Achieving Thickness‐Insensitive Morphology of the Photoactive Layer for Printable Organic Photovoltaic Cells via Side Chain Engineering in Nonfullerene Acceptors

Although high power conversion efficiency of over 14% has been achieved using nonfullerene acceptors (NFAs) in organic photovoltaics (OPVs), securing their insensitive device performance to the thickness of the photoactive layer remains an indispensable requirement for their successful commercialization via printing technologies. In this study, by synthesizing a new series of ITIC‐based NFAs having alkyl or alkoxy groups, it is found that the bulk heterojunction morphology dependence on the thickness of the photoactive layer becomes more severe as the difference in the surface energy of the donor and acceptor increases. It is believed that this observation is the origin that yields the device performance dependence on the thickness of the photoactive layer. Through sensitive control of the surface energy of these ITIC‐based NFAs, it is demonstrated that thickness‐insensitive OPVs can be achieved even using a doctor blade technique under air without using any additives. It is believed that present approach provides an important insight into the design of photoactive materials and morphology control for the printable OPVs using NFAs.     

Interface Modification by Ionic Liquid: A Promising Candidate for Indoor Light Harvesting and Stability Improvement of Planar Perovskite Solar Cells

Organic–inorganic hybrid perovskite solar cells (PSCs) are currently attracting significant interest owing to their promising outdoor performance. However, the ability of indoor light harvesting of the perovskites and corresponding device performance are rarely reported. Here, the potential of planar PSCs in harvesting indoor light for low‐power consumption devices is investigated. Ionic liquid of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIM]BF₄) is employed as a modification layer of [6,6]‐phenyl‐C61‐butyric acid methyl ester) (PCBM) in the inverted PSCs. The incorporation of [BMIM]BF₄ not only paves the interface contact between PCBM and electrode, but also facilitates the electron transport and extraction owing to the efficient passivation of the surface trap states. Moreover, [BMIM]BF₄ with excellent thermal stability can act as a protective layer by preventing the erosion of moisture and oxygen into the perovskite layer. The resulting devices present a record indoor power conversion efficiency (PCE) of 35.20% under fluorescent lamps of 1000 lux, and an impressive PCE of 19.30% under 1 sun illumination. The finding in this work verifies the excellent indoor performance of PSCs to meet the requirements of eco‐friendly economy.     

Achieving 17.4% Efficiency of Ternary Organic Photovoltaics with Two Well‐Compatible Nonfullerene Acceptors for Minimizing Energy Loss

A power conversion efficiency (PCE) of 16.2% is achieved in PM6:BTP‐4F‐12 based organic photovoltaics (OPVs). On the basis of efficient binary OPVs, a series of ternary OPVs are constructed by incorporating MeIC as the third component. The open circuit voltages (V_OCs) of ternary OPVs can be gradually increased along with the incorporation of MeIC, suggesting the formation of an alloy state between BTP‐4F‐12 and MeIC with good compatibility. The energy loss (E_loss) of ternary OPVs can be decreased compared with that of two binary OPVs, contributing to the V_OC improvement of ternary OPVs. The short circuit current density (J_SC) and fill factor (FF) of ternary OPVs can also be simultaneously enhanced with MeIC content up to 10 wt% in acceptors, leading to 17.4% PCE of the optimized ternary OPVs. The J_SC and FF improvement of ternary OPVs is thought to result from the optimized ternary active layers with more efficient photon harvesting, exciton dissociation and charge transport. The 17.4% PCE and 79.2% FF is among the top values of ternary OPVs. This work indicates that a ternary strategy is an emerging method to simultaneously minimize E_loss and optimize photon harvesting as well as improve the morphology of active layers for realizing performance improvement for OPVs.     

Bandgap Narrowing in Non‐Fullerene Acceptors: Single Atom Substitution Leads to High Optoelectronic Response Beyond 1000 nm

