Coordination and geometry of the nickel atom in active methyl-coenzyme M reductase from Methanothermobacter marburgensis as detected by X-ray absorption spectroscopy

Methyl-coenzyme M reductase (MCR) catalyzes the reduction of methyl-coenzyme M (CH(3)-S-CoM) to methane. The enzyme contains as a prosthetic group the nickel porphinoid F(430) which in the active enzyme is in the EPR-detectable Ni(I) oxidation state. Crystal structures of several inactive Ni(II) forms of the enzyme but not of the active Ni(I) form have been reported. To obtain structural information on the active enzyme-substrate complex we have now acquired X-ray absorption spectra of active MCR in the presence of either CH(3)-S-CoM or the substrate analog coenzyme M (HS-CoM). For both MCR complexes the results are indicative of the presence of a five-coordinate Ni(I), the five ligands assigned as four nitrogen ligands from F(430) and one oxygen ligand. Analysis of the spectra did not require the presence of a sulfur ligand indicating that CH(3)-S-CoM and HS-CoM were not coordinated via their sulfur atom to nickel in detectable amounts. As a control, X-ray absorption spectra were evaluated of three enzymatically inactive MCR forms, MCR-silent, MCR-ox1-silent and MCR-ox1, in which the nickel is known to be six-coordinate. Comparison of the edge position of the X-ray absorption spectra revealed that the Ni(I) in the active enzyme is more reduced than the Ni in the two EPR-silent Ni(II) states. Surprisingly, the edge position of the EPR-active MCR-ox1 state was found to be the same as that of the two silent states indicating similar electron density on the nickel.     

Characterization of alkyl-nickel adducts generated by reaction of methyl-coenzyme m reductase with brominated acids

Methyl-coenzyme M reductase (MCR) from methanogenic archaea catalyzes the final step in the biological synthesis of methane. Using coenzyme B (CoBSH) as the two-electron donor, MCR reduces methyl-coenzyme M (methyl-SCoM) to methane and the mixed disulfide, CoB-S-S-CoM. MCR contains coenzyme F430, an essential redox-active nickel tetrahydrocorphin, at its active site. The active form of MCR (MCRred1) contains Ni(I)-F430. When 3-bromopropane sulfonate (BPS) is incubated with MCRred1, an alkyl-Ni(III) species is formed that elicits the MCRPS EPR signal. Here we used EPR and UV-visible spectroscopy and transient kinetics to study the reaction between MCR from Methanothermobacter marburgensis and a series of brominated carboxylic acids, with carbon chain lengths of 4-16. All of these compounds give rise to an alkyl-Ni intermediate with an EPR signal similar to that of the MCRPS species. Reaction of the alkyl-Ni(III) adduct, formed from brominated acids with eight or fewer total carbons, with HSCoM as nucleophile at pH 10.0 results in the formation of a thioether coupled to regeneration of the active MCRred1 state. When reacted with 4-bromobutyrate, MCRred1 forms the alkyl-Ni(III) MCRXA state and then, surprisingly, undergoes "self-reactivation" to regenerate the Ni(I) MCRred1 state and a bromocarboxy ester. The results demonstrate an unexpected reactivity and flexibility of the MCR active site in accommodating a broad range of substrates, which act as molecular rulers for the substrate channel in MCR.     

The magnetic and electronic properties of Methanobacterium thermoautotrophicum (strain delta H) methyl coenzyme M reductase and its nickel tetrapyrrole cofactor F430. A low temperature magnetic circular dichroism study

