Proocytocin/neurophysin convertase from bovine neurohypophysis and corpus luteum secretory granules: complete purification, structure-function relationships, and competitive inhibitor

Structure-function relationship studies were conducted on the proocytocin/neurophysin endoprotease previously characterized in both bovine neurohypophyseal and corpus luteum granules, using as a reference substrate a synthetic peptide reproducing the entire (1-20) NH2-terminal domain of the precursor. The [D-Arg12] derivative of proocytocin/neurophysin (1-20) was found to be a good competitive inhibitor of the enzyme (Ki = 30 microM), while the [D-Lys11] derivative was not. This allowed the complete purification of two isoforms of the endoprotease (Mr 58,000 and 52,000, respectively) by affinity chromatography using covalently immobilized [D-Arg12] proocytocin/neurophysin (1-20) as the affinity adsorbent. The use of selectively modified or truncated forms of the reference substrate or of the [D-Arg12] competitive inhibitor of the endoprotease established clearly that this basic pair specific convertase is sensitive to modification of the substrate structure either at the basic residues of the cleavage locus or at amino acids around this site (i.e., Pro7 and Gly9). It is concluded that longer distance interactions between amino acids situated on both the NH2 and COOH sides of the basic doublet Lys11Arg12 may contribute to the stabilization of a preferred substrate conformation allowing recognition by the enzyme subsites.     

Processing endoprotease recognizes a structural feature at the cleavage site of peptide prohormones. The pro-ocytocin/neurophysin model

Pro-ocytocin/neurophysin convertase is a divalent cation-dependent endoprotease isolated from both bovine corpus luteum and neurohypophyseal secretory granules. The putative pro-ocytocin/neurophysin converting enzyme cleaves the Arg12-Ala13 bonds of both pro-ocytocin/neurophysin (1----20) and pro-ocytocin/neurophysin obtained by hemisynthesis. The minimal efficient substrate structure allowing recognition by this processing endoprotease was defined by measuring its cleavage efficiency and the inhibitory properties of a set of 34 selectively modified derivatives of the (1----20) NH2-terminal domain of the ocytocin/neurophysin precursor. The data demonstrate that: (i) the basic Lys11-Arg12 doublet, although necessary, is not sufficient; (ii) a minimal substrate length of nine amino acids (residues 7-15 or 8-16) is essential; (iii) those amino acids around the Lys-Arg doublet which contribute to the formation of a possible beta-turn-alpha-helix secondary structure are critical; (iv) substrate recognition by the enzyme may involve several subsites in which structural determinants, situated on both sides of the basic doublet, participate; (v) the NH2-terminal sequence of neurophysin plays a critical role in the correct reading of the cleavage sequence by the processing endoprotease. It is proposed, first, that this type of structural feature may constitute the basis of a general coding system for endoproteases involved in the processing of polypeptide hormone precursors; second, that in addition to its role in the intragranular packaging of the nonapeptide hormone, neurophysin plays a key role in the correct processing of its common precursor with ocytocin.     

Sequence requirements for precursor cleavage within the constitutive secretory pathway.

We have recently demonstrated that the Arg-X-Lys/Arg-Arg sequence is a signal for precursor cleavage catalyzed by furin, a mammalian homologue of the yeast precursor-processing endoprotease Kex2, within the constitutive secretory pathway. In this study, we further examined sequence requirements for the constitutive precursor cleavage by expression of various prorenin mutants with amino acid substitutions around the native Lys-Arg cleavage site in Chinese hamster ovary cells. The results delineate the following sequence rules that govern the constitutive precursor cleavage. (a) A basic residue (Lys or Arg) at the 4th (position -4) or 6th (position -6) residue upstream of the cleavage site besides basic residues at positions -1 and -2 is necessary. (b) At position -2, a Lys residue is more preferable than Arg. (c) At position -4, an Arg residue is more preferable than Lys. (d) At position 1, a hydrophobic aliphatic amino acid is not suitable.     