Two narrow bandgap non‐fullerene acceptors (NBG‐NFAs), namely, COTIC‐4F and SiOTIC‐4F, are designed and synthesized for the fabrication of efficient near‐infrared organic solar cells (OSCs). The chemical structures of the NBG‐NFAs contain a D′‐D‐D′ electron‐rich internal core based on a cyclopentadithiophene (or dithienosilole) (D) and alkoxythienyl (D′) core, end‐capped with the highly electron‐deficient unit 2‐(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile (A), ultimately providing a A‐D′‐D‐D′‐A molecular configuration that enhances the intramolecular charge transfer characteristics of the excited states. One can thereby reduce the optical bandgap (E_g^opt) to as low as ≈1.10 eV, one of the smallest values for NFAs reported to date. In bulk‐heterojunction (BHJ) OSCs, NBG‐NFA blends with the polymer donor PTB7‐Th yield power conversion efficiencies (PCE) of up to 9.0%, which is particularly high when compared against a range of NBG BHJ blends. Most significantly, it is found that, despite the small energy loss (E_g^opt ? eV_OC) of 0.52 eV, the PTB7‐Th/NBG‐NFA bulk heterojunction blends can yield short‐circuit current densities of up to 22.8 mA cm^?2, suggesting that the design and application of NBG‐NFA materials have substantial potential to further improve the PCE of OSCs.     

Influence of vitamins A, D3 and E status on post-mortem meat quality in steers under winter housing or pasture finishing systems

We investigated the influence of Swedish recommended vitamins A, D3 and E supplementation levels on muscle tenderness and fatty acid (FA) composition under indoor or outdoor finishing programmes. Swedish Red breed steer calves were divided into vitamin supplemented (n = 12) and non-supplemented (n = 15) groups while on pasture prior to the finishing period. This trial began at the beginning of the winter housing period during which the steers were fed a 55 : 45 dry matter barley : grass silage diet indoors. The indoor finished group was comprised of vitamin supplemented (n = 6) and non-supplemented (n = 8) steers slaughtered after about 155 days on feed. Vitamin supplemented steers were provided with 100 g mineral supplement providing 400 000 IU vitamin A, 100 000 IU D3 and 3000 IU E daily as recommended for Swedish production practices. In spring, outdoor finished vitamin supplemented (n = 6) and non-supplemented (n = 7) steers grazed semi-natural grassland for an additional 120 days before slaughter. During pasture, vitamin supplemented steers had free-choice access to a mineral supplement containing vitamins A, D3 and E. The mineral supplement for the non-supplemented steers did not contain vitamins A, D3 and E and was provided at the same amount as the vitamin supplemented steers. Shear force values were similar between vitamin supplemented and non-supplemented steers after ageing 2, 7 and 14 days within indoor and outdoor finishing programmes. The shear force values had decreased by 14 days of ageing within all programmes. The μ- and m-calpain activity did not differ between vitamin supplemented and non-supplemented steers for either the indoor or outdoor finishing programmes. The calpastatin activity was higher for the indoor, vitamin supplemented steers. Indoor finished vitamin supplemented steers had a greater proportion of C18:1c-9 and total monounsaturated fatty acids, whereas the non-supplemented steers had a greater proportion of total saturated fatty acids. We concluded that the meat quality from steers not receiving vitamin supplementation was similar to that of steers receiving vitamins A, D3 and E supplementation at Swedish recommended levels under indoor and outdoor finishing programmes.     

Circadian and seasonal responses in Indian weaver bird: subjective interpretation of day and night depends upon both light intensity and contrast between illuminations

This study investigated whether changes in illumination modify perception of day and night conditions in a diurnal species, the Indian weaver bird. Birds were initially subjected to a 12-h light:12-h dark regime (12L:12D; L=20 lux, D =0.5 lux). After every 2 wks, the combinations of light illumination in L and D phases were changed as follows: 20:2 lux, 20:5 lux, 20:10 lux, 20:20 lux, 20:100 lux, and 20:200 lux. Finally, birds were released into dim constant light (0.5 lux) for 2 wks to determine the phase and period of the circadian activity rhythm. They were also laparotomized at periodic intervals to examine the effects of the light regimes on the seasonal testicular cycle. All individuals showed a consistently similar response. As evident by the activity pattern under these light regimes, both in total activity during contrasting light phases and during the 2?h in the beginning and end of first light phase, birds interpreted the period of higher light intensity as day, and the period of lower intensity as the night. During the period of similar light intensity, i.e., under LL, birds free-ran with a circadian period ( ~ 24 h). In bright LL (20 lux), the activity rhythm was less distinct, but periodogram analysis revealed the circadian period for the group as 24.46 (+/-) 0.41 h (mean???SE). However, in dim LL at the end of the experiment, all birds exhibited a circadian pattern with average period of 25.52 (+/-) 0.70 h. All birds also showed testicular growth and regression during the 16-wks study. It is suggested that weaver birds interpret day and night subjectively based on both the light intensity and contrast between illuminations during two phases over the 24 h.     

