Exploiting the Condensation Reactions of Acetophenone to Engineer Carbon‐Encapsulated Nb2O5 Nanocrystals for High‐Performance Li and Na Energy Storage Systems

Efficient synthetic methods to produce high‐performance electrode‐active materials are crucial for developing energy storage devices for large‐scale applications, such as hybrid supercapacitors (HSCs). Here, an effective approach to obtain controllable carbon‐encapsulated T‐Nb₂O₅ nanocrystals (NCs) is presented, based on the solvothermal treatment of NbCl₅ in acetophenone. Two separate condensation reactions of acetophenone generate an intimate and homogeneous mixture of Nb₂O₅ particles and 1,3,5‐triphenylbenzene (TPB), which acts as a unique carbon precursor. The electrochemical performance of the resulting composites as anode electrode materials can be tuned by varying the Nb₂O₅/TPB ratio. Remarkable performances are achieved for Li‐ion and Na‐ion energy storage systems at high charge–discharge rates (specific capacities of ≈90 mAh g^?1 at 100 C rate for lithium and ≈125 mAh g^?1 at 20 C for sodium). High energy and power densities are also achieved with Li‐ and Na‐ion HSC devices constructed by using the Nb₂O₅/C composites as anode and activated carbon (YPF‐50) as cathode, demonstrating the excellent electrochemical properties of the materials synthesized with this approach.     

3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries

A simple and template‐free method for preparing three‐dimensional (3D) porous γ‐Fe₂O₃@C nanocomposite is reported using an aerosol spray pyrolysis technology. The nanocomposite contains inner‐connected nanochannels and γ‐Fe₂O₃ nanoparticles (5 nm) uniformly embedded in a porous carbon matrix. The size of γ‐Fe₂O₃ nanograins and carbon content can be controlled by the concentration of the precursor solution. The unique structure of the 3D porous γ‐Fe₂O₃@C nanocomposite offers a synergistic effect to alleviate stress, accommodate large volume change, prevent nanoparticles aggregation, and facilitate the transfer of electrons and electrolyte during prolonged cycling. Consequently, the nanocomposite shows high‐rate capability and long‐term cyclability when applied as an anode material for Na‐ion batteries (SIBs). Due to the simple one‐pot synthesis technique and high electrochemical performance, 3D porous γ‐Fe₂O₃@C nanocomposites have a great potential as anode materials for rechargeable SIBs.     

Nanoparticles Encapsulated in Porous Carbon Matrix Coated on Carbon Fibers: An Ultrastable Cathode for Li‐Ion Batteries

Nanostructured V₂O₅ is emerging as a new cathode material for lithium ion batteries for its distinctly high theoretic capacity over the current commercial cathodes. The main challenges associated with nanostructured V₂O₅ cathodes are structural degradation, instability of the solid‐electrolyte interface layer, and poor electron conductance, which lead to low capacity and rapid decay of cyclic stability. Here, a novel composite structure of V₂O₅ nanoparticles encapsulated in 3D networked porous carbon matrix coated on carbon fibers (V₂O₅/3DC‐CFs) is reported that effectively addresses the mentioned problems. Remarkably, the V₂O₅/3DC‐CF electrode exhibits excellent overall lithium‐storage performance, including high Coulombic efficiency, excellent specific capacity, outstanding cycling stability and rate property. A reversible capacity of ≈183 mA h g^?1 is obtained at a high current density of 10 C, and the battery retains 185 mA h g^?1 after 5000 cycles, which shows the best cycling stability reported to date among all reported cathodes of lithium ion batteries as per the knowledge. The outstanding overall properties of the V₂O₅/3DC‐CF composite make it a promising cathode material of lithium ion batteries for the power‐intensive energy storage applications.     

