Amorphous Tin‐Based Composite Oxide: A High‐Rate and Ultralong‐Life Sodium‐Ion‐Storage Material

Energy‐storage technology is moving beyond lithium batteries to sodium as a result of its high abundance and low cost. However, this sensible transition requires the discovery of high‐rate and long‐lifespan anode materials, which remains a significant challenge. Here, the facile synthesis of an amorphous Sn₂P₂O₇/reduced graphene oxide nanocomposite and its sodium storage performance between 0.01 and 3.0 V are reported for the first time. This hybrid electrode delivers a high specific capacity of 480 mA h g^?1 at a current density of 50 mA g^?1 and superior rate performance of 250 and 165 mA h g^?1 at 2 and 10 A g^?1, respectively. Strikingly, this anode can sustain 15 000 cycles while retaining over 70% of the initial capacity. Quantitative kinetic analysis reveals that the sodium storage is governed by pseudocapacitance, particularly at high current rates. A full cell with sodium super ionic conductor (NASICON)‐structured Na₃V₂(PO₄)₂F₃ and Na₃V₂(PO₄)₃ as cathodes exhibits a high energy density of over 140 W h kg^?1 and a power density of nearly 9000 W kg^?1 as well as stability over 1000 cycles. This exceptional performance suggests that the present system is a promising power source for promoting the substantial use of low‐cost energy storage systems.     

Facile and Scalable Preparation of Ruthenium Oxide‐Based Flexible Micro‐Supercapacitors

Tremendous efforts have been invested in the development of the internet of things during the past 10 years. Implantable sensors still need embedded miniaturized energy harvesting devices, since commercialized thin films and microbatteries do not provide sufficient power densities and suffer from limited lifetime. Therefore, micro‐supercapacitors are good candidates to store energy and deliver power pulses while providing non‐constant voltage output with time. However, multistep expensive protocols involving mask aligners and sophisticated cleanrooms are used to prepare these devices. Here, a simple and versatile laser‐writing procedure to integrate flexible micro‐supercapacitors and microbatteries on current‐collector‐free polyimide foils is reported, starting from commercial powders. Ruthenium oxide (RuO₂)‐based micro‐supercapacitors are prepared by laser irradiation of a bilayered tetrachloroauric acid (HAuCl₄ · 3H₂O)–cellulose acetate/RuO₂ film deposited by spin‐coating, which leads to adherent Au/RuO₂ electrodes with a unique pillar morphology. The as‐prepared microdevices deliver 27 mF cm^?2/540 F cm^?3 in 1 m H₂SO₄ and retain 80% of the initial capacitance after 10 000 cycles. This simple process is applied to make carbon‐based micro‐supercapacitors, as well as metal oxide based pseudocapacitors and battery electrodes, thus offering a straightforward solution to prepare low‐cost flexible microdevices at a large scale.     

Inverted Design for High‐Performance Supercapacitor Via Co(OH)2‐Derived Highly Oriented MOF Electrodes

Metal organic frameworks (MOFs) are considered as promising candidates for supercapacitors because of high specific area and potential redox sites. However, their shuffled orientations and low conductivity nature lead to severely‐degraded performance. Designing an accessibly‐manipulated and efficient method to address those issues is of outmost significance for MOF application in supercapacitors. It is the common way that MOFs scarify themselves as templates or precursors to prepare target products. But to reversely think it, using target products to prepare MOF could be the way to unlock the bottleneck of MOFs' performance in supercapacitors. Herein, a novel strategy using Co(OH)₂ as both the template and precursor to fabricate vertically‐oriented MOF electrode is proposed. The electrode shows a double high specific capacitance of 1044 Fg^?1 and excellent rate capability compared to MOF in powder form. An asymmetric supercapacitor was also fabricated, which delivers a maximum energy density of 28.5 W h kg^?1 at a power density of 1500 W kg^?1, and the maximum of 24000 W kg^?1 can be obtained with a remaining energy density of 13.3 W h kg^?1. Therefore, the proposed strategy paves the way to unlock the inherent advantages of MOFs and also inspires for advanced MOF synthesis with optimum performance.     

