Replication of the promiscuous plasmid pLSI: a region encompassing the minus origin of replication is associated with stable plasmid inheritance

Deletion of a region of the promiscuous plasmid pLS1 encompassing the initiation signals for the synthesis of the plasmid lagging strand led to plasmid instability in Streptococcus pneumoniae and Bacillus subtilis. This defect could not be alleviated by increasing the number of copies (measured as double-stranded plasmid DNA) to levels similar to those of the wild-type plasmid pLS1. Our results indicate that in the vicinity of, or associated with the single-stranded origin region of pLS1 there is a plasmid component involved in its stable inheritance. Homology was found between the DNA gyrase binding site within the par region of plasmid pSC101 and the pLS1 specific recombination site RS_R.     

Isolation and characterization of pLS 1 plasmid mutants with increased copy numbers

Abstract Streptococcus pneumoniae genetic systems designed for isolation of plasmid mutants with copy-up phenotypes have been developed. The target plasmids have the pLS1 replicon, and two different strategies have been followed: (i) selection of clones exhibiting augmented resistance to antibiotics, or (ii) obligatory co-existence of incompatible plasmids. We have isolated 23 plasmid mutants exhibiting increased number of copies. All the mutations corresponded to four different alleles of the copG gene of plasmid pLS1. These strategies could be used with other plasmids.     

Structural and genetic analyses of a par locus that regulates plasmid partition in Bacillus subtilis.

The Bacillus plasmid pLS11 partitions faithfully during cell division. Using a partition-deficient plasmid vector, we randomly cloned DNA fragments of plasmid pLS11 and identified the locus that regulates plasmid partition (par) by cis complementation in Bacillus subtilis. The cloned par gene conferred upon the vector plasmid a high degree of segregational stability. The par locus was mapped to a 167-base-pair segment on pLS11, and its nucleotide sequence was determined. The cloned par fragment regulated the partition of several different Bacillus replicons, and it only functioned in cis; it did not contain the replication function nor elevate the plasmid copy number in B. subtilis. The expression of par was orientation specific with respect to the replication origin on the same plasmid. We propose that the pLS11-derived par functions as a single-stranded site that interacts with other components involved in plasmid partition during cell division.     

Initiation signals for the conversion of single stranded to double stranded DNA forms in the streptococcal plasmid pLS1.

We have characterized a region in the streptococcal plasmid pLS1 located between nucleotides 4103 and 4218 which is a signal involved in the conversion of single stranded intermediates of replication to double stranded plasmid forms. This region has a large axis of dyad symmetry resulting in the formation of a secondary structure as revealed by the location of endonuclease S1-cleavage sites in supercoiled covalently closed circular pLS1 DNA. Deletions affecting this region caused a fivefold reduction in plasmid copy number, plasmid instability and the accumulation of single-stranded DNA intermediates. The conversion signal of pLS1 has homologues in other staphylococcal plasmids, sharing a consensus sequence located in the loop of the signal. Computer assisted analysis showed that the signal detected in pLS1 has a high degree of homology with the complementary strand origin of the Escherichia coli single stranded bacteriophages phi X174 and M13.     

Replication control of plasmid pLS1: efficient regulation of plasmid copy number is exerted by the combined action of two plasmid components, CopG and RNA II

Two elements, the products of genes copG and rnall , are involved in the copy-number control of plasmid pLS1. RNA II is synthesized in a dosage-dependent manner. Mutations in both components have been characterized. To determine the regulatory role of the two genes, we have cloned copG , rnall or both elements at various gene dosages into pLS1-compatible plasmids. Assays of incompatibility towards wild-type or mutant pLS1 plasmids showed that: (i) the rnall gene product, rather than the DNA sequence encoding it, is responsible for the incompatibility, and (ii) CopG and RNA II act in trans and are able to correct up fluctuations in pLS1 copy number. A correlation between the gene dosage at which the regulatory elements were supplied and the incompatibility effect on the resident plasmid was observed. The entire copG-rnall circuit has a synergistic effect when compared with any of its components in the correction of pLS1 copy-number fluctuations, indicating that, in the homoplasmid steady-state situation, the control of pLS1 replication is exerted by the co-ordinate action of CopG and RNA II.     

