Mn‐Rich P′2‐Na0.67[Ni0.1Fe0.1Mn0.8]O2 as High‐Energy‐Density and Long‐Life Cathode Material for Sodium‐Ion Batteries

Herein, P′2‐type Na_0.67[Ni_0.1Fe_0.1Mn_0.8]O₂ is introduced as a promising new cathode material for sodium‐ion batteries (SIBs) that exhibits remarkable structural stability during repetitive Na⁺ de/intercalation. The O? Ni? O? Mn? O? Fe? O bond in the octahedra of transition‐metal layers is used to suppress the elongation of the Mn? O bond and to improve the electrochemical activity, leading to the highly reversible Na storage mechanism. A high discharge capacity of ≈220 mAh g^?1 (≈605 Wh kg^?1) is delivered at 0.05 C (13 mAg^?1) with a high reversible capacity of ≈140 mAh g^?1 at 3 C and excellent capacity retention of 80% over 200 cycles. This performance is associated with the reversible P′2–OP4 phase transition and small volume change upon charge and discharge (≈3%). The nature of the sodium storage mechanism in a full cell paired with a hard carbon anode reveals an unexpectedly high energy density of ≈542 Wh kg^?1 at 0.2 C and good capacity retention of ≈81% for 500 cycles at 1 C (260 mAg^?1).     

P2‐K0.75[Ni1/3Mn2/3]O2 Cathode Material for High Power and Long Life Potassium‐Ion Batteries

Rationally designed P2‐K_0.75[Ni_1/3Mn_2/3]O₂ is introduced as a novel cathode material for potassium‐ion batteries (KIBs). P2‐K_0.75[Ni_1/3Mn_2/3]O₂ cathode material designed through electrochemical ion‐exchange from P2‐Na_2/3[Ni_1/3Mn_2/3]O₂ exhibits satisfactory electrode performances; 110 mAh g^?1 (20 mA g^?1) retaining 86% of capacity for 300 cycles and unexpectedly high reversible capacity of about 91 mAh g^?1 (1400 mA g^?1) with excellent capacity retention of 83% over 500 cycles. According to theoretical and experimental investigations, the overall potassium storage mechanism of P2‐K_0.75[Ni_1/3Mn_2/3]O₂ is revealed to be a single‐phase reaction with small lattice change upon charge and discharge, presenting the Ni^4+/2+ redox couple reaction. Such high power capability is possible through the facile K⁺ migration in the K_0.75[Ni_1/3Mn_2/3]O₂ structure with a low activation barrier energy of ≈210 meV. These findings indicate that P2‐K_0.75[Ni_1/3Mn_2/3]O₂ is a promising candidate cathode material for high‐rate and long‐life KIBs.     

Layered Na‐Ion Cathodes with Outstanding Performance Resulting from the Synergetic Effect of Mixed P‐ and O‐Type Phases

Herein, the synthesis of new quaternary layered Na‐based oxides of the type Na_xMn_yNi_zFe_0.1Mg_0.1O₂ (0.67≤ x ≤ 1.0; 0.5≤ y ≤ 0.7; 0.1≤ z ≤ 0.3) is described. The synthesis can be tuned to obtain P2‐ and O3‐type as well as mixed P‐/O‐type phases as demonstrated by structural, morphological, and electrochemical properties characterization. Although all materials show good electrochemical performance, the simultaneous presence of the P‐ and O‐type phases is found to have a synergetic effect resulting in outstanding performance of the mixed phase material as a sodium‐ion cathode. The mixed P3/P2/O3‐type material, having an average elemental composition of Na_0.76Mn_0.5Ni_0.3Fe_0.1Mg_0.1O₂, overcomes the specific drawbacks associated with the P2‐ and O3‐type materials, allowing the outstanding electrochemical performance. In detail, the mixed phase material is able to deliver specific discharge capacities of up to 155 mAh g^?1 (18 mA g^?1) in the potential range of 2.0–4.3 V. In the narrower potential range of 2.5–4.3 V the material exhibits high average discharge potential (3.4 V versus Na/Na⁺), exceptional average coulombic efficiencies (>99.9%), and extraordinary capacity retention (90.2% after 601 cycles). The unexplored class of P‐/O‐type mixed phases introduces new perspectives for the development of layered positive electrode materials and powerful Na‐ion batteries.     