An endopeptidase associated with bovine neurohypophysis secretory granules cleaves pro-ocytocin/neurophysin peptide at paired basic residues

The octacosapeptide sequence [Tyr18] pro-ocytocin/neurophysin (1-18)NH2 [pro-OT/Np(1-18)NH2] was synthesized and used as substrate to detect endoprotease(s) possibly involved in the processing of this precursor in bovine hypothalamo-neurohypophyseal tract. An endopeptidase (58 Kda) was detected in Lysates made from highly purified neurosecretory granules. This protease which cleaves the peptide bond on the carboxyl side of the Lys-Arg doublet, and no single basic residue, generates both OT-Gly10-Lys11-Arg12+Ala13-Val-Leu-Asp-Leu-Tyr18 (NH2) from the octacosapeptide substrate. In addition, a carboxypeptidase B-like activity converting OT-Gly10-Lys11-Arg12 into OT-Gly10 was detected in the same granule Lysates. It is hypothesized that a combination of these endoprotease and carboxypeptidase B-like activities together with the amidating enzyme of secretory granules might participate in the cleavage and processing of pro-OT/Np in vivo.     

Enzymes that process somatostatin precursors. A novel endoprotease that cleaves before the arginine-lysine doublet is involved in somatostatin-28 convertase activity of rat brain cortex

The selective processing activity which generates both the NH2- and COOH-terminal fragments of the octacosapeptide somatostatin-28 (S-28) was investigated. Separation into two distinct proteolytic activities was achieved by ion-exchange chromatography. An endoprotease cleaving either the substrate Pro-Arg-Glu-Arg-Lys-Ala-Gly-Ala-Lys-Asn-Tyr-NH2, i.e. [Ala17,Tyr20]S-28-(10-20)-NH2 (peptide I), or the octacosapeptide somatostatin-28, on the NH2 side of the Arg-Lys doublet was separated from an aminopeptidase B-like activity. Whereas the endoprotease cleaves a single peptide bond, between Glu12 and Arg13 of S-28, the aminopeptidase B-like enzyme removes both Arg13 and Lys14 stepwise from the NH2 terminus of the corresponding COOH-terminal fragment. This endoprotease activity peaks around pH 8.5, whereas the optimal aminopeptidase B-like activity is in the pH range 6.2-8.5. Combination of both enzymes resulted in the recovery of the overall S-28 convertase activity with an optimal pH at 7. In addition, this endoprotease appears to be very sensitive to divalent cations since it is strongly inhibited by chelating agents. The use of selectively modified undecapeptides derived from the reference substrate peptide I by a single modification of the amino acids Glu12, Arg13, and Lys14 at the cleavage locus showed that both basic residues are critically important, whereas Glu12 is not. It is proposed that S-28 processing involves a divalent cation-sensitive endoprotease that is sensitive to thiol reagents, which cleaves before the Arg-Lys doublet, which is not trypsin-like, and whose action is coupled to an aminopeptidase B-like enzyme.     

Somatostatin-28 and pro-ocytocin/neurophysin convertases: basic pair selective endoproteases involved in pro-hormone processing in the rat brain cortex and bovine corpus luteum

Two neuropeptide precursor processing enzyme systems were characterized in the rat brain cortex and bovine neurohypophysis and corpus luteum. The first one combines the action of a 90 kDa endoprotease which cleaves somatostatin-28 before the Arg-Lys doublet and that of an aminopeptidase B-like enzyme. The second system associates the action of a 58 kDa endoprotease cleaving pro-ocytocin/neurophysin (1-20) after the Lys-Arg dibasic moiety and a carboxypeptidase B-like activity. Both systems appear to be located in membrane-limited secretory vesicles of the producing organs, and to exhibit the properties of metallo-enzymes sensitive to divalent cation chelators. In contrast, they do not show the characteristics of serine-proteases and of trypsin-like enzymes. Studies with substrate analogs selectively modified at the basic doublet indicated that the integrity of both basic amino acids is essential but that conformational parameters, probably governed by the amino acid sequences flanking the basic doublet, play an important role. These data will be discussed in relation to a hypothesis on the predicted preferred secondary structure of these restriction loci.     

