Inorganic CsPbI3 Perovskite Coating on PbS Quantum Dot for Highly Efficient and Stable Infrared Light Converting Solar Cells

Solution‐processed colloidal quantum dot (CQD) solar cells harvesting the infrared part of the solar spectrum are especially interesting for future use in semitransparent windows or multilayer solar cells. To improve the device power conversion efficiency (PCE) and stability of the solar cells, surface passivation of the quantum dots is vital in the research of CQD solar cells. Herein, inorganic CsPbI₃ perovskite (CsPbI₃‐P) coating on PbS CQDs with a low‐temperature, solution‐processed approach is reported. The PbS CQD solar cell with CsPbI₃‐P coating gives a high PCE of 10.5% and exhibits remarkable stability both under long‐term constant illumination and storage under ambient conditions. Detailed characterization and analysis reveal improved passivation of the PbS CQDs with the CsPbI₃‐P coating, and the results suggest that the lattice coherence between CsPbI₃‐P and PbS results in epitaxial induced growth of the CsPbI₃‐P coating. The improved passivation significantly diminishes the sub‐bandgap trap‐state assisted recombination, leading to improved charge collection and therefore higher photovoltaic performance. This work therefore provides important insight to improve the CQD passivation by coating with an inorganic perovskite ligand for photovoltaics or other optoelectronic applications.     

p‐Type CuI Islands on TiO2 Electron Transport Layer for a Highly Efficient Planar‐Perovskite Solar Cell with Negligible Hysteresis

Compact TiO₂ is widely used as an electron transport material in planar‐perovskite solar cells. However, TiO₂‐based planar‐perovskite solar cells exhibit low efficiencies due to intrinsic problems such as the unsuitable conduction band energy and low electron extraction ability of TiO₂. Herein, the planar TiO₂ electron transport layer (ETL) of perovskite solar cells is modified with ionic salt CuI via a simple one‐step spin‐coating process. The p‐type nature of the CuI islands on the TiO₂ surface leads to modification of the TiO₂ band alignment, resulting in barrier‐free contacts and increased open‐circuit voltage. It is found that the polarity of the CuI‐modified TiO₂ surface can pull electrons to the interface between the perovskite and the TiO₂, which improves electron extraction and reduces nonradiative recombination. The CuI solution concentration is varied to control the electron extraction of the modified TiO₂ ETL, and the optimized device shows a high efficiency of 19.0%. In addition, the optimized device shows negligible hysteresis, which is believed to be due to the removal of trap sites and effective electron extraction by CuI‐modified TiO₂. These results demonstrate the hitherto unknown effect of p‐type ionic salts on electron transport material.     

Di‐Spiro‐Based Hole‐Transporting Materials for Highly Efficient Perovskite Solar Cells

Hole‐transporting materials (HTMs) are essential for enabling highly efficient perovskite solar cells (PVSCs) to extract and transport the hole carriers. Among numerous HTMs that are studied so far, the single‐spiro‐based compounds are the most frequently used HTMs for achieving highly efficient PVSCs. In fact, all the new spiro‐based HTMs reported so far that render PVSCs over 20% are based on spiro[fluorene‐9,9′‐xanthene] or spiro [cyclopenta [2,1‐b:3,4b′]dithiophene‐4,9′‐fluorene] cores; therefore, there is a need to diversify the design of their structures for further improving their function and performance. In addition, the fundamental understanding of structure–performance relationships for the spiro‐based HTMs is still lagging, for example, how molecular configuration, spiro numbers, and heteroatoms in spiro‐rings impact the efficacy of HTMs. To address these needs, two novel H‐shaped HTMs, G1 and G2 based on the di‐spiro‐rings as the cores are designed and synthesized. The combined good film‐forming properties, better interactions with perovskite, slightly deeper highest occupied molecular orbital, higher mobility and conductivity, as well as more efficient charge transfer for G2 help devices reach a very impressive power conversion efficiency of 20.2% and good stability. This is the first report of demonstrating the feasibility of using di‐spiro‐based HTMs for highly efficient PVSCs.     