Fitness of the pMV158 replicon in Streptococcus pneumoniae

Promiscuous, rolling-circle replication plasmid pMV158 determines tetracycline resistance to its host and can be mobilized by conjugation. Plasmid pLS1 is a deletion derivative of pMV158 that has lost its conjugative mobilization ability. Both plasmids replicate efficiently and are stably inherited in Streptococcus pneumoniae. We have analyzed the effect of pMV158 and pLS1 carriage on the bacterial growth rate. Whereas the parental plasmid does not significantly modify the cell doubling time, pLS1 slows down the growth of the bacterial host by 8-9%. The bases of the differential burden caused by pMV158 and pLS1 carriage are not yet understood. The negligible cost of the pMV158 parental natural plasmid on the host might explain the prevalence of small, multicopy, rolling-circle replication plasmids, even though they lack any selectable trait.     

In vitro recognition of the replication origin of pLS1 and of plasmids of the pLS1 family by the RepB initiator protein.

Rolling-circle replication of plasmid pLS1 is initiated by the plasmid-encoded RepB protein, which has nicking-closing (site-specific DNA strand transferase) enzymatic activity. The leading-strand origin of pLS1 contains two regions, (i) the RepB-binding site, constituted by three directly repeated sequences (iterons or the bind region), and (ii) the sequence where RepB introduces the nick to initiate replication (the nic region). A series of plasmids, belonging to the pLS1 family, show features similar to those of pLS1 and have DNA sequences homologous to the pLS1 nic region. In addition, they all share homologies at the level of their Rep proteins. However, the bind regions of these plasmids are, in general, not conserved. We tested the substrate specificity of purified RepB of pLS1. The RepB protein has a temperature-dependent nicking-closing action on supercoiled pLS1, as well as on recombinant plasmid DNAs harboring the pLS1 nic region. The DNA strand transferase activity of pLS1-encoded RepB was also assayed on two plasmids of the pLS1 family, namely, pE194 and pFX2. DNAs from both plasmids were relaxed by RepB, provided they had a proper degree of supercoiling; i.e., it was necessary to modulate the supercoiling of pE194 DNA to achieve RepB-mediated DNA relaxation. Single-stranded oligonucleotides containing the nic regions of various plasmids belonging to the pLS1 family, including those of pE194 and pFX2, were substrates for RepB. In vitro, the RepB protein does not need to bind to the iterons for its nicking-closing activity.     

Experimental basis for a stable plasmid, pLS30, to shuttle between Bacillus subtilis species by conjugational transfer

The use of Bacillus subtilis 168 as the initial host for molecular cloning and subsequent delivery of the engineered DNA to other Bacillus hosts appears attractive, and would lead to an efficient DNA manipulation system. However, methods of delivery to other Bacillus species are limited due to their inability to develop natural competence. An alternative, unexplored conjugational transfer method drew our attention and a B. subtilis native plasmid, pLS30, isolated from B. subtilis (natto) strain IAM1168 was characterized for this aim. The nucleotide sequence (6,610 bp) contained the mob gene and its recognition sequence, oriT, that features pLS30 as a mobile plasmid between Bacillus species on conjugational transfer. Plasmid pLS3001, a chimera with a pBR322-based plasmid prepared in Escherichia coli to confer an antibiotic resistance marker, showed apparent mobilizing activity in the pLS20-mediated conjugational transfer system recently established. The rep gene and associated palT1-like sequence common to all other pLS plasmids previously sequenced indicated that pLS30 is a typical rolling circle replicating (RCR) type plasmid. Due to the significant stability of pLS30 in IAM1168, application of a mobile plasmid would allow quick propagation to Bacillus species.     

Bacillus subtilis (natto) plasmid pLS20 mediates interspecies plasmid transfer.