Consensus sequence for precursor processing at mono-arginyl sites. Evidence for the involvement of a Kex2-like endoprotease in precursor cleavages at both dibasic and mono-arginyl sites.

Many peptide hormones and neuropeptides are produced from larger, inactive precursors through endoproteolysis at sites usually marked by paired basic residues (primarily Lys-Arg and Arg-Arg), or occasionally by a monobasic residue (primarily Arg). Based upon data concerning processing of prorenin and its mutants around the native Lys-Arg cleavage site expressed in mouse pituitary AtT-20 cells, we present the following sequence rules that govern mono-arginyl cleavages: (a) a basic residue at the fourth (position -4) or the sixth (position -6) residue upstream of the cleavage site is required, (b) at position -4, Arg is more favorable than Lys, and (c) at position 1, a hydrophobic aliphatic residue is not suitable. These rules are compatible with those proposed by comparison of precursor sequences around mono-arginyl cleavage sites. We also provide evidence that precursor cleavages at mono-arginyl and dibasic sites can be catalyzed by the same Kex2-like processing endoprotease, PC1/PC3.     

Purification and characterization of a putative proenkephalin cleaving enzyme.

A putative proenkephalin-cleaving enzyme (PCE) extracted from bovine adrenal chromaffin granules was purified with soybean trypsin inhibitor high-performance affinity chromatography. The 12,600-fold purified enzyme was maximally active at pH 8.0. The enzyme was completely inhibited with lima bean trypsin inhibitor (0.1 mg/ml), soybean trypsin inhibitor (0.1 mg/ml), and p-(chloromercuri)benzenesulfonic acid (1.0 mM), indicating PCE is a serine protease with cysteine residues likely to be involved in its structure or activity. It exhibited significant autoproteolysis without specific substrates present. The substrate specificity and kinetic constants with the enkephalin-containing (EC) peptides Leu-9 and proenkephalin Peptides B, E, and F as substrates were studied. The cleavage patterns were substantially different than with trypsin digestion. PCE specifically recognized the paired basic amino acid residues and predominantly cleaved the peptide bonds between Lys and Arg sites and peptide bonds after Lys-Lys and Arg-Arg sites. Different Km and Vmax values for the different Lys-Arg sites indicate sequences in addition to the paired basic residues can affect enzyme activity. Also, the lower Km and Vmax of Peptide E suggest a higher affinity for this peptide but much slower cleavage. The C-terminally located Lys-Arg site appears responsible for this high affinity. Based on these observations, we propose the following: (a) the primary structure of these peptides contains enough information to be processed correctly by PCE and (b) PCE may be regulated by pH and Peptide E to prevent extensive processing of the intermediate EC peptides which are the major opioid peptides found in the adrenal chromaffin granules.     

Molecular analysis of dibasic endoproteolytic cleavage signals.

Biologically active peptide hormones are synthesized from larger precursor proteins by a variety of post-translational processing reactions. To characterize these processing reactions further we have expressed preprogastrin in two endocrine cell lines and examined the molecular determinants involved in endoproteolysis at dibasic cleavage sites. The Gly93-Arg94-Arg95 carboxyl-terminal processing site of progastrin must be processed sequentially by an endoprotease, a carboxypeptidase, and an amidating enzyme to produce bioactive gastrin. For these studies the dibasic Arg94-Arg95 residues that serve as signals for the initiation of this processing cascade were mutated to Lys94-Arg95, Arg94-Lys95, and Lys94-Lys95. In the GH3 cells the Lys94-Arg95 mutation slightly diminished synthesis of carboxyl-terminally amidated gastrin, whereas in the MTC 6-23 cells this mutation had no effect on amidated gastrin synthesis. In contrast, both Arg94-Lys95 and Lys94-Lys95 mutations resulted in significantly diminished production of amidated gastrin in both cell lines. A specific hierarchy of preferred cleavage signals at this progastrin processing site was demonstrated in both cell lines, indicating that cellular dibasic endoproteases have stringent substrate specificities. Progastrins with the Lys94-Arg95 mutation in GH3 cells also demonstrated diminished processing at the Lys74-Lys75 dibasic site, thus single amino acid changes at one processing site may alter cleavage at distant sites. These studies provide insight into the post-translational processing and biological activation of not only gastrin but other peptide hormones as well.     

