Site-directed mutagenesis with Escherichia coli DNA polymerase III holoenzyme

Escherichia coli DNA polymerase III holoenzyme was used to synthesize double-stranded DNA from M13 single-stranded DNA hybridized to a phosphorylated synthetic oligodeoxynucleotide containing a nucleotide substitution. The resulting DNA was transfected into E. coli JM101 without further treatment. Sequence analysis of randomly chosen phage clones revealed that the efficiency of mutagenesis was nearly 50%, which is the theoretical maximum. Treatment with DNA ligase after DNA synthesis was not necessary to obtain high efficiency of mutagenesis. Thus, use of DNA polymerase III holoenzyme provides a simple and efficient procedure for site-directed mutagenesis.     

Complete replication of templates by Escherichia coli DNA polymerase III holoenzyme

DNA polymerase III holoenzyme (holoenzyme) processively and rapidly replicates a primed single-stranded DNA circle to produce a duplex with an interruption in the synthetic strand. The precise nature of this discontinuity in the replicative form (RF II) and the influence of the 5' termini of the DNA and RNA primers were analyzed in this study. Virtually all (90%) of the RF II products primed by DNA were nicked structures sealable by Escherichia coli DNA ligase; in 10% of the products, replication proceeded one nucleotide beyond the 5' DNA terminus displacing (but not removing) the 5' terminal nucleotide. With RNA primers, replication generally went beyond the available single-stranded template. The 5' RNA terminus was displaced by 1-5 nucleotides in 85% of the products; a minority of products was nicked (9%) or had short gaps (6%). Termination of synthesis on a linear DNA template was usually (85%) one base shy of completion. Thus, replication by holoenzyme utilizes all, or nearly all, of the available template and shows no significant 5'----3' exonuclease action as observed in primer removal by the "nick-translation" activity of DNA polymerase I.     

Dynamics of termination during in vitro replication of ultraviolet-irradiated DNA with DNA polymerase III holoenzyme of Escherichia coli

During in vitro replication of UV-irradiated single-stranded DNA with Escherichia coli DNA polymerase III holoenzyme termination frequently occurs at pyrimidine photodimers. The termination stage is dynamic and characterized by at least three different events: repeated dissociation-reinitiation cycles of the polymerase at the blocked termini; extensive hydrolysis of ATP to ADP and inorganic phosphate; turnover of dNTPs into dNMP. The reinitiation events are nonproductive and are not followed by further elongation. The turnover of dNTPs into dNMPs is likely to result from repeated cycles of insertion of dNMP residues opposite the blocking lesions followed by their excision by the 3'----5' exonucleolytic activity of the polymerase. Although all dNTPs are turned over, there is a preference for dATP, indicating that DNA polymerase III holoenzyme has a preference for inserting a dAMP residue opposite blocking pyrimidine photodimers. We suggest that the inability of the polymerase to bypass photodimers during termination is due to the formation of defective initiation-like complexes with reduced stability at the blocked termini.     

RecA protein inhibits in vitro replication of single-stranded DNA with DNA polymerase III holoenzyme of Escherichia coli

Purified RecA protein from Escherichia coli inhibited 5-10-fold the rate of in vitro replication of both unirradiated and UV-irradiated single-stranded DNA (ssDNA) with DNA polymerase III holoenzyme. Maximal inhibition occurred at a ratio of 1 molecule of RecA per 2-4 nucleotides of DNA, and it affected primarily the initiation of elongation on primed ssDNA. Adding single-strand DNA-binding protein (SSB) caused a relief of inhibition. Under conditions when there was enough SSB to cover the ssDNA completely, RecA protein had no effect on initiation, elongation or dissociation steps of replication. These observations together with data from in vivo studies suggest a role for RecA protein in the arrest of DNA replication observed in cells exposed to UV-radiation and a variety of chemical carcinogens.     

Escherichia coli DNA polymerase II is stimulated by DNA polymerase III holoenzyme auxiliary subunits

DNA polymerase III of Escherichia coli requires multiple auxiliary factors to enable it to serve as a replicative complex. We demonstrate that auxiliary components of the DNA polymerase III holoenzyme, the gamma delta complex and beta subunit, markedly stimulate DNA polymerase II on long single-stranded templates. DNA polymerase II activity is enhanced by single-stranded DNA binding protein, but the stimulation by gamma delta and beta can be observed either in the absence or presence of single-stranded DNA binding protein. In contrast with DNA polymerase III, the requirement of DNA polymerase II for gamma delta cannot be bypassed by large excesses of the beta subunit at low ionic strength in the absence of the single-stranded DNA binding protein. The product of the DNA polymerase II-gamma delta-beta reaction on a uniquely primed single-stranded circle is of full template length; the reconstituted enzyme apparently is incapable of strand displacement synthesis. The possible biological implications of these observations are discussed.     

