The alteration of myosin isoform compartmentation in specific mutants of Caenorhabditis elegans

Myosin isoforms A and B are located at the surface of the central and polar regions, respectively, of thick filaments in body muscle cells of Caenorhabditis elegans, whereas paramyosin and a distinct core structure comprise the backbones of these filaments. Thick filaments and related structures were isolated from nematode mutants that have altered thick filament protein compositions. These mutant filaments and their complexes with specific antibodies were studied by electron microscopy to determine the distribution of the two myosins. The compartmentation of the two myosin isoforms in body wall muscle thick filaments depends not only upon the intrinsic properties of the myosins but their interactions with other components such as paramyosin and their relative quantities determined by synthesis.     

STEM Analysis of Caenorhabditis elegans muscle thick filaments: evidence for microdifferentiated substructures

In the thick filaments of body muscle in Caenorhabditis elegans, myosin A and myosin B isoforms and a subpopulation of paramyosin, a homologue of myosin heavy chain rods, are organized about a tubular core. As determined by scanning transmission electron microscopy, the thick filaments show a continuous decrease in mass-per-length (MPL) from their central zones to their polar regions. This is consistent with previously reported morphological studies and suggests that both their content and structural organization are microdifferentiated as a function of position. The cores are composed of a second distinct subpopulation of paramyosin in association with the alpha, beta, and gamma-filagenins. MPL measurements suggest that cores are formed from seven subfilaments containing four strands of paramyosin molecules, rather than the two originally proposed. The periodic locations of the filagenins within different regions and the presence of a central zone where myosin A is located, implies that the cores are also microdifferentiated with respect to molecular content and structure. This differentiation may result from a novel "induced strain" assembly mechanism based upon the interaction of the filagenins, paramyosin and myosin A. The cores may then serve as "differentiated templates" for the assembly of myosin B and paramyosin in the tapering, microdifferentiated polar regions of the thick filaments.     

Axial arrangement of the myosin rod in vertebrate thick filaments: immunoelectron microscopy with a monoclonal antibody to light meromyosin

A monoclonal antibody, MF20, which has been shown previously to bind the myosin heavy chain of vertebrate striated muscle, has been proven to bind the light meromyosin (LMM) fragment by solid phase radioimmune assay with alpha-chymotryptic digests of purified myosin. Epitope mapping by electron microscopy of rotary-shadowed, myosin-antibody complexes has localized the antibody binding site to LMM at a point approximately 92 nm from the C-terminus of the myosin heavy chain. Since this epitope in native thick filaments is accessible to monoclonal antibodies, we used this antibody as a high affinity ligand to analyze the packing of LMM along the backbone of the thick filament. By immunofluorescence microscopy, MF20 was shown to bind along the entire A-band of chicken pectoralis myofibrils, although the epitope accessibility was greater near the ends than at the center of the A-bands. Thin-section, transmission electron microscopy of myofibrils decorated with MF20 revealed 50 regularly spaced, cross-striations in each half A-band, with a repeat distance of approximately 13 nm. These were numbered consecutively, 1-50, from the A-band to the last stripe, approximately 68 nm from the filament tips. These same striations could be visualized by negative staining of native thick filaments labeled with MF20. All 50 striations were of a consecutive, uninterrupted repeat which approximated the 14-15-nm axial translation of cross-bridges. Each half M-region contained five MF20 striations (approximately 13 nm apart) with a distance between stripes 1 and 1', on each half of the bare zone, of approximately 18 nm. This is compatible with a packing model with full, antiparallel overlap of the myosin rods in the bare zone region. Differences in the spacings measured with negatively stained myofilaments and thin-sectioned myofibrils have been shown to arise from specimen shrinkage in the fixed and embedded preparations. These observations provide strong support for Huxley's original proposal for myosin packing in thick filaments of vertebrate muscle (Huxley, H. E., 1963, J. Mol. Biol., 7:281-308) and, for the first time, directly demonstrate that the 14-15-nm axial translation of LMM in the thick filament backbone corresponds to the cross-bridge repeat detected with x-ray diffraction of living muscle.     