Efficient Perovskite Solar Cells by Reducing Interface‐Mediated Recombination: a Bulky Amine Approach

The presence of non‐radiative recombination at the perovskite surface/interface limits the overall efficiency of perovskite solar cells (PSCs). Surface passivation has been demonstrated as an efficient strategy to suppress such recombination in Si cells. Here, 1‐naphthylmethylamine iodide (NMAI) is judiciously selected to passivate the surface of the perovskite film. In contrast to the popular phenylethylammonium iodide, NMAI post‐treatment primarily leaves NMAI salt on the surface of the perovskite film. The formed NMAI layer not only efficiently decreases the defect‐assisted recombination for chemical passivation, but also retards the charge accumulation of energy level mis‐alignment for vacuum level bending and prevents minority carrier recombination due to the charge‐blocking effect. Consequently, planar PSCs with high efficiency of 21.04% and improved long‐term stability (98.9% of the initial efficiency after 3240 h) are obtained. Moreover, open‐circuit voltage as high as 1.20 V is achieved at the absorption threshold of 1.61 eV, which is among the highest reported values in planar PSCs. This work provides new insights into the passivation mechanisms of organic ammonium salts and suggests future guidelines for developing improved passivation layers.     

Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells

Organic‐inorganic halide perovskite materials have become a shining star in the photovoltaic field due to their unique properties, such as high absorption coefficient, optimal bandgap, and high defect tolerance, which also lead to the breathtaking increase in power conversion efficiency from 3.8% to over 22% in just seven years. Although the highest efficiency was obtained from the TiO₂ mesoporous structure, there are increasing studies focusing on the planar structure device due to its processibility for large‐scale production. In particular, the planar p‐i‐n structure has attracted increasing attention on account of its tremendous advantages in, among other things, eliminating hysteresis alongside a competitive certified efficiency of over 20%. Crucial for the device performance enhancement has been the interface engineering for the past few years, especially for such planar p‐i‐n devices. The interface engineering aims to optimize device properties, such as charge transfer, defect passivation, band alignment, etc. Herein, recent progress on the interface engineering of planar p‐i‐n structure devices is reviewed. This review is mainly focused on the interface design between each layer in p‐i‐n structure devices, as well as grain boundaries, which are the interfaces between polycrystalline perovskite domains. Promising research directions are also suggested for further improvements.     

Self‐Assembled 2D Perovskite Layers for Efficient Printable Solar Cells

2D organic–inorganic hybrid Ruddlesden–Popper perovskites have emerged recently as candidates for the light‐absorbing layer in solar cell technology due largely to their impressive operational stability compared with their 3D‐perovskite counterparts. The methods reported to date for the preparation of efficient 2D perovksite layers for solar cells involve a nonscalable spin‐coating step. In this work, a facile, spin‐coating‐free, directly scalable drop‐cast method is reported for depositing precursor solutions that self‐assemble into highly oriented, uniform 2D‐perovskite films in air, yielding perovskite solar cells with power conversion efficiencies (PCE) of up to 14.9% (certified PCE of 14.33% ± 0.34 at 0.078 cm²). This is the highest PCE to date for a solar cell with 2D‐perovskite layers fabricated by nonspin‐coating method. The PCEs of the cells display no evidence of degradation after storage in a nitrogen glovebox for more than 5 months. 2D‐perovskite layer deposition using a slot‐die process is also investigated for the first time. Perovskite solar cells fabricated using batch slot‐die coating on a glass substrate or R2R slot‐die coating on a flexible substrate produced PCEs of 12.5% and 8.0%, respectively.     

