Adsorption of a strong polyelectrolyte to model lignin surfaces

The adsorption of a strong, highly charged cationic polyelectrolyte to a kraft lignin thin film was investigated as a function of the adsorbing solution conditions using the quartz crystal microbalance. The polyelectrolyte, PDADMAC, with a molecular weight of 100 kDa and one cationic charge group per monomer, was adsorbed to the anionically charged lignin film in the pH range 3.5-9.5 in electrolyte solution of 0.1 to 100 mM NaCl. At low pH, the adsorbed amount of PDADMAC was minimal, however, this increased as a function of increasing pH. Indeed, the surface excess increased significantly at about pH 8.5, where ionization of the phenolic groups on the lignin macromolecule may be expected. Furthermore, at this elevated pH, the adsorbed amount of PDADMAC decreased as the ionic strength of the solution increased above 1 mM. This is due to the competitive adsorption of counterions to the lignin surface and indicates that the adsorption of PDADMAC to lignin is of a pure electrosorption nature.     

Capacitance–voltage and impedance characteristics of field-effect EIS sensors functionalised with polyelectrolyte multilayers

Impedance-spectroscopy (IS) and capacitance–voltage characteristics of a field-effect-based electrolyte–insulator–semiconductor (EIS) sensor functionalised with polyelectrolyte (PE) multilayers have been investigated. The PE multilayers were obtained using the layer-by-layer technique by a consecutive adsorption of positively charged (poly(allylamine hydrochloride)) (PAH) and negatively charged (poly(sodium 4-styrene sulfonate)) (PSS) on a p-Si–SiO₂ structure. Alternating shifts in the impedance and capacitance–voltage curves have been observed after the adsorption of each polyanion and polycation layer, respectively. The effects of the number of the adsorbed PE layers and polarity of the outermost layer on the impedance and capacitance–voltage curves are discussed.     

pH dependence and protein selectivity of poly(ethyleneimine)/poly(acrylic acid) multilayers studied by in situ ATR-FTIR spectroscopy

The selective interaction between polyelectrolyte multilayers (PEM) consecutively adsorbed from poly(ethyleneimine) (PEI) and poly(acrylic acid) (PAC) and a binary mixture containing concanavalin A (COA) and lysozyme (LYZ) based on electrostatic interaction is reported. The composition and structure of the PEM and the uptake of proteins were analyzed by in situ attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopy, and the morphology and thickness were characterized by atomic force microscopy (AFM) and ellipsometry. The PEM dissociation degree and charge state and the protein adsorption were shown to be highly dependent on the outermost layer type and the pH in solution. High protein uptake was obtained under electrostatically attractive conditions. This was used to bind selectively one protein from a binary mixture of LYZ/COA. In detail it could be demonstrated that six-layered PEM-6 at pH = 7.3 showed a preferential sorption of positively charged LYZ, while at PEM-5 and pH = 7.3 negatively charged COA could be selectively bound. No protein sorption from the binary mixture was observed at pH = 4.0 for both PEM, when COA, LYZ, and the outermost PEI layer of PEM-5 were positively charged or the outermost PAC layer of PEM-6 was neutral. Furthermore, from factor analysis of the spectral data the higher selectivity was found for PEM-5 compared to PEM-6. Increasing the ionic strength revealed a drastic decrease in the selectivity of both PEM. Evidence was found that the proteins were predominantly bound at the surface and to a minor extent in the bulk phase of PEM. These results suggest possible working regimes and application fields of PEI/PAC multilayer assemblies related to the preparative separation of binary and multicomponent protein mixtures (biofluids, food) as well as to the design of selective protein-resistant surfaces.     