The 55-kilobase plasmid, pLS20, of Bacillus subtilis (natto) 3335 promotes transfer of the tetracycline resistance plasmid pBC16 from B. subtilis (natto) to the Bacillus species B. anthracis, B. cereus, B. licheniformis, B. megaterium, B. pumilus, B. subtilis, and B. thuringiensis. Frequency of pBC16 transfer ranged from 2.3 x 10(-6) to 2.8 x 10(-3). Evidence for a plasmid-encoded conjugationlike mechanism of genetic exchange includes (i) pLS20+ strains, but not pLS20- strains, functioned as donors of pBC16; (ii) plasmid transfer was insensitive to the presence of DNase; and (iii) cell-free filtrates of donor cultures did not convert recipient cells to Tcr. Cotransfer of pLS20 and pBC16 in intraspecies matings and in matings with a restriction-deficient B. subtilis strain indicated that pLS20 was self-transmissible. In addition to mobilizing pBC16, pLS20 mediated transfer of the B. subtilis (natto) plasmid pLS19 and the Staphylococcus aureus plasmid pUB110. The fertility plasmid did not carry a selectable marker. To facilitate direct selection for pLS20 transfer, plasmid derivatives which carried the erythromycin resistance transposon Tn917 were generated. Development of this method of genetic exchange will facilitate the introduction of plasmid DNA into nontransformable species by use of transformable fertile B. subtilis or B. subtilis (natto) strains as intermediates.     

Multiple roles for DNA polymerase I in establishment and replication of the promiscuous plasmid pLS1

The polymerase activity of DNA polymerase I is important for the establishment of the pLS1 replicon by reconstitutive assembly in Streptococcus pneumoniae after uptake of exogenous pLS1 plasmid DNA. In polA mutants lacking the polymerase domain, such establishment was reduced at least 10-fold in frequency. Chromosomally facilitated establishment of pLS1-based plasmids carrying DNA homologous to the host chromosome was not so affected. However, both types of plasmid transfer gave mostly small colonies on initial selection, which was indicative of a defect in replication and filling of the plasmid pool. Once established, the pLS1-based plasmids replicated in polA mutants, but they showed segregational instability. This defect was not observed in strains with the wild-type enzyme or in an S. pneumoniae strain that encodes the polymerase and exonuclease domains of the enzyme on separate fragments. The role of DNA polymerase I in stably maintaining the plasmids depends on its polymerizing function in three separate steps of rolling-circle replication, as indicated by the accumulation of different replication intermediate forms in polA mutants. Furthermore, examination of the segregational stability of the pLS1 replicon in an Escherichia coli mutant system indicated that both the polymerase and the 5′-to-3′ exonuclease activities of DNA polymerase I function in plasmid replication.     

A site-specific recE4-independent intramolecular recombination between Bacillus subtilis and Staphylococcus aureus DNAs in hybrid plasmids

A composite plasmid pLS253 was constructed from pLS103 [carrying the Bacillus subtilis leucine genes on B. subtilis (natto) plasmid pLS28] and pHV14 [a recombinant plasmid composed of pBR322 and the staphylococcal R-plasmid pC194] employing BamHI endonuclease, T4 DNA ligase, and B. subtilis transformation. All the Leu+ Cmr transformants tested harbored not only pLS253 but also two smaller plasmids designated as pLS251 and pLS252. pLS253 DNA, when purified on an agarose gel, retained both Leu+ and Cmr transforming activities; however, in all the Leu+ Cmr transformants, the two smaller plasmids reappeared. pLS251 and pLS252 exhibited Leu+- or Cm4-transforming activity, respectively, and must have been derived from the pLS253 parent by an intramolecular recombination event, since the sum of the pLS251 and pLS252 DNAs represent the entire pLS253 genome. The recombination occurred between specific sites on the B. subtilis (natto) and Staphylococcus aureus plasmids. When the composite plasmid, pLS254, was constructed by BamHI cleavage of pLS251 and pLS252 followed by ligation, Leu+ Cmr transformants segregated two smaller plasmids which were indistinguishable from the original plasmids pLS103 and pHV14, respectively. They must have been derived from pLS254 through a reversal of the original recombination event. No intermolecular recombination between pLS251 and pLS252 DNA was detected. The recombination process was independent of recE function of the host cells, and its mechanism is discussed.     