High‐Voltage Oxygen‐Redox‐Based Cathode for Rechargeable Sodium‐Ion Batteries

Recently, anionic‐redox‐based materials have shown promising electrochemical performance as cathode materials for sodium‐ion batteries. However, one of the limiting factors in the development of oxygen‐redox‐based electrodes is their low operating voltage. In this study, the operating voltage of oxygen‐redox‐based electrodes is raised by incorporating nickel into P2‐type Na_2/3[Zn_0.3Mn_0.7]O₂ in such a way that the zinc is partially substituted by nickel. As designed, the resulting P2‐type Na_2/3[(Ni_0.5Zn_0.5)_0.3Mn_0.7]O₂ electrode exhibits an average operating voltage of 3.5 V and retains 95% of its initial capacity after 200 cycles in the voltage range of 2.3–4.6 V at 0.1C (26 mA g^?1). Operando X‐ray diffraction analysis reveals the reversible phase transition: P2 to OP4 phase on charge and recovery to the P2 phase on discharge. Moreover, ex situ X‐ray absorption near edge structure and X‐ray photoelectron spectroscopy studies reveal that the capacity is generated by the combination of Ni²⁺/Ni⁴⁺ and O^2?/O^1? redox pairs, which is supported by first‐principles calculations. It is thought that this kind of high voltage redox species combined with oxygen redox could be an interesting approach to further increase energy density of cathode materials for not only sodium‐based rechargeable batteries, but other alkali‐ion battery systems.     

High Performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 Cathode for Sodium‐Ion Batteries

The synthesis of a new layered cathode material, Na_0.5[Ni_0.23Fe_0.13Mn_0.63]O₂, and its characterization in terms of crystalline structure and electrochemical performance in a sodium cell is reported. X‐ray diffraction studies and high resolution scanning electron microscopy images reveal a well‐defined P2‐type layered structure, while the electrochemical tests demonstrate excellent characteristics in terms of high capacity and cycle life. This performance, the low cost, and the environmental compatibility of its component poses Na_0.5[Ni_0.23Fe_0.13Mn_0.63]O₂ to be among the most promising materials for the next generation of sodium‐ion batteries.     

Fe‐Based Tunnel‐Type Na0.61[Mn0.27Fe0.34Ti0.39]O2 Designed by a New Strategy as a Cathode Material for Sodium‐Ion Batteries

Sodium‐ion batteries are promising for grid‐scale storage applications due to the natural abundance and low cost of sodium. However, few electrodes that can meet the requirements for practical applications are available today due to the limited routes to exploring new materials. Here, a new strategy is proposed through partially/fully substituting the redox couple of existing negative electrodes in their reduced forms to design the corresponding new positive electrode materials. The power of this strategy is demonstrated through the successful design of new tunnel‐type positive electrode materials of Na_0.61[Mn_0.61‐xFe_xTi_0.39]O₂, composed of non‐toxic and abundant elements: Na, Mn, Fe, Ti. In particular, the designed air‐stable Na_0.61[Mn_0.27Fe_0.34Ti_0.39]O₂ shows a usable capacity of ≈90 mAh g^?1, registering the highest value among the tunnel‐type oxides, and a high storage voltage of 3.56 V, corresponding to the Fe³⁺/Fe⁴⁺ redox couple realized for the first time in non‐layered oxides, which was confirmed by X‐ray absorption spectroscopy and Mössbauer spectroscopy. This new strategy would open an exciting route to explore electrode materials for rechargeable batteries.     

A Stable Layered Oxide Cathode Material for High‐Performance Sodium‐Ion Battery

As one of the most promising cathode candidates for room‐temperature sodium‐ion batteries (SIBs), P2‐type layered oxides face the challenge of simultaneously realizing high‐rate performance while achieving long cycle life. Here, a stable Na_2/3Ni_1/6Mn_2/3Cu_1/9Mg_1/18O₂ cathode material is proposed that consists of multiple‐layer oriented stacking nanoflakes, in which the nickel sites are partially substituted by copper and magnesium, a characteristic of the material that is confirmed by multiscale scanning transmission electron microscopy and electron energy loss spectroscopy techniques. Owing to the optimal morphology structure modulation and chemical element substitution strategy, the electrode displays remarkable rate performance (73% capacity retention at 30C compared to 0.5C) and outstanding cycling stability in Na half‐cell system couple with unprecedented full battery performance. The underlying thermal stability, phase stability, and Na⁺ storage mechanisms are clearly elucidated through the systematical characterizations of electrochemical behaviors, in situ X‐ray diffraction at different temperatures, and operando X‐ray diffraction upon Na⁺ deintercalation/intercalation. Surprisingly, a quasi‐solid‐solution reaction is switched to an absolute solid‐solution reaction and a capacitive Na⁺ storage mechanism is demonstrated via quantitative electrochemical kinetics calculation during charge/discharge process. Such a simple and effective strategy might reveal a new avenue into the rational design of excellent rate capability and long cycle stability cathode materials for practical SIBs.     