Photosynthetic efficiency of Chlamydomonas reinhardtii in attenuated, flashing light

As a result of mixing and light attenuation, algae in a photobioreactor (PBR) alternate between light and dark zones and, therefore, experience variations in photon flux density (PFD). These variations in PFD are called light/dark (L/D) cycles. The objective of this study was to determine how these L/D cycles affect biomass yield on light energy in microalgae cultivation. For our work, we used controlled, short light path, laboratory, turbidostat‐operated PBRs equipped with a LED light source for square‐wave L/D cycles with frequencies from 1 to 100 Hz. Biomass density was adjusted that the PFD leaving the PBR was equal to the compensation point of photosynthesis. Algae were acclimated to a sub‐saturating incident PFD of 220 µmol m^?2 s^?1 for continuous light. Using a duty cycle of 0.5, we observed that L/D cycles of 1 and 10 Hz resulted on average in a 10% lower biomass yield, but L/D cycles of 100 Hz resulted on average in a 35% higher biomass yield than the yield obtained in continuous light. Our results show that interaction of L/D cycle frequency, culture density and incident PFD play a role in overall PBR productivity. Hence, appropriate L/D cycle setting by mixing strategy appears as a possible way to reduce the effect that dark zone exposure impinges on biomass yield in microalgae cultivation. The results may find application in optimization of outdoor PBR design to maximize biomass yields. Biotechnol. Bioeng. 2012; 109: 2567–2574. © 2012 Wiley Periodicals, Inc.     

Effects of Artificial Dawn and Morning Blue Light on Daytime Cognitive Performance,Well-being,Cortisol and Melatonin Levels

Light exposure elicits numerous effects on human physiology and behavior, such as better cognitive performance and mood. Here we investigated the role of morning light exposure as a countermeasure for impaired cognitive performance and mood under sleep restriction (SR). Seventeen participants took part of a 48h laboratory protocol, during which three different light settings (separated by 2?wks) were administered each morning after two 6-h sleep restriction nights: a blue monochromatic LED (light-emitting diode) light condition (BL; 100?lux at 470?nm for 20?min) starting 2?h after scheduled wake-up time, a dawn-simulating light (DsL) starting 30?min before and ending 20?min after scheduled wake-up time (polychromatic light gradually increasing from 0 to 250?lux), and a dim light (DL) condition for 2?h beginning upon scheduled wake time (<8?lux). Cognitive tasks were performed every 2?h during scheduled wakefulness, and questionnaires were administered hourly to assess subjective sleepiness, mood, and well-being. Salivary melatonin and cortisol were collected throughout scheduled wakefulness in regular intervals, and the effects on melatonin were measured after only one light pulse. Following the first SR, analysis of the time course of cognitive performance during scheduled wakefulness indicated a decrease following DL, whereas it remained stable following BL and significantly improved after DsL. Cognitive performance levels during the second day after SR were not significantly affected by the different light conditions. However, after both SR nights, mood and well-being were significantly enhanced after exposure to morning DsL compared with DL and BL. Melatonin onset occurred earlier after morning BL exposure, than after morning DsL and DL, whereas salivary cortisol levels were higher at wake-up time after DsL compared with BL and DL. Our data indicate that exposure to an artificial morning dawn simulation light improves subjective well-being, mood, and cognitive performance, as compared with DL and BL, with minimal impact on circadian phase. Thus, DsL may provide an effective strategy for enhancing cognitive performance, well-being, and mood under mild sleep restriction.     

Thermally Stable All‐Polymer Solar Cells with High Tolerance on Blend Ratios

Tuning the blend composition is an essential step to optimize the power conversion efficiency (PCE) of organic bulk heterojunction (BHJ) solar cells. PCEs from devices of unoptimized donor:acceptor (D:A) weight ratio are generally significantly lower than optimized devices. Here, two high‐performance organic nonfullerene BHJ blends PBDB‐T:ITIC and PBDB‐T:N2200 are adopted to investigate the effect of blend ratio on device performance. It is found that the PCEs of polymer‐polymer (PBDB‐T:N2200) blend are more tolerant to composition changes, relative to polymer‐molecule (PBDB‐T:ITIC) devices. In both systems, short‐circuit current density (J_sc) is tracked closely with PCE, indicating that exciton dissociation and transport strongly influence PCEs. With dilute acceptor concentrations, polymer‐polymer blends maintain high electron mobility relative to the polymer‐molecule blends, which explains the dramatic difference in PCEs between them as a function of D:A blend ratio. In addition, polymer‐polymer solar cells, especially at high D:A blend ratio, are stable (less than 5% relative loss) over 70 d under continuous heating at 80 °C in a glovebox without encapsulation. This work demonstrates that all‐polymer solar cells show advantage in operational lifetime under thermal stress and blend‐ratio resilience, which indicates their high potential for designing of stable and scalable solar cells.     

