Enantiomer separation of fungicidal triazolyl alcohols by normal phase HPLC on polysaccharide‐based chiral stationary phases

Three fungicidal triazolyl alcohols (triadimenol, hexaconazole, and cis/trans‐1‐4‐chlorophenyl‐2‐1H‐1,2,4‐triazol‐1‐yl‐cycloheptanol) were completely separated into enantiomers by chiral HPLC using polysaccharide‐based chiral stationary phases. A better separation was achieved on cellulose and amylose carbamate phases compared with a cellulose ester phase. Peak shapes were almost symmetrical except for two cases, where tailing of the first eluted enantiomer and unusual symmetric peak broadening were observed. The effect of eluents on enantioseparation was also investigated. Chirality 11:195–200, 1999. © 1999 Wiley‐Liss, Inc.     

Liquid Chromatography Enantioseparations of Halogenated Compounds on Polysaccharide‐Based Chiral Stationary Phases: Role of Halogen Substituents in Molecular Recognition

Halogenated chiral molecules have become important in several fields of science, industry, and society as drugs, natural compounds, agrochemicals, environmental pollutants, synthetic products, and chiral supports. Meanwhile, the perception of the halogen moiety in organic compounds and its role in recognition processes changed. Indeed, the recognition of the halogen bond as an intermolecular interaction occurring when the halogen acts as a Lewis acid had a strong impact, particularly in crystal engineering and medicinal chemistry. Due to this renewed interest in the potentialities of chiral organohalogens, here we focus on selected recent applications dealing with enantioseparations of halogenated compounds on polysaccharide‐based chiral stationary phases (CSPs), widely used in liquid chromatography (LC). In particular, recently the first case of halogen bonding‐driven high‐performance LC (HPLC) enantioseparation was reported on a cellulose‐based CSP. Along with enantioseparations performed under conventional HPLC, representative applications using supercritical fluid chromatography (SFC) are reported. Chirality 27:667–684, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioseparation and molecular modeling study of chiral amines as three naphthaldimine derivatives using amylose or cellulose trisphenylcarbamate chiral stationary phases

This study describes the enantioseparation of three chiral amines as naphthaldimine derivatives, using normal phase HPLC with amylose and cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases (CSPs). Three chiral amines were derivatized using three structurally similar naphthaldehyde derivatizing agents, and the enantioselectivity of the CSPs toward the derivatives was examined. The degree of enantioseparation and resolution was affected by the amylose or cellulose-derived CSPs and aromatic moieties as well as a kind of chiral amine. Especially, efficient enantiomer separation was observed for 2-hydroxynapthaldimine derivatives on cellulose-derived CSPs. Molecular docking studies of three naphthaldimine derivatives of leucinol on cellulose tris(3,5-dimethylphenylcarbamate) were performed to estimate the binding energies and conformations of the CSP–analyte complexes. The obtained binding energies were in good agreement with the experimentally determined enantioseparation and elution order.     

Study on the HPLC‐based separation of some ezetimibe stereoisomers and the underlying stereorecognition process

The enantioseparation of ezetimibe stereoisomers by high‐performance liquid chromatography on different chiral stationary phases, ie, 3 polysaccharide‐based chiral columns, was studied. It was observed that cellulose‐based Chiralpak IC column exhibited the best resolving ability. After the optimization of mobile phase compositions in both normal and reversed phase modes, satisfactory separation could be obtained on Chiralpak IC column, especially in normal phase mode. The use of prohibited solvents as nonstandard mobile phase gave rise to better resolution than that of standard mobile phases (n‐hexane/alcohol system). In addition, the presence of ethanol in nonstandard mobile phase has played an important role in enhancing chromatographic efficiency and resolution between ezetimibe stereoisomers. Various attempts were made to comprehensively compare the chiral recognition capabilities of immobilized versus coated polysaccharide‐based chiral columns, amylose‐based versus cellulose‐based chiral stationary phases, reversed versus normal phase modes, and standard versus nonstandard mobile phases. Moreover, possible solute‐mobile phase‐stationary phase interactions were derived to explain how stationary and mobile phases affected the separation. Then the method validation with respect to selectivity, linearity, precision, accuracy, and robustness was carried out, which was demonstrated to be suitable and accurate for the quantitative determination of (RRS)‐ezetimibe impurity in ezetimibe bulk drug.     