Bioinspired Surface Layer for the Cathode Material of High‐Energy‐Density Sodium‐Ion Batteries

Cathode materials are usually active in the range of 2–4.3 V, but the decomposition of the electrolytic salt above 4 V versus Na⁺/Na is common. Arguably, the greatest concern is the formation of HF after the reaction of the salts with water molecules, which are present as an impurity in the electrolyte. This HF ceaselessly attacks the active materials and gradually causes the failure of the electrode via electric isolation of the active materials. In this study, a bioinspired β‐NaCaPO₄ nanolayer is reported on a P2‐type layered Na_2/3[Ni_1/3Mn_2/3]O₂ cathode material. The coating layers successfully scavenge HF and H₂O, and excellent capacity retention is achieved with the β‐NaCaPO₄‐coated Na_2/3[Ni_1/3Mn_2/3]O₂ electrode. This retention is possible because a less acidic environment is produced in the Na cells during prolonged cycling. The intrinsic stability of the coating layer also assists in delaying the exothermic decomposition reaction of the desodiated electrodes. Formation and reaction mechanisms are suggested for the coating layers responsible for the excellent electrode performance. The suggested technology is promising for use with cathode materials in rechargeable sodium batteries to mitigate the effects of acidic conditions in Na cells.     

Controlled Oxygen Redox for Excellent Power Capability in Layered Sodium‐Based Compounds

A high‐rate of oxygen redox assisted by cobalt in layered sodium‐based compounds is achieved. The rationally designed Na_0.6[Mg_0.2Mn_0.6Co_0.2]O₂ exhibits outstanding electrode performance, delivering a discharge capacity of 214 mAh g^?1 (26 mA g^?1) with capacity retention of 87% after 100 cycles. High rate performance is also achieved at 7C (1.82 A g^?1) with a capacity of 107 mAh g^?1. Surprisingly, the Na_0.6[Mg_0.2Mn_0.6Co_0.2]O₂ compound is able to deliver capacity for 1000 cycles at 5C (at 1.3 A g^?1), retaining 72% of its initial capacity of 108 mAh g^?1. X‐ray absorption spectroscopy analysis of the O K‐edge indicates the oxygen‐redox species (O^2?/1?) is active during cycling. First‐principles calculations show that the addition of Co reduces the bandgap energy from ≈2.65 to ≈0.61 eV and that overlapping of the Co 3d and O 2p orbitals facilitates facile electron transfer, enabling the long‐term reversibility of the oxygen redox, even at high rates. To the best of the authors' knowledge, this is the first report on high‐rate oxygen redox in sodium‐based cathode materials, and it is believed that the findings will open a new pathway for the use of oxygen‐redox‐based materials for sodium‐ion batteries.     

Cobalt‐Free High‐Capacity Ni‐Rich Layered Li[Ni0.9Mn0.1]O2 Cathode

Li[Ni_0.9Co_0.1]O₂ (NC90), Li[Ni_0.9Co_0.05Mn_0.05]O₂ (NCM90), and Li[Ni_0.9Mn_0.1]O₂ (NM90) cathodes are synthesized for the development of a Co‐free high‐energy‐density cathode. NM90 maintains better cycling stability than the two Co‐containing cathodes, particularly under harsh cycling conditions (a discharge capacity of 236 mAh g^?1 with a capacity retention of 88% when cycled at 4.4 V under 30 °C and 93% retention when cycled at 4.3 V under 60 °C after 100 cycles). The reason for the enhanced stability is mainly the ability of NM90 to absorb the strain associated with the abrupt anisotropic lattice contraction/extraction and to suppress the formation of microcracks, in addition to enhanced chemical stability from the increased presence of stable Mn⁴⁺. Although the absence of Co deteriorates the rate capability, this can be overcome as the rate capability of the NM90 approaches that of the NCM90 when cycled at 60 °C. The long‐term cycling stability of NM90 is confirmed in a full cell, demonstrating that it is one of the most promising Co‐free cathodes for high‐energy‐density applications. This study not only provides insight into redefining the role of Mn in a Ni‐rich cathode, it also represents a clear breakthrough in achieving a commercially viable Co‐free Ni‐rich layered cathode.     