Variable temperature magnetic circular dichroism (MCD) spectroscopy has been used to characterize the magnetic and electronic properties of the Ni(II) tetrapyrrole, F430, which is the cofactor of the S-methyl coenzyme M methylreductase enzyme from Methanobacterium thermoautotrophicum (strain delta H). 4-Coordinate forms are found to be diamagnetic (S = 0 ground state), whereas 6-coordinate forms are paramagnetic (S = 1 ground state). MCD studies, together with parallel low temperature UV-visible absorption and resonance Raman investigations, show that the equilibrium distribution of 4-coordinate square-planar and 6-coordinate bis-aquo forms of the native isomer of F430 in aqueous solution is affected by both temperature and the presence of glycerol. In the presence of 50% glycerol, the 12,13-diepimer of F430 is shown to be partially 6-coordinate in frozen solution at low temperature. Low temperature MCD magnetization data allow the determination of the axial zero-field splitting (D) of the S = 1 ground state of bis-ligand complexes of F430. The value of D is sensitive to the nature of the Ni(II) axial ligands: bis-aquo F430, D = +9 +/- 1 cm-1; bis-imidazole F430, D = -8 +/- 2 cm-1. Measurement of D = +10 +/- 1 cm-1 for F430 in the methylreductase holoenzyme argues strongly against histidine imidazole coordination to Ni(II) in the enzyme. The possible existence of alcoholic or phenolic oxygen-containing ligands (serine, threonine, tyrosine, water) to Ni(II) in the enzyme-bound cofactor is discussed.     

Spectroscopic investigation of the nickel-containing porphinoid cofactor F<Subscript>430</Subscript>. Comparison of the free cofactor in the +1, +2 and +3 oxidation states with the cofactor bound to methyl-coenzyme M reductase in the silent,red and ox forms

Methyl-coenzyme M reductase (MCR) catalyzes the methane-forming step in methanogenic archaea. It contains the nickel porphinoid F₄₃₀, a prosthetic group that has been proposed to be directly involved in the catalytic cycle by the direct binding and subsequent reduction of the substrate methyl-coenzyme M. The active enzyme (MCRred1) can be generated in vivo and in vitro by reduction from MCRox1, which is an inactive form of the enzyme. Both the MCRred1 and MCRox1 forms have been proposed to contain F₄₃₀ in the Ni(I) oxidation state on the basis of EPR and ENDOR data. In order to further address the oxidation state of the Ni center in F₄₃₀, variable-temperature, variable-field magnetic circular dichroism (VTVH MCD), coupled with parallel absorption and EPR studies, have been used to compare the electronic and magnetic properties of MCRred1, MCRox1, and various EPR silent forms of MCR, with those of the isolated penta-methylated cofactor (F₄₃₀M) in the +1, +2 and +3 oxidation states. The results confirm Ni(I) assignments for MCRred1 and MCRred2 forms of MCR and reveal charge transfer transitions involving the Ni d orbitals and the macrocycle orbitals that are unique to Ni(I) forms of F₄₃₀. Ligand field transitions associated with S=1 Ni(II) centers are assigned in the near-IR MCD spectra of MCRox1-silent and MCR-silent, and the splitting in the lowest energy d–d transition is shown to correlate qualitatively with assessments of the zero-field splitting parameters determined by analysis of VTVH MCD saturation magnetization data. The MCD studies also support rationalization of MCRox1 as a tetragonally compressed Ni(III) center with an axial thiolate ligand or a coupled Ni(II)-thiyl radical species, with the reality probably lying between these two extremes. The reinterpretation of MCRox1 as a formal Ni(III) species rather than an Ni(I) species obviates the need to invoke a two-electron reduction of the F₄₃₀ macrocyclic ligand on reductive activation of MCRox1 to yield MCRred1.Electronic Supplementary Material Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00775-004-0549-9Abbreviations F₄₃₀ cofactor 430 - F₄₃₀M penta-methylated form of cofactor 430 - Ni(I)F₄₃₀M F₄₃₀M with the nickel atom in the +1 oxidation state - Ni(II)F₄₃₀M F₄₃₀M with the nickel atom in the +2 oxidation state - Ni(III)F₄₃₀M F₄₃₀M with the nickel atom in the +3 oxidation state - MCR methyl-coenzyme M reductase - MCRox1 MCR exhibiting the MCR-ox1 EPR signal - MCRox1-silent EPR silent form of MCR obtained from the MCRox1 form - MCRred1 MCR exhibiting the EPR signals red1c and/or red1m - MCRred1c MCRred1 in the presence of coenzyme M - MCRred1m MCRred1 in the presence of methyl-coenzyme M - MCRred2 MCR exhibiting both the red1 and red2 EPR signals - MCRred1-silent EPR silent form of MCR obtained from the MCRred1 form - MCRsilent EPR silent form of MCR     

