A derivative of Tn5 with direct terminal repeats can transpose

The 5.7 kb⁴ transposable kanamycin resistance determinant Tn5 contains 1.5 kb terminal inverted repeats which we here call arms. Tn5's arms contain the genes and sites necessary for Tn5 transposition, and are not homologous to previously described transposable elements. To determine whether one or both arms is a transposable (IS) element, we transposed Tn5 to pBR322 and used restriction endonuclease digestion and ligation in vitro to generate plasmid derivatives designated pTn5-DR1 and pTn5-DR2 in which Tn5's arms were present in direct rather than in inverted orientation. Analysis of transposition products from dimeric forms of the pTn5-DR1 plasmid to phage λ showed that the outside and inside termini of right and of left arms could function in transposition. We conclude that both of Tn5's arms are transposable elements and name them IS50L (left) and IS50R (right). IS50R, which encodes transposase, was used several-fold more frequently than IS50L, which contain an ochre mutant allele of transposase: this implies that Tn5's transposase acts preferentially on the DNA segment which encodes it. Analysis of transpositions of the amp^rkan^r element Tn5-DR2 to the lac operon showed that Tn5-DR2, like Tn5 wild-type, exhibits regional preference without strict site specificity in the choice of insertion sites.     

Function of the InsA gene in the IS1 element of the Tn9' transposon: influence of oligonucleotide inserts in the InsA gene on formation of simple insertions and plasmid cointegrates]

To elucidate the role of the insA reading frame in transposition of the IS1 element of the Tn9' transposon, the derivatives of plasmids pUC19::Tn9' and pUC19::IS1 have been obtained using oligonucleotide inserts of the length equal or exceeding 9 bp and equal to 10 bp. The ability of mutant variants of the Tn9' transposon and the IS1 element to form simple insertions and plasmid cointegrates was studied. To this end, experiments were performed on mobilization of the derivatives of pUC19 containing mutant variants of the IS1 element and Tn9' as well as of the plasmids pUC19::Tn9' by the conjugative plasmid pRP3.1. According to the data obtained, mutations (inserts) in the insA gene have no influence on the frequency of transposition of the IS1 element and Tn9' from the plasmid pUC19 to pRP3.1. At the same time, the frequency of transposition events of mutant variants of Tn9' from the plasmid pRP3.1 to pBR322 is more than 10 times lower in comparison with the wild type transposon. The data obtained are in accordance with the assumption that the insA gene is not essential for transposition. A hypothesis is put forward explaining the role of the insA gene product in the process of bringing together short inverted repeats of the IS1, which are the sites for the transposase to be recognized at first stages of transposition.     

Role of the IS50 R proteins in the promotion and control of Tn5 transposition

IS50R, the inverted repeat sequence of Tn5 which is responsible for supplying functions that promote and control Tn5 transposition, encodes two polypeptides that differ at their N terminus. Frameshift, in-frame deletion, nonsense, and missense mutations within the N terminus of protein 1 (which is not present in protein 2) were isolated and characterized. The properties of these mutations demonstrate that protein 1 is absolutely required for Tn5 transposition. None of these mutations affected the inhibitory activity of IS50, confirming that protein 2 is sufficient to mediate inhibition of Tn5 transposition. The effects on transposition of increasing the amount of protein 2 (the inhibitor) relative to protein 1 (the transposase) were also analyzed. Relatively large amounts of protein 2 were required to see a significant decrease in the transposition frequency of an element. In addition, varying the co-ordinate synthesis of the IS50 R proteins over a 30-fold range had little effect on the transposition frequency. These studies suggest that neither the wild-type synthesis rate of protein 2 relative to protein 1 nor the amount of synthesis of both IS50 R proteins is the only factor responsible for controlling the transposition frequency of a wild-type Tn5 element in Escherichia coli.     

Characterization of in vitro constructed IS30-flanked transposons

In order to facilitate functional studies on the mobile genetic element IS30, a resident of the Escherichia coli chromosome, transposon structures with two copies of IS30 flanking the chloramphenicol-resistance gene cat were constructed in vitro. Transposons containing IS30 as direct repeats (Tn2700 and Tn2702) transpose from multicopy plasmids into the genome of phage P1-15, thus giving rise to special transduction for cat with frequencies between 10(-5) and 10(-8)/plaque-forming unit. In contrast, transposon structures with IS30 in inverted repeat (Tn2701 and Tn2703) showed no detectable (less than 10(-9] transposition activity in vivo. By restriction analysis, two insertion sites of Tn2700 and Tn2702 on the phage P1-15 genome were indistinguishable from those observed earlier with a single copy of the IS30 element. These two insertion sites were used several times independently by Tn2700 and Tn2702. This confirms the non-random target selection by the element and it indicates that transposition of Tn2700 and Tn2702 follows the same rules as that of IS30.     