Circadian and Seasonal Responses in Indian Weaver Bird: Subjective Interpretation of Day and Night Depends Upon Both Light Intensity and Contrast Between Illuminations

This study investigated whether changes in illumination modify perception of day and night conditions in a diurnal species, the Indian weaver bird. Birds were initially subjected to a 12-h light:12-h dark regime (12L:12D; L?=?20 lux, D =?0.5 lux). After every 2 wks, the combinations of light illumination in L and D phases were changed as follows: 20:2 lux, 20:5 lux, 20:10 lux, 20:20 lux, 20:100 lux, and 20:200 lux. Finally, birds were released into dim constant light (0.5 lux) for 2 wks to determine the phase and period of the circadian activity rhythm. They were also laparotomized at periodic intervals to examine the effects of the light regimes on the seasonal testicular cycle. All individuals showed a consistently similar response. As evident by the activity pattern under these light regimes, both in total activity during contrasting light phases and during the 2?h in the beginning and end of first light phase, birds interpreted the period of higher light intensity as day, and the period of lower intensity as the night. During the period of similar light intensity, i.e., under LL, birds free-ran with a circadian period (～24?h). In bright LL (20 lux), the activity rhythm was less distinct, but periodogram analysis revealed the circadian period for the group as 24.46?±?0.41?h (mean?±?SE). However, in dim LL at the end of the experiment, all birds exhibited a circadian pattern with average period of 25.52?±?0.70?h. All birds also showed testicular growth and regression during the 16-wks study. It is suggested that weaver birds interpret day and night subjectively based on both the light intensity and contrast between illuminations during two phases over the 24?h. (Author correspondence: drskumar7@yahoo.com)     

Enhanced Photovoltaic Performance of Amorphous Donor–Acceptor Copolymers Based on Fluorine‐Substituted Benzodioxocyclohexene‐Annelated Thiophene

Donor–acceptor (D‐A) type π‐conjugated copolymers with crystalline behavior have been extensively investigated as donor semiconductors in organic photovoltaics (OPVs). On the other hand, the development of high‐performance amorphous donor materials is still behind. The amorphous donor copolymer DTS‐C₀(F₂) consisting of dithieno[3,2‐b:2′,3′‐d]silole ( DTS ) donor unit and the recently developed fluorine‐substituted naphtho[2,3‐c]thiophene‐4,9‐dione ( C₀(F₂) ) acceptor unit shows moderate photovoltaic performance upon blending with PC₇₁BM. In this work, to enhance the hole‐transporting characteristics, a 3‐hexylthiophene ( HT ) spacer unit is integrated into the conjugated backbone, resulting in a new amorphous copolymer DTS‐HT‐C₀(F₂) . The strong electron‐accepting nature of C₀(F₂) allows the introduction of the HT spacer without affecting the frontier orbital energies and thus the D‐A character. Without using solvent additives and thermal annealing, OPVs based on DTS‐HT‐C₀(F₂) and [6,6]‐phenyl‐C71‐butyric acid methyl ester PC₇₁BM show an improved power conversion efficiency of 9.12%. Investigation of the device physics unambiguously reveals that the hole mobility of the copolymer in the blend is increased by an order of magnitude by the introduction of HT , while keeping an amorphous film nature, leading to higher short‐circuit current density and fill factor. These results demonstrate the realization of high‐performance OPVs based on amorphous active layers.     

