Synthesis and conformational study of poly(N delta-carbobenzoxy, N delta-benzyl-L-ornithine) and poly(N delta-benzyl-L-ornithine)

Poly(N^δ-carbobenzoxy, N^δ-benzyl-L -ornithine) (PCBLO) was prepared by the standard NCA method. PCBLO was converted into poly(N^δ-benzyl-L -ornithine) (PBLO) through decarbobenzoxylation with hydrogen bromide. The monomer N^δ-benzyl-L -ornithine was synthesized by reacting L -ornithine with benzaldehyde, followed by hydrogenation. The conformation of the two polypeptides was studied by optical rotatory dispersion and circular dichroism. PCBLO forms a right-handed helix in helix-promoting solvents. In mixed solvents of chloroform and dichloroacetic acid (DCA) it undergoes a sharp helix–coil transition at 12% (v/v) DCA at 25°C, as compared with 36% for poly(N^δ-carbobenzoxy-L -ornithine) (PCLO). Like PCLO, the helix–coil transition is “inverse,” that is, high temperature favors the helical form. PBLO is soluble in water at pH below 7 and has a “coiled” conformation. In 88% (v/v) 1-propanol above pH (apparent) 9.6 it is completely helical. In 50% 1-propanol the transition pH (apparent) is about 7.4; this compares with a pH_tr of about 10 for poly-L -ornithine in the same solvent.     

Side-chain effect on conformation of ionizable polypeptides in aqueous solution

In order to study the effect of side-chain length on the conformation of polypeptides, conformational changes of various ionic polypeptides with various lengths of side chain, poly-N^ε-glutaryl-L -lysine (PGL), poly-N^δ-glutaryl-L -ornithine (PGO), poly-N^ε-succinyl-L -lysine (PSL), and poly-N^δ-succinyl-L -ornithine (PGO), were investigated by ORD, potentiometric titration, and dilatometric measurements in aqueous solution. The results of optical rotation and potentiometric titration measurements indicate strongly that the α-helix stability increases in the sequence PSO < PSL ～ PGO < PGL, which corresponds to increased side-chain length. The volume change associated with the helix–coil transition also increased in the above sequence. This series of polymers seems to be more hydrophobic compared with poly-L -glutamic acid or poly-L -lysine, as suggested from the values of enthalpy and entropy changes for coil–helix transitions.     

Interaction between chondroitin-6-sulfate and poly-L-arginine in aqueous solution

The interactions between chondroitin-6-sulfate and poly-L -arginine in aqueous salt solution have been investigated by circular dichroism techniques. In the presence of chondroitin-6-sulfate, at neutral pH, poly-L -arginine adopts the α-helical conformation rather than “charged coil” form observed in the absence of mucopolysaccharide. This interaction is at a maximum when the ratio of arginine to disaccharide residues is 2:1. Elevation of the temperature leads to a sharp melting transition at 76.0 ± 1.0°C. This behavior is in marked contrast to that for poly-L -lysine-chondroitin-6-sulfate interactions, which are at a maximum at a 1:1 residue ratio and have a melting transition at 47.0 ± 1.0°C. These results indicate a stronger interaction for poly-L -arginine than for poly-L -lysine. The positive arginine side chains appear to interact with both the negative sulfate and carboxyl residues, while those of the lysines are involved only with the sulfates. Poly-L -ornithine at neutral pH shows no conformation directing interaction with chondroitin-6-sulfate, although a small proportion of α-helix is formed on dilution of the mixture with methanol. The extent of the interaction of cationic polypeptides with chondroitin-6-sulfate increases in the order poly-L -ornithine, poly-L -lysine, poly-L -arginine, i.e., in the order of increasing side-chain length.     