An insertion sequence unique to Frankia strain ArI5

At the genetic level, understanding of symbiotic nitrogen fixation by Frankia is limited to nif functions that are highly conserved among all organisms. The genetics and biochemistry of nodulation are largely unexplored because of a complete lack of genetic tools. In other bacteria, mobile genetic elements such as insertion sequences (IS) and transposons are commonly used to create mutations and insert new genetic material. We have characterized a 4 kbp segment of DNA from Frankia strain ArI5 that has the hallmarks of a mobile genetic element, inverted repeats flanking a gene encoding a transposase. There are at least six copies of this element in strain ArI5 but none in either strain CcI3 or CpI1. The inverted repeats are 17 nt long and separated by 2156 bp. Within that region are two, overlapping ORFs that each encode a transposase. RT-PCR analysis of RNA from Frankia ArI5 cells conclusively demonstrates the expression of one transposase gene and suggests that both may be transcribed. Numerous attempts to clone the intact IS in E. coli were unsuccessful suggesting that the element may be unstable in this context. A clone containing the complete IS was constructed in E. coli then modified by insertion of the kanamycin (KAN) resistance gene from Tn5. A fragment of DNA including the inverted repeats, transposase genes and KAN gene, was transferred to the suicide vector pJBSD1. The construct, pFRISK, was transformed into E. coli to search for transposition events.     

Genetic organization of transposon Tn10

Transposon Tn10 is 9300 bp in length, with 1400 bp inverted repeats at its ends. The inverted repeats are structurally intact IS-like sequences (Ross et al., 1979). Analysis of deletion mutants and structural variants of Tn10, reported below, shows that the two IS10 segments contain all of the Tn10-encoded genetic determinants, both sites and functions, that are required for transposition. Furthermore, the two repeats (IS10-Right and IS10-Left) are not functionally equivalent: IS10-Right is fully functional and is capable by itself of promoting normal levels of Tn10 transposition; IS10-Left functions only poorly by itself, promoting transposition at a very low level when IS10-Right is inactivated. Complementation analysis shows that IS10-Right encodes at least one function, required for Tn10 transposition, which can act in trans and which works at the ends of the element. Also, all of the sites specifically required for normal Tn10 transposition have been localized to the outermost 70 bp at each end of the element; there is no evidence that specific sites internal to the element play an essential role. Finally, Tn10 modulates its own transposition in such a way that transposition-defective point mutants, unlike deletion mutants, are not complemented by functions provided in trans; and wild-type Tn10, unlike deletion mutants, is not affected by functions provided in trans from a "high hopper" Tn10 element.     

Two Classes of Tn10 Transposase Mutants That Suppress Mutations in the Tn10 Terminal Inverted Repeat

Tn10 transposition requires IS10 transposase and essential sequences at the two ends of the element. Mutations in terminal basepairs 6-13 confer particularly strong transposition defects. We describe here the identification of transposase mutations that suppress the transposition defects of such terminus mutations. These mutations are named ``SEM'''' for suppression of ends mutations. All of the SEM mutations suppress more than a single terminus mutation and thus are not simple alterations of transposase/end recognition specificity. The mutations identified fall into two classes on the basis of genetic tests, location within the protein and nature of the amino acid substitution. Class I mutations, which are somewhat allele specific, appear to define a small structural and functional domain of transposase in which hydrophobic interactions are important at an intermediate stage of the transposition reaction, after an effective interaction between the ends but before transposon excision. Class II mutations, which are more general in their effects, occur at a single residue in a small noncritical amino-terminal proteolytic domain of transposase and exert their affects by altering a charge interaction; these mutations may affect act early in the reaction, before or during establishment of an effective interaction between the ends.     

