Biosynthesis of the cyanobacterial reserve polymer multi-L-arginyl-poly-L-aspartic acid (cyanophycin): mechanism of the cyanophycin synthetase reaction studied with synthetic primers.

Biosynthesis of the cyanobacterial nitrogen reserve cyanophycin (multi-L-arginyl-poly-L-aspartic acid) is catalysed by cyanophycin synthetase, an enzyme that consists of a single kind of polypeptide. Efficient synthesis of the polymer requires ATP, the constituent amino acids aspartic acid and arginine, and a primer like cyanophycin. Using synthetic peptide primers, the course of the biosynthetic reaction was studied. The following results were obtained: (a) sequence analysis suggests that cyanophycin synthetase has two ATP-binding sites and hence probably two active sites; (b) the enzyme catalyses the formation of cyanophycin-like polymers of 25-30 kDa apparent molecular mass in vitro; (c) primers are elongated at their C-terminus; (d) the constituent amino acids are incorporated stepwise, in the order aspartic acid followed by arginine, into the growing polymer. A mechanism for the cyanophycin synthetase reaction is proposed; (e) the specificity of the enzyme for its amino-acid substrates was also studied. Glutamic acid cannot replace aspartic acid as the acidic amino acid, whereas lysine can replace arginine but is incorporated into cyanophycin at a much lower rate.     

Isolation and characterization of a novel cyanophycin synthetase from a deep-sea sediment metagenomic library

Cyanophycin is non-ribosomally synthesized protein-like copolymer. Synthesis of cyanophycin is catalyzed by cyanophycin synthetase (CphA). In this study, a novel cyanophycin synthetase CphA49 belonging to NOR5 clade of Gammaproteobacteria was identified with primer-based screening from a deep-sea sediment metagenomic library. The cphA49 gene contained an open reading frame of 2,637 bp and encoded a protein with a predicted molecular mass of 100 kDa. A recombinant CphA49 was obtained by the functional expression of cphA49 in Escherichia coli BL21 (DE3). The biochemical properties of the purified CphA49 were determined. The optimum pH and temperature of the recombinant CphA49 were 9.0 and 40 °C, respectively. The enzyme was stable at temperatures below 40 °C. The recombinant CphA49 exhibited strict primer dependency and broad substrate specificities. Cyanophycin catalyzed by CphA49 exhibited homogenous molecular mass. The amino acid composition of cyanophycin was determined and constitutes arginine, aspartic acid, and lysine.     

Purification and characterization of cyanophycin and cyanophycin synthetase from the thermophilic Synechococcus sp. MA19

The biosynthesis and accumulation of cyanophycin in the thermophilic cyanobacterium Synechococcus sp. MA19 were studied. By growing the cells in a 80-l closed tubular photobioreactor under controlled conditions, the cells accumulated cyanophycin amounting up to 3.5% of the dry cell matter. The cyanophycin was purified and chemical analysis showed that it was composed of arginine and aspartic acid occurring at a molar ratio of 1:0.9. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed a broad distribution of the apparent molecular masses ranging from 20 to 130 kDa with a maximum at 50 kDa. During a three-step purification procedure involving ion exchange chromatography and gel filtration, the cyanophycin synthetase from strain MA19 was purified 144-fold to electrophoretic homogeneity. It consisted of only one single type of subunit exhibiting an apparent molecular mass of 130 kDa. The enzyme catalyzed the polymerization of arginine and aspartate at elevated temperatures and was even active at 80 degrees C.     

Synthesis and accumulation of cyanophycin in transgenic strains of Saccharomyces cerevisiae