柑橘木虱成虫趋光行为反应

柑橘木虱Diaphorina citri Kuwayama是柑橘黄龙病(huanglongbing,HLB)的重要传播媒介。为了利用灯光诱控技术防治柑橘木虱,本实验于室内条件下研究柑橘木虱对波长为360 nm、400 nm、440 nm、480 nm、520 nm、560 nm和600 nm的LED光源和不同光照强度趋光行为反应。结果表明:柑橘木虱对7种单色光都有正趋向性。其中雌雄混合存在时对400 nm的紫光趋向性最强,其次是560 nm的绿光;单独处理时,雌成虫对400 nm的紫光趋性最强,其次是520 nm的绿光,雄成虫则是对520 nm的绿光趋性最强,其次是400 nm的紫光。在200μw/cm 2到1000μw/cm 2的光照强度范围内,随着光照强度的增大,柑橘木虱雄成虫趋光行为逐渐增强,在光照强度为1000μw/cm 2时趋光行为最强,但雌成虫趋光行为变化不明显。该研究表明:柑橘木虱雌雄成虫具有明显的正趋光性,且对光谱和光强的反应存在差异。这一结果可为柑橘木虱田间的灯光诱控提供实验依据。     

Light-emitting diodes and cool white fluorescent light similarly suppress pineal gland melatonin and maintain retinal function and morphology in the rat.

BACKGROUND AND PURPOSE: A novel light-emitting diode (LED) light source for use in animal-habitat lighting was evaluated. METHODS: The LED was evaluated by comparing its effectiveness with that of cool white fluorescent light (CWF) in suppressing pineal gland melatonin content and maintaining normal retinal physiology, as evaluated by use of electroretinography (ERG), and morphology. RESULTS: Pineal melatonin concentration was equally suppressed by LED and CWF light at five light illuminances (100, 40, 10, 1, and 0.1 lux). There were no significant differences in melatonin suppression between LED and CWF light, compared with values for unexposed controls. There were no differences in ERG a-wave implicit times and amplitudes or b-wave implicit times and amplitudes between 100-lux LED-exposed rats and 100-lux CWF-exposed rats. Results of retinal histologic examination indicated no differences in retinal thickness, rod outer segment length, and number of rod nuclei between rats exposed to 100-lux LED and 100-lux CWF for 14 days. Furthermore, in all eyes, the retinal pigmented epithelium was intact and not vacuolated, whereas rod outer segments were of normal thickness. CONCLUSION: LED light does not cause retinal damage and can suppress pineal melatonin content at intensities similar to CWF light intensities.     

Variations in the light-induced suppression of nocturnal melatonin with special reference to variations in the pupillary light reflex in humans

The purpose of the present study was to elucidate the existence of individual differences of pupil response to light stimulation, and to confirm the reproducibility of this phenomenon. Furthermore, the relationship between the individual differences in nocturnal melatonin suppression induced by lighting and the individual differences of pupillary light response (PLR) was examined. The pupil diameter and salivary melatonin content of 20 male students were measured at the same period of time (00:00-02:30 hr) on different days, accordingly. Illumination (530 nm) produced by a monochromatic light-emitting diode (LED) was employed as the light stimulation: pupil diameter was measured with 4 different levels of illuminance of 1, 3, 30 and 600 lux and melatonin levels were measured at 30 and 600 lux (respective controls were taken at 0 lux). Oral temperature, blood pressure and subjective index of sleepiness were taken in experiments where melatonin levels were measured. Changes of the pupil diameter in response to light were expressed as PLR and light-induced melatonin suppression was expressed as a control-adjusted melatonin suppression score (control-adjusted MSS), which was compared to the melatonin level measured at 0 lux. In the PLR, the coefficients of variation obtained at 30 lux or less were large (51.5, 45.0, 28.4 and 6.2% at 1, 3, 30 and 600 lux, respectively). Correlations of illuminance of any combination at 30 lux or less were statistically significant at less than 1% level (1 vs. 3 lux: r=0.68; 1 vs. 30 lux: r=0.64; 3 vs. 30 lux: r=0.73), which showed the reproducibility of individual differences. The control-adjusted MSS at 600 lux (-1.14+/-1.16) was significantly (p<0.05) lower than that registered at 30 lux (-0.22+/-2.12). PLR values measured at 30 and 600 lux were then correlated with control-adjusted MSS; neither indicated a significant linear relationship. However, the control-adjusted MSS showed around 0 under any of the illuminance conditions in subjects with high PLR. In control-adjusted MSS of low values (i.e., melatonin secretions were easily suppressed), subjects indicated typically low PLR. In subjects with low control-adjusted MSS (n=3), characteristic changes in the autonomic nervous system, such as body temperature and blood pressure, were noted in subjects exposed to low illuminance of 30 lux. The fact that the relationship between PLR and control-adjusted MSS portray a similar pattern even under different luminance conditions suggests that MSS may not be affected in those with high PLR at low illuminance, regardless of the illuminance condition.     