The effect of neutral salts on the conformational transition of poly-alpha-amino acids. I. Potentiometric titration and optical rotatory dispersion studies

The effect of salts on the coil-to-helix transition of poly-α-amino acids was investigated by optical rotatory dispersion and potentiometric titration techniques. Both charge-dependent and charge-independent contributions to the free energy were considered. The free energy of formation ΔF° of the uncharged α-helix from the uncharged random coil for poly-L -glutamic acid (PGA) decreases very rapidly in the limit of zero added salt concentration. This effect probably depends on the uncertainty affecting the choice of the extrapolation of the apparent pK for the random coil at low ionic strength. Above 0.1 M salt, where the free energy determination becomes meaningful, the anions and cations investigated do not affect the value of ΔF°, with the exception of Li⁺. Our data support the point of view that this cation binds to the peptide group. A class of salts produces an increase of the helical content of poly-L -ornithine (PO) both at low and high degree of ionization. This effect appears to be anion dependent. It is shown that (1) no change of ΔF° is involved; (2) recent theories of polyelectrolyte solutions cannot account for our results. We suggest that a true site binding of the anions to the charged amino groups occurs. The role of electrostatic binding in determining the conformational stability of proteins in the presence of some anions is stressed, and a general treatment for the electrostatic binding equilibria is outlined.     

An X-Ray diffraction study of poly-L-ornithine hydrobromide

An X-ray study has been made of the synthetic polypeptide poly-L -ornithine hydrobromide to investigate whether, like the chemically related polypeptides poly-L -lysine and poly-L -arginine hydrochlorides, it can undergo conformational changes merely from variations in its degree of hydration. X-ray powder and fiber photographs of specimens with from half up to about three molecules of water per ornithine residue show features that suggest a “cross-β-pleated-sheet” structure. Each pleated sheet is formed from parallel chains and the sheets are piled up along the b axis. The spacings, which do not vary appreciably with hydration, can be satisfactorily indexed in terms of an orthogonal unit cell with a = 4.60 Å, b = 30.2 Å, and c = 6.64 Å. These dimensions are shown by models to be compatible with the proposed structure. Removal of the last half molecule of water results in a very diffuse pattern but on rehydration the sharp pattern reappears. Specimens containing four to nine molecules of water per residue show a quite different pattern. Reflections other than equatorial are absent in oriented diagrams except for a 5.4 Å diffuse streak across the meridian which is suggestive of an α-helical structure. Increasing the relative humidity from 86% to about 100% causes the a axis of the hexagonal unit cell to increase from 14.7 Å to 15.3 Å. On drying, the β structure reappears once again. These conformational changes are very similar to those observed in poly-L -lysine hydrochloride except that the latter shows a more stable α-helical form. This difference may be explained in terms of stabilizing hydrophobic interactions between side chains, since ornithine has a shorter side chain than lysine.     

Interaction of poly-L-lysine with nucleic acids. II. Poly(A+U), poly(A+2U), and rice dwarf virus RNA

The optical density–temperature profile of double-stranded poly(A + U), triple stranded poly(A + 2U), and double-stranded RNA from rice dwarf virus in solutions with and without poly-L -lysine has been examined. When poly-L -lysine is added, more than one melting temperature T_m is observed for poly(A + U) and poly(A + 2U). One of them is considered to correspond to the melting of the polynucleotide molecule free from poly-L -lysine, and another to the melting of a polynucleotide–poly-L -lysine complex. For rice dwarf virus RNA, the T_m assignable to the complex is not found to be lower than 99°C. In every case, however, the hyperchromicity observed at the T_m of the free poly-nucleotide molecule is lowered linearly as the amount of poly-L -lysine added to the solution increases. This fact is taken as indicating that there is a stoichiometric complex formed. The stoichiometric ratio lysine/nucleotide in each complex is determined by examining the relation between the amount of poly-L -lysine added to the solution and the percentage of hyperchromicity remaining at T_m of the free polynucleotide molecule. The ratio is found to be 2/3 for all of the three complexes. A discussion is given on the molecular conformations of four types of polynucleotide–polylysine complex hitherto found: (A) double-stranded DNA plus poly-L -lysine in which the lyslne/nucleotide ratio is 1, (B) three-stranded RNA [poly(A + 2U)] plus poly-L -lysine in which the ratio is 2/3, (C) double-stranded RNA [poly (A + U) or rice dwarf virus RNA] plus poly-L -lysine in which the ratio is 2/3, and (D) double-stranded RNA [poly(I + C)] plus poly-L -lysine in which the ratio is 1/2.     