In Situ Synthesis of Hierarchical Core Double‐Shell Ti‐Doped LiMnPO4@NaTi2(PO4)3@C/3D Graphene Cathode with High‐Rate Capability and Long Cycle Life for Lithium‐Ion Batteries

Olivine‐type LiMnPO₄ (LMP) cathodes have gained enormous attraction for Li‐ion batteries (LIBs), thanks to their large theoretical capacity, high discharge platform, and thermal stability. However, it is still hugely challenging to achieve encouraging Li‐storage behaviors owing to their low electronic conductivity and limited lithium diffusion. Herein, the core double‐shell Ti‐doped LMP@NaTi₂(PO₄)₃@C/3D graphene (TLMP@NTP@C/3D‐G) architecture is designed and constructed via an in situ synthetic methodology. A continuous electronic conducting network is formed with the unfolded 3D‐G and conducting carbon nanoshell. The Nasicon‐type NTP nanoshell with exceptional ionic conductivity efficiently inhibits gradual enrichment in by‐products, and renders low surfacial/interfacial electron/ion‐diffusion resistance. Besides, a rapid Li⁺ diffusion in the bulk structure is guaranteed with the reduction of Mn_Li+˙ antisite defects originating from the synchronous Ti‐doping. Benefiting from synergetic contributions from these design rationales, the integrated TLMP@NTP@C/3D‐G cathode yields high initial discharge capacity of ≈164.8 mAh g^?1 at 0.05 C, high‐rate reversible capacity of ≈116.2 mAh g^?1 at 10 C, and long‐term capacity retention of ≈93.3% after 600 cycles at 2 C. More significantly, the electrode design developed here will exert significant impact upon constructing other advanced cathodes for high‐energy/power LIBs.     

Silica Restricting the Sulfur Volatilization of Nickel Sulfide for High‐Performance Lithium‐Ion Batteries

Nickel sulfides are regarded as promising anode materials for advanced rechargeable lithium‐ion batteries due to their high theoretical capacity. However, capacity fade arising from significant volume changes during operation greatly limits their practical applications. Herein, confined NiS_x@C yolk–shell microboxes are constructed to address volume changes and confine the active material in the internal void space. Having benefited from the yolk–shell structure design, the prepared NiS_x@C yolk–shell microboxes display excellent electrochemical performance in lithium‐ion batteries. Particularly, it delivers impressive cycle stability (460 mAh g^?1 after 2000 cycles at 1 A g^?1) and superior rate performance (225 mAh g^?1 at 20 A g^?1). Furthermore, the lithium storage mechanism is ascertained with in situ synchrotron high‐energy X‐ray diffractions and in situ electrochemical impedance spectra. This unique confined yolk–shell structure may open up new strategies to create other advanced electrode materials for high performance electrochemical storage systems.     

Iron‐Oxide‐Based Advanced Anode Materials for Lithium‐Ion Batteries

Iron oxides, such as Fe₂O₃ and Fe₃O₄, have recently received increased attention as very promising anode materials for rechargeable lithium‐ion batteries (LIBs) because of their high theoretical capacity, non‐toxicity, low cost, and improved safety. Nanostructure engineering has been demonstrated as an effective approach to improve the electrochemical performance of electrode materials. Here, recent research progress in the rational design and synthesis of diverse iron oxide‐based nanomaterials and their lithium storage performance for LIBs, including 1D nanowires/rods, 2D nanosheets/flakes, 3D porous/hierarchical architectures, various hollow structures, and hybrid nanostructures of iron oxides and carbon (including amorphous carbon, carbon nanotubes, and graphene). By focusing on synthesis strategies for various iron‐oxide‐based nanostructures and the impacts of nanostructuring on their electrochemical performance, novel approaches to the construction of iron‐oxide‐based nanostructures are highlighted and the importance of proper structural and compositional engineering that leads to improved physical/chemical properties of iron oxides for efficient electrochemical energy storage is stressed. Iron‐oxide‐based nanomaterials stand a good chance as negative electrodes for next generation LIBs.     

Understanding Ostwald Ripening and Surface Charging Effects in Solvothermally‐Prepared Metal Oxide–Carbon Anodes for High Performance Rechargeable Batteries

Metal oxides synthesized by the solvothermal approach have widespread applications, while their nanostructure control remains challenging because their reaction mechanism is still not fully understood. Herein, it is demonstrated how the competitive relation between Ostwald ripening and surface charging during solvothermal synthesis is crucial to engineering high‐quality metal (oxide)–carbon nanomaterials. Using SnO₂ as a case study, a new type of hollow SnO₂–C hybrid nanoparticles is synthesized consisting of core–shell structured SnO₂@C nanodots (which has not been previously reported). This new anode material exhibits extremely high lithium storage capacity of 1225 and 955 mAh g^?1 at 200 and 500 mA g^?1, respectively, and excellent cycling stability. In addition, full‐battery cells are constructed combining SnO₂–C anode with Ni‐rich cathode, which can be charged to a higher voltage compared to commercial graphite anode and still demonstrate extraordinary rate performance. This study provides significant insight into the largely unexplored reaction mechanism during solvothermal synthesis, and demonstrates how such understanding can be used to achieve high‐performance metal (oxide)–C anodes for rechargeable batteries.     

