivity, and electrochemical stability. These beneficial attributes suggest that ionogel electrolytes are not only of interest for incumbent lithium‐ion batteries but also for next‐generation rechargeable battery technologies. Herein, recent advances in nanocomposite ionogel electrolytes are discussed to highlight their advantages as solid‐state electrolytes for rechargeable batteries. By exploring a range of different nanoscale gelling solid matrices, relationships between nanoscale material structure and ionogel properties are developed. Furthermore, key research challenges are delineated to help guide and accelerate the incorporation of nanocomposite ionogel electrolytes in high‐performance solid‐state rechargeable batteries.     

Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid Electrolytes

The electrochemical stability window of solid electrolyte is overestimated by the conventional experimental method using a Li/electrolyte/inert metal semiblocking electrode because of the limited contact area between solid electrolyte and inert metal. Since the battery is cycled in the overestimated stability window, the decomposition of the solid electrolyte at the interfaces occurs but has been ignored as a cause for high interfacial resistances in previous studies, limiting the performance improvement of the bulk‐type solid‐state battery despite the decades of research efforts. Thus, there is an urgent need to identify the intrinsic stability window of the solid electrolyte. The thermodynamic electrochemical stability window of solid electrolytes is calculated using first principles computation methods, and an experimental method is developed to measure the intrinsic electrochemical stability window of solid electrolytes using a Li/electrolyte/electrolyte‐carbon cell. The most promising solid electrolytes, Li₁₀GeP₂S₁₂ and cubic Li‐garnet Li₇La₃Zr₂O₁₂, are chosen as the model materials for sulfide and oxide solid electrolytes, respectively. The results provide valuable insights to address the most challenging problems of the interfacial stability and resistance in high‐performance solid‐state batteries.     

A Lithium Amide‐Borohydride Solid‐State Electrolyte with Lithium‐Ion Conductivities Comparable to Liquid Electrolytes

High ionic conductivity of up to 6.4 × 10^?3 S cm^?1 near room temperature (40 °C) in lithium amide‐borohydrides is reported, comparable to values of liquid organic electrolytes commonly employed in lithium‐ion batteries. Density functional theory is applied coupled with X‐ray diffraction, calorimetry, and nuclear magnetic resonance experiments to shed light on the conduction mechanism. A Li₄Ti₅O₁₂ half‐cell battery incorporating the lithium amide‐borohydride electrolyte exhibits good rate performance up to 3.5 mA cm^?2 (5 C) and stable cycling over 400 cycles at 1 C at 40 °C, indicating high bulk and interfacial stability. The results demonstrate the potential of lithium amide‐borohydrides as solid‐state electrolytes for high‐power lithium‐ion batteries.     

Stack Pressure Considerations for Room‐Temperature All‐Solid‐State Lithium Metal Batteries

All‐solid‐state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendrit growth at room temperature. While cell parameters such as current density, electrolyte porosity, and interfacial properties have been investigated, mechanical properties of lithium metal and the role of applied stack pressure on the shorting behavior are still poorly understood. Here, failure mechanisms of lithium metal are investigated in all‐solid‐state batteries as a function of stack pressure, and in situ characterization of the interfacial and morphological properties of the buried lithium is conducted in solid electrolytes. It is found that a low stack pressure of 5 MPa allows reliable plating and stripping in a lithium symmetric cell for more than 1000 h, and a Li | Li₆PS₅Cl | LiNi_0.80Co_0.15Al_0.05O₂ full cell, plating more than 4 µm of lithium per charge, is able to cycle over 200 cycles at room temperature. These results suggest the possibility of enabling the lithium metal anode in all‐solid‐state batteries at reasonable stack pressures.     

Recent Advances in Non‐Aqueous Electrolyte for Rechargeable Li–O2 Batteries

The rechargeable Li–O₂ battery has attracted much attention over the past decades owing to its overwhelming advantage in theoretical specific energy density compared to state‐of‐the‐art Li‐ion batteries. Practical application requires non‐aqueous Li–O₂ batteries to stably obtain high reversible capacity, which highly depends on a suitable electrolyte system. Up to now, some critical challenges remain in developing desirable non‐aqueous electrolytes for Li–O₂ batteries. Herein, we will review the current status and challenges in non‐aqueous liquid electrolytes, ionic liquid electrolytes and solid‐state electrolytes of Li–O₂ batteries, as well as the perspectives on these issues and future development.     

Ethers Illume Sodium‐Based Battery Chemistry: Uniqueness,Surprise, and Challenges

Sodium‐ion batteries (SIBs) have the potential to be practically applied in large‐scale energy storage markets. The rapid progress of SIBs research is primarily focused on electrodes, while electrolytes attract less attention. Indeed, the improvement of electrode performance is arguably correlated with the electrolyte optimization. In conventional lithium‐ion batteries (LIBs), ether‐based electrolytes are historically less practical owing to the insufficient passivation of both anodes and cathodes. As an important class of aprotic electrolytes, ethers have revived with the emerging lithium‐sulfur and lithium‐oxygen batteries in recent years, and are even booming in the wave of SIBs. Ether‐based electrolytes are unique to enabling these new battery chemistries in terms of producing stable ternary graphite intercalation compounds, modifying anode solid electrolyte interphases, reducing the solubility of intermediates, and decreasing polarization. Better still, ether‐based electrolytes are compatible with specific inorganic cathodes and could catalyze the assembly of full SIBs prototypes. This Research News article aims to summarize the recent critical reports on ether‐based electrolytes in sodium‐based batteries, to unveil the uniqueness of ether‐based electrolytes to advancing diverse electrode materials, and to shed light on the viability and challenges of ether‐based electrolytes in future sodium‐based battery chemistries.