Immunochemical analysis of porcine cardiac C-protein

C-protein has been isolated from pig heart and its immunochemical properties studied. It is extracted with myosin, and separated from the myosin on a DEAE-Sephadex column. The amount of C-protein recovered from crude myosin is approx. 3.5%. The molecular weight of C-protein is 150,000. Anti-C-protein serum reacts with crude myosin and purified C-protein but not with purified myosin in immunodiffusion plates. Cardiac C-protein does not react with anti-skeletal white muscle C-protein serum. Immunoblotting experiments show that anti-cardiac C-protein serum reacts with a Mr = 150,000 component in myofibrils or crude myosin. C-protein is located in the A-band, except the M-line region, of the myofibrils. These results indicate that C-protein is an intrinsic component of the thick filaments in pig heart myofibrils.     

Genetic analysis of myosin assembly inCaenorhabditis elegans

The established observations and unresolved questions in the assembly of myosin are outlined in this article. Much of the background information has been obtained in classical experiments using the myosin and thick filaments from vertebrate skeletal muscle. Current research is concerned with problems of myosin assembly and structure in smooth muscle, a broad spectrum of invertebrate muscles, and eukaryotic cells in general. Many of the general questions concerning myosin assembly have been addressed by a combination of genetic, molecular, and structural approaches in the nematode Caenorhabditis elegans. Detailed analysis of multiple myosin isoforms has been a prominent aspect of the nematode work. The molecular cloning and determination of the complete sequences of the genes encoding the four isoforms of myosin heavy chain and of the myosin-associated protein paramyosin have been a major landmark. The sequences have permitted a theoretical analysis of myosin rod structure and the interactions of myosin in thick filaments. The development of specific monoclonal antibodies to the individual myosins has led to the delineation of the different locations of the myosins and to their special roles in thick filament structure and assembly. In nematode body-wall muscles, two isoforms, myosins A and B, are located in different regions of each thick filament. Myosin A is located in the central biopolar zones, whereas myosin B is restricted to the flanking polar regions. This specific localization directly implies differential behavior of the two myosins during assembly. Genetic and structural experiments demonstrate that paramyosin and the levels of expression of the two forms are required for the differential assembly. Additional genetic experiments indicate that several other gene products are involved in the assembly of myosin. Structural studies of mutants have uncovered two new structures. A core structure separate from myosin and paramyosin appears to be an integral part of thick filaments. Multifilament assemblages exhibit multiple nascent thick filament-like structures extending from central paramyosin regions. Dominant mutants of myosin that disrupt thick filament assembly are located in the ATP and actin binding sites of the heavy chain. A model for a cycle of reactions in the assembly of myosin into thick filaments is presented. Specific reactions of the two myosin isoforms, paramyosin, and core proteins with multifilament assemblages as possible intermediates in assembly are proposed.     

The site of paramyosin in insect flight muscle and the presence of an unidentified protein between myosin filaments and Z-line.

The position of paramyosin in insect flight muscle was determined by labelling myofibrils with antibody to paramyosin and examining them by fluorescent and electron microscopy.Antiserum to dung beetle paramyosin had antibodies to another protein as well as to paramyosin. Specific anti-paramyosin bound to the H-zone of Lethocerus myofibrils showing paramyosin was exposed only in that region. Antibodies to the other protein bound at the ends of the A-band.The exposure of antigenic sites in the two regions of the myofibril depended on the extent of contraction in the myofibril: the sites at the end of the A-band were most exposed in rest-length myofibrils and those at the H-zone in shortened ones.Antibody-labelling in stretched bee muscle showed that the protein at the ends of the sarcomere extended from myosin filaments to Z-line.The high resting elasticity of insect flight muscle and hence its capacity for oscillatory contraction may be due to the protein between myosin filaments and Z-line.     

Caenorhabditis elegans UNC-45 is a component of muscle thick filaments and colocalizes with myosin heavy chain B, but not myosin heavy chain A

In the nematode Caenorhabditis elegans, animals mutant in the gene encoding the protein product of the unc-45 gene (UNC-45) have disorganized muscle thick filaments in body wall muscles. Although UNC-45 contains tetratricopeptide repeats (TPR) as well as limited similarity to fungal proteins, no biochemical role has yet been found. UNC-45 reporters are expressed exclusively in muscle cells, and a functional reporter fusion is localized in the body wall muscles in a pattern identical to thick filament A-bands. UNC-45 colocalizes with myosin heavy chain (MHC) B in wild-type worms as well as in temperature-sensitive (ts) unc-45 mutants, but not in a mutant in which MHC B is absent. Surprisingly, UNC-45 localization is also not seen in MHC B mutants, in which the level of MHC A is increased, resulting in near-normal muscle thick filament structure. Thus, filament assembly can be independent of UNC-45. UNC-45 shows a localization pattern identical to and dependent on MHC B and a function that appears to be MHC B-dependent. We propose that UNC-45 is a peripheral component of muscle thick filaments due to its localization with MHC B. The role of UNC-45 in thick filament assembly seems restricted to a cofactor for assembly or stabilization of MHC B.     