High Reversible Lithium Storage Capacity and Structural Changes of Fe2O3 Nanoparticles Confined inside Carbon Nanotubes

The structural evolution of electrochemically prelithiated Fe₂O₃ nanoparticles confined in carbon nanotubes (CNTs) during lithium insertion/extraction is studied by in situ transmission electron microscopy. It is found that the aggregation and coarsening of Fe core‐containing Li₂O (Fe@Li₂O) nanograins formed during the charge process are prevented by the spatial restriction of the CNTs. A high reversible capacity of 2071 mA h g^?1 for the encapsulated Fe₂O₃ nanoparticles in CNTs is demonstrated when the material is used as the anode of lithium ion batteries. This is the highest reversible capacity ever reported for an Fe₂O₃ electrode. The significantly improved lithium storage capacity of the Fe₂O₃ nanoparticles is attributed to the extra lithium storage due to the enhanced interfacial lithium storage and reversible reaction of LiOH to form LiH and solid‐electrolyte‐interphase conversion originating from the nanoconfinement of CNTs as well as the very small particle size of the Fe@Li₂O nanograins and their good electrical contact with CNTs.     

Amorphous Carbon Coated High Grain Boundary Density Dual Phase Li4Ti5O12‐TiO2: A Nanocomposite Anode Material for Li‐Ion Batteries

This work introduces an effective, inexpensive, and large‐scale production approach to the synthesis of a carbon coated, high grain boundary density, dual phase Li₄Ti₅O₁₂‐TiO₂ nanocomposite anode material for use in rechargeable lithium‐ion batteries. The microstructure and morphology of the Li₄Ti₅O₁₂‐TiO₂‐C product were characterized systematically. The Li₄Ti₅O₁₂‐TiO₂‐C nanocomposite electrode yielded good electrochemical performance in terms of high capacity (166 mAh g^?1 at a current density of 0.5 C), good cycling stability, and excellent rate capability (110 mAh g^?1 at a current density of 10 C up to 100 cycles). The likely contributing factors to the excellent electrochemical performance of the Li₄Ti₅O₁₂‐TiO₂‐C nanocomposite could be related to the improved morphology, including the presence of high grain boundary density among the nanoparticles, carbon layering on each nanocrystal, and grain boundary interface areas embedded in a carbon matrix, where electronic transport properties were tuned by interfacial design and by varying the spacing of interfaces down to the nanoscale regime, in which the grain boundary interface embedded carbon matrix can store electrolyte and allows more channels for the Li+ ion insertion/extraction reaction. This research suggests that carbon‐coated dual phase Li₄Ti₅O₁₂‐TiO₂ nanocomposites could be suitable for use as a high rate performance anode material for lithium‐ion batteries.     

Formation of Uniform N‐doped Carbon‐Coated SnO2 Submicroboxes with Enhanced Lithium Storage Properties

Rational design and preparation of SnO₂‐based materials with superior electrochemical performance for lithium‐ion batteries are highly desirable. In this work, the synthesis of SnO₂/nitrogen‐doped carbon (SnO₂/NC) submicroboxes with excellent lithium storage properties is reported. The as‐synthesized SnO₂/NC submicroboxes are highly porous with a high specific surface area of 125 m² g^?1, well‐defined hollow structure (around 400 nm in size) with a shell thickness of 40 nm, and ultrasmall SnO₂ nanoparticles uniformly coated with nitrogen‐doped carbon layer. As a result, the SnO₂/NC submicroboxes show outstanding electrochemical performance as an anode material for lithium‐ion batteries. A high reversible capacity of 491 mAh g^?1 can be retained after 100 cycles at a current density of 0.5 A g^?1.     