Nanostructured Ternary Electrodes for Energy‐Storage Applications

A three‐component, flexible electrode is developed for supercapacitors over graphitized carbon fabric, utilizing γ‐MnO₂ nanoflowers anchored onto carbon nanotubes (γ‐MnO₂/CNT) as spacers for graphene nanosheets (GNs). The three‐component, composite electrode doubles the specific capacitance with respect to GN‐only electrodes, giving the highest‐reported specific capacitance (308 F g^?1) for symmetric supercapacitors containing MnO₂ and GNs using a two‐electrode configuration, at a scan rate of 20 mV s^?1. A maximum energy density of 43 W h kg^?1 is obtained for our symmetric supercapacitors at a constant discharge‐current density of 2.5 A g^?1 using GN–(γ‐MnO₂/CNT)‐nanocomposite electrodes. The fabricated supercapacitor device exhibits an excellent cycle life by retaining ≈90% of the initial specific capacitance after 5000 cycles.     

All Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors

2D transition metal carbides and nitrides, known as MXenes, are an emerging class of 2D materials with a wide spectrum of potential applications, in particular in electrochemical energy storage. The hydrophilicity of MXenes combined with their metallic conductivity and surface redox reactions is the key for high‐rate pseudocapacitive energy storage in MXene electrodes. However, symmetric MXene supercapacitors have a limited voltage window of around 0.6 V due to possible oxidation at high anodic potentials. In this study, the fact that titanium carbide MXene (Ti₃C₂T_x) can operate at negative potentials in acidic electrolyte is exploited, to design an all‐pseudocapacitive asymmetric device by combining it with a ruthenium oxide (RuO₂) positive electrode. This asymmetric device operates at a voltage window of 1.5 V, which is about two times wider than the operating voltage window of symmetric MXene supercapacitors, and is the widest voltage window reported to date for MXene‐based supercapacitors. The complementary working potential windows of MXene and RuO₂, along with proton‐induced pseudocapacitance, significantly enhance the device performance. As a result, the asymmetric devices can deliver an energy density of 37 µW h cm^?2 at a power density of 40 mW cm^?2, with 86% capacitance retention after 20 000 charge–discharge cycles. These results show that pseudocapacitive negative MXene electrodes can potentially replace carbon‐based materials in asymmetric electrochemical capacitors, leading to an increased energy density.     

Harmonizing Energy and Power Density toward 2.7 V Asymmetric Aqueous Supercapacitor

Tremendous research efforts are devoted to developing wide potential window aqueous supercapacitors to resolve their low energy density concern. While the operational potential window is dictated by the intrinsic electrochemical stability of water (1.23 V), such a bottleneck may be surpassed by leveraging the additional overpotential of the oxygen evolution reaction and the hydrogen evolution reaction (HER). Herein, by employing an electroreduction technique, Na⁺ is adsorbed onto the carbon negative electrode which effectively acts as a physical barrier to hinder intermediate HER product formation, thereby reducing HER activity. To complement the wide potential carbon electrode, Na_0.25MnO₂ is employed as the positive electrode to take advantage of the extra energy (i.e., increased overpotential) required for Na⁺ insertion process into the structure. The asymmetric supercapacitor exhibits high energy density of 61.1 W h kg^?1 at a power density of 982 W kg^?1, and even at an ultrahigh power density of 42.9 kW kg^?1, a respectable energy density of 16.3 W h kg^?1 is attained. In addition, 93.7% capacitance retention is recorded after cycling for 10 000 cycles which further demonstrates its suitability as supercapacitor. The present success in fabricating a 2.7 V asymmetric supercapacitor will open a promising research route toward achieving high energy density and high power density.     