Colloidal force spectroscopy and cell biological investigations on biomimetic polyelectrolyte multilayer coatings composed of chondroitin sulfate and heparin

To promote osteoblast adhesion and proliferation on (bio)material surfaces, biomimetic coatings resembling the natural extracellular matrix (ECM) are desirable. The glycosamino glycans (GAGs) chondroitin sulfate (CS) and heparin (HEP) are promising candidates for a biomimetic coating since they are two of the most prevalent noncollagenous biomolecules constituting the ECM. Coatings containing CS and HEP were prepared employing the "layer by layer" technique yielding polyelectrolyte multilayers (PEMs). Physicochemical and mechanical characterization of the coatings were performed by means of streaming potential measurements and colloidal force spectroscopy. The capability of the coatings to support cell adhesion, spreading, proliferation, and maintenance of an osteoblastic phenotype was assessed with SaOS osteosarcoma cells. We demonstrate that PEMs constructed from CS as the polyanion display a low Young's modulus correlated with poorly supported cell adhesion and proliferation. When the CS was adsorbed onto a stiffer polypeptide PEM basis, the Young's modulus increased, and the cell response was significantly improved. For HEP coatings an intermediate Young's modulus and moderate cell adhesion and spreading were observed. No significant changes in stiffness or cell response were detected when HEP was adsorbed onto the polypeptide film.     

Layer-by-layer self-assembly of chitosan and poly(γ-glutamic acid) into polyelectrolyte complexes

Chitosan (Ch) is a nontoxic and biocompatible polysaccharide extensively used in biomedical applications. Ch, as a polycation, can be combined with anionic polymers by layer-by-layer (LbL) self-assembly, giving rise to multilayered complexed architectures. These structures can be used in tissue engineering strategies, as drug delivery systems, or artificial matrices mimicking the extracellular microenvironment. In this work, Ch was combined with poly(γ-glutamic acid) (γ-PGA). γ-PGA is a polyanion, which was microbially produced, and is known for its low immunogenic reaction and low cytotoxicity. Multilayered ultrathin films were assembled by LbL, with a maximum of six layers. The interaction between both polymers was analyzed by: ellipsometry, quartz crystal microbalance with dissipation, Fourier transform infrared spectroscopy, atomic force microscopy, and zeta potential measurements. Ch/γ-PGA polyelectrolyte multilayers (PEMs) revealed no cytotoxicity according to ISO 10993-5. Overall, this study demonstrates that Ch can interact electrostatically with γ-PGA forming multilayered films. Furthermore, this study provides a comprehensive characterization of Ch/γ-PGA PEM structures, elucidating the contribution of each layer for the nanostructured films. These model surfaces can be useful substrates to study cell-biomaterial interactions in tissue regeneration.     

Surface modification of poly(L-lactic acid) membrane via layer-by-layer assembly of silver nanoparticle-embedded polyelectrolyte multilayer

The improvement of hydrophilicity, antibacterial activity, hemocompatibility, and cytocompatibility of poly(L-lactic acid) (PLLA) membrane was developed via polyelectrolyte multilayer (PEM) immobilization. Colloidal silver nanoparticles were prepared by using dextran sulfate (DS) as a stabilizer to precede chemical reduction by dextrose. The polysaccharide PEMs, including chitosan (CH) and dextran sulfate (DS)-stabilized silver nanosized colloid (DSS), were successfully deposited on the aminolyzed PLLA membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of PLLA membranes decreased with PEMs grafting layers and reached a steady value after four bilayers of coating, hence suggesting that full coverage was achieved. The PLLA-PEM membranes with DSS as the outermost layer could resist platelet adhesion and human plasma fibrinogen (HPF) adsorption, while prolonging the blood coagulation time. The PLLA-PEM membranes could possess antibacterial activity against Methicilin-resistant Staphylococus aureus (MRSA). In addition, the proliferation and viability of human endothelial cells (ECs) on PLLA-PEM membranes could be significantly improved. Overall results demonstrated that such a fast, easy processing and shape-independent method for an antithrombogenic coating can be used for applications in hemodialysis devices.     

