Reliability of Small Molecule Organic Photovoltaics with Electron‐Filtering Compound Buffer Layers

Electron‐filtering compound buffer layers (EF‐CBLs) improve charge extraction in organic photovoltaic cells (OPVs) by blending an electron‐conducting fullerene with a wide energy gap exciton‐blocking molecule. It is found that devices with EF‐CBLs with high glass transition temperatures and a low crystallization rate produce highly stable morphologies and devices. The most stable OPVs employ 1:1 2,2′,2″‐(1,3,5‐benzenetriyl tris‐[1‐phenyl‐1H‐benzimidazole] TPBi:C₇₀ buffers that lose <20% of their initial power conversion efficiency of 6.6 ± 0.6% after 2700 h under continuous simulated AM1.5G illumination, and show no significant degradation after 100 days of outdoor aging. When exposed to 100‐sun (100 kW m^?2) concentrated solar illumination for 5 h, their power conversion efficiencies decrease by <8%. Moreover, it is found that the reliability of the devices employing stable EF‐CBLs has either reduced or no dependence on operating temperature up to 130 °C compared with BPhen:C₆₀ devices whose fill factors show thermally activated degradation. The robustness of TPBi:C₇₀ devices under extreme aging conditions including outdoor exposure, high temperature, and concentrated illumination is promising for the future of OPV as a stable solar cell technology.     

Solar Rechargeable Batteries Based on Lead–Organohalide Electrolyte

A dye‐sensitized solar cell (DSC) with in situ energy storage capacity is demonstrated using a lead–organohalide electrolyte CH₃NH₃I·PbCl₂ (LOC) to replace the conventional I^?/I₃^? electrolyte. The coupling of lead and iodine in one electrolyte creates a dual‐function rechargeable solar battery that combines the working processes of photoelectrochemical cells with electrochemical batteries. Optimization of the H⁺ concentration in the electrolyte leads to increased photocharging efficiency and storage. The power conversion efficiency of the LOC–DSC is 8.6% under one sun illumination (AM 1.5, 100 mW cm^?2) as a DSC. When operating as a battery, Faraday efficiency can be achieved as high as 81.5% using a bromide‐based CH₃NH₃Br·PbBr₂ (LOB) electrolyte in a DSC configuration. This new cell design suggests a means of combining photovoltaic energy conversion and electrical energy storage.     

Metal Halide Perovskites for Solar‐to‐Chemical Fuel Conversion

This review article presents and discusses the recent progress made in the stabilization, protection, improvement, and design of halide perovskite‐based photocatalysts, photoelectrodes, and devices for solar‐to‐chemical fuel conversion. With the target of water splitting, hydrogen iodide splitting, and CO₂ reduction reactions, the strategies established for halide perovskites used in photocatalytic particle‐suspension systems, photoelectrode thin‐film systems, and photovoltaic‐(photo)electrocatalysis tandem systems are organized and introduced. Moreover, recent achievements in discovering new and stable halide perovskite materials, developing protective and functional shells and layers, designing proper reaction solution systems, and tandem device configurations are emphasized and discussed. Perspectives on the future design of halide perovskite materials and devices for solar‐to‐chemical fuel conversion are provided. This review may serve as a guide for researchers interested in utilizing halide perovskite materials for solar‐to‐chemical fuel conversion.     

MoS2‐Based All‐Purpose Fibrous Electrode and Self‐Powering Energy Fiber for Efficient Energy Harvesting and Storage

Here an all‐purpose fibrous electrode based on MoS₂ is demonstrated, which can be employed for versatile energy harvesting and storage applications. In this coaxial electrode, ultrathin MoS₂ nanofilms are grown on TiO₂ nanoparticles coated carbon fiber. The high electrochemical activity of MoS₂ and good conductivity of carbon fiber synergistically lead to the remarkable performances of this novel composite electrode in fibrous dye‐sensitized solar cells (showing a record‐breaking conversion efficiency of 9.5%) and high‐capacity fibrous supercapacitors. Furthermore, a self‐powering energy fiber is fabricated by combining a fibrous dye‐sensitized solar cell and a fibrous supercapacitor into a single device, showing very fast charging capability (charging in 7 s under AM1.5G solar illumination) and an overall photochemical‐electricity energy conversion efficiency as high as 1.8%. In addition, this wire‐shaped electrode can also be used for fibrous Li‐ion batteries and electrocatalytic hydrogen evolution reactions. These applications indicate that the MoS₂‐based all‐purpose fibrous electrode has great potential for the construction of high‐performance flexible and wearable energy devices.     

