Highly Efficient Materials Assembly Via Electrophoretic Deposition for Electrochemical Energy Conversion and Storage Devices

Featuring pronounced controllability, versatility, and scalability, electrophoretic deposition (EPD) has been proposed as an efficient method for film assembly and electrode/solid electrolyte fabrication in various energy storage/conversion devices including rechargeable batteries, supercapacitors, and fuel cells. High‐quality electrodes and solid electrolytes have been prepared through EPD and exhibit advantageous performances in comparison with those realized with traditional methods. Recent advances in the application of EPD materials in electrochemical energy storage and conversion devices are summarized. In particular, the parameters that influence the efficiency of an EPD process from colloidal preparation to deposition are evaluated with the aim to provide insightful guidance for realizing high‐performance electrochemical energy conversion materials and devices.     

Recent Advances of Mn‐Rich LiFe1‐yMnyPO4 (0.5 ≤ y < 1.0) Cathode Materials for High Energy Density Lithium Ion Batteries

LiMnPO₄ (LMP) is one of the most potential candidates for high energy density (≈700 W h kg^?1) lithium ion batteries (LIBs). However, the intrinsically low electronic conductivity and lithium ion diffusion coefficient of LMP result in its low performance. To overcome these challenges, it is an effective approach to prepare nanometer‐sized Fe‐doping LMP (LFMP) materials through optimization of the preparation routes. Moreover, surface coating can improve the ionic and electronic conductivity, and decrease the interfacial side reactions between the nanometer particles and electrolyte. Thus, a uniform surface coating will lead to a significant enhancement of the electrochemical performance of LFMP. Currently, considerable efforts have been devoted to improving the electrochemical performance of LiFe_1‐y Mn_y PO₄ (0.5 ≤ y < 1.0) and some important progresses have been achieved. Here, a general overview of the structural features, typical electrochemical behavior, delithiation/lithiation mechanisms, and thermodynamic properties of LiFe_1‐y Mn_y PO₄‐based materials is presented. The recent developments achieved in improvement of the electrochemical performances of LiFe_1‐y Mn_y PO₄‐based materials are summarized, including selecting the synthetic methods, nanostructuring, surface coating, optimizing Fe/Mn ratios and particle morphologies, cation/anion doping, and rational designing of LFMP‐based full cells. Finally, the critical issues at present and future development of LiFe_1‐y Mn_y PO₄‐based materials are discussed.     

Transition Metal Sulfides Based on Graphene for Electrochemical Energy Storage

Transition metal sulfides, as an important class of inorganics, can be used as excellent electrode materials for various types of electrochemical energy storage, such as lithium‐ion batteries, sodium‐ion batteries, supercapacitors, and others. Recent works have identified that mixing graphene or graphene derivatives with transition metal sulfides can result in novel composites with better electrochemical performance. This review summarizes the latest advances in transition metal sulfide composites with graphene or graphene derivatives. The synthetic strategies and morphologies of these composites are introduced. The authors then discuss their applications in lithium‐ion batteries, sodium‐ion batteries, and supercapacitors. Finally, the authors give their personal viewpoints about the challenges and opportunities for the future development about this direction.     

Metal Sulfide Hollow Nanostructures for Electrochemical Energy Storage

Metal sulfide hollow nanostructures (MSHNs) have received intensive attention as electrode materials for electrical energy storage (EES) systems due to their unique structural features and rich chemistry. Here, we summarize recent research progress in the rational design and synthesis of various metal sulfide hollow micro‐/nanostructures with controlled shape, composition and structural complexity, and their applications to lithium ion batteries (LIBs) and hybrid supercapacitors (HSCs). The current understanding of hollow structure control, including single‐shelled, yolk‐shelled, multi‐shelled MSHNs, and their hybrid micro‐/nanostructures with carbon (amorphous carbon nanocoating, graphene and hollow carbon), is focused on. The importance of proper structural and compositional control on the enhanced electrochemical properties of MSHNs is emphasized. A relationship between structural and compositional engineering with improved electrochemical activity of MSHNs is sought, in order to shed some light on future electrode design trends for next‐generation EES technologies.     

