An integrative approach for the optical sequencing of single DNA molecules

A new approach for optically sequencing ensembles of single DNA molecules using DNA polymerase to mediate the consecutive incorporation of fluorochrome-labeled nucleotides into an array of large single DNA molecules is presented. The approach utilizes cycles of labeled fluorochrome addition, detection to count incorporations, and bleaching to reset the counter. These additions are imaged and analyzed to estimate the number of labeled additions and to correlate them on a per-locus basis along DNA backbones. Initial studies used precisely labeled polymerase chain reaction products to aid the development and validation of simple models of fluorochrome point spread functions within the imaging system. In complementary studies, nucleotides labeled with the fluorochrome R110 were incorporated into surface-elongated lambda DNA, and fluorescent signals corresponding to the addition of R110-dUTP were counted and assigned precise loci along DNA backbones. The labeled DNAs were then subjected to photobleaching and to a second cycle of addition of R110-labeled nucleotides-a second round of additions was correlated with the first to establish strings of addition histories among the ensemble of largely double-stranded templates. These results confirm the basic operational validity of this approach and point the way to the development of a practical system for optical sequencing.     

Analysis of non-template-directed nucleotide addition and template switching by DNA polymerase

DNA polymerases use an uninterrupted template strand to direct synthesis of DNA. However, some DNA polymerases can synthesize DNA across two discontinuous templates by binding and juxtaposing them, resulting in synthesis across the junction. Primer/template duplexes with 3' overhangs are especially efficient substrates, suggesting that DNA polymerases use the overhangs as regions of microhomology for template synapsis. The formation of these overhangs may be the result of non-template-directed nucleotide addition by DNA polymerases. To examine the relative magnitude and mechanism of template switching, we studied the in vitro enzyme kinetics of template switching and non-template-directed nucleotide addition by the 3'-5' exonuclease-deficient large fragment of Escherichia coli DNA polymerase I. Non-template-directed nucleotide addition and template switching were compared to that of standard primer extension. We found that non-template-directed nucleotide addition and template switching showed similar rates and were approximately 100-fold slower than normal template-directed DNA synthesis. Furthermore, non-template-directed nucleotide addition showed a 10-fold preference for adding dAMP to the ends of DNA over that of the other three nucleotides. For template switching, kinetic analysis revealed that the two template substrates acted as a random bireactant system with mixed-type inhibition of substrate binding by one substrate over the other. These data are the first to establish the binding kinetics of two discontinuous DNA substrates to a single DNA polymerase. Our results suggest that although the activities are relatively weak, non-template-directed nucleotide addition and template switching allow DNA polymerases to overcome breaks in the template strand in an error-prone manner.     

Crystallographic analysis of engineered polymerases synthesizing phosphonomethylthreosyl nucleic acid

Xeno-nucleic acids (XNAs) are synthetic genetic polymers with backbone structures composed of non-ribose or non-deoxyribose sugars. Phosphonomethylthreosyl nucleic acid (pTNA), a type of XNA that does not base pair with DNA or RNA, has been suggested as a possible genetic material for storing synthetic biology information in cells. A critical step in this process is the synthesis of XNA episomes using laboratory-evolved polymerases to copy DNA information into XNA. Here, we investigate the polymerase recognition of pTNA nucleotides using X-ray crystallography to capture the post-catalytic complex of engineered polymerases following the sequential addition of two pTNA nucleotides onto the 3′-end of a DNA primer. High-resolution crystal structures reveal that the polymerase mediates Watson–Crick base pairing between the extended pTNA adducts and the DNA template. Comparative analysis studies demonstrate that the sugar conformation and backbone position of pTNA are structurally more similar to threose nucleic acid than DNA even though pTNA and DNA share the same six-atom backbone repeat length. Collectively, these findings provide new insight into the structural determinants that guide the enzymatic synthesis of an orthogonal genetic polymer, and may lead to the discovery of new variants that function with enhanced activity.     

The DNase activity of an endoplasmic reticulum nuclease and its effect on DNA synthesis in vitro

An endoplasmic reticulum nuclease which was isolated previously in this laboratory from rat liver ( Kouidou et al. (1981) Eur.J. Bioch . 120, 9-14) was found to degrade linear and circular single stranded DNA but not double stranded DNA. The DNA fragments resulting from this cleavage were longer than 20 nucleotides. In addition the nuclease was found to improve the efficiency of DNA template used by DNA polymerase I in DNA synthesis in vitro. The results were the same whether incubation of the template with the nuclease was prior to addition of DNA polymerase I or simultaneously with polymerization. When nuclease was added after the completion of polymerization by DNA polymerase I it was ineffective unless the product was denatured. These data further corroborate the observation that double stranded DNA is not cleaved by this enzyme.     