Solar‐Light‐Driven CO2 Reduction by CH4 on Silica‐Cluster‐Modified Ni Nanocrystals with a High Solar‐to‐Fuel Efficiency and Excellent Durability

Catalytic CO₂ reforming of CH₄ (CRM) to produce syngas (H₂ and CO) provides a promising approach to reducing global CO₂ emissions and the extensive utilization of natural gas resources. However, the rapid deactivation of the reported catalysts due to severe carbon deposition at high reaction temperatures and the large energy consumption of the process hinder its industrial application. Here, a method for almost completely preventing carbon deposition is reported by modifying the surface of Ni nanocrystals with silica clusters. The obtained catalyst exhibits excellent durability for CRM with almost no carbon deposition and deactivation after reaction for 700 h. Very importantly, it is found that CRM on the catalyst can be driven by focused solar light, thus providing a promising new approach to the conversion of renewable solar energy to fuel due to the highly endothermic characteristics of CRM. The reaction yields high production rates of H₂ and CO (17.1 and 19.9 mmol min^?1 g^?1, respectively) with a very high solar‐to‐fuel efficiency (η, 12.5%). Even under focused IR irradiation with a wavelength above 830 nm, the η of the catalyst remains as high as 3.1%. The highly efficient catalytic activity arises from the efficient solar‐light‐driven thermocatalytic CRM enhanced by a novel photoactivation effect.     

Solution‐Processed TiO2 Nanoparticles as the Window Layer for CuIn(S,Se)2 Devices

As a wide‐bandgap semiconductor, titanium dioxide (TiO₂) with a porous structure has proven useful in dye‐sensitized solar cells, but its application in low‐cost, high‐efficiency inorganic photovoltaic devices based on materials such as Cu(InGa)Se₂ or Cu₂ZnSnS₄ is limited. Here, a thin film made from solution‐processed TiO₂ nanocrystals is demonstrated as an alternative to intrinsic zinc oxide (i‐ZnO) as the window layer of CuInS_xSe_1?x solar cells. The as‐synthesized, well‐dispersed, 6 nm TiO₂ nanocrystals are assembled into thin films with controllable thicknesses of 40, 80, and 160 nm. The TiO₂ nanocrystal films with thicknesses of 40 and 80 nm exhibit conversion efficiencies (6.2% and 6.33%, respectively) that are comparable to that of a layer of the typical sputtered i‐ZnO (6.42%). The conversion efficiency of the devices with a TiO₂ thickness of 160 nm decreases to 2.2%, owing to the large series resistance. A 9‐hour reaction time leads to aggregated nanoparticles with a much‐lower efficiency (2%) than that of the well‐dispersed TiO₂ nanoparticles prepared using a 15‐hour reaction time. Under optimized conditions, the champion TiO₂ nanocrystal‐film‐based device shows even higher efficiency (9.2%) than a control device employing a typical i‐ZnO film (8.6%).     

(040)‐Crystal Facet Engineering of BiVO4 Plate Photoanodes for Solar Fuel Production

A (040)‐crystal facet engineered BiVO₄ ((040)‐BVO) photoanode is investigated for solar fuel production. The (040)‐BVO photoanode is favorable for improved charge carrier mobility and high photocatalytic active sites for solar light energy conversion. This crystal facet design of the (040)‐BVO photoanode leads to an increase in the energy conversion efficiency for solar fuel production and an enhancement of the oxygen evolution rate. The photocurrent density of the (040)‐BVO photoanode is determined to be 0.94 mA cm^?2 under AM 1.5 G illumination and produces 42.1% of the absorbed photon‐to‐current conversion efficiency at 1.23 V (vs RHE, reversible hydrogen electrode). The enhanced charge separation efficiency and improved charge injection efficiency driven by (040) facet can produce hydrogen with 0.02 mmol h^?1 at 1.23 V. The correlation between the (040)‐BVO photoanode and the solar fuel production is investigated. The results provide a promising approach for the development of solar fuel production using a BiVO₄ photoanode.     