Utilization of Escherichia coli outer-membrane endoprotease OmpT variants as processing enzymes for production of peptides from designer fusion proteins

Escherichia coli outer-membrane endoprotease OmpT has suitable properties for processing fusion proteins to produce peptides and proteins. However, utilization of this protease for such production has been restricted due to its generally low cleavage efficiency at Arg (or Lys)-Xaa, where Xaa is a nonbasic N-terminal amino acid of a target polypeptide. The objective of this study was to generate a specific and efficient OmpT protease and to utilize it as a processing enzyme for producing various peptides and proteins by converting its substrate specificity. Since OmpT Asp(97) is proposed to interact with the P1' amino acid of its substrates, OmpT variants with variations at Asp(97) were constructed by replacing this amino acid with 19 natural amino acids to alter the cleavage specificity at Arg (P1)-Xaa (P1'). The variant OmpT that had a methionine at this position, but not the wild-type OmpT, efficiently cleaved a fusion protein containing the amino acid sequence -Arg-Arg-Arg-Ala-Arg downward arrow motilin, in which motilin is a model peptide with a phenylalanine at the N terminus. The OmpT variants with leucine and histidine at position 97 were useful in releasing human adrenocorticotropic hormone (1-24) (serine at the N terminus) and human calcitonin precursor (cysteine at the N terminus), respectively, from fusion proteins. Motilin was produced by this method and was purified up to 99.0% by two chromatographic steps; the yield was 160 mg/liter of culture. Our novel method in which the OmpT variants are used could be employed for production of various peptides and proteins.     

Effect of neurophysin on enzymatic maturation of oxytocin from its precursor

We examined the extent to which rates of enzymatic conversion of the oxytocin biosynthetic precursor to mature peptide are modulated by intramolecular and intermolecular assembly of precursor and polypeptide intermediates. The biosynthesized precursor contains hormone and neurophysin sequences linked by a Gly-Lys-Arg sequence and undergoes enzymatic processing reactions which include endoproteolytic cleavage at the Lys-Arg dibasic sequence, carboxypeptidase B-like exoproteolytic cleavage, and enzymatic amidation. We evaluated the effect of neurophysin on such processing reactions using semisynthetic precursors of oxytocin/bovine neurophysin I and synthetic oxytocinyl precursor intermediates as substrates. Neurophysin I at high concentration (0.7 mM) reduced the rates of carboxy-peptidase B-like conversion of oxytocinyl-Gly-Lys-Arg to oxytocinyl-Gly and the enzymatic amidation of oxytocinyl-Gly to mature (C-terminal amidated) oxytocin. The dependence of rate suppression on the concentrations of peptide substrate and neurophysin I suggested that suppression is due to intermolecular formation of hormone-neurophysin complexes which are aggregated at least to dimers. An analogous intramolecular neurophysin effect was found for endoproteolytic processing of semisynthetic precursors. Endoproteinase Lys-C cleaved the Lys11-Arg12 peptide bond in a native-like semisynthetic precursor at a significantly slower rate than it did an assembly-deficient precursor analogue. The difference in semisynthetic precursor endoproteolysis rates is most substantial at the high concentrations at which the native-like precursor would form dimers but the assembly-deficient analogue would not. The native-like semisynthetic precursor was more stable than the assembly-deficient precursor analogue to tryptic digestion. The concentration-dependent effects of neurophysin, both intramolecularly as a precursor domain and intermolecularly as an interacting protein, are likely to occur in the secretory granules in which the biosynthetic precursors are packaged. The molecular organization of both hormone/neurophysin precursors and the noncovalently complexed hormone-neurophysin intermediates can be expected to play a role in modulating enzymatic processing reactions that lead to mature neurohypophysial hormones.     