Monoclonal antibodies distinguish titins from heart and skeletal muscle

Murine monoclonal antibodies specific for titin have been elicited using a chicken heart muscle residue as antigen. The three antibodies T1, T3, and T4 recognize both bands of the titin doublet in immunoblot analysis on polypeptides from chicken breast muscle. In contrast, on chicken cardiac myofibrils two of the antibodies (T1, T4) react only with the upper band of the doublet indicating immunological differences between heart and skeletal muscle titin. This difference is even more pronounced for rat and mouse. Although all three antibodies react with skeletal muscle titin, T1 and T4 did not detect heart titin, whereas T3 reacts with this titin both in immunofluorescence microscopy and in immunoblots. Immunofluorescence microscopy of myofibrils and frozen tissues from a variety of vertebrates extends these results and shows that the three antibodies recognize different epitopes. All three titin antibodies decorate at the A-I junction of the myofibrils freshly prepared from chicken skeletal muscle and immunoelectron microscopy using native myosin filaments demonstrates that titin is present at the ends of the thick filaments. In chicken heart, however, antibodies T1 and T4 stain within the I-band rather than at the A-I junction. The three antibodies did not react with any of the nonmuscle tissues or permanent cell lines tested and do not decorate smooth muscle. In primary cultures of embryonic chicken skeletal muscle cells titin first appears as longitudinal striations in mononucleated myoblasts and later at the myofibrillar A-I junction of the myotubes.     

Immunocytochemical localization of myosin in rabbit liver cell

It has been established that the liver cell possesses its own myosin which resembles other non-muscle myosins in subunit composition and in its dependence of actin-activated Mg2+-ATPase activity on light chain phosphorylation (Ueno T, Sekine T: Biochem Int, 1987;15:1205). We have raised a specific antibody against rabbit liver cell myosin. Immunoblot analysis has shown that the purified antibody reacts only with the heavy chain of liver cell myosin. The antibody did not react with rabbit skeletal muscle myosin or with smooth muscle myosin extracted from rabbit intestinal wall. Cryostat liver sections analyzed by indirect immunofluorescence microscopy showed a characteristic polygonal staining pattern, indicating that myosin is concentrated close to the plasma membrane, particularly in the region of bile canaliculi. Myosin therefore appears to be localized in the area where actin filaments are also abundant.     

Myosin and paramyosin are organized about a newly identified core structure

Myosin isoforms A and B are differentially localized to the central and polar regions, respectively, of thick filaments in body wall muscle cells of Caenorhabditis elegans (Miller, D. M. III, I. Ortiz, G. C. Berliner, and H. F. Epstein, 1983, Cell, 34:477-490). Biochemical and electron microscope studies of KCl-dissociated filaments show that the myosin isoforms occupy a surface domain, paramyosin constitutes an intermediate domain, and a newly identified core structure exists. The diameters of the thick filaments vary significantly from 33.4 nm centrally to 14.0 nm near the ends. The latter value is comparable to the 15.2 nm diameter of the core structures. The internal density of the filament core appears solid medially and hollow at the poles. The differentiation of thick filament structure into supramolecular domains possessing specific substructures of characteristic stabilities suggests a sequential mode for thick filament assembly. In this model, the two myosin isoforms have distinct roles in assembly. The behavior of the myosins, including nucleation of assembly and determination of filament length, depend upon paramyosin and the core structure as well as their intrinsic molecular properties.     