Spectroscopic and kinetic studies of the reaction of bromopropanesulfonate with methyl-coenzyme M reductase

Methyl-coenzyme M reductase (MCR) catalyzes the final step of methanogenesis in which coenzyme B and methyl-coenzyme M are converted to methane and the heterodisulfide, CoMS-SCoB. MCR also appears to initiate anaerobic methane oxidation (reverse methanogenesis). At the active site of MCR is coenzyme F430, a nickel tetrapyrrole. This paper describes the reaction of the active MCR(red1) state with the potent inhibitor, 3-bromopropanesulfonate (BPS; I50 = 50 nM) by UV-visible and EPR spectroscopy and by steady-state and rapid kinetics. BPS was shown to be an alternative substrate of MCR in an ionic reaction that is coenzyme B-independent and leads to debromination of BPS and formation of a distinct state ("MCR(PS)") with an EPR signal that was assigned to a Ni(III)-propylsulfonate species (Hinderberger, D., Piskorski, R. P., Goenrich, M., Thauer, R. K., Schweiger, A., Harmer, J., and Jaun, B. (2006) Angew. Chem. Int. Ed. Engl. 45, 3602-3607). A similar EPR signal was generated by reacting MCR(red1) with several halogenated sulfonate and carboxylate substrates. In rapid chemical quench experiments, the propylsulfonate ligand was identified by NMR spectroscopy and high performance liquid chromatography as propanesulfonic acid after protonolysis of the MCR(PS) complex. Propanesulfonate formation was also observed in steady-state reactions in the presence of Ti(III) citrate. Reaction of the alkylnickel intermediate with thiols regenerates the active MCR(red1) state and eliminates the propylsulfonate group, presumably as the thioether. MCR(PS) is catalytically competent in both the generation of propanesulfonate and reformation of MCR(red1). These results provide evidence for the intermediacy of an alkylnickel species in the final step in anaerobic methane oxidation and in the initial step of methanogenesis.     

Detection of organometallic and radical intermediates in the catalytic mechanism of methyl-coenzyme M reductase using the natural substrate methyl-coenzyme M and a coenzyme B substrate analogue

Methyl-coenzyme M reductase (MCR) from methanogenic archaea catalyzes the terminal step in methanogenesis using coenzyme B (CoBSH) as the two-electron donor to reduce methyl-coenzyme M (methyl-SCoM) to form methane and the heterodisulfide, CoBS-SCoM. The active site of MCR contains an essential redox-active nickel tetrapyrrole cofactor, coenzyme F(430), which is active in the Ni(I) state (MCR(red1)). Several catalytic mechanisms have been proposed for methane synthesis that mainly differ in whether an organometallic methyl-Ni(III) or a methyl radical is the first catalytic intermediate. A mechanism was recently proposed in which methyl-Ni(III) undergoes homolysis to generate a methyl radical (Li, X., Telser, J., Kunz, R. C., Hoffman, B. M., Gerfen, G., and Ragsdale, S. W. (2010) Biochemistry 49, 6866-6876). Discrimination among these mechanisms requires identification of the proposed intermediates, none of which have been observed with native substrates. Apparently, intermediates form and decay too rapidly to accumulate to detectible amounts during the reaction between methyl-SCoM and CoBSH. Here, we describe the reaction of methyl-SCoM with a substrate analogue (CoB(6)SH) in which the seven-carbon heptanoyl moiety of CoBSH has been replaced with a hexanoyl group. When MCR(red1) is reacted with methyl-SCoM and CoB(6)SH, methanogenesis occurs 1000-fold more slowly than with CoBSH. By transient kinetic methods, we observe decay of the active Ni(I) state coupled to formation and subsequent decay of alkyl-Ni(III) and organic radical intermediates at catalytically competent rates. The kinetic data also revealed substrate-triggered conformational changes in active Ni(I)-MCR(red1). Electron paramagnetic resonance (EPR) studies coupled with isotope labeling experiments demonstrate that the radical intermediate is not tyrosine-based. These observations provide support for a mechanism for MCR that involves methyl-Ni(III) and an organic radical as catalytic intermediates. Thus, the present study provides important mechanistic insights into the mechanism of this key enzyme that is central to biological methane formation.     