Aligned and Graded Type‐II Ruddlesden–Popper Perovskite Films for Efficient Solar Cells

Recently, Ruddlesden–Popper perovskites (RPPs) have attracted increasing interests due to their promising stability. However, the efficiency of solar cells based on RPPs is much lower than that based on 3D perovskites, mainly attributed to their poor charge transport. Herein, a simple yet universal method for controlling the quality of RPP films by a synergistic effect of two additives in the precursor solution is presented. RPP films achieved by this method show (a) high quality with uniform morphology, enhanced crystallinity, and reduced density of sub‐bandgap states, (b) vertically oriented perovskite frameworks that facilitate efficient charge transport, and (c) type‐II band alignment that favors self‐driven charge separation. Consequently, a hysteresis‐free RPP solar cell with a power conversion efficiency exceeding 12%, which is much higher than that of the control device (1.5%), is achieved. The findings will spur new developments in the fabrication of high‐quality, aligned, and graded RPP films essential for realizing efficient and stable perovskite solar cells.     

Barrier Designs in Perovskite Solar Cells for Long‐Term Stability

Perovskite solar cells (PSCs) have attracted much attention in the past decade and their power conversion efficiency has been rapidly increasing to 25.2%, which is comparable with commercialized solar cells. Currently, the long‐term stability of PSCs remains as a major bottleneck impeding their future commercial applications. Beyond strengthening the perovskite layer itself and developing robust external device encapsulation/packaging technology, integration of effective barriers into PSCs has been recognized to be of equal importance to improve the whole device’s long‐term stability. These barriers can not only shield the critical perovskite layer and other functional layers from external detrimental factors such as heat, light, and H₂O/O₂, but also prevent the undesired ion/molecular diffusion/volatilization from perovskite. In addition, some delicate barrier designs can simultaneously improve the efficiency and stability. In this review article, the research progress on barrier designs in PSCs for improving their long‐term stability is reviewed in terms of the barrier functions, locations in PSCs, and material characteristics. Regarding specific barriers, their preparation methods, chemical/photoelectronic/mechanical properties, and their role in device stability, are further discussed. On the basis of these accumulative efforts, predictions for the further development of effective barriers in PSCs are provided at the end of this review.     

Structurally Reconstructed CsPbI2Br Perovskite for Highly Stable and Square‐Centimeter All‐Inorganic Perovskite Solar Cells

Although all‐inorganic perovskite solar cells (PSCs) demonstrate high thermal stability, cesium‐lead halide perovskites with high iodine content suffer from poor stability of the black phase (α‐phase). In this study, it is demonstrated that incorporating InCl₃ into the host perovskite lattice helps to inhibit the formation of yellow phase (δ‐phase) perovskite and thereby enhances the long‐term ambient stability. The enhanced stability is achieved by a strategy for the structural reconstruction of CsPbI₂Br perovskite by means of In³⁺ and Cl^? codoping, which gives rise to a significant improvement in the overall spatial symmetry with a closely packed atom arrangement due to the crystal structure transformation from orthorhombic (Pnma) to cubic (Pm‐3m). In addition, a novel thermal radiation heating method that further improves the uniformity of the perovskite thin films is presented. This approach enables the construction of all‐inorganic InCl₃:CsPbI₂Br PSCs with a champion power conversion efficiency of 13.74% for a small‐area device (0.09 cm²) and 11.4% for a large‐area device (1.00 cm²).     

Phase Segregation Enhanced Ion Movement in Efficient Inorganic CsPbIBr2 Solar Cells