Poliovirus adsorption by 34 minerals and soils

The adsorption of radiolabeled infectious poliovirus type 2 by 34 well-defined soils and mineral substrates was analyzed in a synthetic freshwater medium containing 1 mM CaCl(2) and 1.25 mM NaHCO(3) at pH 7. In a model system, adsorption of poliovirus by Ottawa sand was rapid and reached equilibrium within 1 h at 4 degrees C. Near saturation, the adsorption could be described by the Langmuir equation; the apparent surface saturation was 2.5 x 10(6) plaque-forming units of poliovirus per mg of Ottawa sand. At low surface coverage, adsorption was described by the Freundlich equation. The soils and minerals used ranged from acidic to basic and from high in organic content to organic free. The available negative surface charge on each substrate was measured by the adsorption of a cationic polyelectrolyte, polydiallyldimethylammonium chloride. Most of the substrates adsorbed more than 95% of the virus. In general, soils, in comparison with minerals, were weak adsorbents. Among the soils, muck and Genesee silt loam were the poorest adsorbents; among the minerals, montmorillonite, glauconite, and bituminous shale were the least effective. The most effective adsorbents were magnetite sand and hematite, which are predominantly oxides of iron. Correlation coefficients for substrate properties and virus adsorption revealed that the elemental composition of the adsorbents had little effect on poliovirus uptake. Substrate surface area and pH, by themselves, were not significantly correlated with poliovirus uptake. A strong negative correlation was found between poliovirus adsorption and both the contents of organic matter and the available negative surface charge on the substrates as determined by their capacities for adsorbing the cationic polyelectrolyte, polydiallyldimethylammonium chloride.     

Poliovirus Adsorption by 34 Minerals and Soils

The adsorption of radiolabeled infectious poliovirus type 2 by 34 well-defined soils and mineral substrates was analyzed in a synthetic freshwater medium containing 1 mM CaCl₂ and 1.25 mM NaHCO₃ at pH 7. In a model system, adsorption of poliovirus by Ottawa sand was rapid and reached equilibrium within 1 h at 4°C. Near saturation, the adsorption could be described by the Langmuir equation; the apparent surface saturation was 2.5 × 10⁶ plaque-forming units of poliovirus per mg of Ottawa sand. At low surface coverage, adsorption was described by the Freundlich equation. The soils and minerals used ranged from acidic to basic and from high in organic content to organic free. The available negative surface charge on each substrate was measured by the adsorption of a cationic polyelectrolyte, polydiallyldimethylammonium chloride. Most of the substrates adsorbed more than 95% of the virus. In general, soils, in comparison with minerals, were weak adsorbents. Among the soils, muck and Genesee silt loam were the poorest adsorbents; among the minerals, montmorillonite, glauconite, and bituminous shale were the least effective. The most effective adsorbents were magnetite sand and hematite, which are predominantly oxides of iron. Correlation coefficients for substrate properties and virus adsorption revealed that the elemental composition of the adsorbents had little effect on poliovirus uptake. Substrate surface area and pH, by themselves, were not significantly correlated with poliovirus uptake. A strong negative correlation was found between poliovirus adsorption and both the contents of organic matter and the available negative surface charge on the substrates as determined by their capacities for adsorbing the cationic polyelectrolyte, polydiallyldimethylammonium chloride.     

Adsorption of reovirus by minerals and soils.

Adsorption of [35S]methionine-labeled reovirus by 30 dry soils, minerals, and finely ground rocks suspended in synthetic freshwater at pH 7 was investigated to determine the conditions necessary for optimum virus removal during land application of wastewaters. All of the minerals and soils studied were excellent adsorbents of reovirus, with greater than 99% of the virus adsorbed after 1 h at 4 degrees C. Thereafter, virus remaining in suspension was significantly inactivated, and within 24 h a three to five log10 reduction in titer occurred. The presence of divalent cations, i.e., Ca2+ and Mg2+, in synthetic freshwater enhanced removal, whereas soluble organic matter decreased the amount of virus adsorbed in secondary effluent. The amount of virus adsorbed by these substrates was inversely correlated with the amount of organic matter, capacity to adsorb cationic polyelectrolyte, and electrophoretic mobility. Adsorption increased with increasing available surface area, as suspended infectivity was reduced further by the more finely divided substrates. However, the organic content of the soils reduced the level of infectious virus adsorbed below that expected from surface area measurements alone. The inverse correlation between virus adsorption and substrate capacity for cationic polyelectrolyte indicates that the adsorption of infectious reovirus particles is predominately a charged colloidal particle-charged surface interaction. Thus, adsorption of polyelectrolyte may be useful in predicting the fate of viruses during land application of sewage effluents and sludges.     