Characterization of the MCRred2 form of methyl-coenzyme M reductase: a pulse EPR and ENDOR study

Methyl-coenzyme M reductase (MCR), which catalyses the reduction of methyl-coenzyme M (CH(3)-S-CoM) with coenzyme B (H-S-CoB) to CH(4) and CoM-S-S-CoB, contains the nickel porphinoid F430 as prosthetic group. The active enzyme exhibits the Ni(I)-derived axial EPR signal MCR(red1) both in the absence and presence of the substrates. When the enzyme is competitively inhibited by coenzyme M (HS-CoM) the MCR(red1) signal is partially converted into the rhombic EPR signal MCR(red2). To obtain deeper insight into the geometric and electronic structure of the red2 form, pulse EPR and ENDOR spectroscopy at X- and Q-band microwave frequencies was used. Hyperfine interactions of the four pyrrole nitrogens were determined from ENDOR and HYSCORE data, which revealed two sets of nitrogens with hyperfine couplings differing by about a factor of two. In addition, ENDOR data enabled observation of two nearly isotropic (1)H hyperfine interactions. Both the nitrogen and proton data indicate that the substrate analogue coenzyme M is axially coordinated to Ni(I) in the MCR(red2) state.     

Structural heterogeneity and purification of protein-free F430 from the cytoplasm of Methanobacterium thermoautotrophicum

F430 is the nickel containing tetrapyrrole cofactor of S-methyl coenzyme M methylreductase, the enzyme that catalyzes the final step of methane production by methanogenic bacteria: the reduction of S-methyl coenzyme M (H3CSCH2CH2SO3-) to methane and coenzyme M (HSCH2CH2SO3-). The protein-free F430 obtained from the cytosol of Methanobacterium thermoautotrophicum, strain delta H, exists predominantly in two isomeric forms that differ in relative stereochemical disposition of acid side chains at the 12 and 13 positions of the macrocycle periphery (Pfaltz, A., Livingston, D. A., Jaun, B., Diekert, G., Thauer, R. K., and Eschenmoser, A. (1985) Helv. Chim. Acta 68, 1338-1358). A simple one-step chromatographic procedure for the large-scale separation of these isomers is described. X-ray absorption spectroscopic studies show that F430 (i.e. the native isomer) is 6-coordinate with long nickel-ligand bonds (approximately 2.1 A), suggesting an approximately planar macrocycle. In contrast, the 12,13-diepimer exhibits a 4-coordinate, square-planar structure with short nickel-nitrogen bonds (approximately 1.9 A), suggesting a ruffled macrocycle. Previous reports, based on other x-ray absorption spectroscopic data, of static disorder in F430 Ni-N distances are shown to be incorrect due to sample heterogeneity. The optical spectrum of F430 (whether purified from the protein-free cytosol or extracted at high ionic strength from the holoenzyme) differs significantly from that of the 12,13-diepimer. The optical spectral differences are correlated with the alterations in coordination number and geometry of the central nickel ion in the two F430 isomers.     

Ni(II) and Ni(I) forms of pentaalkylamide derivatives of cofactor F430 of Methanobacterium thermoautotrophicum.

A series of pentaalkylamide forms of F430 and of its 12,13-diepimer have been generated and characterized. Carbodiimide-assisted N-hydroxysulfosuccinimide activation of all five peripheral carboxylates of the F430 macrocycle allows nucleophilic attack by a number of primary amines (RNH2, R- = CH3-, CH3CH2-, CF3CH2-, CH3(CH2)3-) generating the pentaalkylamide derivatives. The identity of each derivative has been verified by fast-atom bombardment mass spectrometry (FAB-MS). The solubility of these derivatives in aprotic organic solvents varies as the amine alkyl substituent (R-) is changed. Electrochemical measurements have shown that the Ni(II/I) reduction potentials in N,N-dimethylformamide (DMF) are approximately -1 V (Ag/AgCl). Reduction by sodium amalgam in THF generates the Ni(I) form of the F430 diepimer pentabutylamide. The visible and EPR spectra of this Ni(I) species are very similar to the corresponding spectra of Ni(I) F430M (Jaun, B. and Pfaltz, A. (1986) J. Chem. Soc. Chem. Commun. 1327-1329.).     