Overproduction of the beta subunit of DNA polymerase III holoenzyme reduces UV mutagenesis in Escherichia coli.

Overproduction of the beta subunit of DNA polymerase III holoenzyme caused a 5- to 10-fold reduction of UV mutagenesis along with a slight increase in sensitivity to UV light in Escherichia coli. The same effects were observed in excision-deficient cells, excluding the possibility that they were mediated via changes in excision repair. In contrast, overproduction of the alpha subunit of the polymerase did not influence either UV mutagenesis or UV sensitivity. The presence of the mutagenesis proteins MucA and MucB expressed from a plasmid alleviated the effect of overproduced beta on UV mutagenesis. We have previously suggested that DNA polymerase III holoenzyme can exist in two forms: beta-rich form unable to bypass UV lesions and a beta-poor form capable of bypassing UV lesions (O. Shavitt and Z. Livneh, J. Biol. Chem. 264:11275-11281, 1989). The beta-poor form may be related to an SOS form of DNA polymerase III designed to perform translesion polymerization under SOS conditions and thereby generate mutations. On the basis of this model, we propose that the overproduced beta subunit affects the relative abundance of the regular replicative beta-rich polymerase and the SOS bypass-proficient polymerase by sequestering the polymerase molecules to the beta-rich form and blocking the SOS form.     

Dynamics of DNA polymerase III holoenzyme of Escherichia coli in replication of a multiprimed template

Movements of DNA polymerase III holoenzyme (holoenzyme) in replicating a template multiprimed with synthetic pentadecadeoxynucleotides (15-mers) annealed at known positions on a single-stranded circular or linear DNA have been analyzed. After extension of one 15-mer on a multiprimed template, holoenzyme moves downstream in the direction of chain elongation to the next primer. Holoenzyme readily traverses a duplex, even 400 base pairs long, to exploit its 3'-hydroxyl end as the next available primer. This downstream polarity likely results from an inability to diffuse upstream along single-stranded DNA. These holoenzyme movements, unlike formation of the initial complex with a primer, do not require ATP. Time elapsed between completion of a chain and initiation on the next downstream primer is rapid (1 s or less); dissociation of holoenzyme to form a complex with another primed template is slow (1-2 min). Thus, holoenzyme diffuses rapidly only on duplex DNA, probably in both directions, and forms an initiation complex with the first primer encountered. Based on these findings, schemes can be considered for holoenzyme action at the replication fork of a duplex chromosome.     

Mechanism of beta clamp opening by the delta subunit of Escherichia coli DNA polymerase III holoenzyme

The beta sliding clamp encircles the primer-template and tethers DNA polymerase III holoenzyme to DNA for processive replication of the Escherichia coli genome. The clamp is formed via hydrophobic and ionic interactions between two semicircular beta monomers. This report demonstrates that the beta dimer is a stable closed ring and is not monomerized when the gamma complex clamp loader (gamma(3)delta(1)delta(1)chi(1)psi(1)) assembles the beta ring around DNA. delta is the subunit of the gamma complex that binds beta and opens the ring; it also does not appear to monomerize beta. Point mutations were introduced at the beta dimer interface to test its structural integrity and gain insight into its interaction with delta. Mutation of two residues at the dimer interface of beta, I272A/L273A, yields a stable beta monomer. We find that delta binds the beta monomer mutant at least 50-fold tighter than the beta dimer. These findings suggest that when delta interacts with the beta clamp, it binds one beta subunit with high affinity and utilizes some of that binding energy to perform work on the dimeric clamp, probably cracking one dimer interface open.     

Prereplicative complexes of components of DNA polymerase III holoenzyme of Escherichia coli.