Integration: An Effective Strategy to Develop Multifunctional Energy Storage Devices

Energy storage devices are arousing increasing interest due to their key role in next‐generation electronics. Integration is widely explored as a general and effective strategy aiming at high performances. Recent progress in integrating a variety of functions into electrochemical energy storage devices is carefully described. Through integration at the level of materials: flexible, stretchable, responsive, and self‐healing devices are discussed to highlight the state‐of‐the‐art multi‐functional electronics. Through the integration at the level of devices, the incorporation of photovoltaic and piezoelectric devices is detailed to reflect the advances in self‐powering electronics. Integrated energy storage devices are presented for wearable applications to indicate a new growth direction. The main challenges and important directions are summarized to offer some useful clues for future development.     

Highly Stretchable Separator Membrane for Deformable Energy‐Storage Devices

With the emergence of stretchable electronic devices, there is growing interest in the development of deformable power accessories that can power them. To date, various approaches have been reported for replacing rigid components of typical batteries with elastic materials. Little attention, however, has been paid to stretchable separator membranes that can not only prevent internal short circuit but also provide an ionic conducting pathway between electrodes under extreme physical deformation. Herein, a poly(styrene‐b‐butadiene‐b‐styrene) (SBS) block copolymer–based stretchable separator membrane is fabricated by the nonsolvent‐induced phase separation (NIPS). The diversity of mechanical properties and porous structures can be obtained by using different polymer concentrations and tuning the affinity among major components of NIPS. The stretchable separator membrane exhibits a high stretchability of around 270% strain and porous structure having porosity of 61%. Thus, its potential application as a stretchable separator membrane for deformable energy devices is demonstrated by applying to organic/aqueous electrolyte–based rechargeable lithium‐ion batteries. As a result, these batteries manifest good cycle life and stable capacity retention even under a stretching condition of 100%, without compromising the battery's performance.     

Vanadate‐Based Materials for Li‐Ion Batteries: The Search for Anodes for Practical Applications

While the practical application of electrode materials depends intensively on the Li⁺ ion storage mechanisms correlating ultimately with the coulombic efficiency, reversible capacity, and morphology variation of electrode material upon cycling, only intercalation‐type electrode materials have proven viable for commercialization up to now. This paper reviews the promising anode materials of metal vanadates (M_xV_yO_z, M = Co, Cu, Mn, Fe, Zn, Ni, Li) that have high capacity, low cost, and abundant resource, and also discusses the related Li⁺ ion storage mechanism. It is concluded that most of these (M_xV_yO_z, M = Co, Cu, Mn, Fe, Zn, Ni) exhibit irreversible redox reactions upon lithiation/delithiation accompanied by large volume expansion, which is not favorable for industrial applications. In particular, Li₃VO₄ with specific intercalation Li⁺ ion storage mechanism and compatible merits of safety and energy density exhibits great potential for practical application. This review systematically summarizes the latest progress in Li₃VO₄ research, including the representative fabrication approaches for advanced morphology and state‐of‐the‐art technologies to boost performance and the morphology variation associated with Li⁺ ion storage mechanisms. Furthermore, an outlook on where breakthroughs for Li₃VO₄ may be most likely achieved will be provided.     

Transition Metal Oxide Anodes for Electrochemical Energy Storage in Lithium‐ and Sodium‐Ion Batteries

Lithium‐ion batteries (LIBs) with outstanding energy and power density have been extensively investigated in recent years, rendering them the most suitable energy storage technology for application in emerging markets such as electric vehicles and stationary storage. More recently, sodium, one of the most abundant elements on earth, exhibiting similar physicochemical properties as lithium, has been gaining increasing attention for the development of sodium‐ion batteries (SIBs) in order to address the concern about Li availability and cost—especially with regard to stationary applications for which size and volume of the battery are of less importance. Compared with traditional intercalation reactions, conversion reaction‐based transition metal oxides (TMOs) are prospective anode materials for rechargeable batteries thanks to their low cost and high gravimetric specific capacities. In this review, the recent progress and remaining challenges of conversion reactions for LIBs and SIBs are discussed, covering an overview about the different synthesis methods, morphological characteristics, as well as their electrochemical performance. Potential future research directions and a perspective toward the practical application of TMOs for electrochemical energy storage are also provided.     