The nickel enzyme methyl-coenzyme M reductase from methanogenic archaea: in vitro interconversions among the EPR detectable MCR-red1 and MCR-red2 states

Methyl-coenzyme M reductase (MCR) catalyzes the formation of methane from methyl-coenzyme M and coenzyme B in methanogenic archaea. The enzyme contains tightly bound the nickel porphinoid F430. The nickel enzyme has been shown to be active only when its prosthetic group is in the Ni(I) reduced state. In this state MCR exhibits the nickel-based EPR signal red1. We report here for the MCR from Methanothermobacter marburgensis that the EPR spectrum of the active enzyme changed upon addition or removal of coenzyme M, methyl coenzyme M and/or coenzyme B. In the presence of methyl-coenzyme M the red1 signal showed a more resolved 14N-superhyperfine splitting than in the presence of coenzyme M indicating a possible axial ligation of the substrate to the Ni(I). In the presence of methyl-coenzyme M and coenzyme B the red1 signal was the same as in the presence of methyl-coenzyme M alone. However, in the presence of coenzyme M and coenzyme B a highly rhombic EPR signal, MCR-red2, was induced, which was found to be light sensitive and appeared to be formed at the expense of the MCR-red1 signal. Upon addition of methyl-coenzyme M, the red2 signal disappeared and the red1 signal increased again. The red2 signal of MCR with 61Ni-labeled cofactor was significantly broadened indicating that the signal is nickel or nickel-ligand based.     

Elucidating the Process of Activation of Methyl-Coenzyme M Reductase

Methyl-coenzyme M reductase (MCR) catalyzes the reversible reduction of methyl-coenzyme M (CH₃-S-CoM) and coenzyme B (HS-CoB) to methane and heterodisulfide CoM-S-S-CoB (HDS). MCR contains the hydroporphinoid nickel complex coenzyme F₄₃₀ in its active site, and the Ni center has to be in its Ni(I) valence state for the enzyme to be active. Until now, no in vitro method that fully converted the inactive MCR_silent-Ni(II) form to the active MCR_red1-Ni(I) form has been described. With the potential use of recombinant MCR in the production of biofuels and the need to better understand this enzyme and its activation process, we studied its activation under nonturnover conditions and achieved full MCR activation in the presence of dithiothreitol and protein components A2, an ATP carrier, and A3a. It was found that the presence of HDS promotes the inactivation of MCR_red1, which makes it essential that the activation process is isolated from the methane formation assay, which tends to result in minimal activation rates. Component A3a is a multienzyme complex that includes the mcrC gene product, an Fe-protein homolog, an iron-sulfur flavoprotein, and protein components involved in electron bifurcation. A hypothetical model for the cellular activation process of MCR is presented.     

Temperature dependence of methyl-coenzyme M reductase activity and of the formation of the methyl-coenzyme M reductase red2 state induced by coenzyme B

Methyl-coenzyme M reductase (MCR) catalyses the formation of methane from methyl-coenzyme M (CH₃-S-CoM) and coenzyme B (HS-CoB) in methanogenic archaea. The enzyme has an ₂₂₂ subunit structure forming two structurally interlinked active sites each with a molecule F₄₃₀ as a prosthetic group. The nickel porphinoid must be in the Ni(I) oxidation state for the enzyme to be active. The active enzyme exhibits an axial Ni(I)-based electron paramagnetic resonance (EPR) signal and a UV–vis spectrum with an absorption maximum at 385 nm. This state is called the MCR-red1 state. In the presence of coenzyme M (HS-CoM) and coenzyme B the MCR-red1 state is in part converted reversibly into the MCR-red2 state, which shows a rhombic Ni(I)-based EPR signal and a UV–vis spectrum with an absorption maximum at 420 nm. We report here for MCR from Methanothermobacter marburgensis that the MCR-red2 state is also induced by several coenzyme B analogues and that the degree of induction by coenzyme B is temperature-dependent. When the temperature was lowered below 20°C the percentage of MCR in the red2 state decreased and that in the red1 state increased. These changes with temperature were fully reversible. It was found that at most 50% of the enzyme was converted to the MCR-red2 state under all experimental conditions. These findings indicate that in the presence of both coenzyme M and coenzyme B only one of the two active sites of MCR can be in the red2 state (half-of-the-sites reactivity). On the basis of this interpretation a two-stroke engine mechanism for MCR is proposed.     