Inhibitors of N α-acetyl-l-ornithine deacetylase: synthesis, characterization and analysis of their inhibitory potency

A series of N ^α-acyl (alkyl)- and N ^α-alkoxycarbonyl-derivatives of l- and d-ornithine were prepared, characterized, and analyzed for their potency toward the bacterial enzyme N ^α-acetyl-l-ornithine deacetylase (ArgE). ArgE catalyzes the conversion of N ^α-acetyl-l-ornithine to l-ornithine in the fifth step of the biosynthetic pathway for arginine, a necessary step for bacterial growth. Most of the compounds tested provided IC₅₀ values in the μM range toward ArgE, indicating that they are moderately strong inhibitors. N ^α-chloroacetyl-l-ornithine (1g) was the best inhibitor tested toward ArgE providing an IC₅₀ value of 85 μM while N ^α-trifluoroacetyl-l-ornithine (1f), N ^α-ethoxycarbonyl-l-ornithine (2b), and N ^α-acetyl-d-ornithine (1a) weakly inhibited ArgE activity providing IC₅₀ values between 200 and 410 μM. Weak inhibitory potency toward Bacillus subtilis-168 for N ^α-acetyl-d-ornithine (1a) and N ^α-fluoro- (1f), N ^α-chloro- (1g), N ^α-dichloro- (1h), and N ^α-trichloroacetyl-ornithine (1i) was also observed. These data correlate well with the IC₅₀ values determined for ArgE, suggesting that these compounds might be capable of getting across the cell membrane and that ArgE is likely the bacterial enzymatic target.     

Far-infrared spectra of poly(-α-amino acids) with basic alkyl group side chains

Far-infrared spectra in the region from 700 to 60 cm^?1 have been measured for the α-helix structures of poly(L -α-amino-n-butyric acid), poly-L -norvaline, poly-L -norleucine, and poly-L -leucine and for the β-form structures of poly(L -α-amino-n-butyric acid), poly-L -valine, poly(DL -amino-n-butyric acid), poly-DL -norvaline, and poly-DL -norleucine. The changes of the spectra on N-deuteration have been measured in the region between 700 and 400 cm^?1. It is concluded that, the α-helix has characteristic bauds near 690, 650, 610, 380, 150, and 100 cm^?1, and that the β-form has characteristic bands near 700, 240, and 120 cm^?1. The main-chain vibrations in the region from 600 to 200 cm^?1 are strongly coupled with the side-chain deformation vibrations.     

Identification of a suppressor gene for the arginine-auxotrophic <Emphasis Type="Italic">argJ</Emphasis> mutation in <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis>

We recently proposed a metabolic engineering strategy for l-ornithine production based on the hypothesis that an increased intracellular supply of N-acetylglutamate may further enhance l-ornithine production in a well-defined recombinant strain of Corynebacterium glutamicum. In this work, an argJ-deficient arginine auxotrophic mutant of C. glutamicum is suppressed by a different locus of C. glutamicum ATCC13032. Overexpression of the NCgl1469 open reading frame (ORF), exhibiting N-acetylglutamate synthase (NAGS) activity, was able to complement the C. glutamicum arginine-auxotrophic argJ strain and showed increased NAGS activity from 0.03 to 0.17 units mg⁻¹ protein. Additionally, overexpression of the NCgl1469 ORF resulted in a 39% increase in excreted l-ornithine. These results indicate that the intracellular supply of N-acetylglutamate is a rate-limiting step during l-ornithine production in C. glutamicum.     