Na‐Ion Batteries for Large Scale Applications: A Review on Anode Materials and Solid Electrolyte Interphase Formation

The urgent need for optimizing the available energy through smart grids and efficient large‐scale energy storage systems is pushing the construction and deployment of Li‐ion batteries in the MW range which, in the long term, are expected to hit the GW dimension while demanding over 1000 ton of positive active material per system. This amount of Li‐based material is equivalent to almost 1% of current Li consumption and can strongly influence the evolution of the lithium supply and cost. Given this uncertainty, it becomes mandatory to develop an energy storage technology that depends on almost infinite and widespread resources: Na‐ion batteries are the best technology for large‐scale applications. With small working cells in the market that cannot compete in cost ($/W h) with commercial Li‐ion batteries, the consolidation of Na‐ion batteries mainly depends on increasing their energy density and stability, the negative electrodes being at the heart of these two requirements. Promising Na‐based negative electrodes for large‐scale battery applications are reviewed, along with the study of the solid electrolyte interphase formed in the anode surface, which is at the origin of most of the stability problems.     

Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices

The successful isolation of phosphorene (atomic layer thick black phosphorus) in 2014 has currently aroused the interest of 2D material researchers. In this review, first, the fundamentals of phosphorus allotropes, phosphorene, and black phosphorus, are briefly introduced, along with their structures, properties, and synthesis methods. Second, the readers are presented with an overview of their energy applications. Particularly in electrochemical energy storage, the large interlayer spacing (0.53 nm) in phosphorene allows the intercalation/deintercalation of larger ions as compared to its graphene counterpart. Therefore, phosphorene may possess greater potential for high electrochemical performance. In addition, the status of lithium ion batteries as well as secondary sodium ion batteries is reviewed. Next, each application for energy generation, conversion, and storage is described in detail with milestones as well as the challenges. These emerging applications include supercapacitors, photovoltaic devices, water splitting, photocatalytic hydrogenation, oxygen evolution, and thermoelectric generators. Finally the fast‐growing dynamic field of phosphorene research is summarized and perspectives on future possibilities are presented calling on the efforts of chemists, physicists, and material scientists     

Textile‐Based Electrochemical Energy Storage Devices

In the past few years, insensitive attentions have been drawn to wearable and flexible energy storage devices/systems along with the emergence of wearable electronics. Much progress has been achieved in developing flexible electrochemical energy storage devices with high end‐use performance. However, challenges still remain in well balancing the electrochemical properties, mechanical properties, and the processing technologies. In this review, a specific perspective on the development of textile‐based electrochemical energy storage devices (TEESDs), in which textile components and technologies are utilized to enhance the energy storage ability and mechanical properties of wearable electronic devices, is provided. The discussion focuses on the material preparation and characteristics, electrode and device fabrication strategies, electrochemical performance and metrics, wearable compatibility, and fabrication scalability of TEESDs including textile‐based supercapacitors and lithium‐ion batteries.     

Fast Charging Materials for High Power Applications

An overview of fast charging materials for high power applications is given. The behavior at high current density of several anodic and cathodic materials that have been utilized in lithium‐, sodium‐, and potassium‐ion batteries is considered. Furthermore, the behavior of capacitive and pseudocapacitive materials suitable for electrochemical capacitors and, also, of those that have been utilized for the realization of hybrid‐ion capacitors, which are nowadays an interesting reality in the field of high power devices, is discussed. The advantages and limitations of all these materials are critically analyzed with the aim of understanding their impact on real devices. On the basis of this analysis, the most important aspects are identified, which should be addressed in the future for the realization of advanced high power devices.