Substrate-analogue-induced changes in the nickel-EPR spectrum of active methyl-coenzyme-M reductase from Methanobacterium thermoautotrophicum.

Methyl-coenzyme-M reductase (MCR) catalyzes the formation of methane from methyl-coenzyme M [2-(methylthio)ethanesulfonate] and 7-mercaptoheptanoylthreonine phosphate in methanogenic archaea. The enzyme contains the nickel porphinoid coenzyme F430 as a prosthetic group. In the active, reduced (red) state, the enzyme displays two characteristic EPR signals, MCR-red1 and MCR-red2, probably derived from Ni(I). In the presence of the substrate methyl-coenzyme M, the rhombic MCR-red2 signal is quantitatively converted to the axial MCR-red1 signal. We report here on the effects of inhibitory substrate analogues on the EPR spectrum of the enzyme. 3-Bromopropanesulfonate (BrPrSO3), which is the most potent inhibitor of MCR known to date (apparent Ki = 0.05 microM), converted the EPR signals MCR-red1 and MCR-red2 to a novel axial Ni(I) signal designated MCR-BrPrSO3. 3-Fluoropropanesulfonate (apparent Ki < 50 microM) and 3-iodopropanesulfonate (apparent Ki < 1 microM) induced a signal identical to that induced by BrPrSO3 without affecting the line shape, despite the fact that the fluorine, bromine and iodine isotopes employed have nuclear spins of I = 1/2, I = 3/2 and I = 5/2, respectively. This finding suggests that MCR-BrPrSO3 is not the result of a close halogen-Ni(I) interaction. 7-Bromoheptanoylthreonine phosphate (BrHpoThrP) (apparent Ki = 5 microM), which is an inhibitory substrate analogue of 7-mercaptoheptanoylthreonine phosphate, converted the signals MCR-red1 and MCR-red2 to a novel axial Ni(I) signal, MCR-BrHpoThrP, similar but not identical to MCR-BrPrSO3. The results indicate that inhibition of MCR by the halogenated substrate analogues investigated above is not via oxidation of Ni(I)F430. The different MCR EPR signals are assigned to different enzyme/substrate and enzyme/inhibitor complexes.     

Probing the reactivity of Ni in the active site of methyl-coenzyme M reductase with substrate analogues

Methyl-coenzyme M reductase (MCR) catalyses the reduction of methyl-coenzyme M (CH₃-S-CoM) with coenzyme B (HS-CoB) to methane and CoM-S-S-CoB. It contains the nickel porphyrinoid F₄₃₀ as prosthetic group which has to be in the Ni(I) oxidation state for the enzyme to be active. The active enzyme exhibits an axial Ni(I)-derived EPR signal MCR-red1. We report here on experiments with methyl-coenzyme M analogues showing how they affect the activity and the MCR-red1 signal of MCR from Methanothermobacter marburgensis. Ethyl-coenzyme M was the only methyl-coenzyme M analogue tested that was used by MCR as a substrate. Ethyl-coenzyme M was reduced to ethane (apparent K _M=20 mM; apparent V _max=0.1 U/mg) with a catalytic efficiency of less than 1% of that of methyl-coenzyme M reduction to methane (apparent K _M=5 mM; apparent V _max=30 U/mg). Propyl-coenzyme M (apparent K _i=2 mM) and allyl-coenzyme M (apparent K _i=0.1 mM) were reversible inhibitors. 2-Bromoethanesulfonate ([I]_{0.5 V}=2 µM), cyano-coenzyme M ([I]_{0.5 V}=0.2 mM), 3-bromopropionate ([I]_{0.5 V}=3 mM), seleno-coenzyme M ([I]_{0.5 V}=6 mM) and trifluoromethyl-coenzyme M ([I]_{0.5 V}=6 mM) irreversibly inhibited the enzyme. In their presence the MRC-red1 signal was quenched, indicating the oxidation of Ni(I) to Ni(II). The rate of oxidation increased over 10-fold in the presence of coenzyme B, indicating that the Ni(I) reactivity was increased in the presence of coenzyme B. Enzyme inactivated in the presence of coenzyme B showed an isotropic signal characteristic of a radical that is spin coupled with one hydrogen nucleus. The coupling was also observed in D₂O. The signal was abolished upon exposure of the enzyme to O₂. 3-Bromopropanesulfonate ([I]_{0.5 V}=0.1 µM), 3-iodopropanesulfonate ([I]_{0.5 V}=1 µM), and 4-bromobutyrate also inactivated MCR. In their presence the EPR signal of MCR-red1 was converted into a Ni-based EPR signal MCR-BPS that resembles in line shape the MCR-ox1 signal. The signal was quenched by O₂. 2-Bromoethanesulfonate and 3-bromopropanesulfonate, which both rapidly reacted with Ni(I) of MRC-red1, did not react with the Ni of MCR-ox1 and MCR-BPS. The Ni-based EPR spectra of both inactive forms were not affected in the presence of high concentrations of these two potent inhibitors.     