Use of a Tn5 derivative that creates lacZ translational fusions to obtain a transposition mutant

We constructed a derivative of Tn5, Tn5 ORFlac, that is capable of creating lacZ translational fusions upon transposition. Lac- strains carrying this construct formed red papillae when plated on MacConkey-lactose media. Lac+ cells isolated from independent papillae expressed distinct beta-galactosidase fusion proteins, suggesting that the Lac+ phenotype resulted from transposition. In support of this, analysis of plasmids carrying Tn5 ORFlac prepared from these cells indicated that the Lac+ phenotypes arose as a result of intermolecular rearrangements. Furthermore, a derivative of Tn5 ORFlac that contains an ochre mutation in the transposase gene formed papillae only in a supB strain. Tn5 ORFlac is useful for obtaining mutants that affect Tn5 transposition and for creating lacZ fusions. We used the papillation phenotype to isolate a spontaneous revertant of IS50L that promotes transposition at a 3.6-fold higher rate than IS50R. The mutation altered the amino acid sequence of both transposase and inhibitor.     

Excision and Transposition of Tn5 as an Sos Activity in Escherichia Coli

Excision and transposition of the Tn5 element in Escherichia coli ordinarily appear to occur by recA-independent mechanisms. However, recA(Prtc) genes, which encode RecA proteins that are constitutively activated to the protease state, greatly enhanced excision and transposition; both events appeared to occur concomitantly and without destruction of the donor DNA. The recombinase function of the RecA protein was not required. Transposition was accompanied by partial, and occasionally full, restoration of the functional integrity of the gene vacated by the excised Tn5. The stimulation of transposition was inhibited by an uncleavable LexA protein and was strongly enhanced by an additional role of the RecA(Prtc) protein besides its mediation of LexA cleavage. To account for the enhanced transposition, we suggest that (i) there may be a LexA binding site within the promoter for the IS50 transposase, (ii) activated RecA may cleave the IS50 transposition inhibitor, and (iii) the transposase may be formed by RecA cleavage of a precursor molecule.     

A Product of the Tn5 Transposase Gene Inhibits Transposition

The bacterial transposon Tn5 possesses a regulatory mechanism that allows it to move with higher efficiency when it is first introduced into a cell than after it is established. Tn5 is a composite transposable element containing inverted repeats of two nearly identical elements, IS 50R, which encodes the transposase protein necessary for Tn5 movement, and IS50L which contains an ochre mutant allele of the transposase gene. Data presented here show that Tn5 transposition is inhibited about 50-fold in cells of Escherichia coli which already carry IS 50R in the multicopy plasmid pBR322. If the cells contain a plasmid carrying either IS50L instead of IS50R, or derivatives of IS 50R in which the transposase gene has been mutated, little if any inhibition of Tn5 transposition is found. Although inhibition had previously been hypothesized to require interaction between the products of IS50 L and IS50R, our results show that IS50R alone is sufficient to mediate inhibition and suggest that the inhibitor is a product of the transposase gene itself.     

dnaA, an essential host gene, and Tn5 transposition.

Mutations in dnaA, an essential gene in Escherichia coli, decrease the frequency of transposition of Tn5. An insertion mutation in the dnaA gene does not affect Tn5 gene expression. Therefore, the DnaA protein plays a role either in the transposition reaction itself or in some type of cellular regulation of transposition. Analysis of a mutation in the DnaA box, found at the outside end of IS50, is consistent with a direct interaction of the protein through these bases. IS50 transposition, which utilizes only one end containing a DnaA box, is not affected by dnaA mutations. Overproduction of the DnaA protein does not increase transposition frequencies in wild-type cells, even when the transposase is also overproduced.     

Cis preference of the IS 903 transposase is mediated by a combination of transposase instability and inefficient translation

The transposase protein encoded by the insertion element IS 903 belongs to an unusual class of DNA-binding proteins, termed cis-acting proteins, that act preferentially at their site of synthesis. Previous work had led us to propose that instability of the IS 903 transposase was a major determinant of its cis preference. Here we describe the isolation of two classes of mutations within the transposase gene that increased action in trans. One class specifically increased trans action without increasing the level of transposition when the mutant gene was located in cis to the transposon. In particular, a threonine-to-proline substitution at amino acid 25 (T25P) reduced cis preference about 60-fold. The half-life of this mutant transposase was significantly longer than that of the wild-type transposase, confirming the critical role of protein instability. The second, larger, class of mutations increased the level of transposition both in trans and in cis. The behaviour and location of these mutations were consistent with an increase in gene expression by improving translational initiation. Several of these mutations exerted a disproportionate effect on the action of transposase in trans, implying that translation efficiency may affect more than just the amount of transposase made. Our results indicate that cis preference of the IS 903 transposase is mediated by a combination of transposase instability and inefficient translation initiation.