Organic–inorganic hybrid perovskite solar cells with mixed cations and mixed halides have achieved impressive power conversion efficiency of up to 22.1%. Phase segregation due to the mixed compositions has attracted wide concerns, and their nature and origin are still unclear. Some very useful analytical techniques are controversial in microstructural and chemical analyses due to electron beam‐induced damage to the “soft” hybrid perovskite materials. In this study photoluminescence, cathodoluminescence, and transmission electron microscopy are used to study charge carrier recombination and retrieve crystallographic and compositional information for all‐inorganic CsPbIBr₂ films on the nanoscale. It is found that under light and electron beam illumination, “iodide‐rich” CsPbI_{(1+x )}Br_{(2?x )} phases form at grain boundaries as well as segregate as clusters inside the film. Phase segregation generates a high density of mobile ions moving along grain boundaries as ion migration “highways.” Finally, these mobile ions can pile up at the perovskite/TiO₂ interface resulting in formation of larger injection barriers, hampering electron extraction and leading to strong current density–voltage hysteresis in the polycrystalline perovskite solar cells. This explains why the planar CsPbIBr₂ solar cells exhibit significant hysteresis in efficiency measurements, showing an efficiency of up to 8.02% in the reverse scan and a reduced efficiency of 4.02% in the forward scan, and giving a stabilized efficiency of 6.07%.     

Highly Efficient Perovskite Solar Cells Enabled by Multiple Ligand Passivation

In the past decade, the efficiency of perovskite solar cells quickly increased from 3.8% to 25.2%. The quality of perovskite films plays vital role in device performance. The films fabricated by solution‐process are usually polycrystalline, with significantly higher defect density than that of single crystal. One kind of defect in the films is uncoordinated Pb²⁺, which is usually generated during thermal annealing process due to the volatile organic component. Another detrimental kind of defect is Pb⁰, which is often observed during the film fabrication process or solar cell operation. Because the open circuit voltage has a close relation with the defect density, it is thus desirable to passivate these two kinds of defects. Here, a molecule with multiple ligands is introduced, which not only passivates the uncoordinated Pb²⁺ defects, but also suppresses the formation of Pb⁰ defects. Meanwhile, such a treatment improves the energy level alignment between the valence band of perovskite and the highest occupied molecular orbital of spiro‐OMeTAD. As a result, the performance of perovskite solar cells significantly increases from 19.0% to 21.4%.     

Inorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells

Recently, the stability of organic–inorganic perovskite thin films under thermal, photo, and moisture stresses has become a major concern for further commercialization due to the high volatility of the organic cations in the prototype perovskite composition (CH₃NH₃PbI₃). All inorganic cesium (Cs) based perovskite is an alternative to avoid the release or decomposition of organic cations. Moreover, substituting Pb with Sn in the organic–inorganic lead halide perovskites has been demonstrated to narrow the bandgap to 1.2–1.4 eV for high‐performance perovskite solar cells. In this work, a series of CsPb_1?xSn_xIBr₂ perovskite alloys via one‐step antisolvent method is demonstrated. These perovskite films present tunable bandgaps from 2.04 to 1.64 eV. Consequently, the CsPb_0.75Sn_0.25IBr₂ with homogeneous and densely crystallized morphology shows a remarkable power conversion efficiency of 11.53% and a high V_oc of 1.21 V with a much improved phase stability and illumination stability. This work provides a possibility for designing and synthesizing novel inorganic halide perovskites as the next generation of photovoltaic materials.     

Toward Long‐Term Stable and Highly Efficient Perovskite Solar Cells via Effective Charge Transporting Materials

Perovskite solar cells (PSCs) have advanced quickly with their power conversion efficiency approaching the record of silicon solar cells. However, there is still a big challenge to obtain both high efficiency and long‐term stability for future commercialization of PSCs. The major instability issue is associated with the decomposition or phase transition of perovskite materials that are believed to be intrinsically unstable under outdoor working conditions. Herein, the authors review the approaches that marked important progress in developing new functional electron/hole transporting materials that enabled highly efficient and stable PSCs. The findings that accelerate charge diffusion and that suppress the irrevocable loss of ions diffusing out of perovskite materials and other diffusion processes are highlighted. In addition, derivative interface engineering methods to control the diffusion process of charges/ions/molecules are also reviewed. Finally, the authors propose key research issues in charge transporting materials and interface engineering with regard to the important diffusion processes that will be one of the keys to realize highly efficient and long‐term stable PSCs.