Catalysis by methyl-coenzyme M reductase: a theoretical study for heterodisulfide product formation

Hybrid density functional theory has been used to investigate the catalytic mechanism of methyl-coenzyme M reductase (MCR), an essential enzyme in methanogenesis. In a previous study of methane formation, a scheme was suggested involving oxidation of Ni(I) in the starting square-planar coordination to the high-spin Ni(II) form in the CoM-S-Ni(II)F(430) octahedral intermediate. The methyl radical, concomitantly released by methyl-coenzyme M (CoM), is rapidly quenched by hydrogen atom transfer from the coenzyme B (CoB) thiol group, yielding methane as the first product of the reaction. The present investigation primarily concerns the second and final step of the reaction: oxidation of CoB and CoM to the CoB-S-S-CoM heterodisulfide product and reduction of nickel back to the Ni(I) square-planar form. The activation energy for the second step is found to be around 10 kcal/mol, implying that the first step of methane formation with an activation energy of 20 kcal/mol should be rate-limiting. An oxygen of the Gln147 residue, occupying the rear axial position in the oxidized Ni(II) state, is shown to stabilize the intermediate by 6 kcal/mol, thereby slightly decreasing the barrier for the preceding rate-limiting transition state. The mechanism suggested is discussed in the context of available experimental data. An analysis of the flexibility of the F(430) cofactor during the reaction cycle is also given.     

Cellular levels of factor 390 and methanogenic enzymes during growth of Methanobacterium thermoautotrophicum deltaH.

Methanobacterium thermoautotrophicum deltaH was grown in a fed-batch fermentor and in a chemostat under a variety of 80% hydrogen-20% CO2 gassing regimes. During growth or after the establishment of steady-state conditions, the cells were analyzed for the content of adenylylated coenzyme F420 (factor F390-A) and other methanogenic cofactors. In addition, cells collected from the chemostat were measured for methyl coenzyme M reductase isoenzyme (MCR I and MCR II) content as well as for specific activities of coenzyme F420-dependent and H2-dependent methylenetetrahydromethanopterin dehydrogenase (F420-MDH and H2-MDH, respectively), total (viologen-reducing) and coenzyme F420-reducing hydrogenase (FRH), factor F390 synthetase, and factor F390 hydrolase. The experiments were performed to investigate how the intracellular F390 concentrations changed with the growth conditions used and how the variations were related to changes in levels of enzymes that are known to be differentially expressed. The levels of factor F390 varied in a way that is consistently understood from the biochemical mechanisms underlying its synthesis and degradation. Moreover, a remarkable correlation was observed between expression levels of MCR I and II, F420-MDH, and H2-MDH and the cellular contents of the factor. These results suggest that factor F390 is a reporter compound for hydrogen limitation and may act as a response regulator of methanogenic metabolism.     

