Rational Design of Hydroxyl‐Rich Ti3C2Tx MXene Quantum Dots for High‐Performance Electrochemical N2 Reduction

To enable an efficient and cost‐effective electrocatalytic N₂ reduction reaction (NRR) the development of an electrocatalyst with a high NH₃ yield and good selectivity is required. In this work, Ti₃C₂T_x MXene‐derived quantum dots (Ti₃C₂T_x QDs) with abundant active sites enable the development of efficient NRR electrocatalysts. Given surface functional groups play a key role on the electrocatalytic performance, density functional theory calculations are first conducted, clarifying that hydroxyl groups on Ti₃C₂T_x offer excellent NRR activity. Accordingly, hydroxyl‐rich Ti₃C₂T_x QDs (Ti₃C₂OH QDs) are synthesized as NRR catalysts by alkalization and intercalation. This material offers an NH₃ yield and Faradaic efficiency of 62.94 µg h^?1 mg^?1_cat. and 13.30% at ?0.50 V, respectively, remarkably higher than reported MXene catalysts. This work demonstrates that MXene catalysts can be mediated through the optimization of both QDs sizes and functional groups for efficient ammonia production at room temperature.     

Enhanced Rate Capability of Ion‐Accessible Ti3C2Tx‐NbN Hybrid Electrodes

Although 2D Ti₃C₂T_x is a good candidate for supercapacitors, the restacking of nanosheets hinders the ion transport significantly at high scan rates, especially under practical mass loading (>10 mg cm^?2) and thickness (tens of microns). Here, Ti₃C₂T_x‐NbN hybrid film is designed by self‐assembling Ti₃C₂T_x with 2D arrays of NbN nanocrystals. Working as an interlayer spacer of Ti₃C₂T_x, NbN facilitates the ion penetration through its 2D porous structure; even at extremely high scan rates. The hybrid film shows a thickness‐independent rate performance (almost the same rate capabilities from 2 to 20 000 mV s^?1) for 3 and 50 µm thick electrodes. Even a 109 µm thick Ti₃C₂T_x‐NbN electrode shows a better rate performance than 25 µm thick pure Ti₃C₂T_x electrodes. This method may pave a way to controlling ion transport in electrodes composed of 2D conductive materials, which have potential applications in high‐rate energy storage and beyond.     

A Strategy for Synthesis of Carbon Nitride Induced Chemically Doped 2D MXene for High‐Performance Supercapacitor Electrodes

A step‐by‐step strategy is reported for improving capacitance of supercapacitor electrodes by synthesizing nitrogen‐doped 2D Ti₂CT_x induced by polymeric carbon nitride (p‐C₃N₄), which simultaneously acts as a nitrogen source and intercalant. The NH₂CN (cyanamide) can form p‐C₃N₄ on the surface of Ti₂CT_x nanosheets by a condensation reaction at 500–700 °C. The p‐C₃N₄ and Ti₂CT_x complexes are then heat‐treated to obtain nitrogen‐doped Ti₂CT_x nanosheets. The triazine‐based p‐C₃N₄ decomposes above 700 °C; thus, the nitrogen species can be surely doped into the internal carbon layer and/or defect site of Ti₂CT_x nanosheets at 900 °C. The extended interlayer distance and c‐lattice parameters (c‐LPs of 28.66 Å) of Ti₂CT_x prove that the p‐C₃N₄ grown between layers delaminate the nanosheets of Ti₂CT_x during the doping process. Moreover, 15.48% nitrogen doping in Ti₂CT_x improves the electrochemical performance and energy storage ability. Due to the synergetic effect of delaminated structures and heteroatom compositions, N‐doped Ti₂CT_x shows excellent characteristics as an electrochemical capacitor electrode, such as perfectly rectangular cyclic voltammetry results (CVs, R² = 0.9999), high capacitance (327 F g^?1 at 1 A g^?1, increased by ≈140% over pristine‐Ti₂CT_x), and stable long cyclic performance (96.2% capacitance retention after 5000 cycles) at high current density (5 A g^?1).     

MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency

MXene, a new class of 2D materials, has gained significant attention owing to its attractive electrical conductivity, tunable work function, and metallic nature for wide range of applications. Herein, delaminated few layered Ti₃C₂T_x MXene contacted Si solar cells with a maximum power conversion efficiency (PCE) of ≈11.5% under AM1.5G illumination are demonstrated. The formation of an Ohmic junction of the metallic MXene to n⁺‐Si surface efficiently extracts the photogenerated electrons from n⁺np⁺‐Si, decreases the contact resistance, and suppresses the charge carrier recombination, giving rise to excellent open‐circuit voltage and short‐circuit current density. The rapid thermal annealing process further improves the electrical contact between Ti₃C₂T_x MXene and n⁺‐Si surface by reducing sheet resistance, increasing electrical conductivity, and decreasing cell series resistance, thus leading to a remarkable improvement in fill factor and overall PCE. The work demonstrated here can be extended to other MXene compositions as potential electrodes for developing highly performing solar cells.     

Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO2‐MXene Heterostructures for Lithium–Sulfur Batteries

The detrimental shuttle effect in lithium–sulfur batteries mainly results from the mobility of soluble polysulfide intermediates and their sluggish conversion kinetics. Herein, presented is a multifunctional catalyst with the merits of strong polysulfides adsorption ability, superior polysulfides conversion activity, high specific surface area, and electron conductivity by in situ crafting of the TiO₂‐MXene (Ti₃C₂T_x) heterostructures. The uniformly distributed TiO₂ on MXene sheets act as capturing centers to immobilize polysulfides, the hetero‐interface ensures rapid diffusion of anchored polysulfides from TiO₂ to MXene, and the oxygen‐terminated MXene surface is endowed with high catalytic activity toward polysulfide conversion. The improved lithium–sulfur batteries deliver 800 mAh g^?1 at 2 C and an ultralow capacity decay of 0.028% per cycle over 1000 cycles at 2 C. Even with a high sulfur loading of 5.1 mg cm^?2, the capacity retention of 93% after 200 cycles is still maintained. This work sheds new insights into the design of high‐performance catalysts with manipulated chemical components and tailored surface chemistry to regulate polysulfides in Li–S batteries.     

Low‐Temperature Reduction Strategy Synthesized Si/Ti3C2 MXene Composite Anodes for High‐Performance Li‐Ion Batteries

Silicon is attracting enormous attention due to its theoretical capacity of 4200 mAh g^?1 as an anode for Li‐ion batteries (LIBs). It is of fundamental importance and challenge to develop low‐temperature reaction route to controllably synthesize Si/Ti₃C₂ MXene LIBs anodes. Herein, a novel and efficient strategy integrating in situ orthosilicate hydrolysis and a low‐temperature reduction process to synthesize Si/Ti₃C₂ MXene composites is reported. The hydrolysis of tetraethyl orthosilicate leads to homogenous nucleation and growth of SiO₂ nanoparticles on the surface of Ti₃C₂ MXene. Subsequently, SiO₂ nanoparticles are reduced to Si via a low‐temperature (200 °C) reduction route. Importantly, Ti₃C₂ MXene not only provides fast transfer channels for Li⁺ and electrons, but also relieves volume expansion of Si during cycling. Moreover, the characteristics of excellent pseudocapacitive performance and high conductivity of Ti₃C₂ MXene can synergistically contribute to the enhancement of energy storage performance. As expected, Ti₃C₂/Si anode exhibits an outstanding specific capacity of 1849 mAh g^?1 at 100 mA g^?1, even retaining 956 mAh g^?1 at 1 A g^?1. The low‐temperature synthetic route to Si/Ti₃C₂ MXene electrodes and involved battery‐capacitive dual‐model energy storage mechanism has potential in the design of novel high‐performance electrodes for energy storage devices.     

Enhanced Li‐Ion Accessibility in MXene Titanium Carbide by Steric Chloride Termination

Pseudocapacitance is a key charge storage mechanism to advanced electrochemical energy storage devices distinguished by the simultaneous achievement of high capacitance and a high charge/discharge rate by using surface redox chemistries. MXene, a family of layered compounds, is a pseudocapacitor‐like electrode material which exhibits charge storage through exceptionally fast ion accessibility to redox sites. Here, the authors demonstrate steric chloride termination in MXene Ti₂CT_x (T_x : surface termination groups) to open the interlayer space between the individual 2D Ti₂CT_x units. The open interlayer space significantly enhances Li‐ion accessibility, leading to high gravimetric and volumetric capacitances (300 F g^?1 and 130 F cm^?3) with less diffusion limitation. A Li‐ion hybrid capacitor consisting of the Ti₂CT_x negative electrode and the LiNi_1/3Co_1/3Mn_1/3O₂ positive electrode displays an unprecedented specific energy density of 160 W h kg^?1 at 220 W kg^?1 based on the total weight of positive and negative active materials.     