Raman studies of the helix-to-coil transition in poly-L-glutamic acid and poly-L-ornithine

The conformational transitions in water and in the solid state of poly-L -glutamic acid (PGA) and poly-L -ornithine (PO) have been studied by Raman spectroscopy. The Raman spectra of PGA, PO, and the monomer, dimer, and trimer of PGA in aqueous solutions and solid state are presented. The Raman spectral changes of PGA and PO were followed through the helix-to-coil transition induced by p^H, temperature, and solvent composition. A hyperchromic shift in the intensity of the amide III line accompanying the helix-to-coil transition was observed. This hyperchromic intensity shift occurs abruptly as a function of p^H but more slowly with heat denaturation of the alpha helix indicating that the Raman spectrum is sensitive to the transition mechanism. The high-temperature coil and the charged coil may have different conformations as evidenced by different amide III frequencies but similar intensities in these two conformations.     

Volume and sound velocity changes accompanying the -helix to -form and coil to -helix transitions in aqueous solution

The volume increment per amino acid residue for the α-helix to β-form transition of uncharged poly-L -lysine in aqueous solution was 3.8 ml in water and 4.3 ml in 0.2M and 1M NaBr solutions at 26°C, respectively. The sound velocity of the polymer solution was greater with the β-helix than with the β-form, but the difference was less in dilute salt solutions and disappeared in 1 or 2M NaBr solution. Thus, the β poly-L -lysine solution was slightly more compressible than the α-polymer solution, but this difference was diminished with increasing salt concentration. Both the volume change and the change in adiabatic compressibility of the polymer solution suggest that hydrophobic interactions among the lysyl groups in the β-form reduce the amount of “icebergs” surrounding the polymer molecules as compared with the amount originally present with the α-helix. The coil-to-helix transition of poly-L -glutamic acid in aqueous solution was also accompanied by a decrease in sound velocity. This can be attributed to the reduction of the water of hydration which is less compressible than free water.     

Syntheses and conformational studies of poly(Nε-methyl-L-lysine), poly(Nδ-methyl-L-ornithine), poly(Nδ-ethyl-L-ornithine), and their carbobenzoxy derivatives

The helix–coil transitions of poly(N^ε-methyl, N^ε-carbobenzoxy-L -lysine), poly(N^δ-methyl, N^δ-carbobenzoxy-L -ornithine), and poly(N^δ-ethyl, N^δ-carbobenzoxy-L -ornithine) in chloroform–dichloroacetic acid and their corresponding decarbobenzoxylated polypeptides in alkaline solutions were followed by optical rotation measurements. The introduction of a methyl or an ethyl group to the side chains of the carbobenzoxy derivatives of poly(L -lysine) and poly(L -ornithine) appeared to weaken the helical conformation at 25°C. The thermodynamic quantities of the three water-soluble polypeptides were calculated from the data on potentiometric titrations at several temperatures. For uncharged coil-to-helix transition, ΔH = ?370 cal/mol and ΔS = ?1.1 eu/mol for poly(N^ε-methyl-L -lysine), and ΔH = ?540 cal/mol and ΔS = ?1.6 eu/mol for poly(N^δ-ethyl-L -ornithine) (all on molar residue basis). The absolute values of ΔH and ΔS dropped in the region of pH-induced transition and eventually both quantities became positive. The initiation factor σ was about 2 × 10^?3, which was essentially independent of temperature. For poly(N^δ-methyl-L -ornithine) the coil-to-helix transition was not complete even when the polymer was uncharged at high pH.     

