Quantitation and purification of polymerase chain reaction products by high-performance liquid chromatography

This work describes the application of the fully automated high-performance liquid chromatographic system to the analysis of PCR-amplified products. Efficient separations of both DNA restriction fragments and PCR products were performed using an anion-exchange DEAE-NPR column, packed with 2.5-μm nonporous particles. The automated HPLC method was employed for the separation, quantitation, and purification of PCR products in less than 10 min in a single step.     

Rapid analysis and purification of polymerase chain reaction products by high-performance liquid chromatography

This report describes the use of high-performance liquid chromatography (HPLC) for the rapid analysis and purification of the polymerase chain reaction products. Employing a new anion-exchange nonporous column, efficient separations of both DNA restriction fragments and amplified PCR products are achieved in 10 to 20 minutes and quantitated within +/- 10%. The performance of the HPLC technique is described in terms of resolution, reproductibility, sensitivity and micropreparative capability and compared to that of gel electrophoresis for this application.     

Quantification of polymerase chain reaction products by affinity-based hybrid collection.

We have used oligonucleotides modified with biotin in the 5'-end as primers in the polymerase chain reaction (PCR)-amplification. This results in the synthesis of 5'-biotinylated DNA molecules, which are detected by hybridization to a labelled probe in solution. The formed hybrids are collected on an avidin-matrix by mediation of the biotin residue of the target molecules. The affinity-based hybrid collection method is quantitative and makes it possible to measure the amount of DNA produced in the PCR-amplification. At low concentrations of template the efficiency of the process is close to 100%, making it possible to detect the presence of a few molecules of target DNA in 25 cycles. With high template concentrations the efficiency of the process is low.     

Targeted gene walking polymerase chain reaction.

We describe a modification of a polymerase chain reaction method called 'targeted gene walking' that can be used for the amplification of unknown DNA sequences adjacent to a short stretch of known sequence by using the combination of a single, targeted sequence specific PCR primer with a second, nonspecific 'walking' primer. This technique can replace conventional cloning and screening methods with a single step PCR protocol to greatly expedite the isolation of sequences either upstream or downstream from a known sequence. A number of potential applications are discussed, including its utility as an alternative to cloning and screening for new genes or cDNAs, as a method for searching for polymorphic sites, restriction endonuclease or regulatory regions, and its adaptation to rapidly sequence DNA of lengthy unknown regions that are contiguous to known genes.     

Detection of beta-globin gene mutations by polymerase chain reaction.

The polymerase chain reaction and oligonucleotide probe hybridization technique were applied to the detection of two common mutations of the beta-globin gene found in Chinese, namely the 4-base pair deletion at the 41-42 codons and the C to T substitution at nucleotide 654 of IVS-2. The accuracy of the method was established using beta-thalassemia cases with known mutations or haplotypes of the restriction fragment length polymorphism (RFLP). A further 11 cases of thalassemia intermediate and thalassemia minor were then analysed with the same approach. Our results showed that 5 of the 11 cases carried the TCTT-deletion at codons 41-42. Our method is economical both in terms of materials and time needed and in an alternative to the use of the molecular RFLP approach in the prenatal diagnosis of beta-thalassemia.     

Quantification of Leishmania infantum parasites in tissue biopsies by real-time polymerase chain reaction and polymerase chain reaction-enzyme-linked immunosorbent assay

Most of the experimental studies of Leishmania spp. infection require the determination of the parasite load in different tissues. Quantification of parasites by microscopy is not very sensitive and is time consuming, whereas culture microtitrations remain laborious and can be jeopardized by microbial contamination. The aim of this study was to quantify Leishmania infantum parasites by real-time polymerase chain reaction (PCR) using specific DNA TaqMan probes and to compare the efficacy of detection of this technique with a PCR-enzyme-linked immunosorbent assay (ELISA). For this purpose, spleen and liver samples from L. infantum-infected mice were collected during a 3-mo longitudinal study and analyzed by both methods. PCR-ELISA failed to quantify Leishmania spp. DNA in samples with very low or very high numbers of parasites. Real-time PCR was more sensitive than PCR-ELISA, detecting down to a single parasite, and enabled the parasite quantification over a wide, 5-log range. In summary, this study developed a method for absolute quantification of L. infantum parasites in infected organs using real-time TaqMan PCR.     

Measurement of branched chain amino acids in blood plasma by high performance liquid chromatography

A simple and rapid high performance liquid chromatographic technique is described for the separation and quantitation of plasma branched chain amino acids. After addition of a norleucine internal standard, plasma samples are acidified with acetic acid, and amino acids are separated from proteins and other plasma components by passage of the acidified plasma through an ion exchange resin. The ammonium hydroxide eluate from the resin is dried, phenylisothiocyanate derivatives are prepared, and the amino acids are separated on a Waters reverse-phase "Pico-Tag" column with an ultraviolet detector set at 254 nm. In addition to the branched chain amino acids (leucine, valine, and isoleucine), aspartate, glutamate, serine, threonine, alanine, and methionine are quantitated with high precision and accuracy, as verified by quantitative recovery and comparison with an automatic amino acid analyzer. The advantages of the method are its simplicity, speed, stability of derivatives, high reproducibility, low per-sample cost, and the use of a simple fixed-wavelength ultraviolet detector.     

Quantification of DNA sequences obtained by polymerase chain reaction using a bioluminescent adsorbent.