High‐Efficiency Thermoelectric Power Generation Enabled by Homogeneous Incorporation of MXene in (Bi,Sb)2Te3 Matrix

The (Bi,Sb)₂Te₃ (BST) compounds have long been considered as the benchmark of thermoelectric (TE) materials near room temperature especially for refrigeration. However, their unsatisfactory TE performances in wide‐temperature range severely restrict the large‐scale applications for power generation. Here, using a self‐assembly protocol to deliver a homogeneous dispersion of 2D inclusion in matrix, the first evidence is shown that incorporation of MXene (Ti₃C₂T_x) into BST can simultaneously achieve the improved power factor and greatly reduced thermal conductivity. The oxygen‐terminated Ti₃C₂T_x with proper work function leads to highly increased electrical conductivity via hole injection and retained Seebeck coefficient due to the energy barrier scattering. Meanwhile, the alignment of Ti₃C₂T_x with the layered structure significantly suppresses the phonon transport, resulting in higher interfacial thermal resistance. Accordingly, a peak ZT of up to 1.3 and an average ZT value of 1.23 from 300 to 475 K are realized for the 1 vol% Ti₃C₂T_x/BST composite. Combined with the high‐performance composite and rational device design, a record‐high thermoelectric conversion efficiency of up to 7.8% is obtained under a temperature gradient of 237 K. These findings provide a robust and scalable protocol to incorporate MXene as a versatile 2D inclusion for improving the overall performance of TE materials toward high energy‐conversion efficiency.     

Hydrous RuO2‐Decorated MXene Coordinating with Silver Nanowire Inks Enabling Fully Printed Micro‐Supercapacitors with Extraordinary Volumetric Performance

The fabrication of fully printable, flexible micro‐supercapacitors (MSCs) with high energy and power density remains a significant technological hurdle. To overcome this grand challenge, the 2D material MXene has garnered significant attention for its application, among others, as a printable electrode material for high performing electrochemical energy storage devices. Herein, a facile and in situ process is proposed to homogeneously anchor hydrous ruthenium oxide (RuO₂) nanoparticles on Ti₃C₂T_x MXene nanosheets. The resulting RuO₂@MXene nanosheets can associate with silver nanowires (AgNWs) to serve as a printable electrode with micrometer‐scale resolution for high performing, fully printed MSCs. In this printed nanocomposite electrode, the RuO₂ nanoparticles contribute high pseudocapacitance while preventing the MXene nanosheets from restacking, ensuring an effective ion highway for electrolyte ions. The AgNWs coordinate with the RuO₂@MXene to guarantee the rheological property of the electrode ink, and provide a highly conductive network architecture for rapid charge transport. As a result, MSCs printed from the nanocomposite inks demonstrate volumetric capacitances of 864.2 F cm^?3 at 1 mV s^?1, long‐term cycling performance (90% retention after 10 000 cycles), good rate capability (304.0 F cm^?3 at 2000 mV s^?1), outstanding flexibility, remarkable energy (13.5 mWh cm^?3) and power density (48.5 W cm^?3).     

Sandwich‐Like Ultrathin TiS2 Nanosheets Confined within N,S Codoped Porous Carbon as an Effective Polysulfide Promoter in Lithium‐Sulfur Batteries

As the lightest member of transition metal dichalcogenides, 2D titanium disulfide (2D TiS₂) nanosheets are attractive for energy storage and conversion. However, reliable and controllable synthesis of single‐ to few‐layered TiS₂ nanosheets is challenging due to the strong tendency of stacking and oxidation of ultrathin TiS₂ nanosheets. This study reports for the first time the successful conversion of Ti₃C₂T_x MXene to sandwich‐like ultrathin TiS₂ nanosheets confined by N, S co‐doped porous carbon (TiS₂@NSC) via an in situ polydopamine‐assisted sulfuration process. When used as a sulfur host in lithium–sulfur batteries, TiS₂@NSC shows both high trapping capability for lithium polysulfides (LiPSs), and remarkable electrocatalytic activity for LiPSs reduction and lithium sulfide oxidation. A freestanding sulfur cathode integrating TiS₂@NSC with cotton‐derived carbon fibers delivers a high areal capacity of 5.9 mAh cm^?2 after 100 cycles at 0.1 C with a low electrolyte/sulfur ratio and a high sulfur loading of 7.7 mg cm^?2, placing TiS₂@NSC one of the best LiPSs adsorbents and sulfur conversion catalysts reported to date. The developed nanospace‐confined strategy will shed light on the rational design and structural engineering of metal sulfides based nanoarchitectures for diverse applications.     

Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management

2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti₃C₂T_x MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS₂) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm^?2) and still guarantee high steam‐generation performance (1.33 kg m^?2 h^?1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.     

All Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors

2D transition metal carbides and nitrides, known as MXenes, are an emerging class of 2D materials with a wide spectrum of potential applications, in particular in electrochemical energy storage. The hydrophilicity of MXenes combined with their metallic conductivity and surface redox reactions is the key for high‐rate pseudocapacitive energy storage in MXene electrodes. However, symmetric MXene supercapacitors have a limited voltage window of around 0.6 V due to possible oxidation at high anodic potentials. In this study, the fact that titanium carbide MXene (Ti₃C₂T_x) can operate at negative potentials in acidic electrolyte is exploited, to design an all‐pseudocapacitive asymmetric device by combining it with a ruthenium oxide (RuO₂) positive electrode. This asymmetric device operates at a voltage window of 1.5 V, which is about two times wider than the operating voltage window of symmetric MXene supercapacitors, and is the widest voltage window reported to date for MXene‐based supercapacitors. The complementary working potential windows of MXene and RuO₂, along with proton‐induced pseudocapacitance, significantly enhance the device performance. As a result, the asymmetric devices can deliver an energy density of 37 µW h cm^?2 at a power density of 40 mW cm^?2, with 86% capacitance retention after 20 000 charge–discharge cycles. These results show that pseudocapacitive negative MXene electrodes can potentially replace carbon‐based materials in asymmetric electrochemical capacitors, leading to an increased energy density.     

3D‐Printed Stretchable Micro‐Supercapacitor with Remarkable Areal Performance

While stretchable micro‐supercapacitors (MSCs) have been realized, they have suffered from limited areal electrochemical performance, thus greatly restricting their practical electronic application. Herein, a facile strategy of 3D printing and unidirectional freezing of a pseudoplastic nanocomposite gel composed of Ti₃C₂T_x MXene nanosheets, manganese dioxide nanowire, silver nanowires, and fullerene to construct intrinsically stretchable MSCs with thick and honeycomb‐like porous interdigitated electrodes is introduced. The unique architecture utilizes thick electrodes and a 3D porous conductive scaffold in conjunction with interacting material properties to achieve higher loading of active materials, larger interfacial area, and faster ion transport for significantly improved areal energy and power density. Moreover, the oriented cellular scaffold with fullerene‐induced slippage cell wall structure prompts the printed electrode to withstand large deformations without breaking or exhibiting obvious performance degradation. When imbued with a polymer gel electrolyte, the 3D‐printed MSC achieves an unprecedented areal capacitance of 216.2 mF cm^?2 at a scan rate of 10 mV s^?1, and remains stable when stretched up to 50% and after 1000 stretch/release cycles. This intrinsically stretchable MSC also exhibits high rate capability and outstanding areal energy density of 19.2 µWh cm^?2 and power density of 58.3 mW cm^?2, outperforming all reported stretchable MSCs.     

Achieving High Pseudocapacitance of 2D Titanium Carbide (MXene) by Cation Intercalation and Surface Modification

Supercapacitors attract great interest because of the increasing and urgent demand for environment‐friendly high‐power energy sources. Ti₃C₂, a member of MXene family, is a promising electrode material for supercapacitors owing to its excellent chemical and physical properties. However, the highest gravimetric capacitance of the MXene‐based electrodes is still relatively low (245 F g^?1) and the key challenge to improve this is to exploit more pseudocapacitance by increasing the active site concentration. Here, a method to significantly improve the gravimetric capacitance of Ti₃C₂T_x MXenes by cation intercalation and surface modification is reported. After K⁺ intercalation and terminal groups (OH^?/F^?) removing , the intercalation pseudocapacitance is three times higher than the pristine MXene, and MXene sheets exhibit a significant enhancement (about 211% of the origin) in the gravimetric capacitance (517 F g^?1 at a discharge rate of 1 A g^?1). Moreover, the as‐prepared electrodes show above 99% retention over 10 000 cycles. This improved electrochemical performance is attributed to the large interlayer voids of Ti₃C₂ and lowest terminated surface group concentration. This study demonstrates a new strategy applicable to other MXenes (Ti₂CT_x , Nb₂CT_x , etc.) in maximizing their potential applications in energy storage.     