Mechanism of inhibition of bacteriophage T7 DNA synthesis in Escherichia coli B cells infected by alkylated bacteriophage T7

Quantitative analysis of DNA replication, in E. coli B cells infected by methyl methanesulfonate-treated bacteriophage T7, showed that production of phage DNA was delayed and decreased. The cause of the delay appeared to be a delay in host-DNA breakdown, the process which provides nucleotides for phage-DNA synthesis. In addition, reutilisation of host-derived nucleotides was impaired. These observations can be accounted for by a model in which methyl groups on phage DNA slow down DNA injection and also reduce the replicational template activity of the DNA once it has entered the cell. Repair of alkylated phage DNA may be required not only for replication but also for normal injection of DNA.     

Sequence identity of the terminal redundancies on the minus-strand DNA template is necessary but not sufficient for the template switch during hepadnavirus plus-strand DNA synthesis.

The template for hepadnavirus plus-strand DNA synthesis is a terminally redundant minus-strand DNA. An intramolecular template switch during plus-strand DNA synthesis, which permits plus-strand DNA elongation, has been proposed to be facilitated by this terminal redundancy, which is 7 to 9 nucleotides long. The aim of this study was to determine whether the presence of identical copies of the redundancy on the minus-strand DNA template was necessary and/or sufficient for the template switch and at what position(s) within the redundancy the switch occurs for duck hepatitis B virus. When dinucleotide insertions were placed within the copy of the redundancy at the 3' end of the minus-strand DNA template, novel sequences were copied into plus-strand DNA. The generation of these novel sequences could be explained by complete copying of the redundancy at the 5' end of the minus-strand DNA template followed by a template switch and then extension from a mismatched 3' terminus. In a second set of experiments, it was found that when one copy of the redundancy had either three or five nucleotides replaced the template switch was inhibited. When the identical, albeit mutant, sequences were restored in both copies of the redundancy, template switching was not necessarily restored. Our results indicate that the terminal redundancy on the minus-strand DNA template is necessary but not sufficient for template switching.     

Enhanced processivity of nuclear matrix bound DNA polymerase alpha from regenerating rat liver

Translocation of DNA during in vitro DNA synthesis on nuclear matrix bound replicational assemblies from regenerating rat liver was determined by measuring the processivity (average number of nucleotides added following one productive binding event of the polymerase to the DNA template) of nuclear matrix bound DNA polymerase alpha with poly(dT).oligo(A)10 as template primer. The matrix-bound polymerase had an average processivity (28.4 nucleotides) that was severalfold higher than the bulk nuclear DNA polymerase alpha activity extracted during nuclear matrix preparation (8.9 nucleotides). ATP at 1 mM markedly enhanced the activity and processivity of the matrix-bound polymerase but not the corresponding salt-soluble enzyme. The majority of the ATP-dependent activity and processivity enhancement was completed by 100 microM ATP and included products ranging up to full template length (1000-1200 nucleotides). Average processivity of the net ATP-stimulated polymerase activity exceeded 80 nucleotides with virtually all the DNA products greater than 50 nucleotides. Release of nuclear matrix bound DNA polymerase alpha by sonication resulted in a loss of ATP stimulation of activity and a corresponding decrease in processivity to a level similar to that of the salt-soluble polymerase (6.8 nucleotides). All nucleoside di- and triphosphates were as effective as ATP. Stimulation of both activity and processivity by the nonhydrolyzable ATP analogues adenosine 5'-O-(3-thiotriphosphate), 5'-adenylyl imidodiphosphate, and adenosine 5'-O-(1-thiotriphosphate) further suggested that the hydrolysis of ATP is not required for enhancement to occur.(ABSTRACT TRUNCATED AT 250 WORDS)     

Initiation of bacteriophage PRD1 DNA replication on single-stranded templates

In vitro studies have demonstrated that single-stranded DNA molecules containing the 3' terminal nucleotides of the PRD1 DNA replication origin can support initiation by a protein-primed mechanism. We have determined the minimal requirements for priming by analyzing the template activity of various deletion derivatives. Our results showed that the 3'-terminal 15 nucleotides of the replication origin are sufficient for priming. The finding that the requirements for recognition of replication origin are different from those for priming suggests that there are two distinct steps during initiation of PRD1 DNA replication: first, recognition of the replication origin on double-stranded DNA and second, the priming event on single-stranded DNA. In addition our results showed that additional bases at the 3' end of templates did not affect priming activity, suggesting that the priming site is searched for from inside the template.     