Distribution of fast myosin heavy chain isoforms in thick filaments of developing chicken pectoral muscle

Colloidal gold-conjugated monoclonal antibodies were prepared to stage-specific fast myosin heavy chain (MHC) isoforms of developing chicken pectoralis major (PM). Native thick filaments from different stages of development were reacted with these antibodies and examined in the electron microscope to determine their myosin isoform composition. Filaments prepared from 12-d embryo, 10-d chick, and 1-yr chicken muscle specifically reacted with the embryonic (EB165), neonatal (2E9), and adult (AB8) antimyosin gold-conjugated monoclonal antibodies, respectively. The myosin isoform composition was more complex in thick filaments from stages of pectoral muscle where more than one isoform was simultaneously expressed. In 19-d embryo muscle where both embryonic and neonatal isoforms were present, three classes of filaments were found. One class of filaments reacted only with the embryonic antibody, a second class reacted only with the neonatal-specific antibody, and a third class of filaments were decorated by both antibodies. Similar results were obtained with filaments prepared from 44-d chicken PM where the neonatal and adult fast MHCs were expressed. These observations demonstrate that two myosin isoforms can exist in an individual thick filament in vivo. Immunoelectron microscopy was also used to determine the specific distribution of different fast MHC isoforms within individual filaments from different stages of development. The anti-embryonic and anti-adult antibodies uniformly decorated both homogeneous and heterogeneous thick filaments. The neonatal specific antibody uniformly decorated homogeneous filaments; however, it preferentially decorated the center of heterogeneous filaments. These observations suggest that neonatal MHC may play a specific role in fibrillogenesis.     

Polarity of myofilaments in molluscan smooth muscle

Summary Myofilaments were isolated by gently homogenizing smooth muscle cells isolated from the pedal retractor muscle (PRM) of Mytilus edulis, and observed by electron microscopy. The thick filaments isolated in the presence of ATP (10–20 mM) had projections of myosin heads except near their centre (central bare zone). After extraction of myosin, the paramyosin core of the thick filaments showed a Bear-Selby net or a striated pattern with a main periodicity of 14.5 nm. Both the Bear-Selby net and the striated patterns had a polarity that reversed at the centre of the filament where the patterns were obscured. The thin filaments were attached to dense bodies. Decoration of the thin filaments with heavy meromyosin showed that they have opposite polarity on opposing sides of the dense body. The results indicate that the thick filaments are bipolar and also that the dense bodies are functionally analogous to the Z-disk of the striated muscle.     

Immunohistochemistry of chaetognath body wall muscles

Abstract. A light and electron immunohistochemical study was carried out on the body wall muscles of the chaetognath Sagitta friderici for the presence of a variety of contractile proteins (myosin, paramyosin, actin), regulatory proteins (tropomyosin, troponin), and structural proteins (α‐actinin, desmin, vimentin). The primary muscle (～80% of body wall volume) showed the characteristic structure of transversely striated muscles, and was comparable to that of insect asynchronous flight muscles. In addition, the body wall had a secondary muscle with a peculiar structure, displaying two sarcomere types (S1 and S2), which alternated along the myofibrils. S1 sarcomeres were similar to those in the slow striated fibers of many invertebrates. In contrast, S2 sarcomeres did not show a regular sarcomeric pattern, but instead exhibited parallel arrays of 2 filament types. The thickest filaments (～10–15 nm) were arranged to form lamellar structures, surrounded by the thinnest filaments (～6 nm). Immunoreactions to desmin and vimentin were negative in both muscle types. The primary muscle exhibited the classical distribution of muscle proteins: actin, tropomyosin, and troponin were detected along the thin filaments, whereas myosin and paramyosin were localized along the thick filaments; immunolabeling of α‐actinin was found at Z‐bands. Immunoreactions in the S1 sarcomeres of the secondary muscle were very similar to those found in the primary muscle. Interestingly, the S2 sarcomeres of this muscle were labeled with actin and tropomyosin antibodies, and presented no immunore‐actions to both myosin and paramyosin. α‐Actinin in the secondary muscle was only detected at the Z‐lines that separate S1 from S2. These findings suggest that S2 are not true sarcomeres. Although they contain actin and tropomyosin in their thinnest filaments, their thickest filaments do not show myosin or paramyosin, as the striated muscle thick myofilaments do. These peculiar S2 thick filaments might be an uncommon type of intermediate filament, which were labeled neither with desmin or vimentin antibodies.     