Physical structure and genetic expression of the sulfonamide-resistance plasmid pLS80 and its derivatives in Streptococcus pneumoniae and Bacillus subtilis

The 10-kb chromosomal fragment of Streptococcus pneumoniae cloned in pLS80 contains the sul-d allele of the pneumococcal gene for dihydropteroate synthase. As a single copy in the chromosome this allele confers resistance to sulfanilamide at 0.2 mg/ml; in the multicopy plasmid it confers resistance to 2.0 mg/ml. The sul-d mutation was mapped by restriction analysis to a 0.4-kb region. By the mechanism of chromosomal facilitation, in which the chromosome restores information to an entering plasmid fragment, a BamHI fragment missing the sul-d region of pLS80 established the full-sized plasmid, but with the sul-s allele of the recipient chromosome. A spontaneous deletion beginning approximately 1.5 kb to the right of the sul-d mutation prevented gene function, possibly by removing a promoter. This region could be restored by chromosomal facilitation and be demonstrated in the plasmid by selection for sulfonamide resistance. Under selection for a vector marker, tetracycline resistance, only the deleted plasmid was detectable, apparently as a result of plasmid segregation and the advantageous growth rates of cells with smaller plasmids. When such cells were selected for sulfonamide resistance, the deleted region returned to the plasmid, presumably by equilibration between the chromosome and the plasmid pool, to give a low frequency (approximately 10(-3) of cells resistant to sulfanilamide at 2.0 mg/ml. Models for the mechanisms of chromosomal facilitation and equilibration are proposed. Several derivatives of pLS80 could be transferred to Bacillus subtilis, where they conferred resistance to sulfanilamide at 2 mg/ml, thereby demonstrating cross-species expression of the pneumococcal gene.(ABSTRACT TRUNCATED AT 250 WORDS)     

Induced bending of plasmid pLS1 DNA by the plasmid-encoded protein RepA

The broad host range streptococcal plasmid pLS1 encodes for a 5.1-kDa repressor protein, RepA. This protein has affinity for DNA (linear or supercoiled) and is translated from the same mRNA as the replication initiator protein RepB. By gel retardation assays, we observed that RepA shows specificity for binding to the plasmid HinfID fragment, which includes the target of the protein. The target of RepA within the plasmid DNA molecule has been located around the plasmid single site ApaLI. This site is included in a region that contains the promoter for the repA and repB genes and is contiguous to the plasmid ori(+). A complex sequence-directed DNA curvature is observed in this region of pLS1. Upon addition of RepA to plasmid linear DNA or to circularly permuted restriction fragments, this intrinsic curvature was greatly enhanced. Thus, a strong RepA-induced bending could be located in the vicinity of the ApaLI site. Visualization of the bent DNA was achieved by electron microscopy of complexes between RepA and plasmid DNA fragments containing the RepA target.     

recE4-Independent recombination between homologous deoxyribonucleic acid segments of Bacillus subtilis plasmids.

A plasmid (pLS104) carrying a tandem repetition of the leu region of the Bacillus subtilis chromosome arose spontaneously from pLS103, which carried a single copy of the leu region. Plasmid preparations from strains harboring pLS104 also contained the original plasmid, pLS103, and, in some preparations, plasmids carrying three or four repetitions of the leu region. These plasmids were shown to be generated by recombination between homologous deoxyribonucleic acid (DNA) segments in the tandemly repeated DNA regions on the plasmids, but not by recombinations between specific DNA sites. These phenomena were observed in a recE4-Independent background, showing that recombination of the homologous DNA sequences does not require the recE-Independent gene product(s).     

Construction of a microphage variant of filamentous bacteriophage.

The intergenic region in the genome of the Ff class of filamentous phage (comprising strains fl, fd and M13) genome constitutes 8% of the viral genome, and has essential functions in DNA replication and phage morphogenesis. The functional domains of this region may be inserted into separate sites of a plasmid to function independently. Here, we demonstrate the construction of a plasmid containing, sequentially, the origin of (+)-strand synthesis, the packaging signal and a terminator of (+)-strand synthesis. When host cells harboring this plasmid (pLS7) are infected with helper phage they produce a microphage particle containing all the structural elements of the mature, native phage. The microphage is 65 A in diameter and about 500 A long. It contains a 221-base single-stranded circle of DNA coated by about 95 copies of the major coat protein (gene 8 protein).