Cyanophycin [multi-L-arginyl-poly(L-aspartic acid) (CGP)] was, for the first time, produced in yeast. As yeasts are very important production organisms in biotechnology, it was determined if CGP can be produced in two different strains of Saccharomyces cerevisiae. The episomal vector systems pESC (with the galactose-inducible promoter GAL1) and pYEX-BX (with the copper ion-inducible promoter CUP1) were chosen to express the cyanophycin synthetase gene from the cyanobacterium Synechocystis sp. strain PCC 6308 (cphA(6308)) in yeast. Expression experiments with transgenic yeasts revealed that the use of the CUP1 promoter is much more efficient for CGP production than the GAL1 promoter. As observed by electrophoresis of isolated CGP in sodium dodecyl sulfate-polyacrylamide gels, the yeast strains produced two different types of polymer: the water-soluble and the water-insoluble CGP were observed as major and minor forms of the polymer, respectively. A maximum CGP content of 6.9% (wt/wt) was detected in the cells. High-performance liquid chromatography analysis showed that the isolated polymers consisted mainly of the two amino acids aspartic acid and arginine and that, in addition, a minor amount (2 mol%) of lysine was present. Growth of transgenic yeasts in the presence of 15 mM lysine resulted in an incorporation of up to 10 mol% of lysine into CGP. Anti-CGP antibodies generated against CGP isolated from Escherichia coli TOP10 harboring cphA(6308) reacted with insoluble CGP but not with soluble CGP, if applied in Western or dot blots.     

Purification of Synechocystis sp. strain PCC6308 cyanophycin synthetase and its characterization with respect to substrate and primer specificity

Synechocystis sp. strain PCC6308 cyanophycin synthetase was purified 72-fold in three steps by anion exchange chromatography on Q Sepharose, affinity chromatography on the triazine dye matrix Procion Blue HE-RD Sepharose, and gel filtration on Superdex 200 HR from recombinant cells of Escherichia coli. The native enzyme, which catalyzed the incorporation of arginine and aspartic acid into cyanophycin, has an apparent molecular mass of 240 +/- 30 kDa and consists of identical subunits of 85 +/- 5 kDa. The K(m) values for arginine (49 microM), aspartic acid (0.45 mM), and ATP (0.20 mM) indicated that the enzyme had a high affinity towards these substrates. During in vitro cyanophycin synthesis, 1.3 +/- 0.1 mol of ATP per mol of incorporated amino acid was converted to ADP. The optima for the enzyme-catalyzed reactions were pH 8.2 and 50 degrees C, respectively. Arginine methyl ester (99.5 and 97% inhibition), argininamide (99 and 96%), S-(2-aminoethyl) cysteine (43 and 42%), beta-hydroxy aspartic acid (35 and 37%), aspartic acid beta-methyl ester (38 and 40%), norvaline (0 and 3%), citrulline (9 and 7%), and asparagine (2 and 0%) exhibited an almost equal inhibitory effect on the incorporation of both arginine and aspartic acid, respectively, when these compounds were added to the complete reaction mixture. In contrast, the incorporation of arginine was diminished to a greater extent than that of aspartic acid, respectively, with canavanine (82 and 53%), lysine (36 and 19%), agmatine (33 and 25%), D-aspartic acid (37 and 30%), L-glutamic acid (13 and 5%), and ornithine (23 and 11%). On the other hand, canavanine (45% of maximum activity) and lysine (13%) stimulated the incorporation of aspartic acid, whereas aspartic acid beta-methyl ester (53%) and asparagine (9%) stimulated the incorporation of arginine. [(3)H]lysine (15% of maximum activity) and [(3)H]canavanine (13%) were incorporated into the polymer, when they were either used instead of arginine or added to the complete reaction mixture, whereas L-glutamic acid was not incorporated. No effect on arginine incorporation was obtained by the addition of other amino acids (i.e., alanine, histidine, leucine, proline, tryptophan, and glycine). Various samples of chemically synthesized poly-alpha,beta-D,L-aspartic acid served as primers for in vitro synthesis of cyanophycin, whereas poly-alpha-L-aspartic acid was almost inactive.     

Investigations on the solubility behavior of cyanophycin. Solubility of cyanophycin in solutions of simple inorganic salts

On the basis of a previous report on the occurrence of water-soluble cyanophycin (CGP, cyanophycin granule polypeptide) in a recombinant strain of Escherichia coli expressing the cyanophycin synthetase (CphA) of Desulfitobacterium hafniense published by others, the conditions of its production were investigated in this study. Although the incubation temperature, aeration level, and NaCl concentration during cultivation had effects on the in vivo production of water-soluble CGP, it could be isolated as a major variant irrespective of the cultivation conditions. The occurrence of the soluble variant was also not dependent on the E. coli host or on the origin of cphA. Furthermore, it was shown that water-insoluble CGP can be in vitro solubilized to extents of up to about 80% (w/w) in solutions of different inorganic salts such as LiCl, NaCl, KCl, RbCl, KBr, MgCl(2), or CaCl(2). Evidence was obtained that the salt ions bind tightly to CGP. If the ions were not removed from the salt solution by dialysis or dilution, the CGP remained stable in solution. This method to solubilize water-insoluble CGP could also be applied to high concentrations of the polymer. CGP that remained insoluble after the first treatment could only marginally be solubilized in following treatments. The polydisperse CGP molecules were solubilized to the same extent over the whole molecular weight range with no preference of a particular molecular weight.     