Polyelectrolyte-mediated adsorption of amelogenin monomers and nanospheres forming mono- or multilayers

We have applied optical waveguide lightmode spectroscopy combined with streaming potential measurements and Fourier-transformed infrared spectroscopy to investigate adsorption of amelogenin nanospheres onto polyelectrolytes. The long-term objective was to better understand the chemical nature of these assemblies and to gain further insight into the molecular mechanisms involved during self-assembly. It was found that monolayers of monomers and negatively charged nanospheres of a recombinant amelogenin (rM179) irreversibly adsorbed onto a positively charged polyelectrolyte multilayer films. On the basis of measurements performed at different temperatures, it was demonstrated that intermolecular interactions for the formation of nanospheres were not affected by their adsorption onto polyelectrolytes. Consecutive adsorption of nanospheres resulting in the formation of multilayer structures was possible by using cationic poly(l-lysine) as mediators. N-Acetyl-d-glucosamine (GlcNac) did not disturb the nanosphere-assembled protein's structure, and it only affected the adsorption of monomeric amelogenin. Infrared spectroscopy of adsorbed amelogenin revealed conformational differences between the monomeric and assembled forms of rM179. While there was a considerable amount of alpha-helices in the monomers, beta-turn and beta-sheet structures dominated the assembled proteins. Our work constitutes the first report on a structurally controlled in vitro buildup of an rM179 nanosphere monolayer-based matrix. Our data support the notion that amelogenin self-assembly is mostly driven by hydrophobic interactions and that amelogenin/PEM interactions are dominated by electrostatic forces. We suggest that similar forces can govern amelogenin interactions with non-amelogenins or the mineral phase during enamel biomineralization.     

Cationic starch nanoparticles based on polyelectrolyte complexes

Cationic starch nanoparticles were obtained by aqueous polyelectrolyte complex formation between cationic quaternary ammonium substituted starches and anionic sodium tripolyphosphate. The formation of nanosized starch particles of spherical shape was verified by dynamic light scattering and scanning electron microscopy measurements. The cationic starch nanoparticles of different constitution and containing various contents of free quaternary ammonium groups were produced and their zeta potential was modulated between +4 mV and +34 mV by varying polycation/polyanion ratio. Furthermore, the polyelectrolyte complex formation was confirmed by differential scanning calorimetry and FTIR analyses. The thermal stability of cationic starch nanoparticles increased with the introduction of polysalt into polyelectrolyte complex. The solubilization capacity of nanoparticles was varying with the concentration and composition as revealed by fluorescence probe experiments. The capability to accommodate hydrophobic pyrene quest molecule was decreasing with the increasing number of cationic groups in cationic starches and little depended on polyanion/polycation ratio in starch nanoparticles.     

Adsorption of glycinin and β-conglycinin on silica and cellulose: surface interactions as a function of denaturation, pH, and electrolytes

Soybean proteins have found uses in different nonfood applications due to their interesting properties. We report on the kinetics and extent of adsorption on silica and cellulose surfaces of glycinin and β-conglycinin, the main proteins present in soy. Quartz crystal microgravimetry (QCM) experiments indicate that soy protein adsorption is strongly affected by changes in the physicochemical environment. The affinity of glycinin and the mass adsorbed on silica and cellulose increases (by ca. 13 and 89%, respectively) with solution ionic strength (as it increases from 0 to 100 mM NaCl) due to screening of electrostatic interactions. In contrast, β-conglycinin adsorbs on the same substrates to a lower extent and the addition of electrolyte reduces adsorption (by 25 and 57%, respectively). The addition of 10 mM 2-mercaptoethanol, a denaturing agent, reduces the adsorption of both proteins with a significant effect for glycinin. This observation is explained by the cleavage of disulfide bonds which allows unfolding of the molecules and promotes dissociation into subunits that favors more compact adsorbed layer structures. In addition, adsorption of glycinin onto cellulose decreases with lowering the pH from neutral to pH 3 due to dissociation of the macromolecules, resulting in flatter adsorbed layers. The respective adsorption isotherms fit a Langmuir model and QCM shifts in energy dissipation and frequency reveal multiple-step kinetic processes indicative of changes in adlayer structure.     