Twist and Degrade—Impact of Molecular Structure on the Photostability of Nonfullerene Acceptors and Their Photovoltaic Blends

Nonfullerene acceptors (NFAs) dominate organic photovoltaic (OPV) research due to their promising efficiencies and stabilities. However, there is very little investigation into the molecular processes of degradation, which is critical to guiding design of novel NFAs for long‐lived, commercially viable OPVs. Here, the important role of molecular structure and conformation in NFA photostability in air is investigated by comparing structurally similar but conformationally different promising NFAs: planar O‐IDTBR and nonplanar O‐IDFBR. A three‐phase degradation process is identified: i) initial photoinduced conformational change (i.e., torsion about the core–benzothiadiazole dihedral), induced by noncovalent interactions with environmental molecules, ii) followed by photo‐oxidation and fragmentation, leading to chromophore bleaching and degradation product formation, and iii) finally complete chromophore bleaching. Initial conformational change is a critical prerequisite for further degradation, providing fundamental understanding of the relative stability of IDTBR and IDFBR, where the already twisted IDFBR is more prone to degradation. When blended with the donor polymer poly(3‐hexylthiophene), both NFAs exhibit improved photostability while the photostability of the polymer itself is significantly reduced by the more miscible twisted NFA. The findings elucidate the important role of NFA molecular structure in photostability of OPV systems, and provide vital insights into molecular design rules for intrinsically photostable NFAs.     

Study of Burn‐In Loss in Green Solvent‐Processed Ternary Blended Organic Photovoltaics Derived from UV‐Crosslinkable Semiconducting Polymers and Nonfullerene Acceptors

This work deals with the investigation of burn‐in loss in ternary blended organic photovoltaics (OPVs) prepared from a UV‐crosslinkable semiconducting polymer (P2FBTT‐Br) and a nonfullerene acceptor (IEICO‐4F) via a green solvent process. The synthesized P2FBTT‐Br can be crosslinked by UV irradiation for 150 s and dissolved in 2‐methylanisole due to its asymmetric structure. In OPV performance and burn‐in loss tests performed at 75 °C or AM 1.5G Sun illumination for 90 h, UV‐crosslinked devices with PC₇₁BM show 9.2% power conversion efficiency (PCE) and better stability against burn‐in loss than pristine devices. The frozen morphology resulting from the crosslinking prevents lateral crystallization and aggregation related to morphological degradation. When IEICO‐4F is introduced in place of a fullerene‐based acceptor, the burn‐in loss due to thermal aging and light soaking is dramatically suppressed because of the frozen morphology and high miscibility of the nonfullerene acceptor (18.7% → 90.8% after 90 h at 75 °C and 37.9% → 77.5% after 90 h at AM 1.5G). The resulting crosslinked device shows 9.4% PCE (9.8% in chlorobenzene), which is the highest value reported to date for crosslinked active materials, in the first green processing approach.     

A screening model to predict microalgae biomass growth in photobioreactors and raceway ponds

A microalgae biomass growth model was developed for screening novel strains for their potential to exhibit high biomass productivities under nutrient‐replete conditions in photobioreactors or outdoor ponds. Growth is modeled by first estimating the light attenuation by biomass according to Beer‐Lambert's Law, and then calculating the specific growth rate in discretized culture volume slices that receive declining light intensities due to attenuation. The model uses only two physical and two species‐specific biological input parameters, all of which are relatively easy to determine: incident light intensity, culture depth, as well as the biomass light absorption coefficient and the specific growth rate as a function of light intensity. Roux bottle culture experiments were performed with Nannochloropsis salina at constant temperature (23°C) at six different incident light intensities (10, 25, 50, 100, 250, and 850 µmol/m² s) to determine both the specific growth rate under non‐shading conditions and the biomass light absorption coefficient as a function of light intensity. The model was successful in predicting the biomass growth rate in these Roux bottle batch cultures during the light‐limited linear phase at different incident light intensities. Model predictions were moderately sensitive to minor variations in the values of input parameters. The model was also successful in predicting the growth performance of Chlorella sp. cultured in LED‐lighted 800 L raceway ponds operated in batch mode at constant temperature (30°C) and constant light intensity (1,650 µmol/m² s). Measurements of oxygen concentrations as a function of time demonstrated that following exposure to darkness, it takes at least 5 s for cells to initiate dark respiration. As a result, biomass loss due to dark respiration in the aphotic zone of a culture is unlikely to occur in highly mixed small‐scale photobioreactors where cells move rapidly in and out of the light. By contrast, as supported also by the growth model, biomass loss due to dark respiration occurs in the dark zones of the relatively less well‐mixed pond cultures. In addition to screening novel microalgae strains for high biomass productivities, the model can also be used for optimizing the pond design and operation. Additional research is needed to validate the biomass growth model for other microalgae species and for the more realistic case of fluctuating temperatures and light intensities observed in outdoor pond cultures. Biotechnol. Bioeng. 2013; 110: 1583–1594. © 2012 Wiley Periodicals, Inc.     