Molecular characterization of a thermostable cyanophycin synthetase from the thermophilic cyanobacterium Synechococcus sp. strain MA19 and in vitro synthesis of cyanophycin and related polyamides.

The thermophilic cyanobacterium Synechococcus sp. strain MA19 contained the structural genes for cyanophycin synthetase (cphA) and cyanophycinase (cphB), which were identified, cloned, and sequenced in this study. The translation products of cphA and cphB exhibited high levels of similarity to corresponding proteins of other cyanobacteria, such as Anabaena variabilis and Synechocystis sp. Recombinant cells of Escherichia coli harboring cphA colinear with lacPO accumulated cyanophycin that accounted for up to 25% (wt/wt) of the dry cell matter in the presence of isopropyl-beta-D-thiogalactopyranoside (IPTG). The cyanophycin synthetase was enriched 123-fold to electrophoretic homogeneity from the soluble fraction of the recombinant cells by anion-exchange chromatography, affinity chromatography, and gel filtration chromatography. The purified cyanophycin synthetase maintained the parental thermophilic character and was active even after prolonged incubation at 50 degrees C; in the presence of ectoine the enzyme retained 90% of its activity even after 2 h of incubation. The in vitro activity of the enzyme depended on ATP, primers, and both substrates, L-arginine and L-aspartic acid. In addition to native cyanophycin, the purified enzyme accepted a modified cyanophycin containing less arginine, alpha-arginyl aspartic acid dipeptide, and poly-alpha,beta-DL-aspartic acid as primers and also incorporated beta-hydroxyaspartic acid instead of L-aspartic acid or L-canavanine instead of L-arginine at a significant rate. The lack of specificity of this thermostable enzyme with respect to primers and substrates, the thermal stability of the enzyme, and the finding that the enzyme is suitable for in vitro production of cyanophycin make it an interesting candidate for biotechnological processes.     

Production of cyanophycin in <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> through the expression of a cyanophycin synthetase encoding gene

Cyanophycin or cyanophycin granule peptide is a protein that results from non-ribosomal protein synthesis in microorganisms such as cyanobacteria. The amino acids in cyanophycin can be used as a feedstock in the production of a wide range of chemicals such as acrylonitrile, polyacrylic acid, 1,4-butanediamine, and urea. In this study, an auxotrophic mutant (Rhizopus oryzae M16) of the filamentous fungus R. oryzae 99-880 was selected to express cyanophycin synthetase encoding genes. These genes originated from Synechocystis sp. strain PCC6803, Anabaena sp. strain PCC7120, and a codon optimized version of latter gene. The genes were under control of the pyruvate decarboxylase promoter and terminator elements of R. oryzae. Transformants were generated by the biolistic transformation method. In only two transformants both expressing the cyanophycin synthetase encoding gene from Synechocystis sp. strain PCC6803 was a specific enzyme activity detected of 1.5 mU/mg protein. In one of these transformants was both water-soluble and insoluble cyanophycin detected. The water-soluble fraction formed the major fraction and accounted for 0.5% of the dry weight. The water-insoluble CGP was produced in trace amounts. The amino acid composition of the water-soluble form was determined and constitutes of equimolar amounts of arginine and aspartic acid.     