NiCo2S4 Nanosheets Grown on Nitrogen‐Doped Carbon Foams as an Advanced Electrode for Supercapacitors

To push the energy density limit of supercapacitors, a new class of electrode materials with favorable architectures is strongly needed. Binary metal sulfides hold great promise as an electrode material for high‐performance energy storage devices because they offer higher electrochemical activity and higher capacity than mono‐metal sulfides. Here, the rational design and fabrication of NiCo₂S₄ nanosheets supported on nitrogen‐doped carbon foams (NCF) is presented as a novel flexible electrode for supercapacitors. A facile two‐step method is developed for growth of NiCo₂S₄ nanosheets on NCF with robust adhesion, involving the growth of Ni‐Co precursor and subsequent conversion into NiCo₂S₄ nanosheets through sulfidation process. Benefiting from the compositional features and 3D electrode architectures, the NiCo₂S₄/NCF electrode exhibits greatly improved electrochemical performance with ultrahigh capacitance (877 F g^?1 at 20 A g^?1) and excellent cycling stability. Moreover, a binder‐free asymmetric supercapacitor device is also fabricated by using NiCo₂S₄/NCF as the positive electrode and ordered mesoporous carbon (OMC)/NCF as the negative electrode; this demonstrates high energy density (≈45.5 Wh kg^?1 at 512 W kg^?1).     

Ultrafast Aqueous Potassium‐Ion Batteries Cathode for Stable Intermittent Grid‐Scale Energy Storage

The inherent short‐term transience of solar and wind sources cause significant challenges for the electricity grid. Energy storage systems that can simultaneously provide high power, long cycle life, and high energy efficiency are required to accommodate the fast‐changing output fluctuations. Here, an ultrafast aqueous K‐ion battery based on the potassium‐rich mesoporous nickel ferrocyanide (II) (K₂NiFe(CN)₆·1.2H₂O) is developed. This battery achieves an unprecedented rate capability up to 500 C (8214 W kg^?1), which only takes 4.1 s for one charge or discharge. The open‐framework structure of K₂NiFe(CN)₆·1.2H₂O with small volume variation supports the capacity retention of 98.6% after 5000 cycles, and a superior round‐trip energy efficiency of 95.6% at a 5 C rate. Beyond monovalent ion storage, K₂NiFe(CN)₆·1.2H₂O can also function as a versatile high‐rate cathode for divalent‐ion batteries (Mg²⁺), trivalent‐ion batteries (Al³⁺), and hybrid full‐cells applications. These properties represent a significant step forward in the exploitation of ultrafast metal ions storage, and accelerate the development of intermittent grid‐scale energy storage technologies.     

Electrospun LiFe1−yMnyPO4/C Nanofiber Composites as Self‐Supporting Cathodes in Li‐Ion Batteries

LiFe_1?yMn_yPO₄/C nanofiber composites are applied as cathode materials in Li‐ion batteries and their electrochemical properties are explored. Nanofiber meshes are synthesized via electrospinning of commercially available precursors (LiOH·H₂O, FeSO₄·7H₂O, MnSO₄·H₂O, H₃PO₄, and polyvinylpyrrolidone). Nanofibers calcined at 850 °C under Ar/H₂ (95/5 vol%) atmosphere are directly used as self‐supporting electrodes in Swagelok half cells without the need for any conductive additive or polymer binder. The morphology, phase, and chemical composition of as‐prepared and heat‐treated samples are analyzed by means of X‐ray powder diffraction, thermogravimetric analysis, and electron and scanning microscopy techniques. Brunauer–Emmett–Teller gas adsorption–desorption measurements show a high specific surface area (111m² g^?1) for LiFe_0.5Mn_0.5PO₄. The influence of different Fe/Mn ratios on the morphology, electrical, and electrochemical performances are analyzed.     