Isolation and composition of thick filaments from rabbit skeletal muscle

A method has been developed for the isolation of thick filaments from rabbit skeletal muscle. We found that the thick filaments of this muscle are readily dispersed in the presence of a relaxing medium if the M and Z-line structures are first extracted in a low-salt solvent system. Thick filaments were separated from thin filaments by zone sedimentation in a 10% to 30% glycerol density gradient. The isolated filaments are homogeneous in length (1.5 to 1.6 μm) and retain the physical characteristics of these structures observed in sectioned muscle. Gel electrophoresis of thick filaments in the presence of sodium dodecyl sulfate showed a band of C-protein as well as bands with mobilities characteristic of the heavy and light chains of myosin. No other protein species was detected in these experiments. Thus our results provide evidence against the presence of a special protein component which would serve as the core of the skeletal thick filament structure. From the relative stain density of bands, the molar ratio of C-protein to myosin was estimated to be 1 to 5.8.     

Purification of uterine myosin and synthetic filament formation

Rabbit uterine myosin was purified by DEAE-Sephadex column chromatography. The purified myosin was shown to be free from contamination with actin or other impurities by sodium dodecyl sulfate gel electrophoresis. It was also shown to have two light chains with molecular weights of 22,000 and 17,000. The C protein normally found in crude, rabbit skeletal muscle myosin was not found in crude, rabbit uterine myosin.On reducing the ionic strength of a solution of rabbit uterine myosin, the myosin molecules first aggregated to form short, tapered bipolar filaments with bare zones. These were observed in the presence or absence of 10 mm-magnesium. These filaments ranged in length from 0.3 μm to 0.6 μm. On reaching 0.1 m-KCl, and only if 10 mm-magnesium was present, the filaments grew in length by linear overlap of the tapered bipolar filaments and obliteration of the bare zone regions. These filaments ranged in length from 0.7 μm to 1.2 μm.     

Oblique section 3-D reconstruction of relaxed insect flight muscle reveals the cross-bridge lattice in helical registration.

In this work we examined the arrangement of cross-bridges on the surface of myosin filaments in the A-band of Lethocerus flight muscle. Muscle fibers were fixed using the tannic-acid-uranyl-acetate, ("TAURAC") procedure. This new procedure provides remarkably good preservation of native features in relaxed insect flight muscle. We computed 3-D reconstructions from single images of oblique transverse sections. The reconstructions reveal a square profile of the averaged myosin filaments in cross section view, resulting from the symmetrical arrangement of four pairs of myosin heads in each 14.5-nm repeat along the filament. The square profiles form a very regular right-handed helical arrangement along the surface of the myosin filament. Furthermore, TAURAC fixation traps a near complete 38.7 nm labeling of the thin filaments in relaxed muscle marking the left-handed helix of actin targets surrounding the thick filaments. These features observed in an averaged reconstruction encompassing nearly an entire myofibril indicate that the myosin heads, even in relaxed muscle, are in excellent helical register in the A-band.     

Immunohistochemical analysis of C-protein isoforms in cardiac and skeletal muscle of the axolotl,Ambystoma mexicanum

Of the several proteins located within sarcomeric A-bands, C-protein, a myosin binding protein (MyBP) is thought to regulate and stabilize thick filaments during assembly. This paper reports the characterization of C-protein isoforms in juvenile and adult axolotls, Ambystoma mexicanum, by means of immunofluorescent microscopy and Western blot analyses. C-protein and myosin are found specifically within the A-bands, whereas tropomyosin and -actin are detected in the I-bands of axolotl myofibrils. The MF1 antibody prepared against the fast skeletal muscle isoform of chicken C-protein specifically recognizes a cardiac isoform (Axcard1) in juvenile and adult axolotls but does not label axolotl skeletal muscle. The ALD66 antibody, which reacts with the C-protein slow isoform in chicken, localizes only in skeletal muscle of the axolotl. This slow axolotl isoform (Ax_slow) displays a heterogeneous distribution in fibers of dorsalis trunci skeletal muscle. The C₃₁₅ antibody against the chicken C-protein cardiac isoform identifies a second axolotl cardiac isoform (Ax_card2), which is present also in axolotl skeletal muscle. No C-protein was detected in smooth muscle of the juvenile and adult axolotl with these antibodies.This work was supported by NIH grants HL-32184 and HL-37702 and a grant-in-aid from the American Heart Association to L.F.L.     