Mechanisms of polyelectrolyte enhanced surfactant adsorption at the air-water interface

Chitosan, a naturally occurring cationic polyelectrolyte, restores the adsorption of the clinical lung surfactant Survanta to the air-water interface in the presence of albumin at much lower concentrations than uncharged polymers such as polyethylene glycol. This is consistent with the positively charged chitosan forming ion pairs with negative charges on the albumin and lung surfactant particles, reducing the net charge in the double-layer, and decreasing the electrostatic energy barrier to adsorption to the air-water interface. However, chitosan, like other polyelectrolytes, cannot perfectly match the charge distribution on the surfactant, which leads to patches of positive and negative charge at net neutrality. Increasing the chitosan concentration further leads to a reduction in the rate of surfactant adsorption consistent with an over-compensation of the negative charge on the surfactant and albumin surfaces, which creates a new repulsive electrostatic potential between the now cationic surfaces. This charge neutralization followed by charge inversion explains the window of polyelectrolyte concentration that enhances surfactant adsorption; the same physical mechanism is observed in flocculation and re-stabilization of anionic colloids by chitosan and in alternate layer deposition of anionic and cationic polyelectrolytes on charged colloids.     

Ca2+-mediated interaction between dextran sulfate and dimyristoyl-sn-glycero-3-phosphocholine surfaces studied by 2H nuclear magnetic resonance.

The binding of dextran sulfates (DSs) with varying chain lengths to phosphatidylcholine multilamellar vesicles was investigated as a function of polyelectrolyte, NaCl, and Ca2+ concentration. Attractive forces between negatively charged polyelectrolytes and zwitterionic phospholipids arise from the assembly of calcium bridges. The formation of calcium bridges between the sulfate groups on the dextran sulfate and the phosphate group of the lipid results in increased calcium binding in mixtures of DS and 1, 2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). At high NaCl concentration, the plateau adsorption of DS 500 is increased. The strength of dextran sulfate binding to DMPC is reflected in the changes of the 2H NMR quadrupolar splittings of the headgroup methylenes. Association forces increase with the number of calcium bridges formed. Low-molecular-weight DS does not bind to DMPC surfaces whereas longer-chain DSs strongly influence headgroup structure as a result of strong association. DS binding increases with increasing concentration; however, further association of the polyelectrolyte can be promoted only if negative charges are sufficiently screened. DS binding to lipid bilayers is a complicated balance of calcium bridging and charge screening. From our data we postulate that the structure of the adsorbed layer resembles a lattice of DS strands sandwiched between the bilayer lamellae.     

Plasmid DNA adsorption on silica: kinetics and conformational changes in monovalent and divalent salts

A quartz crystal microbalance with dissipation (QCM-D) is used to determine the adsorption rate of a supercoiled plasmid DNA onto a quartz surface and the structure of the resulting adsorbed DNA layer. To better understand the DNA adsorption mechanisms and the adsorbed layer physicochemical properties, the QCM-D data are complemented by dynamic light scattering measurements of diffusion coefficients of the DNA molecules as a function of solution ionic composition. The data from simultaneous monitoring of variations in frequency and dissipation energy with the QCM-D suggest that the adsorbed DNA layer is more rigid in the presence of divalent (calcium) cations compared to monovalent (sodium) cations. Adsorption rates are significantly higher in the presence of calcium, attaining a transport-limited rate at about 1 mM Ca2+. Results further suggest that in low ionic strength solutions containing 1 mM Ca2+ and in moderately high ionic strength solutions containing 300 mM NaCl, plasmid DNA adsorption to negatively charged mineral surfaces is irreversible.     