High Concentration—Ethanol Fermentation of Raw Ground Corn

1-Pyrroline-5-carboxylate dehydrogenase was purified and crystallized from Bacillus sphaericus. The crystalline preparation gave a single band on polyacrylamide slab gel electrophoresis. The molecular weight of the enzyme was determined to be about 100,000 by gel filtration. The enzyme consists of two subunits which are identical in molecular weight (50,000), as judged on SDS slab gel electrophoresis. The enzyme shows an optimum pH of 6.5 to 7.0. Its activity was 8.1 times higher with NADP⁺ than with NAD ⁺, and the enzyme was stabilized by NADP⁺. The apparent Km values for l-l-pyrroline-5-carboxylate, NADP⁺ and NAD⁺ are 4.2 × 10^–5m (with NADP⁺), 9.5 × 10~⁶m and 2.5 × IO^-3 m, respectively. The enzyme reaction is irreversible. A simple method for the determination of l-ornithine involving ornithine ¿-aminotransferase and 1- pyrroline-5-carboxylate dehydrogenase from B. sphaericus was developed. A linear relationship was found between the absorbance at 340 nm and the amount of l-ornithine (50 ~ 400 nmol), and between the fluorescence and the amount of l-ornithine (0.2 ~ 10 nmol).     

A new non-natural arginine-like amino acid derivative with a sulfamoyl group in the side-chain

Sulfamoylation of the l-ornithine methyl ester side-chain generates a non-natural arginine isostere which can be coupled with N-Fmoc-l-proline to synthesize analogues which maintain the structural characteristics of the biologically important Pro-Arg dipeptide sequence. As a probe of its biological importance, the sulfamoylated amino acid derivative was also incorporated as P1 residue in tripeptide structures matching the C-terminal subsequence of fibrinogen. The reported results demonstrate that the functionalization of l-ornithine side-chain with a neutral sulfamoyl group can generate an arginine bioisostere which can be used for the synthesis of prototypes of a new class of human thrombin inhibitors.     

Lysine oligopeptides. Preparation by ion-exchange chromatography

The preparation of L -lysine peptides (Lys_n, n = 2–14) from polyL -lysine is described. Fractionation by ion-exchange column chromatography of poly-L -lysine hydrolysates on a preparative scale resulted in 0.2–1.0 g quantities of individual members of the poly-L -lysine series. The peptides isolated proved to be analytically pure and the optical configuration was fully retained, as demonstrated by complete enzymic digestion. Peptides higher than n = 14 were also prepared. They consisted of oligolysine groups of narrow and accurately determined size distribution. Potentiometric titrations were used both to characterize the products and to demonstrate the characteristic dependence of the dissociation constants on size of the peptide.     

Ferric complexes of acetoacetyl derivatives of poly(L-lysine), poly(L-ornithine), and poly(L-diaminobutyric acid). II. Conformational properties in solution. Evidence for a stereospecific complex formation

The conformational properties of ferric complexes of poly(N^ε-acetoacetyl-L -lysine), poly(N^δ-acetoacetyl-L -ornithine), and poly(N^γ-acetoacetyl-L -diaminobutyric acid) were investigated in 1:1 water/dioxane by CD techniques. Optical activity was found in the visible and in the uv absorption region of the polymeric complexes. The conformation of the peptide backbone was always that of a right-handed α-helix, and was found independent of the degree of complexation, at least up to a degree of binding of 20%. In the absorption region of the side-chain chromophores the optical activity is substantially affected by complex formation. In all three cases a splitting of the ligand π → π* transition centered at 257 nm is observed. These data suggest a stereospecific complex formation. From the signs of the splitting it also appears that the chirality of the poly(N^δ-acetoacetyl-L -ornithine) complex is opposite that of the other two polymers.     

An infrared study on the conformation of poly-L-proline in concentrated aqueous salt solutions

The infrared absorption of poly-L -proline in concentrated aqueous salt solutions was measured in the fundamental region. Of primary interest were the carbonyl absorption of the peptide linkage and the methylene C–H bending absorption of the pyrrolidine ring. These spectral regions each show an additional component in the concentrated salt solutions. Using the position of the absorptions of poly-L -proline I (cis) and II (trans) as models, we conclude that both cis–trans linkages are present in the peptide in salt solutions. Increasing the temperature shifts the equilibrium slightly in favor of cis.     