Structure of the cross-striated adductor muscle of the scallop

The structure of the cross-striated adductor muscle of the scallop has been studied by electron microscopy and X-ray diffraction using living relaxed, glycerol-extracted (rigor), fixed and dried muscles. The thick filaments are arranged in a hexagonal lattice whose size varies with sarcomere length so as to maintain a constant lattice volume. In the overlap region there are approximately 12 thin filaments about each thick filament and these are arranged in a partially disordered lattice similar to that found in other invertebrate muscles, giving a thin-to-thick filament ratio in this region of 6:1.The thin filaments, which contain actin and tropomyosin, are about 1 μm long and the actin subunits are arranged on a helix of pitch 2 × 38.5 nm. The thick filaments, which contain myosin and paramyosin, are about 1.76 μm long and have a backbone diameter of about 21 nm. We propose that these filaments have a core of paramyosin about 6 nm in diameter, around which the myosin molecules pack. In living relaxed muscle, the projecting myosin heads are symmetrically arranged. The data are consistent with a six-stranded helix, each strand having a pitch of 290 nm. The projections along the strands each correspond to the heads of one or two myosin molecules and occur at alternating intervals of 13 and 16 nm. In rigor muscle these projections move away from the backbone and attach to the thin filaments.In both living and dried muscle, alternate planes of thick filaments are staggered longitudinally relative to each other by about 7.2 nm. This gives rise to a body-centred orthorhombic lattice with a unit cell twice the volume of the basic filament lattice.     

Identification of a connecting filament protein in insect fibrillar flight muscle

A major component on sodium dodecyl sulfate-containing gels of solubilized isolated Z-discs, purified from honeybee flight muscle, migrates with an apparent molecular weight of 360,000. Antibodies to this high molecular weight polypeptide have been prepared by injecting rabbits with homogenized gel slices containing the protein band. With indirect immunofluorescence microscopy these antibodies are localized to a region extending from the edge of the Z-band to the A-band in shortened or stretched sarcomeres. Similarly, glycerinated flight muscle treated with antiserum and prepared for electron microscopy shows enhanced density from the ends of the thick filaments to the I-Z junction regardless of sarcomere length. Evidence indicates that antiserum is directed toward a structural protein of connecting filaments, which link thick filaments to the Z-band in insect fibrillar muscle, rather than to a thin filament component. In Ouchterlony double-diffusion experiments a single precipitin band is formed when antiserum is diffused against solubilized Z-discs; no reaction occurs between antiserum and proteins from native thin filaments prepared from honeybee flight muscle. Further, antibody stains the I-band in flight muscle fibrils from which thin filaments are removed. Finally, honeybee leg muscle myofibrils, in which connecting filaments have not been observed, are not labelled with antibody. Since antibody binds to the short projections which extend from the flat surfaces of isolated Z-discs, these projections are assumed to be remnants of connecting filaments and the source of the 360,000 M_r protein.The amino acid composition of this high molecular weight material, purified by Sepharose chromatography, is presented. The protein has been named “projectin”.     

Flexibility of myosin attachment to surfaces influences F-actin motion.

We have analyzed the dependence of actin filament sliding movement on the mode of myosin attachment to surfaces. Monoclonal antibodies (mAbs) that bind to three distinct sites were used to tether myosin to nitrocellulose-coated glass. One antibody reacts with an epitope on the regulatory light chain (LC2) located at the head-rod junction. The other two react with sites in the rod domain, one in the S2 region near the S2-LMM hinge, and the other at the C terminus of the myosin rod. This method of attachment provides a means of controlling the flexibility and density of myosin on the surface. Fast skeletal muscle myosin monomers were bound to the surfaces through the specific interaction with these mAbs, and the sliding movement of fluorescently labeled actin filaments was analyzed by video microscopy. Each of these antibodies produced stable myosin-coated surfaces that supported uniform motion of actin over the course of several hours. Attachment of myosin through the anti-S2 and anti-LMM mAbs yielded significantly higher velocities (10 microns/s at 30 degrees C) than attachment through anti-LC2 (4-5 microns/s at 30 degrees C). For each antibody, we observed a characteristic value of the myosin density for the onset of F-actin motion and a second critical density for velocity saturation. The specific mode of attachment influences the velocity of actin filaments and the characteristic surface density needed to support movement.