Manganese Oxide/Carbon Aerogel Composite: an Outstanding Supercapacitor Electrode Material

Manganese oxide/carbon aerogel composite electrodes are prepared by a self‐limiting anodic‐electrochemical deposition of manganese oxide into a binder‐enriched carbon aerogel layer, drop‐cast on a graphite substrate, using 0.1 M Mn(CH₃COO)₂·4H₂O as the electrolyte. Manganese oxide grows in the form of thin nanofibers along the backbone of the carbon aerogel, leaving adequate working space for the electrolyte and enabling a fuller extent of the utilization of the manganese oxide to make the composite an outstanding supercapacitor electrode material. The manganese oxide is determined to be Mn₃O₄ with the Raman spectroscopy and high‐resolution transmission electron microscopy. The rectangularity of the cyclic‐voltammogram loops of the composite electrode is excellent and remains that way for scan rates up to a very‐high value of 500 mV s^?1, indicating extremely good redox reversibility and cycle efficiency. At a scan rate of 25 mV s^?1, the specific capacitance, as measured in 0.5 M Na₂SO₄ for a potential window of 0.1–0.9 V vs. Ag/AgCl, reaches a maximum value of 503 F g^?1 and experiences only a negligible decay of less than 1% at the 6000th cycle, implying an extraordinary cycling stability. The cycling efficiency is as high as 98% at a current density of 8 A g^?1 cm^?2, showing an almost‐ideal capacitive behavior. The power density reaches 48.5 kW kg^?1 and the energy density 21.6 W h kg^?1 at a scan rate of 500 mV s^?1, well above the specifications of current state‐of‐the‐art supercapacitors.     

Molecularly Stacking Manganese Dioxide/Titanium Carbide Sheets to Produce Highly Flexible and Conductive Film Electrodes with Improved Pseudocapacitive Performances

2D nanostructures with high surface area and flexibility are regarded as a promising building platform for flexible supercapacitors that are attracting tremendous attention due to their potential applications in various wearable technologies. Notably, although pseudocapacitive metal oxides are widely accepted as a very important class of electrochemically active materials, the utilization of 2D metal oxide sheets in the preparation of flexible supercapacitors is very rare. The scarcity of a suitable filler with the integrated properties of both high conductivity and excellent hydrophilicity is probably to blame. In this work, by introducing a recently discovered intriguing material, Ti₃C₂ sheets, a novel MnO₂/Ti₃C₂ hybrid with a molecularly stacked structure is developed using a simple and scalable mixing and filtration method. Their individual advantages are combined in the hybrid, thus delivering excellent electrochemical performances. A highly flexible and symmetric supercapacitor based on the novel hybrid electrode manifests top‐class electrochemical performance with maximum energy and power densities of 8.3 W h kg^?1 (at 221.33 W kg^?1) and 2376 W kg^?1 (at 3.3 W h kg^?1), respectively, regardless of the various bending states, suggesting enormous possibilities for applications in future flexible and portable micropower systems.     

Surface Pseudocapacitive Mechanism of Molybdenum Phosphide for High‐Energy and High‐Power Sodium‐Ion Capacitors

Sodium‐based energy storage technologies are potential candidates for large‐scale grid applications owing to the earth abundance and low cost of sodium resources. Transition metal phosphides, e.g. MoP, are promising anode materials for sodium‐ion storage, while their detailed reaction mechanisms remain largely unexplored. Herein, the sodium‐ion storage mechanism of hexagonal MoP is systematically investigated through experimental characterizations, density functional theory calculations, and kinetics analysis. Briefly, it is found that the naturally covered surface amorphous molybdenum oxides layers on the MoP grains undergo a faradaic redox reaction during sodiation and desodiation, while the inner crystalline MoP remains unchanged. Remarkably, the MoP anode exhibits a pseudocapacitive‐dominated behavior, enabling the high‐rate sodium storage performance. By coupling the pseudocapacitive anode with a high‐rate‐battery‐type Na₃V₂O₂(PO₄)₂F@rGO cathode, a novel sodium‐ion full cell delivers a high energy density of 157 Wh kg^?1 at 97 W kg^?1 and even 52 Wh kg^?1 at 9316 W kg^?1. These findings present the deep understanding of the sodium‐ion storage mechanism in hexagonal MoP and offer a potential route for the design of high‐rate sodium‐ion storage materials and devices.     