Dynamics of nucleotide incorporation: snapshots revealed by 2-aminopurine fluorescence studies

Formation of a noncanonical base pair between dFTP, a dTTP analogue that cannot form H bonds, and the fluorescent base analogue 2-aminopurine (2AP) was studied in order to discover how the bacteriophage T4 DNA polymerase selects nucleotides with high accuracy. Changes in 2AP fluorescence intensity provided a spectroscopic reporter of the nucleotide binding reactions, which were combined with rapid-quench, pre-steady-state reactions to measure product formation. These studies supported and extended previous findings that the T4 DNA polymerase binds nucleotides in multiple steps with increasing selectivity. With 2AP in the template position, initial dTTP binding was rapid but selective: K(d(dTTP)) (first step) = 31 microM; K(d(dCTP)) (first step) approximately 3 mM. In studies with dFTP, this step was revealed to have two components: formation of an initial preinsertion complex in which H bonds between bases in the newly forming base pair were not essential, which was followed by formation of a final preinsertion complex in which H bonds assisted. The second nucleotide binding step was characterized by increased discrimination against dTTP binding opposite template 2AP, K(d) (second step) = 367 microM, and additional conformational changes were detected in ternary enzyme-DNA-dTTP complexes, as expected for forming closed complexes. We demonstrate here that the second binding step occurs before formation of the phosphodiester bond. Thus, the high fidelity of nucleotide insertion by T4 DNA polymerase is accomplished by the sequential application of selectivity in first forming accurate preinsertion complexes, and then additional conformational changes are applied that further increase discrimination against incorrect nucleotides.     

Template-directed primer extension catalyzed by the Tetrahymena ribozyme.

The Tetrahymena ribozyme has been shown to catalyze an RNA polymerase-like reaction in which an RNA primer is extended by the sequential addition of pN nucleotides derived from GpN dinucleotides, where N = A, C, or U. Here, we show that this reaction is influenced by the presence of a template; bases that can form Watson-Crick base pairs with a template add as much as 25-fold more efficiently than mismatched bases. A mutant enzyme with an altered guanosine binding site can catalyze template-directed primer extension with all four bases when supplied with dinucleotides of the form 2-aminopurine-pN.     

Using 2-aminopurine fluorescence to measure incorporation of incorrect nucleotides by wild type and mutant bacteriophage T4 DNA polymerases

The ability of wild type and mutant T4 DNA polymerases to discriminate in the utilization of the base analog 2-aminopurine (2AP) and the fluorescence of 2AP were used to determine how DNA polymerases distinguish between correct and incorrect nucleotides. Because T4 DNA polymerase incorporates dTMP opposite 2AP under single-turnover conditions, it was possible to compare directly the kinetic parameters for incorporation of dTMP opposite template 2AP to the parameters for incorporation of dTMP opposite template A without the complication of enzyme dissociation. The most significant difference detected was in the K(d) for dTTP, which was 10-fold higher for incorporation of dTMP opposite template 2AP (approximately 367 microm) than for incorporation of dTMP opposite template A (approximately 31 microm). In contrast, the dTMP incorporation rate was reduced only about 2-fold from about 318 s(-1) with template A to about 165 s(-1) for template 2AP. Discrimination is due to the high selectivity in the initial nucleotide-binding step. T4 DNA polymerase binding to DNA with 2AP in the template position induces formation of a nucleotide binding pocket that is preshaped to bind dTTP and to exclude other nucleotides. If nucleotide binding is hindered, initiation of the proofreading pathway acts as an error avoidance mechanism to prevent incorporation of incorrect nucleotides.     