Protein adsorption onto auto-assembled polyelectrolyte films

Surface modification by deposition of ordered protein systems constitutes one of the major objectives of bio-related chemistry and biotechnology. In this respect a concept has recently been reported aimed at fabricating multilayers by the consecutive adsorption of positively and negatively charged polyelectrolytes. We investigate the adsorption processes between polyelectrolyte multilayers and a series of positively and negatively charged proteins. The film buildup and adsorption experiments were followed by Scanning Angle Reflectometry (SAR). We find that proteins strongly interact with the polyelectrolyte film whatever the sign of the charge of both the multilayer and the protein. When charges of the multilayer and the protein are similar, one usually observes the formation of protein monolayers, which can become dense. We also show that when the protein and the multilayer become oppositely charged, the adsorbed amounts are usually larger and the formation of thick protein layers extending up to several times the largest dimension of the protein can be observed. Our results confirm that electrostatic interactions dominate protein/polyelectrolyte multilayer interactions.     

Complex catalytic colloids on the basis of firefly luciferase as optical nanosensor platform

In the present work the layer-by-layer nano-assembly technique was used for the development of complex catalytic microparticles on the basis of firefly luciferase (FL). FL films containing 1, 2, or 3 monolayers were assembled on silver electrode QCM-resonators and on 520-nm diameter sulfonated polystyrene latex by alternate adsorption of FL and polycations using electrostatic interactions for the interlayer interaction. The assembly process was studied with quartz crystal microbalance, UV-vis spectroscopy, and microelectrophoresis (surface potential). Structural studies of the resulting multilayers confirmed stepwise deposition of FL and cationic poly(dimethyldiallyl ammonium chloride) with a bilayer thickness of 14 nm; a systematic shift of the surface potential from +28 mV for poly(dimethyldiallyl ammonium chloride) to -14 mV for luciferase outermost layer was established. The functionality and stability of the biocolloids were demonstrated by monitoring the intensity of the light emission. Factors influencing the light emitted upon catalytic activity of FL such as the number of luciferase layers in the film and polyion layer at the outermost layer were studied.     

Cell interactions with polyelectrolyte multilayer films

The short-term interactions of chondrosarcoma cells with polyelectrolyte multilayer films built up by the alternate adsorption of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) was studied in the presence and in the absence of serum. The films and their interaction with serum proteins were first characterized by means of optical waveguide lightmode spectroscopy, quartz crystal microbalance, and zeta potential measurements. In a serum-containing medium, the detachment forces measured by the micropipet technique were about eight times smaller on PGA-ending than on PLL-ending films. For these latter ones, the adhesion force decreased when the film thickness increased. In a serum-free medium, the differences between the negative- and positive-ending films were enhanced: adhesion forces on PLL-ending films were 40-100% higher, whereas no cellular adherence was found on PGA-terminating films. PGA-ending films were found to prevent the adsorption of serum proteins, whereas important protein adsorption was always observed on PLL-ending films. These results show how cell interactions with polyelectrolyte films can be tuned by the type of the outermost layer, the presence of proteins, and the number of layers in the film.     

Xanthan/chitosan gold chip for metal enhanced protein biomarker detection

Protein microarrays for disease diagnostics are required to accurately quantify analytes in the low pg/mL range. This task is hampered by weak signal strengths and too low detector sensitivity. Herein we present reflective gold chips coated with polyelectrolyte multilayers (PEMs) for signal enhancement in immunoassays for melanoma-relevant biomarkers. Among tested (semi)natural polysaccharides (xanthan, chitosan, carboxymethylcellulose, hyaluronic acid) PEMs composed of xanthan and chitosan performed best in terms of detection of low analyte concentrations (ED10), spot morphology, fluorescence background and variability (<10%). Fluorescence signals on gold slides with a 75 nm coating of seven crosslinked polyelectrolyte double layers were up to 50 times higher than on bare glass slides. In comparison to commercial substrates the signal to noise ratio is enhanced by up to factor 11. Furthermore sandwich assays for interleukins 6, 8, 10, tumour necrosis factor alpha (TNFα), vascular endothelial growth factor A (VEGF-A) and S100B show working ranges which cover significantly lower concentrations (up to 38-fold). Not limited to above assays the presented substrates, which combine a biocompatible interface with metal-based signal amplification, are a valuable tool in a variety of biosensor applications.