Utilization of Escherichia coli Outer-Membrane Endoprotease OmpT Variants as Processing Enzymes for Production of Peptides from Designer Fusion Proteins

Escherichia coli outer-membrane endoprotease OmpT has suitable properties for processing fusion proteins to produce peptides and proteins. However, utilization of this protease for such production has been restricted due to its generally low cleavage efficiency at Arg (or Lys)-Xaa, where Xaa is a nonbasic N-terminal amino acid of a target polypeptide. The objective of this study was to generate a specific and efficient OmpT protease and to utilize it as a processing enzyme for producing various peptides and proteins by converting its substrate specificity. Since OmpT Asp⁹⁷ is proposed to interact with the P1′ amino acid of its substrates, OmpT variants with variations at Asp⁹⁷ were constructed by replacing this amino acid with 19 natural amino acids to alter the cleavage specificity at Arg (P1)-Xaa (P1′). The variant OmpT that had a methionine at this position, but not the wild-type OmpT, efficiently cleaved a fusion protein containing the amino acid sequence -Arg-Arg-Arg-Ala-Arg↓motilin, in which motilin is a model peptide with a phenylalanine at the N terminus. The OmpT variants with leucine and histidine at position 97 were useful in releasing human adrenocorticotropic hormone (1-24) (serine at the N terminus) and human calcitonin precursor (cysteine at the N terminus), respectively, from fusion proteins. Motilin was produced by this method and was purified up to 99.0% by two chromatographic steps; the yield was 160 mg/liter of culture. Our novel method in which the OmpT variants are used could be employed for production of various peptides and proteins.     

Molecular properties of the oxytocin/bovine neurophysin biosynthetic precursor. Studies using a semisynthetic precursor

An oxytocin/bovine neurophysin I biosynthetic precursor, [N epsilon-diacetimidyl-30,71, des-His106]pro-OT/BNPI, was synthesized from a synthetic oxytocinyl peptide, 1/2Cys-Tyr-Ile-Gln-Asn-1/2Cys-Pro-Leu-Gly-Gly-Lys-Arg, and native neurophysin by chemical semisynthesis. The semisynthetic precursor contains the entire sequence of the biosynthetic precursor deduced from the complementary DNA structure except for omission of the carboxyl-terminal histidine residue. The covalent structure of the semisynthetic product was verified by amino acid analysis and amino-terminal analysis. Analytical affinity chromatography was employed to evaluate noncovalent binding properties of the precursor. The precursor does not bind significantly to immobilized Met-Tyr-Phe, a hormone binding site ligand. In contrast, the acetimidated precursor binds to immobilized bovine neurophysin II, with a 13-fold higher affinity than does acetimidated neurophysin itself. When a hormonal ligand, [Lys8]vasopressin, was added to the elution buffer at the concentration of 0.1 mM so that a major portion of the immobilized BNPII was liganded, the affinity between the immobilized liganded BNPII and the precursor was enhanced 8-fold and approached the affinity for the liganded (bovine neurophysin I-immobilized BNPII) interaction. The data imply that the precursor can self-associate and that this self-association is closely related to that of liganded neurophysin. The tripeptide affinity matrix data argue that, in the precursor, the ligand binding site of the neurophysin domain is occupied intramolecularly by the hormone domain. The data verify the view that both the self-association surface and hormone binding site are established upon precursor folding. A disulfide stability analysis showed the resistance, to disulfide interchange by dithiothreitol, of semisynthetic precursor but not of neurophysin, as judged by protein association and peptide ligand binding activities, respectively. The results argue that the molecular structure of the precursor is established upon precursor folding and before enzymatic processing that produces mature hormone and neurophysin.     

Favourable side-chain orientation of cleavage site dibasic residues of prohormone in proteolytic processing by prohormone convertase 1/3.