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Ni‐rich Li[Ni_xCo_yMn_1?x?y]O₂ (x ≥ 0.8) layered oxides are the most promising cathode materials for lithium‐ion batteries due to their high reversible capacity of over 200 mAh g^?1. Unfortunately, the anisotropic properties associated with the α‐NaFeO₂ structured crystal grains result in poor rate capability and insufficient cycle life. To address these issues, a micrometer‐sized Ni‐rich LiNi_0.8Co_0.1Mn_0.1O₂ secondary cathode material consisting of radially aligned single‐crystal primary particles is proposed and synthesized. Concomitant with this unique crystallographic texture, all the exposed surfaces are active {010} facets, and 3D Li⁺ ion diffusion channels penetrate straightforwardly from surface to center, remarkably improving the Li⁺ diffusion coefficient. Moreover, coordinated charge–discharge volume change upon cycling is achieved by the consistent crystal orientation, significantly alleviating the volume‐change‐induced intergrain stress. Accordingly, this material delivers superior reversible capacity (203.4 mAh g^?1 at 3.0–4.3 V) and rate capability (152.7 mAh g^?1 at a current density of 1000 mA g^?1). Further, this structure demonstrates excellent cycling stability without any degradation after 300 cycles. The anisotropic morphology modulation provides a simple, efficient, and scalable way to boost the performance and applicability of Ni‐rich layered oxide cathode materials.     

Microstructure‐Controlled Ni‐Rich Cathode Material by Microscale Compositional Partition for Next‐Generation Electric Vehicles

A multicompositional particulate Li[Ni_0.9Co_0.05Mn_0.05]O₂ cathode in which Li[Ni_0.94Co_0.038Mn_0.022]O₂ at the particle center is encapsulated by a 1.5 µm thick concentration gradient (CG) shell with the outermost surface composition Li[Ni_0.841Co_0.077Mn_0.082]O₂ is synthesized using a differential coprecipitation process. The microscale compositional partitioning at the particle level combined with the radial texturing of the refined primary particles in the CG shell layer protracts the detrimental H2 → H3 phase transition, causing sharp changes in the unit cell dimensions. This protraction, confirmed by in situ X‐ray diffraction and transmission electron microscopy, allows effective dissipation of the internal strain generated upon the H2 → H3 phase transition, markedly improving cycling performance and thermochemical stability as compared to those of the conventional single‐composition Li[Ni_0.9Co_0.05Mn_0.05]O₂ cathodes. The compositionally partitioned cathode delivers a discharge capacity of 229 mAh g^?1 and exhibits capacity retention of 88% after 1000 cycles in a pouch‐type full cell (compared to 68% for the conventional cathode). Thus, the proposed cathode material provides an opportunity for the rational design and development of a wide range of multifunctional cathodes, especially for Ni‐rich Li[Ni_xCo_yMn_1‐x‐y]O₂ cathodes, by compositionally partitioning the cathode particles and thus optimizing the microstructural response to the internal strain produced in the deeply charged state.     

New O2/P2‐type Li‐Excess Layered Manganese Oxides as Promising Multi‐Functional Electrode Materials for Rechargeable Li/Na Batteries

A new and promising P2‐type layered oxide, Na_5/6[Li_1/4Mn_3/4]O₂ is prepared using a solid‐state method. Detailed crystal structures of the sample are analyzed by synchrotron X‐ray diffraction combined with high‐resolution neutron diffraction. P2‐type Na_5/6[Li_1/4Mn_3/4]O₂ consists of two MeO₂ layers with partial in‐plane √3a × √3a‐type Li/Mn ordering. Na/Li ion‐exchange in a molten salt results in a phase transition accompanied with glide of [Li_1/4Mn_3/4]O₂ layers without the destruction of in‐plane cation ordering. P2‐type Na_5/6[Li_1/4Mn_3/4]O₂ translates into an O2‐type layered structure with staking faults as the result of ion‐exchange. Electrode performance of P2‐type Na_5/6[Li_1/4Mn_3/4]O₂ and O2‐type Li_x[Li_1/4Mn_3/4]O₂ is examined and compared in Na and Li cells, respectively. Both samples show large reversible capacity, ca. 200 mA h g^?1, after charge to high voltage regardless of the difference in charge carriers. Structural analysis suggests that in‐plane structural rearrangements, presumably associated with partial oxygen loss, occur in both samples after charge to a high‐voltage region. Such structural activation process significantly influences electrode performance of the P2/O2‐type phases, similar to O3‐type Li₂MnO₃‐based materials. Crystal structures, phase‐transition mechanisms, and the possibility of the P2/O2‐type phases as high‐capacity and long‐cycle‐life electrode materials with the multi‐functionality for both rechargeable Li/Na batteries are discussed in detail.     

Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries

Searching for a new material to build the next‐generation rechargeable lithium‐ion batteries (LIBs) with high electrochemical performance is urgently required. Owing to the low‐cost, non‐toxicity, and high‐safety, the family of manganese oxide including the Na‐Mn‐O system is regarded as one of the most promising electrode materials for LIBs. Herein, a new strategy is carried out to prepare a highly porous and electrochemically active Na_0.55Mn₂O₄·1.5H₂O (SMOH) compound. As an anode material, the Na‐Mn‐O nanocrystal material dispersed within a carbon matrix manifests a high reversible capacity of 1015.5 mA h g^?1 at a current density of 0.1 A g^?1. Remarkably, a considerable capability of 546.8 mA h g^?1 remains even after 2000 discharge/charge cycles at the higher current density of 4 A g^?1, indicating a splendid cyclability. The exceptional electrochemical properties allow SMOH to be a promising anode material toward LIBs.     

A Dual‐Insertion Type Sodium‐Ion Full Cell Based on High‐Quality Ternary‐Metal Prussian Blue Analogs

Prussian blue analogs (PBAs) are especially investigated as superior cathodes for sodium‐ion batteries (SIBs) due to high theoretical capacity (≈170 mA h g^?1) with 2‐Na storage and low cost. However, PBAs suffer poor cyclability due to irreversible phase transition in deep charge/discharge states. PBAs also suffer low crystallinity, with considerable [Fe(CN)₆] vacancies, and coordinated water in crystal frameworks. Presently, a new chelating agent/surfactant coassisted crystallization method is developed to prepare high‐quality (HQ) ternary‐metal Ni_xCo_1?x[Fe(CN)₆] PBAs. By introducing inactive metal Ni to suppress capacity fading caused by excessive lattice distortion, these PBAs have tunable limits on depth of charge/discharge. HQ‐Ni_xCo_1?x[Fe(CN)₆] (x = 0.3) demonstrates the best reversible Na‐storage behavior with a specific capacity of ≈145 mA h g^?1 and a remarkably improved cycle performance, with ≈90% capacity retention over 600 cycles at 5 C. Furthermore, a dual‐insertion full cell on the cathode and NaTi₂(PO₄)₃ anode delivers reversible capacity of ≈110 mA h g^?1 at a current rate of 1.0 C without capacity fading over 300 cycles, showing promise as a high‐performance SIB for large‐scale energy‐storage systems. The ultrastable cyclability achieved in the lab and explained herein is far beyond that of any previously reported PBA‐based full cells.     

Stress Distortion Restraint to Boost the Sodium Ion Storage Performance of a Novel Binary Hexacyanoferrate

Mn‐based hexacyanoferrate Na_xMnFe(CN)₆ (NMHFC) has been attracting more attention as a promising cathode material for sodium ion storage owing to its low cost, environmental friendliness, and its high voltage plateau of 3.6 V, which comes from the Mn²⁺/Mn³⁺ redox couple. In particular, the Na‐rich NMHFC (x > 1.40) with trigonal phase is considered an attractive candidate due to its large capacity of ≈130 mAh g^?1, delivering high energy density. Its unstable cycle life, however, is holding back its practical application due to the dissolution of Mn²⁺ and the trigonal‐cubic phase transition during the charge–discharge process. Here, a novel hexacyanoferrate (Na_1.60Mn_0.833Fe_0.167[Fe(CN)₆], NMFHFC‐1) with Na‐rich cubic structure and dual‐metal active redox couples is developed for the first time. Through multiple structural modulation, the stress distortion is minimized by restraining Mn²⁺ dissolution and the trigonal‐cubic phase transition, which are common issues in manganese‐based hexacyanoferrate. Moreover, NMFHFC‐1 simultaneously retains an abundance of Na ions in the framework. As a result, Na_1.60Mn_0.833Fe_0.167[Fe(CN)₆] electrode delivers high energy density (436 Wh kg^?1) and excellent cycle life (80.2% capacity retention over 300 cycles), paving the way for the development of novel commercial cathode materials for sodium ion storage.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.     