A High‐Power Na3V2(PO4)3‐Bi Sodium‐Ion Full Battery in a Wide Temperature Range

Sodium‐ion batteries (SIBs) that operate in a wide temperature range are in high demand for practical large‐scale electric energy storage. Herein, a novel full SIB is composed of a bulk Bi anode, a Na₃V₂(PO₄)₃/carbon nanotubes composite (NVP‐CNTs) cathode and a NaPF₆‐diglyme electrolyte. The Bi anode gradually evolves into a porous network in the ether‐based electrolyte during initial cycles, and in the NVP‐CNTs cathode the NVP is cross linked by CNTs to show large exchange current density. These unique features merit the full SIB of Bi//NVP‐CNTs with high Na⁺ diffusion coefficient and low reaction activation energy, and hence fast Na⁺ transport and facile redox reaction kinetics. The resultant full SIB presents high power density of 2354.6 W kg^?1 and energy density of 150 Wh kg^?1 and superior cycling stability in a wide temperature range from ?15 to 45 °C. This will shed light on battery design, and promote their development for practical applications in various weather conditions.     

3D Architecture Materials Made of NiCoAl‐LDH Nanoplates Coupled with NiCo‐Carbonate Hydroxide Nanowires Grown on Flexible Graphite Paper for Asymmetric Supercapacitors

Asymmetric supercapacitors featuring both high energy and power densities as well as a long lifespan are much sought after and may become a reality depending on the availability of cheap yet highly active electrode materials. Here, a novel flexible architecture electrode made of NiCoAl‐layered double hydroxide (NiCoAl‐LDH) nanoplates coupled with NiCo‐carbonate hydroxide (NiCo‐CH) nanowires, grown on graphite paper via an in situ, one‐step, hydrothermal method is reported. The nanowire‐like NiCo‐CH species in the nanoplate matrix function as a scaffold and support the dispersion of the NiCoAl‐LDH nanoplates, resulting in a relatively loose and open structure within the electrode matrix. Asymmetric supercapacitors fabricated using the nanohybrids as the positive electrode and a typical activated carbon (AC) as negative electrode show a high energy density of 58.9 Wh kg^?1 at a power density of 0.4 kW kg^?1, which is based on the total mass of active materials at a voltage of 1.6 V. An energy density of 14.9 Wh kg^?1 can be retained even at a high power density of 51.5 kW kg^?1. Our asymmetric supercapacitor also exhibits an excellent long cycle life, whereby a specific capacitance of 97% is retained even after 10 000 cycles.     

Controlled Growth of NiMoO4 Nanosheet and Nanorod Arrays on Various Conductive Substrates as Advanced Electrodes for Asymmetric Supercapacitors

Hierarchical NiMoO₄ architectures assembled from well‐aligned uniform nanosheets or nanorods are successfully grown on various conductive substrates using a facile and effective general approach. Importantly, the nanostructures of NiMoO₄ can be easily controlled to be nanosheets or nanorods by using different solvents. By virtue of their intriguing structure features, NiMoO₄ nanosheets as integrated additive‐free electrodes for supercapacitors manifest higher Faradaic capacitance than NiMoO₄ nanorods. Moreover, an asymmetric supercapacitor (ASC) is constructed using the as‐prepared NiMoO₄ nanosheets as the positive electrode and activated carbon (AC) as the negative electrode. The optimized ASC with an extended operating voltage range of 0–1.7 V displays excellent electrochemical performance with a high energy density of 60.9 Wh kg^?1 at a power density of 850 W kg^?1 in addition to superior rate capability. Furthermore, the NiMoO₄//AC ASC device exhibits remarkable cycling stability with 85.7% specific capacitance retention after 10 000 cycles. The results show that these NiMoO₄‐based nanostructures are promising for high‐energy supercapacitors.     