Confining Ultrathin 2D Superlattices in Mesoporous Hollow Spheres Renders Ultrafast and High‐Capacity Na‐Ion Storage

Sodium‐ion batteries have attracted ever‐increasing attention in view of the natural abundance of sodium resources. Sluggish sodiation kinetics, nevertheless, remain a tough challenge, in terms of achieving high rate capability and high energy density. Herein, a sheet‐in‐sphere nanoconfiguration of 2D titania–carbon superlattices vertically aligned inside of mesoporous TiO₂@C hollow nanospheres is constructed. In such a design, the ultrathin 2D superlattices consist of ordered alternating monolayers of titania and carbon, enabling interpenetrating pathways for rapid transport of electrons and Na⁺ ions as well as a 2D heterointerface for Na⁺ storage. Kinetics analysis discloses that the combination of 2D heterointerface and mesoporosity results an intercalation pseudocapacitive charge storage mechanism, which triggers ultrafast sodiation kinetics. In situ transmission electron microscope imaging and in situ synchrotron X‐ray diffraction techniques elucidate that the sheet‐in‐sphere architecture can maintain robust mechanical and crystallographic structural stability, resulting an extraordinary high rate capability, remarkable stable cycling with a low capacity fading ratio of 0.04% per cycle over 500 cycles at 0.2 C, and exceptionally long‐term cyclability up to 20 000 cycles at 50 C. This study offers a method for the realization of a high power density and long‐term cyclability battery by designing of a hierarchical nanoarchitecture.     

Fabrication of Hierarchical Potassium Titanium Phosphate Spheroids: A Host Material for Sodium‐Ion and Potassium‐Ion Storage

Identifying suitable electrode materials for sodium‐ion and potassium‐ion storage holds the key to the development of earth‐abundant energy‐storage technologies. This study reports an anode material based on self‐assembled hierarchical spheroid‐like KTi₂(PO₄)₃@C nanocomposites synthesized via an electrospray method. Such an architecture synergistically combines the advantages of the conductive carbon network and allows sufficient space for the infiltration of the electrolyte from the porous structure, leading to an impressive electrochemical performance, as reflected by the high reversible capacity (283.7 mA h g^?1 for Na‐ion batteries; 292.7 mA h g^?1 for K‐ion batteries) and superior rate capability (136.1 mA h g^?1 at 10 A g^?1 for Na‐ion batteries; 133.1 mA h g^?1 at 1 A g^?1 for K‐ion batteries) of the resulting material. Moreover, the different ion diffusion behaviors in the two systems are revealed to account for the difference in rate performance. These findings suggest that KTi₂(PO₄)₃@C is a promising candidate as an anode material for sodium‐ion and potassium‐ion batteries. In particular, the present synthetic approach could be extended to other functional electrode materials for energy‐storage materials.     

Yolk–Shell NiS2 Nanoparticle‐Embedded Carbon Fibers for Flexible Fiber‐Shaped Sodium Battery

Fiber‐shaped rechargeable batteries hold promise as the next‐generation energy storage devices for wearable electronics. However, their application is severely hindered by the difficulty in fabrication of robust fiber‐like electrodes with promising electrochemical performance. Herein, yolk–shell NiS₂ nanoparticles embedded in porous carbon fibers (NiS₂?PCF) are successfully fabricated and developed as high‐performance fiber electrodes for sodium storage. Benefiting from the robust embedded structure, 3D porous and conductive carbon network, and yolk–shell NiS₂ nanoparticles, the as‐prepared NiS₂?PCF fiber electrode achieves a high reversible capacity of about 679 mA h g^?1 at 0.1 C, outstanding rate capability (245 mA h g^?1 at 10 C), and ultrastable cycle performance with 76% capacity retention over 5000 cycles at 5 C. Notably, a flexible fiber‐shaped sodium battery is assembled, and high reversible capacity is kept at different bending states. This work offers a new electrode‐design paradigm toward novel carbon fiber electrodes embedded with transition metal oxides/sulfides/phosphides for application in flexible energy storage devices.     