Efficiency Enhancement of Organic Solar Cells Using Hydrophobic Antireflective Inverted Moth‐Eye Nanopatterned PDMS Films

Poly‐dimethylsiloxane (PDMS) films with 2D periodic inverted moth‐eye nanopatterns on one surface are implemented as antireflection (AR) layers on a glass substrate for efficient light capture in encapsulated organic solar cells (OSCs). The inverted moth‐eye nanopatterned PDMS (IMN PDMS) films are fabricated by a soft imprint lithographic method using conical subwavelength grating patterns formed by laser interference lithography/dry etching. Their optical characteristics, together with theoretical analysis using rigorous coupled‐wave analysis simulation, and wetting behaviors are investigated. For a period of 380 nm, IMN PDMS films laminated on glass substrates exhibit a hydrophobic surface with a water contact angle (θ_CA) of ≈120° and solar weighted transmittance (SWT) of ≈94.2%, both significantly higher than those (θ_CA≈ 36° and SWT ≈ 90.3%) of bare glass substrates. By employing IMN PDMS films with a period of 380 nm on glass substrates for OSCs, an enhanced power conversion efficiency (PCE) of 6.19% is obtained mainly due to the increased short‐circuit current density (J_sc) of 19.74 mA cm^‐2 compared to the OSCs with the bare glass substrates (PCE = 5.16% and J_sc = 17.25 mA cm^‐2). For the OSCs, the device stability is also studied.     

Modeling Thermochemical Solar‐to‐Fuel Conversion: CALPHAD for Thermodynamic Assessment Studies of Perovskites,Exemplified for (La,Sr)MnO3

Two‐step solar thermochemical fuel production has the potential to reduce global greenhouse gas emissions and replace fossil fuels. The success of the technology relies on the development of materials with high thermochemical efficiency. Perovskites with the general structure ABO₃ have received much attention recently due to impressive fuel productivity and their amenability of substituting and doping both A‐ and B‐site. Despite the potential of perovskites for solar‐to‐fuel conversion, literature on their solar thermochemical efficiency is scarce and finding the best chemical composition and optimum operation conditions is unknown. For this purpose, this study suggests to use Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD) data libraries to access the relevant thermodynamic properties of perovskites. This work demonstrates the usefulness of employing CALPHAD data by a full thermodynamic study of the model case compositions of La_1–xSr_xMnO_3–δ. This study uses data on oxygen‐nonstoichiometry and heat capacity in the temperature range of 1073–1873 K relevant for solar‐to‐fuel. Unlike earlier thermodynamic assessments of perovskites that rely on a single literature source and a limited temperature range, the CALPHAD approach takes all available data in literature into consideration. Thermochemical equilibrium models of fuel yields are accompanied by validations toward experimental results in literature, and this study highlights the effects of strontium doping level on the efficiency.     

A High Efficiency Electrodeposited Cu2ZnSnS4 Solar Cell

High‐performance Cu₂ZnSnS₄ photovoltaic devices are demonstrated using electrodeposition of metal stacks and annealing of a CuZnSn precursor in a sulfur atmosphere. A champion electroplated Cu₂ZnSnS₄ solar cell achieves a power conversion efficiency of 7.3%, which is a record efficiency for electrodeposited Cu₂ZnSnS₄ solar devices. The device performance points to electrodeposition and annealing as a low‐cost and viable approach to earth‐abundant solar cell fabrication.     

Challenges and opportunities for hydrogen production from microalgae

The global population is predicted to increase from ~7.3 billion to over 9 billion people by 2050. Together with rising economic growth, this is forecast to result in a 50% increase in fuel demand, which will have to be met while reducing carbon dioxide (CO₂) emissions by 50–80% to maintain social, political, energy and climate security. This tension between rising fuel demand and the requirement for rapid global decarbonization highlights the need to fast‐track the coordinated development and deployment of efficient cost‐effective renewable technologies for the production of CO₂ neutral energy. Currently, only 20% of global energy is provided as electricity, while 80% is provided as fuel. Hydrogen (H₂) is the most advanced CO₂‐free fuel and provides a ‘common’ energy currency as it can be produced via a range of renewable technologies, including photovoltaic (PV), wind, wave and biological systems such as microalgae, to power the next generation of H₂ fuel cells. Microalgae production systems for carbon‐based fuel (oil and ethanol) are now at the demonstration scale. This review focuses on evaluating the potential of microalgal technologies for the commercial production of solar‐driven H₂ from water. It summarizes key global technology drivers, the potential and theoretical limits of microalgal H₂ production systems, emerging strategies to engineer next‐generation systems and how these fit into an evolving H₂ economy.     

Taking Temperature Processing Out of Dye‐Sensitized Solar Cell Fabrication: Fully Laser‐Manufactured Devices

Novel approaches for the fabrication of dye‐sensitized solar cells (DSCs) are reported in which all the main constituent materials are processed by laser radiation. In addition to laser sintering of the nanocrystalline TiO₂ film it is shown that lasers can be successfully utilized for nc‐TiO₂ film patterning, platinization of the counter‐electrode, and efficient gasket sealing. All the mentioned processes are optimized and utilized for the fabrication of the first efficient and durable all‐laser‐based DSCs. Under one sun A.M. 1.5 illumination the power conversion efficiency (PCE) is 5.3% (6.2% unmasked) and also greater than or equal to the PCE of the cell fabricated with the same materials set but processed using conventional procedures (5.2%). These results open up a new scenario for DSC technology, i.e., that of setting up an entire, laser‐based, three‐step DSC pilot production line with tangible advantages in terms of effective processing, automation, large area scalability, and embedded energy.     