All‐Printed MnHCF‐MnOx‐Based High‐Performance Flexible Supercapacitors

Here, a simple active materials synthesis method is presented that boosts electrode performance and utilizes a facile screen‐printing technique to prepare scalable patterned flexible supercapacitors based on manganese hexacyanoferrate‐manganese oxide and electrochemically reduced graphene oxide electrode materials (MnHCF‐MnO_x/ErGO). A very simple in situ self‐reaction method is developed to introduce MnO_x pseudocapacitor material into the MnHCF system by using NH₄F. This MnHCF‐MnO_x electrode materials can deliver excellent capacitance of 467 F g^?1 at a current density of 1 A g^?1, which is a 2.4 times capacitance increase compared to MnHCF. In addition a printed, patterned, flexible MnHCF‐MnO_x/ErGO supercapacitor is fabricated, showing a remarkable areal capacitance of 16.8 mF cm^?2 and considerable energy and power density of 0.5 mWh cm^?2 and 0.0023 mW cm^?2, respectively. Furthermore, the printed patterned flexible supercapacitors also exhibit exceptional flexibility, and the capacitance remains stable, even while bending to various angles (60°, 90°, and 180°) and for 100 cycles. The flexible supercapacitor arrays integrated by multiple prepared single supercapacitors can power various LEDs even in the bent states. This approach offers promising opportunities for the development of printable energy storage materials and devices with high energy density, large scalability, and excellent flexibility.     

Realizing Reversible Conversion‐Alloying of Sb(V) in Polyantimonic Acid for Fast and Durable Lithium‐ and Potassium‐Ion Storage

Finding suitable electrode materials for alkali‐metal‐ion storage is vital to the next‐generation energy‐storage technologies. Polyantimonic acid (PAA, H₂Sb₂O₆ · nH₂O), having pentavalent antimony species and an interconnected tunnel‐like pyrochlore crystal framework, is a promising high‐capacity energy‐storage material. Fabricating electrochemically reversible PAA electrode materials for alkali‐metal‐ion storage is a challenge and has never been reported due to the extremely poor intrinsic electronic conductivity of PAA associated with the highest oxidation state Sb(V). Combining nanostructure engineering with a conductive‐network construction strategy, here is reported a facile one‐pot synthesis protocol for crafting uniform internal‐void‐containing PAA nano‐octahedra in a composite with nitrogen‐doped reduced graphene oxide nanosheets (PAA?N‐RGO), and for the first time, realizing the reversible storage of both Li⁺ and K⁺ ions in PAA?N‐RGO. Such an architecture, as validated by theoretical calculations and ex/in situ experiments, not only fully takes advantage of the large‐sized tunnel transport pathways (0.37 nm²) of PAA for fast solid‐phase ionic diffusion but also leads to exponentially increased electrical conductivity (3.3 S cm^?1 in PAA?N‐RGO vs 4.8 × 10^?10 S cm^?1 in bare‐PAA) and yields an inside‐out buffer function for accommodating volume expansion. Compared to electrochemically irreversible bare‐PAA, PAA?N‐RGO manifests reversible conversion‐alloying of Sb(V) toward fast and durable Li⁺‐ and K⁺‐ion storage.     

Wearable High‐Performance Supercapacitors Based on Silver‐Sputtered Textiles with FeCo2S4–NiCo2S4 Composite Nanotube‐Built Multitripod Architectures as Advanced Flexible Electrodes