Previous studies using selectively modified pro-ocytocin/neurophysin substrate analogues and the purified metalloprotease, pro-ocytocin/neurophysin convertase (magnolysin; EC 3.4 24.62), have shown that dibasic cleavage site processing is associated with a prohormone sequence organized in a beta-turn structure. We have used various peptide analogues of the pro-ocytocin-neurophysin processing domain, and recombinant prohormone convertase 1/3, to test the validity of this property towards this member of the family of prohormone convertases (PCs). The enzymatic cleavage analysis and kinetics showed that: (a) with methyl amide (N-Met) modification, a secondary structure beta-turn breaker, the enzyme substrate interaction was abolished; (b) cleavage was favoured when the dibasic substrate side-chains were oriented in opposite directions; (c) the amino acid present at the P'1 position is important in the enzyme-substrate interaction; (d) the flexibility of the peptide substrate is necessary for the interaction; (e) Addition of dimethylsulfoxide to the cleavage assay favoured the cleavage of the pro-ocytocin/neurophysin large substrate over that of the smaller one pGlu-Arg-Thr-Lys-Arg-methyl coumarin amide. These data allowed us to conclude that proteolytic processing of pro-ocytocin-related peptide substrates by PC1/3 as well as by the metalloenzyme, magnolysin, involves selective recognition of precise cleavage site local secondary structure by the processing enzyme. It is hypothesized that this may represent a general property of peptide precursor proteolytic processing systems.     

Functional profiling of recombinant NS3 proteases from all four serotypes of dengue virus using tetrapeptide and octapeptide substrate libraries

Regulated proteolysis by the two-component NS2B/NS3 protease of dengue virus is essential for virus replication and the maturation of infectious virions. The functional similarity between the NS2B/NS3 proteases from the four genetically and antigenically distinct serotypes was addressed by characterizing the differences in their substrate specificity using tetrapeptide and octapeptide libraries in a positional scanning format, each containing 130,321 substrates. The proteases from different serotypes were shown to be functionally homologous based on the similarity of their substrate cleavage preferences. A strong preference for basic amino acid residues (Arg/Lys) at the P1 positions was observed, whereas the preferences for the P2-4 sites were in the order of Arg > Thr > Gln/Asn/Lys for P2, Lys > Arg > Asn for P3, and Nle > Leu > Lys > Xaa for P4. The prime site substrate specificity was for small and polar amino acids in P1' and P3'. In contrast, the P2' and P4' substrate positions showed minimal activity. The influence of the P2 and P3 amino acids on ground state binding and the P4 position for transition state stabilization was identified through single substrate kinetics with optimal and suboptimal substrate sequences. The specificities observed for dengue NS2B/NS3 have features in common with the physiological cleavage sites in the dengue polyprotein; however, all sites reveal previously unrecognized suboptimal sequences.     

Dichain structure of botulinum neurotoxin: identification of cleavage sites in types C, D, and F neurotoxin molecules

Botulinum neurotoxin (NT) is synthesized by Clostridium botulinum as about a 150-kDa single-chain polypeptide. Posttranslational modification by bacterial or exogenous proteases yielded dichain structure which formed a disulfide loop connecting a 50-kDa light chain (Lc) and 100-kDa heavy chain (Hc). We determined amino acid sequences around cleavage sites in the loop region of botulinum NTs produced by type C strain Stockholm, type D strain CB16, and type F strain Oslo by analysis of the C-terminal sequence of Lc and the N-terminal sequence of Hc. Cleavage was found at one or two sites at Arg444/Ser445 and Lys449/Thr450 for type C, and Lys442/Asn443 and Arg445/Asp446 for type D, respectively. In culture fluid of mildly proteolytic strains of type C and D, therefore, NT exists as a mixture of at least three forms of nicked dichain molecules. The NT of type F proteolytic strain Oslo showed the Arg435 as a C-terminal residue of Lc and Ala440 as an N-terminal residue of Hc, indicating that the bacterial protease cuts twice (Arg435/Lys436 and Lys439/Ala440), with excision of four amino acid residues. The location of cleavage and number of amino acid residue excisions in the loop region could be explained by the degree of exposure of amino acid residues on the surface of the molecule, which was predicted as surface probability from the amino acid sequence. In addition, the observed correlation may also be adapted to the cleavage sites of the other botulinum toxin types, A, B, E, and G.     