Effect of side-chain hydrophobic bonding on the stability of homopolyamino acid alpha-helices: conformational studies of poly-l-leucine in water

The conformational properties of block copolymers of poly-L -leucine in water have been examined. The degree of polymerization of the poly-L -leucine block was 11 and 21, respectively, for samples prepared by the Merrifield procedure, and 56 for a sample prepared by the polymerization of leucine N-carboxyanhydride. The optical rotatory dispersion parameter b₀ was used to obtain the helix content θ_h at various temperatures. Application of the Lifson-Roig theory gave the following parameters for the transition of a residue from a coil to a helical state: v = 0.05–0.011, ΔH = +100 cal/mole, ΔS = +0.70–1.00 e. u. These parameters, as well as those for other polyamino acids, are accounted for by hydrophobic bonds involving the nonpolar side chains in the helical and randomly coiled forms. From the data for poly-L -alanine and theoretical values of the thermodynamic parameters for hydrophobic bond formation, the parameters for formation of a polyglycine helix are computed. By separating the contributions of the backbone, it is possible to obtain a set of thermodynamic parameters for the side-chain contributions of a number of polyamino acids. Increased size of the nonpolar side chain (with a larger contribution from hydrophobic bonding) makes a larger contribution to the stability of the α-helix which is reflected, among other ways, in a higher helix content at given temperature.     

A novel crude oil emulsifier excreted in the culture supernatant of a marine bacterium, Myroides sp. strain SM1

A marine bacterium, Myroides sp. SM1, can grow on weathered crude oil and show emulsification of it. The biosurfactant able to emulsify crude oil was excreted in culture supernatant of Myroides sp. SM1 grown on marine broth, which was extracted with chloroform/methanol (1:1) at pH 7 and purified by normal and reverse phase silica gel column chromatographies. The compound was ninhydrin-positive, and the chemical structure was elucidated by nuclear magnetic resonance (NMR), infrared spectroscopy (IR), fast atom bombardment mass spectrometry, and gas chromatography–mass spectrometry (GC-MS) to be a mixture of l-ornithine lipids, which were composed of l-ornithine and a different couple of iso-3-hydroxyfatty acid (C₁₅–C₁₇) and iso-fatty acid (C₁₅ or C₁₆) in a ratio of 1:1:1. The critical micelle concentration for a mixture of ornithine lipids was measured to be approximately 40 mg/l. A mixture of ornithine lipids exhibited emulsifying activity for crude oil in a broad range of pH, temperature, and salinity and showed higher surface activity for oil displacement test than other several artificial surfactants and a biosurfactant, surfactin.     

Calorimetric measurement of enthalpy change in the isothermal helix--coil transition of poly-L-lysine in aqueous solution

The heat ΔH° for converting an uncharged lysine residue from a coil to an α-helical state in poly-L -lysine in 0.1N KCl has been determined calorimetrically to be ?1200 cal/mole at both 15°C and 25°C. Essentially the same value has been obtained for the conversion of an uncharged residue from a coil to a β-pleated sheet state. Titration data provided information about the state of charge of the polymer in the calorimetric experiments, and optical rotatory dispersion data about its conformation. In order to compute ΔH°, the observed Calorimetric heat was corrected for the heat of breaking the sample cell, the heal of dilution of HCl, the heat of neutralization of OH^? ion, and the heat of ionization of the ε-amino group in the random coil. The latter was obtained from similar Calorimetric measurements on poly-D ,L -lysine, which was shown to be a good model for the random coil form of poly-L -lysine. The measured transition heat was ～0.7 cal., which is only 7% of the total heat liberated when a 40 ml solution of 0.25% w/v poly-L -lysine is brought, from pH 11 to pH 7; nevertheless it could be determined with a precision of ±8%. The conformation of poly-L -lysine at pH 11 appears to be completely helical at 15°C, but a mixture of 90% α-helix, 5% β form, and 5% coil at 25°C. Since ΔH° ～ 0 for the α ? β conversion, the polymer behaves like one of 95% α-helix and 5% coil in the calorimeter at 25°C. At neutral pH, poly-L -lysine is an extended coil, like poly-D ,L -lysine.