To achieve high‐performance wearable supercapacitors (SCs), a new class of flexible electrodes with favorable architectures allowing large porosity, high conductivity, and good mechanical stability is strongly needed. Here, this study reports the rational design and fabrication of a novel flexible electrode with nanotube‐built multitripod architectures of ternary metal sulfides' composites (FeCo₂S₄–NiCo₂S₄) on a silver‐sputtered textile cloth. Silver sputtering is applicable to almost all kinds of textiles, and S^2? concentration is optimized during sulfidation process to achieve such architectures and also a complete sulfidation assuring high conductivity. New insights into concentration‐dependent sulfidation mechanism are proposed. The additive‐free FeCo₂S₄–NiCo₂S₄ electrode shows a high specific capacitance of 1519 F g^?1 at 5 mA cm^?2 and superior rate capability (85.1% capacitance retention at 40 mA cm^?2). All‐solid‐state SCs employing these advanced electrodes deliver high energy density of 46 W h kg^?1 at 1070 W kg^?1 as well as achieve remarkable cycling stability retaining 92% of initial capacitance after 3000 cycles at 10 mA cm^?2, and outstanding reliability with no capacitance degradation under large twisting. These are attributed to the components' synergy assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. An almost linear increase in capacitance with devices' area indicates possibility to meet various energy output requirements. This work provides a general, low‐cost route to wearable power sources.     

Hierarchical Zn–Co–S Nanowires as Advanced Electrodes for All Solid State Asymmetric Supercapacitors

A facile two‐step strategy is developed to design the large‐scale synthesis of hierarchical, unique porous architecture of ternary metal hydroxide nanowires grown on porous 3D Ni foam and subsequent effective sulfurization. The hierarchical Zn–Co–S nanowires (NWs) arrays are directly employed as an electrode for supercapacitors application. The as‐synthesized Zn–Co–S NWs deliver an ultrahigh areal capacity of 0.9 mA h cm^?2 (specific capacity of 366.7 mA h g^?1) at a current density of 3 mA cm^?2, with an exceptional rate capability (≈227.6 mA h g^?1 at a very high current density of 40 mA cm^?2) and outstanding cycling stability (≈93.2% of capacity retention after 10 000 cycles). Most significantly, the assembled Zn–Co–S NWs//Fe₂O₃@reduced graphene oxide asymmetric supercapacitors with a wide operating potential window of ≈1.6 V yield an ultrahigh volumetric capacity of ≈1.98 mA h cm^?3 at a current density of 3 mA cm^?2, excellent energy density of ≈81.6 W h kg^?1 at a power density of ≈559.2 W kg^?1, and exceptional cycling performance (≈92.1% of capacity retention after 10 000 cycles). This general strategy provides an alternative to design the other ternary metal sulfides, making it facile, free‐standing, binder‐free, and cost‐effective ternary metal sulfide‐based electrodes for large‐scale applications in modern electronics.     

Battery‐like Supercapacitors from Vertically Aligned Carbon Nanofiber Coated Diamond: Design and Demonstrator

To fabricate battery‐like supercapacitors with high power and energy densities, big capacitances, as well as long‐term capacitance retention, vertically aligned carbon nanofibers (CNFs) grown on boron doped diamond (BDD) films are employed as the capacitor electrodes. They possess large surface areas, high conductivity, high stability, and importantly are free of binder. The large surface areas result from their porous structures. The containment of graphene layers and copper metal catalysts inside CNFs leads to their high conductivity. Both electrical double layer capacitors (EDLCs) in inert solutions and pseudocapacitors (PCs) using Fe(CN)₆^3?/4? redox‐active electrolytes are constructed with three‐ and two‐electrode systems. The assembled two‐electrode symmetrical supercapacitor devices exhibit capacitances of 30 and 48 mF cm^?2 at 10 mV s^?1 for EDLC and PC devices, respectively. They remain constant even after 10 000 charging/discharging cycles. The power densities are 27.3 and 25.3 kW kg^?1 for EDLC and PC devices, together with their energy densities of 22.9 and 44.1 W h kg^?1, respectively. The performance of these devices is superior to most of the reported supercapacitors and batteries. Vertically aligned CNF/BDD hybrid films are thus useful to construct high‐performance battery‐like and industry‐orientated supercapacitors for future power devices.