Expression of Synechocystis sp. PCC6803 cyanophycin synthetase in Lactococcus lactis nisin-controlled gene expression system (NICE) and cyanophycin production

Cyanophycin is a natural source of polypetide consisting of aspartic acid as a backbone and arginine as its side chain. After the removal of arginine, the remaining poly-aspartate can be served in numerous industrial and biomedical applications. The synthesis of cyanophycin is catalyzed by cyanophycin synthetase. In this study, we used lactic acid bacteria to produce cyanophycin by nisin-controlled gene expression system (NICE). The cyanophycin synthetase gene cphA of Synechocystis sp. strain PCC6803 was cloned to the vector pNZ8149 followed by transformation into Lactococcus lactis subsp. cremoris NZ3900. The effects of nisin concentrations and the amounts of supplemented aspartic acid and arginine were examined for the production of cyanophycin. Alterations of the terminus of cphA gene were also conducted in an attempt to increase the yield of cyanophycin. An optimal cyanophycin production was noted under a culture condition of log phase induced at 250 ng/mL nisin in M17L medium supplemented with 20 mM arginine and 10 mM aspartic acid. An insertion of glycine residue at the C terminus of cyanophycin synthetase resulted in a yield of 20% of dry cell weight, a 10-fold increase when compared with the wild type. The results showed that recombinant lactic acid bacteria, a GRAS system, could provide an alternative approach of producing cyanophycin suitable for agricultural and biomedical applications.     

Protamylasse, a residual compound of industrial starch production, provides a suitable medium for large-scale cyanophycin production

Protamylasse is a residual compound occurring during the industrial production of starch from potatoes. It contains a variety of nutrients and all necessary minerals and could be used as a carbon, nitrogen, and energy source for the growth of bacteria and also for cyanophycin (CGP) biosynthesis. Media containing protamylasse as the sole compound diluted only in water were therefore examined for their suitability in CGP production. Among various bacterial strains investigated in this study, a recombinant strain of Escherichia coli DH1 harboring plasmid pMa/c5-914::cphA6803, which carries the cyanophycin synthetase structural gene (cphA) from Synechocystis sp. strain PCC6803, was found to be most suitable. Various cultivation conditions for high CGP contents were first optimized in shake flask cultures. The optimized conditions were then successfully applied to 30- and 500-liter fermentation scales in stirred tank reactors. A maximum CGP content of 28% (wt/wt) CGP per cell dry matter was obtained in 6% (vol/vol) protamylasse medium at an initial pH of 7.0 within a cultivation period of only 24 h. The CGP contents obtained with this recombinant strain employing protamylasse medium were higher than those obtained with the same strain cultivated in mineral salts medium or in expensive commercial complex media such as Luria-Bertani or Terrific broth. It was shown that most amino acids present in the protamylasse medium were almost completely utilized by the cells during cultivation. Exceptions were alanine, tryptophan, tyrosine, and most interestingly, arginine. Furthermore, CGP was easily isolated from protamylasse-grown cells by applying the acid extraction method. The CGP exhibited a molecular mass of about 26 to 30 kDa and was composed of 50% (mol/mol) aspartate, 46% (mol/mol) arginine, and 4% (mol/mol) lysine. The use of cheap residual protamylasse could contribute in establishing an economically and also ecologically feasible process for the biotechnological production of CGP.     

Physiological conditions conducive to high cyanophycin content in biomass of Acinetobacter calcoaceticus strain ADP1

The effects of the inorganic medium components, the initial pH, the incubation temperature, the oxygen supply, the carbon-to-nitrogen ratio, and chloramphenicol on the synthesis of cyanophycin (CGP) by Acinetobacter calcoaceticus strain ADP1 were studied in a mineral salts medium containing sodium glutamate and ammonium sulfate as carbon and nitrogen sources, respectively. Variation of all these factors resulted in maximum CGP contents of only about 3.5% (wt/wt) of the cell dry matter (CDM), and phosphate depletion triggered CGP accumulation most substantially. However, addition of arginine to the medium as the sole carbon source for growth promoted CGP accumulation most strikingly. This effect was systematically studied, and an optimized phosphate-limited medium containing 75 mM arginine and 10 mM ammonium sulfate yielded a CGP content of 41.4% (wt/wt) of the CDM at 30 degrees C. The CGP content of the cells was further increased to 46.0% (wt/wt) of the CDM by adding 2.5 microg of chloramphenicol per ml of medium in the accumulation phase. These contents are by far the highest CGP contents of bacterial cells ever reported. CGP was easily isolated from the cells by using an acid extraction method, and this CGP contained about equimolar amounts of aspartic acid and arginine and no detectable lysine; the molecular masses ranged from 21 to 29 kDa, and the average molecular mass was about 25 kDa. Transmission electron micrographs of thin sections of cells revealed large CGP granules that frequently had an irregular shape with protuberances at the surface and often severely deformed the cells. A cphI::OmegaKm mutant of strain ADP1 with a disrupted putative cyanophycinase gene accumulated significantly less CGP than the wild type accumulated, although the cells expressed cyanophycin synthetase at about the same high level. It is possible that the intact CphI protein is involved in the release of CGP primer molecules from initially synthesized CGP. The resulting lower concentration of primer molecules could explain the observed low rate of accumulation at similar specific activities.     