The effect of continuous light on prolactin secretion in prepubertal Holstein bulls

Effects of 16 (16 light:8 dark) and 8 (8L:16D) h of daily light were compared with continuous light (24L:0D) exposure on prolactin (PRL) concentrations in serum of prepubertal bulls. Concentrations of PRL in serum were 2 to 3 fold greater in bulls exposed to 24L:0D or 16L:8D as compared with 8L:16D. However, PRL concentrations attained a maximum approximately 3 weeks later in calves exposed to 24L:0D than in calves given 16L:8D. Continuous low intensity (11 to 16 lux) lighting supplemented with 16 or 8 h of high intensity (449 to 618 lux) light per day increased PRL concentrations in serum of prepubertal bulls 1.5 to 2.5 fold relative to 8L:16D (470 lux). We found that relative to 8L:16D, 1) photoperiods of 16 or 24 h of light per day increased serum concentrations of PRL in prepubertal bulls; however, the time required to achieve maximum PRL concentrations was longer in animals exposed to 24L:0D, 2) continuous low intensity lighting supplemented with 16 or 8 h of high intensity daily light also increased concentrations of PRL in serum.     

Retinal cyclic light damage threshold for albino rats

This study determined the minimum cyclic [12L:12D] light intensity which produces retinal damage in albino (Sprague-Dawley) rats raised from birth to 15 weeks of age under a cyclic light intensity of 6 lux. Four experimental light intensities were tested, including: 1345, 270, 130 and 65 lux. Control animals remained under 6 lux. For each of the intensities tested, the retinas of groups of six rats were evaluated after various durations of light exposure for physiological and morphological evidence of light damage. The indices of damage were (a) histological and morphometric changes in the retina and (b) changes in the amplitude of the b-wave of the electroretinogram. The data indicated that light intensities of 1345 or 270 lux severely damaged retinas of albino rats within 3-7 days of the initiation of light exposure. Exposure to 130 or 65 lux produced much less dramatic changes in the responsiveness and morphology of the retina which did not appear to be permanent. Based on these results, a reasonable estimate for the threshold cyclic light intensity which produces damage to retinas of albino rats raised under 6 lux lies between 130 and 270 lux, or approximately 1.3 log units above the light intensity under which the animals were raised.     

Comparison between anopheline mosquitoes (Diptera: Culicidae) caught using different methods in a malaria endemic area of Papua New Guinea

The mosquito sampling efficiency of CDC (Centers for Disease Control) miniature light traps hung adjacent to mosquito nets, was compared with that of both indoor and outdoor human-bait collections in ten villages in the Wosera area of Papua New Guinea. The most frequently collected anopheline in the matched indoor and light trap samples was Anopheles koliensis Owen, followed by A. punctulatus D?nitz, A. karwari (James), A. farauti Laveran (sensu lato), A. longirostris Brug and A. bancroftii Giles. All species were much less frequent in the light traps than in landing catches. The hypothesis that the numbers of mosquitoes in light traps are proportional to human landing catches was examined using regression models that allowed for sampling error in both entomological measurements. Light traps under-sampled A. punctulatus and A. farauti s.l. at high densities. The models indicated that the ratio of light trap to landing catch females of A. koliensis and A. karwari increased with increasing mosquito density. Light trap catches of A. longirostris were proportional to indoor landing rates but when outdoor landing rates were high this species was under-sampled by light traps. Numbers of A. bancroftii in light traps were found to be proportional to those in outdoor landing catches, but were negatively related to those attempting to bite indoors. Circumsporozoite positivity rates for both Plasmodium falciparum Welch and P. vivax (Grassi & Feletti) in A. punctulatus and A. farauti s.l. were significantly higher in light trap collections than in either indoor or outdoor landing catches, suggesting that light traps may selectively sample older mosquitoes of these species.