An Efficient Separator with Low Li‐Ion Diffusion Energy Barrier Resolving Feeble Conductivity for Practical Lithium–Sulfur Batteries

Due to unprecedented features including high‐energy density, low cost, and light weight, lithium–sulfur batteries have been proposed as a promising successor of lithium‐ion batteries. However, unresolved detrimental low Li‐ion transport rates in traditional carbon materials lead to large energy barrier in high sulfur loading batteries, which prevents the lithium–sulfur batteries from commercialization. In this report, to overcome the challenge of increasing both the cycling stability and areal capacity, a metallic oxide composite (NiCo₂O₄@rGO) is designed to enable a robust separator with low energy barrier for Li‐ion diffusion and simultaneously provide abundant active sites for the catalytic conversion of the polar polysulfides. With a high sulfur‐loading of 6 mg cm^?2 and low sulfur/electrolyte ratio of 10, the assembled batteries deliver an initial capacity of 5.04 mAh cm^?2 as well as capacity retention of 92% after 400 cycles. The metallic oxide composite NiCo₂O₄@rGO/PP separator with low Li‐ion diffusion energy barrier opens up the opportunity for lithium–sulfur batteries to achieve long‐cycle, cost‐effective operation toward wide applications in electric vehicles and electronic devices.     

Advanced Energy‐Storage Architectures Composed of Spinel Lithium Metal Oxide Nanocrystal on Carbon Textiles

Current battery technologies are known to suffer from kinetic problems associated with the solid‐state diffusion of Li⁺ in intercalation electrodes materials. Not only the use of nanostructure materials but also the design of electrode architectures can lead to more advanced properties. Here, advanced electrode architectures consisting of carbon textiles conformally covered by Li₄Ti₅O₁₂ nanocrystal are rationally designed and synthesized for lithium ion batteries. The efficient two‐step synthesis involves the growth of ultrathin TiO₂ nanosheets on carbon textiles, and subsequent conversion into spinel Li₄Ti₅O₁₂ through chemical lithiation. Importantly, this novel approach is simple and general, and it is used to successfully produce LiMn₂O₄/carbon composites textiles, one of the leading cathode materials for lithium ion batteries. The resulting 3D textile electrode, with various advantages including the direct electronic pathway to current collector, the easy access of electrolyte ions, the reduced Li⁺/e^? diffusion length, delivers excellent rate capability and good cyclic stability over the Li‐ion batteries of conventional configurations.     

Conductive Copper Niobate: Superior Li+‐Storage Capability and Novel Li+‐Transport Mechanism

Niobates with shear ReO₃ crystal structures are remarkably promising anode materials for Li⁺ batteries due to their large capacities, inherent safety, and high cycling stability. However, they generally suffer from limited rate capabilities rooted in their insufficient electronic and Li⁺ conductivities. Here, micrometer‐sized copper niobate (Cu₂Nb₃₄O₈₇) bulk as a new anode material having a high electronic conductivity of 2.1 × 10^?5 S cm^?1 and an impressive average Li⁺ diffusion coefficient of ≈3.5 × 10^?13 cm² s^?1 is exploited, which synergistically leads to an excellent rate capability (184 mAh g^?1 at 10 C) while remaining a large reversible capacity and superior cycling stability. Moreover, the fast Li⁺ transport pathways of grain boundary (micrometer scale) → lattice deformation area (nanometer scale) → (010) crystallographic plane (angstrom scale) are demonstrated in Cu₂Nb₃₄O₈₇. Therefore, these results could pave the way for practical application of Cu₂Nb₃₄O₈₇ in high‐performance Li⁺ batteries.     

Double‐Shelled NiO‐NiCo2O4 Heterostructure@Carbon Hollow Nanocages as an Efficient Sulfur Host for Advanced Lithium–Sulfur Batteries

Double‐shelled NiO‐NiCo₂O₄ heterostructure@carbon hollow nanocages as efficient sulfur hosts are synthesized to overcome the barriers of lithium–sulfur (Li–S) batteries simultaneously. The double‐shelled nanocages can prevent the diffusion of lithium polysulfides (LiPSs) effectively. NiO‐NiCo₂O₄ heterostructure is able to promote polysulfide conversion reactions. Furthermore, the thin carbon layer outside can improve the electrical conductivity during cycling. Besides, such unique double‐shelled hollow nanocage architecture can also accommodate the volumetric effect of sulfur upon cycling. As a result, the prepared S/NiO‐NiCo₂O₄@carbon (C) electrode exhibits good rate capacities and stable cycling life up to 500 cycles at 0.5 C with a very low capacity decay rate of only ≈0.059% per cycle.     