Sequence requirements for prohormone processing in mouse pituitary AtT-20 cells. Analysis using prorenins as model substrates

Although cleavage of peptides at sites marked by paired basic amino acids is a common feature of prohormone processing, little is known about the properties of endoprotease(s) responsible for cleavage of the precursor. To examine the cleavage specificity of a processing endoprotease, we have altered the Lys-Arg cleavage site of human prorenin to Arg-Arg, Lys-Lys and Arg-Lys by site-directed mutagenesis, and expressed the native and mutated precursors in mouse pituitary AtT-20 cells which are known to process foreign prohormones, including prorenin, at paired basic sites during the regulated secretory process. All native and mutated human prorenins were sorted into the regulated secretory pathway. The mutated precursor with Arg-Arg instead of the Lys-Arg native pair was processed at about half the efficiency of the native one, while the Lys-Lys and Arg-Lys mutants were not processed. Rat prorenin, which naturally has a Lys-Lys pair, was not processed in the cells. In addition, mouse Ren2 prorenin, which has a Ser residue next to the Lys-Arg pair, but not mouse Ren1 prorenin, which has a Pro residue next to the pair, was processed. These results suggest that the Arg residue at the COOH side of the basic pair is essential for cleavage of prorenins by a processing enzyme during the regulated secretory process in AtT-20 cells, although the NH2-side Lys residue also plays a role. The results also demonstrate that the processing enzyme cannot cleave the Arg-Pro peptide bond.     

Purification and characterization of the yeast glycosylphosphatidylinositol-anchored, monobasic-specific aspartyl protease yapsin 2 (Mkc7p).

The Saccharomyces cerevisiae YPS2 (formerly MKC7) gene product is a glycosylphosphatidylinositol-linked aspartyl protease that functions as a yeast secretase. Here, the glycosylphosphatidylinositol-linked form of yapsin 2 (Mkc7p) was purified to homogeneity from the membrane fraction of an overexpressing yeast strain. Purified yapsin 2 migrated diffusely in SDS-polyacrylamide gel electrophoresis (molecular mass approximately 200 kDa), suggesting extensive, heterogeneous glycosylation. Studies using internally quenched fluorogenic peptide substrates revealed cleavage by the enzyme carboxyl to Lys or Arg. No cleavage was seen when both Lys and Arg were absent. No significant enhancement was seen with multiple basic residues. However, cleavage always occurred carboxyl to the most COOH-terminal basic residue. V(max)/K(m) was insensitive to P(2) and P(3) residues except that Pro at P(2) blocked cleavage entirely. These results suggest that yapsin 2 is a monobasic amino acid-specific protease that requires a basic residue at P(1) and excludes basic residues from P(1)'. The pH dependence of V(max)/K(m) for a substrate containing a pro-alpha factor cleavage site was bell-shaped, with a maximum near pH 4.0. However, V(max)/K(m) for a substrate mimicking the alpha-secretase site in human beta amyloid precursor protein was optimal near pH 6.0, consistent with cleavage of beta amyloid precursor protein by yapsin 2 when expressed in yeast.     

Substrate specificity at the P1' site of Escherichia coli OmpT under denaturing conditions

Though OmpT has been reported to mainly cleave the peptide bond between consecutive basic amino acids, we identified more precise substrate specificity by using a series of modified substrates, termed PRX fusion proteins, consisting of 184 residues. The cleavage site of the substrate PRR was Arg140-Arg141 and the modified substrates PRX substituted all 19 natural amino acids at the P1' site instead of Arg141. OmpT under denaturing conditions (in the presence of 4 M urea) cleaved not only between two consecutive basic amino acids but also at the carboxyl side of Arg140 except for the Arg140-Asp141, -Glu141, and -Pro141 pairs. In addition to Arg140 at the P1 site, similar results were obtained when Lys140 was substituted into the P1 site. In the absence of urea, an aspartic acid residue at the P1' site was unfavorable for OmpT cleavage of synthetic decapeptides, the enzyme showed a preference for a dibasic site.