Layer‐by‐Layer Solution‐Processed Low‐Bandgap Polymer‐PC61BM Solar Cells with High Efficiency

Polymer solar cells (PSCs) are fabricated without solvent additives using a low‐bandgap polymer, PBDTTT‐C‐T, as the donor and [6,6]‐phenyl‐C61‐butyric‐acid‐methyl‐ester (PC₆₁BM) as the acceptor. Donor‐acceptor blend and layer‐by‐layer (LL) solution process are used to form active layers. Relative to the blend devices, the LL devices exhibit stronger absorption, better vertical phase separation, higher hole and electron mobilities, and better charge extraction at correct electrodes. As a result, after thermal annealing the LL devices exhibit an average power conversion efficiency (PCE) of 6.86%, which is much higher than that of the blend devices (4.31%). The best PCE of the LL devices is 7.13%, which is the highest reported for LL processed PSCs and among the highest reported for PC₆₁BM‐based single‐junction PSCs.     

Highly Efficient Solar‐Driven Carbon Dioxide Reduction on Molybdenum Disulfide Catalyst Using Choline Chloride‐Based Electrolyte

Conversion of CO₂ to energy‐rich chemicals using renewable energy is of much interest to close the anthropogenic carbon cycle. However, the current photoelectrochemical systems are still far from being practically feasible. Here the successful demonstration of a continuous, energy efficient, and scalable solar‐driven CO₂ reduction process based on earth‐abundant molybdenum disulfide (MoS₂) catalyst, which works in synergy with an inexpensive hybrid electrolyte of choline chloride (a common food additive for livestock) and potassium hydroxide (KOH) is reported. The CO₂ saturated hybrid electrolyte utilized in this study also acts as a buffer solution (pH ≈ 7.6) to adjust pH during the reactions. This study reveals that this system can efficiently convert CO₂ to CO with solar‐to‐fuel and catalytic conversion efficiencies of 23% and 83%, respectively. Using density functional theory calculations, a new reaction mechanism in which the water molecules near the MoS₂ cathode act as proton donors to facilitate the CO₂ reduction process by MoS₂ catalyst is proposed. This demonstration of a continuous, cost‐effective, and energy efficient solar driven CO₂ conversion process is a key step toward the industrialization of this technology.     

TiO2 Nanocrystals Synthesized by Laser Pyrolysis for the Up‐Scaling of Efficient Solid‐State Dye‐Sensitized Solar Cells

A crucial issue regarding emerging nanotechnologies remains the up‐scaling of new functional nanostructured materials towards their implementation in high performance applications on a large scale. In this context, we demonstrate high efficiency solid‐state dye‐sensitized solar cells prepared from new porous TiO₂ photoanodes based on laser pyrolysis nanocrystals. This strategy exploits a reduced number of processing steps as well as non‐toxic chemical compounds to demonstrate highly porous TiO₂ films. The possibility to easily tune the TiO₂ nanocrystal physical properties allows us to demonstrate all solid‐state dye‐sensitized devices based on a commercial benchmark materials (organic indoline dye and molecular hole transporter) presenting state‐of‐the‐art performance comparable with reference devices based on a commercial TiO₂ paste. In particular, a drastic improvement in pore infiltration, which is found to balance a relatively lower surface area compared to the reference electrode, is evidenced using laser‐synthesized nanocrystals resulting in an improved short‐circuit current density under full sunlight. Transient photovoltage decay measurements suggest that charge recombination kinetics still limit device performance. However, the proposed strategy emphasizes the potentialities of the laser pyrolysis technique for up‐scaling nanoporous TiO₂ electrodes for various applications, especially for solar energy conversion.     