Co–B Nanoflakes as Multifunctional Bridges in ZnCo2O4 Micro‐/Nanospheres for Superior Lithium Storage with Boosted Kinetics and Stability

Transition metal oxides hold great promise as high‐energy anodes in next‐generation lithium‐ion batteries. However, owing to the inherent limitations of low electronic/ionic conductivities and dramatic volume change during charge/discharge, it is still challenging to fabricate practically viable compacted and thick TMO anodes with satisfactory electrochemical performance. Herein, with mesoporous cobalt–boride nanoflakes serving as multifunctional bridges in ZnCo₂O₄ micro‐/nanospheres, a compacted ZnCo₂O₄/Co–B hybrid structure is constructed. Co–B nanoflakes not only bridge ZnCo₂O₄ nanoparticles and function as anchors for ZnCo₂O₄ micro‐/nanospheres to suppress the severe volume fluctuation, they also work as effective electron conduction bridges to promote fast electron transportation. More importantly, they serve as Li⁺ transfer bridges to provide significantly boosted Li⁺ diffusivity, evidenced from both experimental kinetics analysis and density functional theory calculations. The mesopores within Co–B nanoflakes help overcome the large Li⁺ diffusion barriers across 2D interfaces. As a result, the ZnCo₂O₄/Co–B electrode delivers high gravimetric/volumetric/areal capacities of 995 mAh g^?1/1450 mAh cm^?3/5.10 mAh cm^?2, respectively, with robust rate capability and long‐term cyclability. The distinct interfacial design strategy provides a new direction for designing compacted conversion‐type anodes with superior lithium storage kinetics and stability for practical applications.     

Metal–Organic Frameworks‐Derived Tunnel Structured Co3(PO4)2@C as Cathode for New Generation High‐Performance Al‐Ion Batteries

Despite great progress in aluminum ion batteries (AIBs), the commercialization and performance improvement of AIBs‐based carbon cathodes is greatly impeded by sluggish intercalation/extraction and redox kinetics due to large‐sized AlCl₄^? anions. Phosphates with tunnel channels and much larger d‐spacing than the radius of Al³⁺ could be an alternative candidate as a cathode for potential high‐performance AIBs. Herein, elaborately designed porous tunnel structured Co₃(PO₄)₂@C composites derived from ZIF‐67 as AIBs cathodes are demonstrated, showing increased active sites, high ionic mobility, and high Al³⁺ ion diffusion coefficient, leading to remarkably enhanced discharge–charge redox reaction kinetics. Furthermore, the carbon shell and porous structure performs as armor to alleviate volume change and maintain the structure integrity of the cathodes. As expected, the rationally constructed Co₃(PO₄)₂@C composite exhibits a superior capacity of 111 mA h g^?1 at a high current density of 6 A g^?1 and 151 mA h g^?1 at 2 A g^?1 after 500 cycles with capacity decay of 0.02% per cycle. This innovative strategy could be a big step forward for long‐term cycle stable AIBs and reveals significant insights into the redox reaction mechanism for high‐performance AIBs based on Al³⁺ rather than large‐sized AlCl₄^?.     

Micro‐ and Nano‐Structured Vanadium Pentoxide (V2O5) for Electrodes of Lithium‐Ion Batteries

Vanadium pentoxide (V₂O₅) has played important roles in lithium‐ion batteries due to its unique crystalline structure. To assist researchers understanding the roles this material plays, a comprehensive and critical review is conducted based on about 250 publications. Here, we report basics and applications of micro‐ and nano‐materials of V₂O₅ and V₂O₅‐based composites. The comparative and statistical analysis leads to the discovery of several interesting phenomena. The V₂O₅ electrodes with two lithium ions have a favorable capacity performance with reversible phase formation. The excellent capacity retention is displayed in the V₂O₅ electrodes with one lithium ion inserted. In the case of three lithium ions insertion, it was found that the irreversible formation of the phase ω in Li_xV₂O₅ leads to its control. In addition, effects of additives on electrode performance, circuitry models of performance, as well as reaction routes are studied. Two unprecedented concepts of the “high capacity band” and “empirical total capacity retention” are proposed though the comprehensive statistical analysis of the reviewed data. This review provides a comprehensive collection of information of state‐of‐the‐art and recent advancement in V₂O₅ and V₂O₅‐based composite materials for electrodes. Researchers could use the information to design and develop advanced electrodes for future batteries.