Stepwise reconstitution of the subunits of DNA polymerase III holoenzyme of Escherichia coli offers insights into the organization and function of this multisubunit assembly. A highly processive, holoenzyme-like activity can be generated when the gamma complex, in the presence of ATP and a primed template, activates the beta subunit to form a preinitiation complex, and this is then followed by addition of the core polymerase. Further analysis of early replicative complexes has now revealed: 1) that the gamma complex can stably bind a single-stranded DNA binding protein (SSB)-coated template, 2) that neither SSB coating of the template nor a proper primer terminus is required to form the preinitiation complex, and 3) that the gamma complex stabilizes the preinitiation complex in the presence of ATP and destabilizes it in the presence of adenosine 5'-O-(thiotriphosphate). Based on these findings, a sequence of stages can be formulated for an activation of the beta subunit that enables it to bind the template-primer and thereby interact with the core to create a processive polymerase.     

Strand asymmetry of +1 frameshift mutagenesis at a homopolymeric run by DNA polymerase III holoenzyme of Escherichia coli

We have recently shown that single-base frameshifts were predominant among mutations induced within the rpsL target sequence upon oriC plasmid DNA replication in vitro. We found that the occurrence of +1 frameshifts at a run of 6 residues of dA/dT could be increased proportionally by increasing the concentration of dATP present in the in vitro replication. Using single-stranded circular DNA containing either the coding sequence of the rpsL gene or its complementary sequence, the +1 frameshift mutagenesis by DNA polymerase III holoenzyme of Escherichia coli was extensively examined. A(6) --> A(7) frameshifts occurred 30 to 90 times more frequently during DNA synthesis with the noncoding sequence (dT tract) template than with the coding sequence (dA tract). Excess dATP enhanced the occurrence of +1 frameshifts during DNA synthesis with the dT tract template, but no other dNTPs showed such an effect. In the presence of 0.1 mM dATP, the A(6) --> A(7) mutagenesis with the dT tract template was not inhibited by 1.5 mM dCTP, which is complementary to the residue immediately upstream of the dT tract. These results strongly suggested that the A(6) --> A(7) frameshift mutagenesis possesses an asymmetric strand nature and that slippage errors leading to the +1 frameshift are made during chain elongation within the tract rather than by misincorporation of nucleotides opposite residues next to the tract.     

Mutagenic DNA repair in Escherichia coli. XIII. Proofreading exonuclease of DNA polymerase III holoenzyme is not operational during UV mutagenesis

We have introduced a mutD5 mutation (which results in defective 3'-5'-exonuclease activity of the epsilon proofreading subunit of DNA polymerase III holoenzyme) into excision-defective Escherichia coli strains with varying SOS responses to UV light. MutD5 increased the spontaneous mutation frequency in all strains tested, including recA430, umuC122::Tn5, and umuC36 derivatives. It had no effect on UV mutability or immutability in any strain or on misincorporation revealed by delayed photoreversal in UV-irradiated umuC36, umuC122::Tn5, or recA430 bacteria. It is concluded that the epsilon proofreading subunit of DNA polymerase III holoenzyme is excluded, inhibited, or inoperative during misincorporation and mutagenesis after UV.     

DNA polymerase III holoenzyme of Escherichia coli. Purification and resolution into subunits.

DNA polymerase III holoenzyme has been purified from Escherichia coli HMS-83, using, as an assay, the conversion of coliphage G4 single-stranded DNA to the duplex replicative form. The holoenzyme consists of at least four different subunits: alpha, beta, gamma, and delta of 140,000, 40,000, 52,000, and 32,000 daltons, respectively. The alpha subunit is DNA polymerase III, the dnaE gene product. The holoenzyme has been resolved by phosphocellulose chromatography into an alpha - gamma - delta complex and a subunit beta (copolymerase III*); neither possesses detectable activity in the G4 system but together reconstitute holoenzyme-like activity. The alpha - gamma - delta complex has been further resolved to yield a gamma - delta complex which reconstitutes alpha - gamma - delta activity when added to DNA polymerase III. The gamma - delta complex contains a product of the dnaZ gene and has been purified from a strain which contains a ColE1-dnaZ hybrid plasmid.     