Synthesis of a citrulline-rich cyanophycin by use of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> ATCC 4359

Synthesis of cyanophycin (multi-l-arginyl-poly-l-aspartic acid, CGP) in recombinant organisms is an important option to obtain sufficiently large amounts of this polymer with a designed composition for use as putative precursors for biodegradable technically interesting chemicals. Therefore, derivates of CGP, harbouring a wider range of constituents, are of particular interest. As shown previously, cyanophycin synthetases with wide substrate ranges incorporate other amino acids than arginine. Therefore, using an organism, which produces the required supplement by itself, was the next logical step. Former studies showed that Pseudomonas putida strain ATCC 4359 is able to produce large amounts of l-citrulline from l-arginine. By expressing the cyanophycin synthetase of Synechocystis sp. PCC 6308, synthesis of CGP was observed in P. putida ATCC 4359. Using an optimised medium for cultivation, the strain was able to synthesise insoluble CGP amounting up to 14.7 ± 0.7% (w/w) and soluble CGP amounting up to 28.7 ± 0.8% (w/w) of the cell dry matter, resulting in a total CGP content of the cells of 43.4% (w/w). HPLC analysis of the soluble CGP showed that it was composed of 50.4 ± 1.3 mol % aspartic acid, 32.7 ± 2.8 mol % arginine, 8.7 ± 1.6 mol % citrulline and 8.3 ± 0.4 mol % lysine, whereas the insoluble CGP contained less than 1 mol % of citrulline. Using a mineral salt medium with 1.25 or 2% (w/v) sodium succinate, respectively, plus 23.7 mM l-arginine, the cells synthesised insoluble CGP amounting up to 25% to 29% of the CDM with only a very low citrulline content.     

Engineered cyanophycin synthetase (CphA) from Nostoc ellipsosporum confers enhanced CphA activity and cyanophycin accumulation to Escherichia coli

The cyanophycin (CGP) synthetase gene (cphANE1) of the transposon-induced argL mutant NE1 of the cyanobacterium Nostoc ellipsosporum, which exhibits a CGP-leaky phenotype during diazotrophical growth, was cloned and expressed in Escherichia coli strain TOP10. Its amino acid sequence exhibited high similarities to CphAs of other cyanobacteria. Recombinant cells of E. coli, which harbored a fragment comprising the complete cphANE1 gene plus 400 bp of its downstream region in colinear orientation to the lacZ promoter, accumulated CGP up to 17 and 8.5% (wt/wt) of cellular dry matter (CDM) if cultivated in complex medium in the presence or absence of isopropyl-beta-D-thiogalactopyranoside, respectively. Two truncated CphAs, lacking 31 (CphANE1del96) or 59 (CphANE1del180) amino acids of the C-terminal region, were derived from cphANE1 by deleting 96 or 180 bp from its 3' region through the introduction of stop codons. In comparison to the wild-type gene, cphANE1del96 conferred about 2.1- to 2.2-fold-higher enzyme activity (up to 5.75 U/mg protein) on E. coli. Furthermore, these cells accumulated about twofold more CGP (up to 34.5% [wt/wt] of CDM) than cells expressing the wild-type gene. An engineered CphA possessing significantly enhanced activity and conferring the highest CGP content on E. coli is demonstrated. In contrast, CphANE1del180 was inactive and did not confer CGP accumulation on E. coli. Interestingly, a short conserved stretch of 4 to 5 hydrophobic amino acids is located in the protein region present in CphANE1del96 but absent in CphANE1del180. In addition, CphANE1 and CphANE1del96 are, besides CphA from Acinetobacter baylyi, the only CphAs exhibiting rigid substrate specificities that do not enable the incorporation of lysine instead of arginine into CGP.     

