Na3V2(PO4)3 as the Sole Solid Energy Storage Material for Redox Flow Sodium‐Ion Battery

Redox flow batteries have considerable advantages of system scalability and operation flexibility over other battery technologies, which makes them promising for large‐scale energy storage application. However, they suffer from low energy density and consequently relatively high cost for a nominal energy output. Redox targeting–based flow batteries are employed by incorporating solid energy storage materials in the tank and present energy density far beyond the solubility limit of the electrolytes. The success of this concept relies on paring suitable redox mediators with solid materials for facilitated reaction kinetics and lean electrolyte composition. Here, a redox targeting‐based flow battery system using the NASICON‐type Na₃V₂(PO₄)₃ as a capacity booster for both the catholyte and anolyte is reported. With 10‐methylphenothiazine as the cathodic redox mediator and 9‐fluorenone as anodic redox mediator, an all‐organic single molecule redox targeting–based flow battery is developed. The anodic and cathodic capacity are 3 and 17 times higher than the solubility limit of respective electrolyte, with which a full cell can achieve an energy density up to 88 Wh L^?1. The reaction mechanism is scrutinized by operando and in‐situ X‐ray and UV–vis absorption spectroscopy. The reaction kinetics are analysed in terms of Butler–Volmer formalism.     

A Stable Vanadium Redox‐Flow Battery with High Energy Density for Large‐Scale Energy Storage

The all‐vanadium redox flow battery is a promising technology for large‐scale renewable and grid energy storage, but is limited by the low energy density and poor stability of the vanadium electrolyte solutions. A new vanadium redox flow battery with a significant improvement over the current technology is reported in this paper. This battery uses sulfate‐chloride mixed electrolytes, which are capable of dissolving 2.5 M vanadium, representing about a 70% increase in energy capacity over the current sulfate system. More importantly, the new electrolyte remains stable over a wide temperature range of ?5 to 50 °C, potentially eliminating the need for electrolyte temperature control in practical applications. This development would lead to a significant reduction in the cost of energy storage, thus accelerating its market penetration.     

A High‐Energy‐Density Multiple Redox Semi‐Solid‐Liquid Flow Battery

A new concept of multiple redox semi‐solid‐liquid (MRSSL) flow battery that takes advantage of active materials in both liquid and solid phases, is proposed and demonstrated. Liquid lithium iodide (LiI) electrolyte and solid sulfur/carbon (S/C) composite, forming LiI‐S/C MRSSL catholyte, are employed to demonstrate this concept. Record volumetric capacity (550 Ah L^?1_catholyte) is achieved using highly concentrated and synergistic multiple redox reactions of LiI and sulfur. The liquid LiI electrolyte is found to increase the reversible volumetric capacity of the catholyte, improve the electrochemical utilization of the S/C composite, and reduce the viscosity of catholyte. A continuous flow test is demonstrated and the influence of the flow rate on the flow battery performance is discussed. The MRSSL flow battery concept transforms inactive component into bi‐functional active species and creates synergistic interactions between multiple redox couples, offering a new direction and wide‐open opportunities to develop high‐energy‐density flow batteries.     

A Long Lifetime Aqueous Organic Solar Flow Battery

Monolithically integrated solar flow batteries (SFBs) hold promise as compact stand‐alone energy systems for off‐grid solar electrification. Although considerable research is devoted to studying and improving the round‐trip efficiency of SFBs, little attention is paid to the device lifetime. Herein, a neutral pH aqueous electrolyte SFB with robust organic redox couples and inexpensive silicon‐based photoelectrodes is demonstrated. Enabled by the excellent stability of both electrolytes and protected photoelectrodes, this SFB device exhibits not only unprecedented stable continuous cycling performance over 200 h but also a capacity utilization rate higher than 80%. Moreover, through comprehensive study on the working mechanisms of SFBs, a new theory based on instantaneous solar‐to‐output electricity efficiency toward more optimized device design is developed and a significantly improved solar‐to‐output electricity efficiency of 5.4% from single‐junction silicon photoelectrodes is realized. The design principles presented in this work for extending device lifetime and boosting round trip energy efficiency will make SFBs more competitive for off‐grid applications.     

Redox Targeting of Anatase TiO2 for Redox Flow Lithium‐Ion Batteries

Anatase TiO₂ is an extensively studied anode material for lithium‐ion batteries because of its superior capability of storing Li⁺ electrochemically. Here reversible lithium storage of TiO₂ is achieved chemically using redox targeting reactions. In the presence of a pair of redox mediators, bis(pentamethylcyclopentadienyl)cobalt (CoCp^* ₂) and cobaltocene (CoCp₂) in an electrolyte, TiO₂ and its lithiated form Li _x TiO₂ can be reduced and oxidized by CoCp^* ₂ and CoCp₂ ⁺, respectively, which accompany Li⁺ insertion and extraction, albeit without attaching the TiO₂ onto the electrode. The reversible chemical lithiation/delithiation and the involved phase transitions are unambiguously confirmed using density functional theory (DFT) calculations, UV‐vis spectroscopy, X‐ray photoelectron spectoscopy (XPS), and Raman spectroscopy. A redox flow lithium‐ion battery (RFLB) half‐cell is assembled and evaluated, which is a critical step towards the development of RFLB full cells.     

Realizing Three‐Electron Redox Reactions in NASICON‐Structured Na3MnTi(PO4)3 for Sodium‐Ion Batteries

Developing multielectron reaction electrode materials is essential for achieving high specific capacity and high energy density in secondary batteries; however, it remains a great challenge. Herein, Na₃MnTi(PO₄)₃/C hollow microspheres with an open and stable NASICON framework are synthesized by a spray‐drying‐assisted process. When applied as a cathode material for sodium‐ion batteries, the resultant Na₃MnTi(PO₄)₃/C microspheres demonstrate fully reversible three‐electron redox reactions, corresponding to the Ti^3+/4+ (≈2.1 V), Mn^2+/3+ (≈3.5 V), and Mn^3+/4+ (≈4.0 V vs Na⁺/Na) redox couples. In situ X‐ray diffraction results reveals that both solid‐solution and two‐phase electrochemical reactions are involved in the sodiation/desodiation processes. The high specific capacity (160 mAh g^?1 at 0.2 C), outstanding cyclability (≈92% capacity retention after 500 cycles at 2 C), and the facile synthesis make the Na₃MnTi(PO₄)₃/C a prospective cathode material for sodium‐ion batteries.