Interface Engineering of MXene Composite Separator for High‐Performance Li–Se and Na–Se Batteries

Selenium (Se), due to its high electronic conductivity and high energy density, has recently attracted considerable interest as a cathode material for rechargeable Li/Na batteries. However, the poor cycling stability originating from the severe shuttle effect of polyselenides hinders their practical applications. Herein, highly stable Li/Na–Se batteries are developed using ultrathin (≈270 nm, loading of 0.09 mg cm^?2) cetrimonium bromide (CTAB)/carbon nanotube (CNT)/Ti₃C₂T_x MXene hybrid modified polypropylene (PP) (CCNT/MXene/PP) separators. The hybrid separator can immobilize the polyselenides via enhanced Lewis acid–base interactions between CTAB/MXene and polyselenides, which is demonstrated by theoretical calculations and X‐ray photoelectron spectroscopy. The incorporation of CNT helps to improve the electrolyte infiltration and facilitate the ionic transport. In situ permeation experiments are conducted for the first time to visually study the behavior of polyselenides, revealing the prohibited shuttle effect and protected Li anode from corrosion with CCNT/MXene/PP separators. As a result, the Li–Se batteries with CCNT/MXene/PP separators deliver an outstanding cycling performance over 500 cycles at 1C with an extremely low capacity decay of 0.05% per cycle. Moreover, the hybrid separators also perform well in Na–Se batteries. This study develops a preferable separator–electrolyte interface and the concept can be applied in other conversion‐type battery systems.     

Solving the Capacitive Paradox of 2D MXene using Electrochemical Quartz‐Crystal Admittance and In Situ Electronic Conductance Measurements

Fast ion adsorption processes in supercapacitors enable quick storage/delivery of significant amounts of energy, while ion intercalation in battery materials leads to even larger amounts of energy stored, but at substantially lower rates due to diffusional limitations. Intercalation of ions into the recently discovered 2D Ti₃C₂T_x (MXene) occurs with a very high rate and leads to high capacitance, posing a paradox. Herein, by characterizing the mechanical deformations of MXene electrode materials at various states‐of‐charge with a variety of cations (Li, Na, K, Cs, Mg, Ca, Ba, and three tetra­alkylammonium cations) during cycling by electrochemical quartz‐crystal admittance (EQCA, quartz‐crystal microbalance with dissipation monitoring) combined with in situ electronic conductance and electrochemical impedance, light is shone on this paradox. Based on this work, it appears that the capacitive paradox stems from cationic insertion, accompanied by significant deformation of the MXene particles, that occurs so rapidly so as to resemble 2D ion adsorption at solid‐liquid interfaces. The latter is greatly facilitated by the presence of water molecules between the MXene sheets.     

MXene‐Based Mesoporous Nanosheets Toward Superior Lithium Ion Conductors

Although solid polymer electrolytes have some intrinsic advantages in synthesis and film processing compared with inorganic solid electrolytes, low ionic conductivities and mechanical moduli hamper their practical applications in lithium‐based batteries. Here, an efficient strategy is developed to produce a unique solid polymer electrolyte containing MXene‐based mesoporous silica nanosheets with a sandwich structure, which are fabricated via controllable hydrolysis of tetraethyl orthosilicate around the surface of MXene‐Ti₃C₂ under the direction of cationic surfactants. Such unique nanosheets not only exhibit individual, thin, and insulated features, but also possess abundant functional groups in mesopores and on the surface, which are favorable for the formation of Lewis acid–base interactions with anions in polymer electrolytes such as poly(propylene oxide) elastomer, enabling the fast Li⁺ transportation at the mesoporous nanosheets/polymer interfaces. As a consequence, a solid polymer electrolyte with high ionic conductivity of 4.6 × 10^?4 S cm^?1, high Young's modulus of 10.5 MPa, and long‐term electrochemical stability is achieved.     