Highly Efficient Perovskite Solar Cell Photocharging of Lithium Ion Battery Using DC–DC Booster

Solar cells become a viable energy source to charge lithium ion batteries. Here a simple and efficient photocharging design approach is demonstrated, where a promising low cost single junction solar cell such as perovskite solar cell or dye sensitized solar cell efficiently charges a Li₄Ti₅O₁₂‐LiCoO₂ Li‐ion cell using a DC–DC voltage boost converter. The converter boosts the low input voltage of a single junction solar cell to charge a lithium ion cell and offers advantages including maximum power point tracking of solar photovoltaics and overvoltage protection for the lithium ion cell. This is the first demonstration of this technology. This approach leads to the highest reported overall efficiency of 9.36% and average storage efficiency of 77.2% at 0.5 C discharge for a perovskite solar cell‐converter charging. The high efficiency for the perovskite solar cell‐converter charging is attributed to maximum power harvesting along with high power conversion efficiency of the perovskite solar cell and low potential polarization between the charge and discharge voltage plateaus for the Li₄Ti₅O₁₂‐LiCoO₂ Li‐ion cell.     

Charge Transport and Recombination in Low‐Bandgap Bulk Heterojunction Solar Cell using Bis‐adduct Fullerene

Charge transport and recombination are studied for organic solar cells fabricated using blends of polymer poly[(4,4′‐bis(2‐ethylhexyl)dithieno[3,2‐b:2′,3′‐d]silole)‐2,6‐diyl‐alt‐(4,7‐bis(2‐thienyl)‐2,1,3‐benzothiadiazole)‐5,5′‐diyl] (Si‐PCPDTBT) with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (mono‐PCBM) and the bis‐adduct analogue of mono‐PCBM (bis‐PCBM). The photocurrent of Si‐PCPDTBT:bis‐PCBM devices shows a strong square root dependence on the effective applied voltage. From the relationship between the photocurrent and the light intensity, we found that the square‐root dependence of the photocurrent is governed by the mobility‐lifetime (μτ) product of charge carriers while space‐charge field effects are insignificant. The fill factor (FF) and short circuit current density (J_sc) of bis‐PCBM solar cells show a considerable increase with temperature as compared to mono‐PCBM solar cells. SCLC analysis of single carrier devices proofs that the mobility of both electrons and holes is significantly lowered when replacing mono‐PCBM with bis‐PCBM. The increased recombination in Si‐PCPDTBT:bis‐PCBM solar cells is therefore attributed to the low carrier mobilities, as the transient photovoltage measurements show that the carrier lifetime of devices are not significantly altered by using bis‐PCBM instead of mono‐PCBM.     

UV‐Inert ZnTiO3 Electron Selective Layer for Photostable Perovskite Solar Cells

Although planar‐structured perovskite solar cells (PSCs) have power conversion efficiencies exceeding 24%, the poor photostability, especially with ultraviolet irradiance (UV) severely limits commercial application. The most commonly‐used TiO₂ electron selective layer has a strong photocatalytic effect on perovskite/TiO₂ interface when TiO₂ is excited by UV light. Here a UV‐inert ZnTiO₃ is reported as the electron selective layer in planar PSCs. ZnTiO₃ is a perovskite‐structured semiconductor with excellent chemical stability and poor photocatalysis. Solar cells are fabricated with a structure of indium doped tin oxide (ITO)/ZnTiO₃/Cs_0.05FA_0.81MA_0.14PbI_2.55Br_0.45/Sprio‐MeOTAD/Au. The champion device exhibits a stabilized power conversion efficiency of 19.8% with improved photostability. The device holds 90% of its initial efficiency after 100 h of UV soaking (365 nm, 8 mW cm^?2), compared with 55% for TiO₂‐based devices. This work provides a new class of electron selective materials with excellent UV stability in perovskite solar cell applications.     

Conductive and Stable Magnesium Oxide Electron‐Selective Contacts for Efficient Silicon Solar Cells

A high Schottky barrier (>0.65 eV) for electrons is typically found on lightly doped n‐type crystalline (c‐Si) wafers for a variety of contact metals. This behavior is commonly attributed to the Fermi‐level pinning effect and has hindered the development of n‐type c‐Si solar cells, while its p‐type counterparts have been commercialized for several decades, typically utilizing aluminium alloys in full‐area, and more recently, partial‐area rear contact configurations. Here the authors demonstrate a highly conductive and thermally stable electrode composed of a magnesium oxide/aluminium (MgO_x/Al) contact, achieving moderately low resistivity Ohmic contacts on lightly doped n‐type c‐Si. The electrode, functionalized with nanoscale MgO_x films, significantly enhances the performance of n‐type c‐Si solar cells to a power conversion efficiency of 20%, advancing n‐type c‐Si solar cells with full‐area dopant‐free rear contacts to a point of competitiveness with the standard p‐type architecture. The low thermal budget of the cathode formation, its dopant‐free nature, and the simplicity of the device structure enabled by the MgO_x/Al contact open up new possibilities in designing and fabricating low‐cost optoelectronic devices, including solar cells, thin film transistors, or light emitting diodes.