Maize replicative alpha-type DNA polymerase: separation of polymerase and primase activities and recognition of primase subunits

DNA polymerase and DNA primase activities in the maize α-type DNA polymerase 2 were dissociated and DNA polymerase-free DNA primase was studied. DNA primase synthesized primers that were 8–34 nucleotides long, with more intense bands at 15–17 nucleotides in length. DNA polymerase 1 (a putative δ-type enzyme) or DNA polymerase 2 were assayed after template-priming with purified DNA primase and showed a differential use of templates: whereas DNA polymerase 2 used a polydT template more efficiently than a natural template, DNA polymerase 1 used both of them poorly. The molecular size of DNA primase was estimated to be 68 kDa by gel filtration, western blotting and by a DNA primase 'trapping' assay.     

Convergent DNA synthesis: a non-enzymatic dimerization approach to circular oligodeoxynucleotides.

We report a novel convergent approach to the construction of circular DNA oligonucleotides from two smaller linear precursors. Circular DNAs 34-74 nucleotides (nt) in size are constructed non-enzymatically in a single step from two half-length oligomers. A DNA template is used to assemble the constituent parts into a triple helical complex which brings the four reactive ends together for chemical ligation with BrCN/imidazole/Ni2+. A homodimerization reaction strategy is successfully used on a small scale to construct circles 42, 58 and 74 nt in size. In addition, a heterodimerization strategy is successfully used in two cases to construct circular 34mers from different 16mer and 18mer precursors. Measurement of preparative yields for one biologically active 34mer circle shows that the dimerization strategy gives a yield higher than that from conventional cyclization and nearly as high as that for a normally synthesized linear DNA, establishing that there is not necessarily a yield penalty for circle construction. Six additional preparative circle constructions, giving conversions of approximately 33-85% from precursors to circular product, are also described. Convergent strategies allow the construction of medium and large size DNA molecules in higher yields than can be achieved by standard linear synthesis alone.     

Dissection of RNA-primed DNA synthesis catalyzed by gene 4 protein and DNA polymerase of bacteriophage T7. Coupling of RNA primer and DNA synthesis

Gene 4 protein and DNA polymerase of bacteriophage T7 catalyze RNA-primed DNA synthesis on single-stranded DNA templates. T7 DNA polymerase exhibits an affinity for both gene 4 protein and single-stranded DNA, and gene 4 protein binds stably to single-stranded DNA in the presence of dTTP (Nakai, H. and Richardson, C. C. (1986) J. Biol. Chem. 261, 15208-15216). Gene 4 protein-T7 DNA polymerase-template complexes may be formed in both the presence and absence of nucleoside 5'-triphosphates. The protein-template complexes may be isolated free of unbound proteins and nucleotides by gel filtration and will catalyze RNA-primed DNA synthesis in the presence of ATP, CTP, and the four deoxynucleoside 5'-triphosphates. RNA-primed DNA synthesis may be dissected into separate reactions for primer synthesis and DNA synthesis. Upon incubation of gene 4 protein with single-stranded DNA, ATP, and CTP, a primer-template complex is formed; it is likely that gene 4 protein mediates stable binding of the oligonucleotide to the template. The complex, purified free of unbound proteins and nucleotides, supports DNA synthesis upon addition of DNA polymerase and deoxynucleoside 5'-triphosphates. Association of primers with the template is increased by the presence of dTTP or DNA polymerase during primer synthesis. DNA synthesis supported by primer-template complexes initiates predominantly at gene 4 recognition sequences, indicating that primers are bound to the template at these sites.     

The functional role of a DNA primase in chloroplast DNA replication in Chlamydomonas reinhardtii.

A complementation experiment was developed to identify the protein component that is essential for the in vitro replication of a cloned template containing a chloroplast DNA replication origin of Chlamydomonas reinhardtii. Using this method, we have identified a DNA primase activity that copurified with DNA polymerase from the crude protein mixture. The primase catalyzed the synthesis of short RNA primers on single-stranded DNA templates. Among the synthetic templates, the order of preference was poly(dA), poly(dT), and poly(dC). The primer size range for these templates was 11-18, 5-12, and 3-11 nucleotides, respectively. On a single-stranded template containing the chloroplast DNA replication origin, the primer length range reached 19 to 27 nucleotides, indicating a better processtivity. Several initiation sites were mapped on both strands of the cloned replication origin. Some preferential initiation sites were located on A tracks spaced at one helical turn apart within the bending locus. Primase improved the template specificity of the in vitro DNA replication system and enhanced the incorporation of radioactive dATP into the supercoiled template containing the core sequences of the chloroplast DNA replication origin.