We studied various parameters affecting the sensitivity of assays that use nucleic acid hybridization in solution followed by capture of the hybrid on a solid phase. Sensitivity is limited not only by nonspecific binding of the detection components but also by reannealing of the target or probe to itself. To perform sensitive assays, the probe concentration must be low enough to reduce high nonspecific binding. Under these conditions, however, the strand displacement reaction or the reannealing of the target to itself drastically decreases the hybridization yield, particularly when the target and the probes are different sizes. To improve DNA detection, we propose a sandwich method based on hybridization of oligonucleotides with a single-strand DNA obtained by polymerase chain reaction under asymmetric conditions. The assay can be performed in one step using a bioluminescent detection procedure which does not require any separation step. The specificity of the method is sufficient to perform a rapid detection and quantification of papillomavirus in biological samples.     

Quantification of l-stepholidine in rat brain and plasma by high performance liquid chromatography combined with fluorescence detection

A sensitive and reliable assay for the quantification of l-stepholidine (SPD) in rat plasma and brain was developed using high performance liquid chromatography (HPLC) combined with fluorescence detection. Brain regions (prefrontal cortex, striatum, and cerebellum) and plasma from rats treated with SPD (10 mg/kg s.c.) 20, 40, 60, or 90 min prior to euthanasia were analyzed for SPD levels. Brain samples were homogenized in ice-cold 0.1M perchloric acid and centrifuged to remove proteins. The supernatants and diluted plasma samples, to which O-desmethylvenlafaxine was added as a process standard, were basified and extracted with ethyl acetate. The organic phase was taken to dryness and the residue taken up in mobile phase. The samples were then injected into an HPLC equipped with a fluorescence detector (excitation and emission wavelengths set at 280 and 320 nm, respectively). The mean recovery of SPD was 74.6%, and reliability studies confirmed the reproducibility of the assay (intra- and inter-assay coefficients of variation of 4.8% and 5.3%, respectively). The assay was readily applicable to the brain and plasma samples obtained from rats injected with SPD as described above; the levels and patterns of disappearance of SPD in brain regions and plasma are shown.     

Assay of bovine fibrinopeptides by high performance liquid chromatography.

A method for separating small amounts (<10^?5 mol) of bovine fibrinopeptides A and B employing high performance liquid chromatography has been developed. The limit of detectability of this method is about 10^?10 mol of fibrinopeptide. The separation was achieved within 20 min under reversed phase conditions using isocratic elution with aqueous buffer-acetonitrile solvent systems.     

Quantification of the antifungal lipopeptide iturin A by high performance liquid chromatography coupled with aqueous two-phase extraction

Iturin A, a powerful antifungal surfactant, is a kind of bacterial lipopeptide produced by Bacillus strains. This study addresses the use of an aqueous two-phase system (ATPS) using ethanol/ammonium sulfate to extract iturin A from Bacillus amyloliquefaciens NJN-6 fermentation broth and the quantification of iturin A by HPLC. Baseline separation of iturin A homologues was performed using an RP-C(18) column with a mixture of water and acetonitrile. The results showed that the correlation coefficient between integral area and concentration was 0.9961 within the range of 20-140 mg/l. The RSD of the retention time and the peak area were 1.29% and 1.45%, respectively. The effects of some operating parameters in ATPS, e.g., pH, temperature and centrifugation time, were also studied. This method can be successfully used for the rapid quantification of iturin A.     

Detection of coliform bacteria in water by polymerase chain reaction and gene probes.

Polymerase chain reaction (PCR) amplification and gene probe detection of regions of two genes, lacZ and lamB, were tested for their abilities to detect coliform bacteria. Amplification of a segment of the coding region of Escherichia coli lacZ by using a PCR primer annealing temperature of 50 degrees C detected E. coli and other coliform bacteria (including Shigella spp.) but not Salmonella spp. and noncoliform bacteria. Amplification of a region of E. coli lamB by using a primer annealing temperature of 50 degrees C selectively detected E. coli and Salmonella and Shigella spp. PCR amplification and radiolabeled gene probes detected as little as 1 to 10 fg of genomic E. coli DNA and as a few as 1 to 5 viable E. coli cells in 100 ml of water. PCR amplification of lacZ and lamB provides a basis for a method to detect indicators of fecal contamination of water, and amplification of lamB in particular permits detection of E. coli and enteric pathogens (Salmonella and Shigella spp.) with the necessary specificity and sensitivity for monitoring the bacteriological quality of water so as to ensure the safety of water supplies.     

Optimization of the performance of the polymerase chain reaction in silicon-based microstructures.

We have demonstrated the ability to perform real-time homogeneous, sequence specific detection of PCR products in silicon microstructures. Optimal design/ processing result in equivalent performance (yield and specificity) for high surface-to-volume silicon structures as compared to larger volume reactions in polypropylene tubes. Amplifications in volumes as small as 0.5 microl and thermal cycling times reduced as much as 5-fold from that of conventional systems have been demonstrated for the microstructures.     

Quantification of airborne Aspergillus fumigatus spores in rabbit houses by real-time polymerase chain reaction

To accurately quantify airborne Aspergillus fumigatus (A. fumigatus) spores in rabbit houses, the real-time polymerase chain reaction (real-time PCR) and culture-based counting method (CCM) were employed to determine the airborne A. fumigatus spore concentrations. The results showed that, of the three rabbit houses (A, B, and C), the average concentrations of airborne A. fumigatus spores determined by real-time PCR were 3.0 × 10³, 3.3 × 10³, and 1.5 × 10³ spores/m³ air, respectively, while those determined by CCM were 2.5 × 10², 2.8 × 10², and 1.1 × 10² colony-forming unit/m³ air (CFU/m³ air), respectively, i.e., the former concentration was 12–14 times higher than the latter one. Therefore, the conventional CCM underestimated the concentrations of airborne fungal spores, and it is insufficient to determine the microbial aerosol concentration and evaluate the health risk only using CCM.