Tuber-specific cphA expression to enhance cyanophycin production in potatoes

The production of biodegradable polymers that can be used to substitute petrochemical compounds in commercial products in transgenic plants is an important challenge for plant biotechnology. Nevertheless, it is often accompanied by reduced plant fitness. To decrease the phenotypic abnormalities of the sprout and to increase polymer production, we restricted cyanophycin accumulation to the potato tubers by using the cyanophycin synthetase gene ( cph A_Te) from Thermosynechococcus elongatus BP-1, which is under the control of the tuber-specific class 1 promoter (B33). Tuber-specific cytosolic (pB33- cph A_Te) as well as tuber-specific plastidic (pB33-PsbY- cph A_Te) expression resulted in significant polymer accumulation solely in the tubers. In plants transformed with pB33- cph A_Te, both cyanophycin synthetase and cyanophycin were detected in the cytoplasm leading to an increase up to 2.3% cyanophycin of dry weight and resulting in small and deformed tubers. In B33-PsbY- cph A_Te tubers, cyanophycin synthetase and cyanophycin were exclusively found in amyloplasts leading to a cyanophycin accumulation up to 7.5% of dry weight. These tubers were normal in size, some clones showed reduced tuber yield and sometimes exhibited brown sunken staining starting at tubers navel. During a storage period over of 32 weeks of one selected clone, the cyanophycin content was stable in B33-PsbY- cph A_Te tubers but the stress symptoms increased. However, all tubers were able to germinate. Nitrogen fertilization in the greenhouse led not to an increased cyanophycin yield, slightly reduced protein content, decreased starch content, and changes in the amounts of bound and free arginine and aspartate, as compared with control tubers were observed.     

Rendered-protein hydrolysates for microbial synthesis of cyanophycin biopolymer

Cyanophycin is a poly(arginyl-aspartate) biopolymer produced and stored intracellularly by bacteria. Cyanophycin has been proposed as a renewable replacement for petrochemical-based industrial products. An abundant source of amino acids and nitrogen such as in the form of protein hydrolysates is needed for the biosynthesis of cyanophycin. Rendered proteins are largely used as a feed supplement in animal husbandry and aquaculture. New uses would expand the market size of this class of protein coproducts. We prepared and thoroughly characterized the hydrolysates of meat and bone meal, and proceeded to demonstrate for the first time that these hydrolysates could be used in the fermentative production of cyanophycin. Using the enzyme-hydrolyzed meat and bone meal preparation, we obtained crude cyanophycin product at 33-35% level of that produced using the reference casamino acids in both shake-flask and 10-L bioreactor fermentation studies. Polyacrylamide-gel electrophoresis of the cyanophycin under denaturing conditions showed the molecular weight of the isolated polyamide at 24kDa. Our results open a new avenue for the utilization of rendered protein coproducts to produce the cyanophycin biopolymer.     

Identification of the Anabaena sp. strain PCC7120 cyanophycin synthetase as suitable enzyme for production of cyanophycin in gram-negative bacteria like Pseudomonas putida and Ralstonia eutropha

The cyanophycin synthetase gene cphA1 encoding the major cyanophycin synthetase (CphA) of Anabaena sp. strain PCC7120 was expressed in Escherichia coli conferring so far the highest specific CphA activity to E. coli (6.7 nmol arginine per min and mg protein). CphA1 and cphA genes of Synechocystis sp. strains PCC6803 and PCC6308 and Synechococcus strain MA19 were also expressed in wild types and polyhydroxyalkanoate-negative (PHA) mutants of Pseudomonas putida and Ralstonia eutropha. Recombinant strains of these bacteria expressing cphA1 accumulated generally more cyanophycin (23.0 and 20.0% of cellular dry matter, CDM, respectively) than recombinants expressing any other cphA (6.8, 9.0, or 15.8% of CDM for P. putida strains and 7.3, 12.6, or 14.1% of CDM for R. eutropha). Furthermore, PHA-negative mutants of P. putida (9.7, 10.0, 17.5, or 24.0% of CDM) and R. eutropha (8.9, 13.8, 16.0, or 22.0% of CDM) accumulated generally more cyanophycin than the corresponding PHA-positive parent strains (6.8, 9.0, 15.8, and 23.0% of CDM for P. putida strains and 7.3, 12.6, 14.1, or 20.0% of CDM for R. eutropha strains). Recombinant strains of Gram-positive bacteria (Bacillus megaterium, Corynebacterium glutamicum) were not suitable for cyanophycin production due to accumulation of less cyanophycin and retarded release of cyanophycin. PHA-negative mutants of P. putida and R. eutropha expressing cphA1 of Anabaena sp. strain PCC7120 are therefore preferred candidates for industrial production of cyanophycin.     