Mutagenic DNA repair in Escherichia coli XIII Proofreading exonuclease of DNA polymerase III holoenzyme is not operational during UV mutagenesis

We have introduced a mutD5 mutation (which results in defective 3′–5′-exonuclease activity of the ϵ proofreading subunit of DNA polymerase III holoenzyme) into excision-defective Escherichia coli strains with varying SOS responses to UV light. MutD5 increased the spontaneous mutation frequency in all strains tested, including recA430, umuC122::Tn5, and umuC36 derivatives. It had no effect of UV mutability or immutability in any strain or on misincorporation revealed by delayed photoreversal in UV-irradiated umuC36, umuC122::Tn5, or recA430 bacteria. It is concluded that the ϵ proofreading subunit of DNA polymerase III holoenzyme is excluded, inhibited, or inoperative during misincorporation and mutagenesis after UV.     

DNA polymerase III holoenzyme of Escherichia coli. III. Distinctive processive polymerases reconstituted from purified subunits

The 10 distinctive polypeptides of DNA polymerase III holoenzyme, purified as individual subunits or complexes, could be reconstituted to generate a polymerase with the high catalytic rate of the isolated intact holoenzyme. Functions and interactions of the subunits can be inferred from partial assemblies of the pol III core (alpha, epsilon, and theta subunits) with auxiliary subunits. The core possesses the polymerase and proofreading activities; the auxiliary subunits provide the core with processivity, the capacity to replicate long stretches of DNA without dissociating from the template. In a sequence of reconstruction steps, the beta subunit binds the primed template in an ATP-dependent manner through the catalytic action of a complex made up of the gamma, delta, delta', chi, and psi polypeptides. With the beta subunit in place, a processive polymerase is produced upon addition of the core. When the tau subunit is lacking, binding of polymerase to the primed template is less efficient and stable. The tau-less reconstituted polymerase is more prone to dissociation upon encountering secondary structures in the template in its path, such as a hairpin region in the single strand or a duplex region formed by a strand annealed to the template. With the tau subunit present, the interaction of the core.beta complex (the basic unit of a processive polymerase) with the primed template is strengthened. The tau-containing reconstituted polymerase can replicate DNA continuously through secondary structures in the template. The two distinctive kinds of processivity demonstrated by the tau-less and tau-containing reconstituted polymerases fit nicely into a scheme in which, organized as an asymmetric dimeric holoenzyme, the tau half is responsible for continuous synthesis of one strand, and the less stable half for discontinuous synthesis of the other.     

Analysis of unassisted translesion replication by the DNA polymerase III holoenzyme

DNA damage-induced mutations are formed when damaged nucleotides present in single-stranded DNA are replicated. We have developed a new method for the preparation of gapped plasmids containing site-specific damaged nucleotides, as model DNA substrates for translesion replication. Using these substrates, we show that the DNA polymerase III holoenzyme from Escherichia coli can bypass a synthetic abasic site analogue with high efficiency (30% bypass in 16 min), unassisted by other proteins. The theta and tau subunits of the polymerase were not essential for bypass. No bypass was observed when the enzyme was assayed on a synthetic 60-mer oligonucleotide carrying the same lesion, and bypass on a linear gapped plasmid was 3-4-fold slower than on a circular gapped plasmid. There was no difference in the bypass when standing-start and running-start replication were compared. A comparison of translesion replication by DNA polymerase I, DNA polymerase II, the DNA polymerase III core, and the DNA polymerase III holoenzyme clearly showed that the DNA polymerase III holoenzyme was by far the most effective in performing translesion replication. This was not only due to the high processivity of the pol III holoenzyme, because increasing the processivity of pol II by adding the gamma complex and beta subunit, did not increase bypass. These results support the model that SOS regulation was imposed on a fundamentally constitutive translesion replication reaction to achieve tight control of mutagenesis.     

The beta subunit dissociates readily from the Escherichia coli DNA polymerase III holoenzyme

Purified DNA polymerase III holoenzyme (holoenzyme) was separated by glycerol gradient sedimentation into the beta subunit and the subassembly that lacks it (pol III). In the presence of ATP, beta subunit dimer dissociated from holoenzyme with a KD of 1 nM; in the absence of ATP, the KD was greater than 5 nM. The beta subunit was known to remain tightly associated in the holoenzyme upon formation of an initiation complex with a primed template and during the course of replication. With separation from the template, holoenzyme dissociated into beta and pol III. Cycling to a new template depended on the reformation of holoenzyme. Holoenzyme was in equilibrium with pol III and the beta subunit in crude enzyme fractions as well as in pure preparations.     