Chemical Synthesis of 3D Graphene‐Like Cages for Sodium‐Ion Batteries Applications

Sodium (Na) super ion conductor structured Na₃V₂(PO₄)₃ (NVP) is extensively explored as cathode material for sodium‐ion batteries (SIBs) due to its large interstitial channels for Na⁺ migration. The synthesis of 3D graphene‐like structure coated on NVP nanoflakes arrays via a one‐pot, solid‐state reaction in molten hydrocarbon is reported. The NVP nanoflakes are uniformly coated by the in situ generated 3D graphene‐like layers with the thickness of 3 nm. As a cathode material, graphene covered NVP nanoflakes exhibit excellent electrochemical performances, including close to theoretical reversible capacity (115.2 mA h g^?1 at 1 C), superior rate capability (75.9 mA h g^?1 at 200 C), and excellent cyclic stability (62.5% of capacity retention over 30000 cycles at 50 C). Furthermore, the 3D graphene‐like cages after removing NVP also serve as a good anode material and deliver a specific capacity of 242.5 mA h g^?1 at 0.1 A g^?1. The full SIB using these two cathode and anode materials delivers a high specific capacity (109.2 mA h g^?1 at 0.1 A g^?1) and good cycling stability (77.1% capacity retention over 200 cycles at 0.1 A g^?1).     

An Ion‐Exchange Promoted Phase Transition in a Li‐Excess Layered Cathode Material for High‐Performance Lithium Ion Batteries

A new approach to intentionally induce phase transition of Li‐excess layered cathode materials for high‐performance lithium ion batteries is reported. In high contrast to the limited layered‐to‐spinel phase transformation that occurred during in situ electrochemical cycles, a Li‐excess layered Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂ is completely converted to a Li₄Mn₅O₁₂‐type spinel product via ex situ ion‐exchanges and a post‐annealing process. Such a layered‐to‐spinel phase conversion is examined using in situ X‐ray diffraction and in situ high‐resolution transmission electron microscopy. It is found that generation of sufficient lithium ion vacancies within the Li‐excess layered oxide plays a critical role for realizing a complete phase transition. The newly formed spinel material exhibits initial discharge capacities of 313.6, 267.2, 204.0, and 126.3 mAh g^?1 when cycled at 0.1, 0.5, 1, and 5 C (1 C = 250 mA g^?1), respectively, and can retain a specific capacity of 197.5 mAh g^?1 at 1 C after 100 electrochemical cycles, demonstrating remarkably improved rate capability and cycling stability in comparison with the original Li‐excess layered cathode materials. This work sheds light on fundamental understanding of phase transitions within Li‐excess layered oxides. It also provides a novel route for tailoring electrochemical performance of Li‐excess layered cathode materials for high‐capacity lithium ion batteries.     

A Novel High Capacity Positive Electrode Material with Tunnel‐Type Structure for Aqueous Sodium‐Ion Batteries

Aqueous sodium‐ion batteries have shown desired properties of high safety characteristics and low‐cost for large‐scale energy storage applications such as smart grid, because of the abundant sodium resources as well as the inherently safer aqueous electrolytes. Among various Na insertion electrode materials, tunnel‐type Na_0.44MnO₂ has been widely investigated as a positive electrode for aqueous sodium‐ion batteries. However, the low achievable capacity hinders its practical applications. Here, a novel sodium rich tunnel‐type positive material with a nominal composition of Na_0.66[Mn_0.66Ti_0.34]O₂ is reported. The tunnel‐type structure of Na_0.44MnO₂ obtained for this compound is confirmed by X‐ray diffraction and atomic‐scale spherical aberration‐corrected scanning transmission electron microscopy/electron energy‐loss spectrum. When cycled as positive electrode in full cells using NaTi₂(PO₄)₃/C as negative electrode in 1 m Na₂SO₄ aqueous electrolyte, this material shows the highest capacity of 76 mAh g^?1 among the Na insertion oxides with an average operating voltage of 1.2 V at a current rate of 2 C. These results demonstrate that Na_0.66[Mn_0.66Ti_0.34]O₂ is a promising positive electrode material for rechargeable aqueous sodium‐ion batteries.