Cyanophycin synthetase-like enzymes of non-cyanobacterial eubacteria: characterization of the polymer produced by a recombinant synthetase of Desulfitobacterium hafniense

Some bacterial genomes were found to contain genes encoding putative proteins with considerable sequence homology to cyanophycin synthetase CphA of cyanobacteria. Such a gene from the Gram-positive, spore-forming anaerobe Desulfitobacterium hafniense was cloned. Expression in Escherichia coli resulted in the formation of a polydispers copolymer of aspartic acid and arginine, with a minor amount of lysine, of about 30 kDa molecular mass. In contrast to cyanophycin, this polymer was water-soluble. The structure of the polymer formed by the synthetase from Desulfitobacterium hafniense was studied by enzymatic degradation with the cyanophycin-specific hydrolase cyanophycinase, and by chemical and mass-spectroscopic analyses. Despite of the differences in solubility, indicating that both polymers cannot be completely identical, the chemical structure was found to be very similar to that of cyanophycin. The results suggest that the use of cyanophycin-like polymers as a nitrogen-rich reserve material is not restricted to cyanobacteria, and that such polymers may not necessarily be stored in granules.     

Molecular characterization of the cyanophycin synthetase from Synechocystis sp. strain PCC6308

A 3878-bp genomic region from the cyanobacterium Synechocystis sp. strain PCC6308, amplified by inverse PCR, harbored the structural genes cphA (2625 bp) and cphB (819 bp) encoding cyanophycin synthetase and cyanophycinase, respectively. Both primary structures exhibited a high degree of similarity to the corresponding translational products from other cyanobacteria. Five regions were localized in the cyanophycin synthetase consensus sequence by their resemblance to conserved sites of ATP-dependent carboxylate-amine/thiol ligases and three substrate ligases. The functionality of cphA was proven by heterologous expression of active enzyme and synthesis of cyanophycin in Escherichia coli, which led to a maximum cyanophycin content of 26.6% (w/w) of cell dry mass. Furthermore, a modified radiometric enzyme assay for a more reliable and feasible measurement of cyanophycin synthetase activity was developed and applied to reveal the substrate specificity of the enzyme.     

Identification and localization of cyanophycin in bacteria cells via imaging of the nitrogen distribution using energy-filtering transmission electron microscopy

In this study the technique of energy-filtering transmission electron microscopy was applied to localize cyanophycin (CGP) in recombinant strains of Ralstonia eutropha. Since CGP is a polymer consisting of the amino acids aspartate and arginine, which functions as a temporary nitrogen reserve that is deposited as insoluble inclusions in the cytoplasm of the cell, its nitrogen content is significantly higher than that of the other cell matter. In this study, we recorded nitrogen distribution maps, which represent the location of CGP in ultrathin sections of resin-embedded cells of recombinant strains of R. eutropha expressing the cyanophycin synthetase of Anabaena sp. strain PCC 7120. Furthermore, the existence of nitrogen in CGP granules was additionally proven by recording electron energy-loss spectra. The samples of R. eutropha H16 (pBBR1MCS-2::cphA1(7120)) revealed a second type of granule, which does not show nitrogen in the corresponding maps and which can be identified as an inclusion containing poly(3-hydroxybutyric acid). The methods applied in this study are suitable to identify storage compounds with elevated nitrogen contents and to reveal their location in the bacterial cell. The methods are also very helpful to distinguish between inclusions of different chemical compositions that occur both at the same time in the cells but cannot or only hardly be distinguished by other methods.