DNA structure requirements for the Escherichia coli gamma complex clamp loader and DNA polymerase III holoenzyme

The Escherichia coli chromosomal replicase, DNA polymerase III holoenzyme, is highly processive during DNA synthesis. Underlying high processivity is a ring-shaped protein, the beta clamp, that encircles DNA and slides along it, thereby tethering the enzyme to the template. The beta clamp is assembled onto DNA by the multiprotein gamma complex clamp loader that opens and closes the beta ring around DNA in an ATP-dependent manner. This study examines the DNA structure required for clamp loading action. We found that the gamma complex assembles beta onto supercoiled DNA (replicative form I), but only at very low ionic strength, where regions of unwound DNA may exist in the duplex. Consistent with this, the gamma complex does not assemble beta onto relaxed closed circular DNA even at low ionic strength. Hence, a 3'-end is not required for clamp loading, but a single-stranded DNA (ssDNA)/double-stranded DNA (dsDNA) junction can be utilized as a substrate, a result confirmed using synthetic oligonucleotides that form forked ssDNA/dsDNA junctions on M13 ssDNA. On a flush primed template, the gamma complex exhibits polarity; it acts specifically at the 3'-ssDNA/dsDNA junction to assemble beta onto the DNA. The gamma complex can assemble beta onto a primed site as short as 10 nucleotides, corresponding to the width of the beta ring. However, a protein block placed closer than 14 base pairs (bp) upstream from the primer 3' terminus prevents the clamp loading reaction, indicating that the gamma complex and its associated beta clamp interact with approximately 14-16 bp at a ssDNA/dsDNA junction during the clamp loading operation. A protein block positioned closer than 20-22 bp from the 3' terminus prevents use of the clamp by the polymerase in chain elongation, indicating that the polymerase has an even greater spatial requirement than the gamma complex on the duplex portion of the primed site for function with beta. Interestingly, DNA secondary structure elements placed near the 3' terminus impose similar steric limits on the gamma complex and polymerase action with beta. The possible biological significance of these structural constraints is discussed.     

Isolation and characterization of inhibitory factors of DNA polymerase III holoenzyme from Escherichia coli

Abstract Escherichia coli penicillin-binding protein 5 (PBP5) is anchored to the periplasmic face of the inner membrane via a C-terminal amphiphilic α-helix. The results of washing experiments have suggested an electrostatic contribution to the anchoring mechanism which may involve the cationic region of the C-terminal α-helix. Similarities between this anchor domain and some surface active agents, such as melittin, suggest that the cationic region of the PBP5 anchor may require the presence of anionic phospholipids for membrane interaction. Washing experiments performed on membranes of HDL11, an E. coli mutant in which the expression of the major anionic phospholipids is under lac control, found no such requirement. The results are discussed in relation to the hypothesis that the cationic region may interact with other sources of negative charge, possibly arising from a PBP complex.     

Coordinated leading- and lagging-strand synthesis at the Escherichia coli DNA replication fork. IV. Reconstitution of an asymmetric, dimeric DNA polymerase III holoenzyme.

Individually purified subunits have been used to reconstitute the action of the Escherichia coli DNA polymerase III holoenzyme (Pol III HE) at a replication fork formed in the presence of the primosome, the single-stranded DNA binding protein, and a tailed form II DNA template. Complete activity, indistinguishable from that of the intact DNA Pol III HE, could be reproduced with a combination of the DNA polymerase III core (Pol III core), the gamma.delta complex, and the beta subunit. Experiments where the Pol III core in reaction mixtures containing active replication forks was diluted suggested that the lagging-strand Pol III core remained associated continuously with the replication fork through multiple cycles of Okazaki fragment synthesis. Since the lagging-strand Pol III core must dissociate from the 3' end of the completed Okazaki fragment, this suggests that its association with the fork is via protein-protein interactions, lending credence to the idea that it forms a dimeric complex with the leading-strand Pol III core. An asymmetry in the action of the subunits was revealed under conditions (high ionic strength) that were presumably destabilizing to the integrity of the replication fork. Under these conditions, tau acted to stimulate DNA synthesis only when the primase was present (i.e. when lagging-strand DNA synthesis was ongoing). This stimulation was reflected by an inhibition of the formation of small Okazaki fragments, suggesting that, within the context of the model developed to account for the temporal order of steps during a cycle of Okazaki fragment synthesis, the presence of tau accelerated the transit of the lagging-strand Pol III core from the 3' end of the completed Okazaki fragment to the 3' end of the new primer.