Characterization of the thioether product formed from the thiolytic cleavage of the alkyl-nickel bond in methyl-coenzyme M reductase

Methyl-coenzyme M reductase (MCR) catalyzes the terminal step in methanogenesis by using N-7-mercaptoheptanolyl-threonine phosphate (CoBSH) as the two-electron donor to reduce 2-(methylthiol)ethane sulfonate (methyl-SCoM) to methane, and producing the heterodisulfide, CoBS-SCoM. The active site of MCR includes a noncovalently bound Ni tetrapyrrolic cofactor called coenzyme F430, which is in the Ni(I) state in the active enzyme (MCRred1). Bromopropanesulfonate (BPS) is a potent inhibitor and reversible redox inactivator that reacts with MCRred1 to form an EPR-active state called MCRPS, which is an alkyl-nickel species. When MCRPS is treated with free thiol containing compounds, the enzyme is reconverted to the active MCRred1 state. In this paper, we demonstrate that the reactivation of MCRPS to MCRred1 by thiols involves formation of a thioether product. MCRPS also can be converted to active MCRred1 by treatment with sodium borohydride. Reactivation is highest with the smallest free thiol HS-. Interestingly, MCRPS can also be reductively activated with analogues of CoBSH such as CoB8SH and CoB9SH, but not CoBSH itself. Unambiguous demonstration of the formation of a methylthioether product from thiolysis of an alkyl-Ni species provides support for a methyl-Ni intermediate in the MCR-catalyzed last step in methanogenesis and the first proposed step in anaerobic methane oxidation.     

Deconstructing F430: quantum chemical perspectives of biological methanogenesis

What stabilizes the unique Ni(I) state of the active form of coenzyme F(430) and of methylcoenzyme M reductase, the enzyme responsible for the last methane-evolving step of biological methanogenesis? A survey of F(430) model compounds suggests that the monoanionic nature of the F(430) ligand goes a long way toward explaining the stability of Ni(I) F(430). Second, nature appears to have manipulated the stereochemistry of the macrocycle, particularly that of the 12- and 13- substituents, so that the cofactor is sterically constrained against ruffling and forced to adopt a relatively planar conformation with long Ni--N distances. Third, the carbonyl substituent at the 15-meso position electronically stabilizes the Ni(I) state of the cofactor. With regard to the mechanism of methylcoenzyme M reductase, the most reasonable mechanism, in our opinion, involves a Ni(I)-mediated homolytic cleavage of the S--CH(3) bond in methylcoenzyme M, followed immediately by the quenching of the methyl radical by coenzyme B (a thiol) to produce methane.     

Two sub-states of the red2 state of methyl-coenzyme M reductase revealed by high-field EPR spectroscopy

Methyl-coenzyme M reductase (MCR) catalyzes the formation of methane from methyl-coenzyme M and coenzyme B in methanogenic archaea. The enzyme has two structurally interlinked active sites embedded in an α₂β₂γ₂ subunit structure. Each active site has the nickel porphyrinoid F₄₃₀ as a prosthetic group. In the active state, F₄₃₀ contains the transition metal in the Ni(I) oxidation state. The active enzyme exhibits an axial Ni(I)-based continuous wave (CW) electron paramagnetic resonance (EPR) signal, called red1a in the absence of substrates or red1c in the presence of coenzyme M. Addition of coenzyme B to the MCR-red1 state can partially and reversibly convert it into the MCR-red2 form, which shows a rhombic Ni(I)-based EPR signal (at X-band microwave frequencies of approximately 9.4 GHz). In this report we present evidence from high-field/high-frequency CW EPR spectroscopy (W-band, microwave frequency of approximately 94 GHz) that the red2 state consists of two substates that could not be resolved by EPR spectroscopy at X-band frequencies. At W-band it becomes apparent that upon addition of coenzyme B to MCR in the red1c state, two red2 EPR signals are induced, not one as was previously believed. The first signal is the well-characterized (ortho)rhombic EPR signal, thus far called red2, while the second previously unidentified signal is axial. We have named the two substates MCR-red2r and MCR-red2a after their rhombic and axial signals, respectively. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.