Spontaneous Atomic Ruthenium Doping in Mo2CTX MXene Defects Enhances Electrocatalytic Activity for the Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) process usually suffers extremely low Faradaic efficiency and ammonia yields due to sluggish N?N dissociation. Herein, single‐atomic ruthenium modified Mo₂CT_X MXene nanosheets as an efficient electrocatalyst for nitrogen fixation at ambient conditions are reported. The catalyst achieves a Faradaic efficiency of 25.77% and ammonia yield rate of 40.57 µg h^?1 mg^?1 at ‐0.3 V versus the reversible hydrogen electrode in 0.5 m K₂SO₄ solution. Operando X‐ray absorption spectroscopy studies and density functional theory calculations reveal that single‐atomic Ru anchored on MXene nanosheets act as important electron back‐donation centers for N₂ activation, which can not only promote nitrogen adsorption and activation behavior of the catalyst, but also lower the thermodynamic energy barrier of the first hydrogenation step. This work opens up a promising avenue to manipulate catalytic performance of electrocatalysts utilizing an atomic‐level engineering strategy.     

Dramatically Enhanced Ambient Ammonia Electrosynthesis Performance by In‐Operando Created Li–S Interactions on MoS2 Electrocatalyst

The Haber‐Bosch process can be replaced by the ambient electrocatalytic N₂ reduction reaction (NRR) to produce NH₃ if suitable electrocatalysts can be developed. However, to develop high performance N₂ fixation electrocatalysts, a key issue to be resolved is to achieve efficient hydrogenation of N₂ without interference by the thermodynamically favored hydrogen evolution reaction (HER). Herein, in‐operando created strong Li–S interactions are reported to empower the S‐rich MoS₂ nanosheets with superior NRR catalytic activity and HER suppression ability. The Li⁺ interactions with S‐edge sites of MoS₂ can effectively suppress hydrogen evolution reaction by reducing H* adsorption free energy from 0.03 to 0.47 eV, facilitate N₂ adsorption by increasing N₂ adsorption free energy from –0.32 to –0.70 eV and enhance electrocatalytic N₂ reduction activity by decreasing the activation energy barrier of the reaction control step (*N₂ → *N₂H) from 0.84 to 0.42 eV. A NH₃ yield rate of 43.4 μg h^?1 mg^?1 MoS₂ with a faradaic efficiency (FE) of 9.81% can be achieved in presence of strong Li–S interactions, more than 8 and 18 times by the same electrocatalyst in the absence of Li–S interactions. This report opens a new way to design and develop catalysts and catalysis systems.     

Self‐Assemble and In Situ Formation of Ni1−xFexPS3 Nanomosaic‐Decorated MXene Hybrids for Overall Water Splitting

Herein, the authors present the development of novel 0D–2D nanohybrids consisting of a nickel‐based bimetal phosphorus trisulfide (Ni_1?xFe_xPS₃) nanomosaic that decorates on the surface of MXene nanosheets (denoted as NFPS@MXene). The nanohybrids are obtained through a facile self‐assemble process of transition metal layered double hydroxide (TMLDH) on MXene surface; followed by a low temperature in situ solid‐state reaction step. By tuning the Ni:Fe ratio, the as‐synthesized NFPS@MXene nanohybrids exhibit excellent activities when tested as electrocatalysts for overall water splitting. Particularly, with the initial Ni:Fe ratio of 7:3, the obtained Ni_0.7Fe_0.3PS₃@MXene nanohybrid reveals low overpotential (282 mV) and Tafel slope (36.5 mV dec^?1) for oxygen evolution reaction (OER) in 1 m KOH solution. Meanwhile, the Ni_0.9Fe_0.1PS₃@MXene shows low overpotential (196 mV) for the hydrogen evolution reaction (HER) in 1 m KOH solution. When integrated for overall water splitting, the Ni_0.7Fe_0.3PS₃@MXene || Ni_0.9Fe_0.1PS₃@MXene couple shows a low onset potential of 1.42 V and needs only 1.65 V to reach a current density of 10 mA cm^?2, which is better than the all noble metal IrO₂ || Pt/C electrocatalyst (1.71 mV@10 mA cm^?2). Given the chemical versatility of Ni_1?xFe_xPS₃ and the convenient self‐assemble process, the nanohybrids demonstrated in this work are promising for energy conversion applications.