Additive concentration effects on enantioselective separations in supercritical fluid chromatography

Polar additive concentration effects in supercritical fluid chromatography were studied on chiral stationary phases having either a macrocyclic glycopeptide or a derivatized polysaccharide as the chiral selector. Two basic additives, isopropylamine and triethylamine, were incorporated into the methanol modifier at various concentrations and the effects on retention, selectivity, and resolution were monitored. Many of the analytes failed to elute from the macrocyclic glycopeptide stationary phase in the absence of an additive and the most noticeable effect of increasing additive concentration was a significant decrease in retention. On the derivatized polysaccharide stationary phase the additives had little effect on retention, but they did foster significant improvements in peak shape and resolution.     

Enantioseparation of napropamide by supercritical fluid chromatography: Effects of the chromatographic conditions and separation mechanism

Supercritical fluid chromatography (SFC) is already used for enantioseparation in the pharmaceutical industry, but it is rarely used for the separation of chiral pesticides. Comparing with high performence liquid chromatography, SFC uses much more environmnetal friendly and economic mobile phase, supercritical CO₂. In our work, the enantioseparation of an amide herbicide, napropamide, using three different polysaccharide‐type chiral stationary phases (CSPs) in SFC was investigated. By studying the effect of different CSPs, organic modifiers, temperature, back‐pressure regulator pressures, and flow rates for the enantioseparation of napropamide, we established a rapid and green method for enantioseparation that takes less than 2 minutes: The column was CEL2, the mobile phase was CO₂ with 20% 2‐propanol, and the flow rate was 2.0 mL/min. We found that CEL2 demonstrated the strongest resolution capability. Acetonitrile was favored over alcoholic solvents when the CSP was amylose and 2‐propanol was the best choice when using cellulose. When the concentration of the modifiers or the flow rate was decreased, resolutions and analysis times increased concurrently. The temperature and back‐pressure regulator pressure exhibited only minor influences on the resolution and analysis time of the napropamide enantioseparations with these chiral columns. The molecular docking analysis provided a deeper insight into the interactions between the enantiomers and the CSPs at the atomic level and partly explained the reason for the different elution orders using the different chiral columns.     

Effect of Basic and Acidic Additives on the Separation of Some Basic Drug Enantiomers on Polysaccharide‐Based Chiral Columns With Acetonitrile as Mobile Phase

The separation of enantiomers of 16 basic drugs was studied using polysaccharide‐based chiral selectors and acetonitrile as mobile phase with emphasis on the role of basic and acidic additives on the separation and elution order of enantiomers. Out of the studied chiral selectors, amylose phenylcarbamate‐based ones more often showed a chiral recognition ability compared to cellulose phenylcarbamate derivatives. An interesting effect was observed with formic acid as additive on enantiomer resolution and enantiomer elution order for some basic drugs. Thus, for instance, the enantioseparation of several β‐blockers (atenolol, sotalol, toliprolol) improved not only by the addition of a more conventional basic additive to the mobile phase, but also by the addition of an acidic additive. Moreover, an opposite elution order of enantiomers was observed depending on the nature of the additive (basic or acidic) in the mobile phase. Chirality 27:228–234, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioseparation of 2-aryl-1,3-dicarbonyl analogues by high performance liquid chromatography using polysaccharide type chiral stationary phase

The HPLC chiral separation of 21 kinds of 2-aryl-1,3-dicarbonyl analogues was investigated in normal phase mode with amylose tris(3,5-dimethylphenylcarbamate), amylose tris((S)-1-phenylethylcarbamate), cellulose tris(3,5-dimethylphenylcarbamate), and cellulose tris(4-methylbenzoate) chiral stationary phases, respectively. The whole set of 2-aryl-1,3-dicarbonyl analogues shows better enantioselectivity and enantioseparation on amylose tris(3,5-dimethylphenyl carbamate) (Chiralpak AD-H). The temperature dependence of enantioselectivity was studied to improve the enantioseparation. In addition, efforts are made to relate analyte structure with the quality of the achieved chiral separation.     

HPLC and SFC enantioseparation of (±)‐Corey lactone diol: Impact of the amylose tris‐(3,5‐dimethylphenylcarbamate) coating amount on chiral preparation

As an important intermediate of prostaglandins and entecavir, optically pure Corey lactone diol (CLD) has great value in the pharmaceutical industry. In this work, the enantioseparation of (±)‐CLD was evaluated using high‐performance liquid (HPLC) and supercritical fluid chromatography (SFC). In HPLC, the separations of CLD enantiomers on polysaccharide‐based chiral stationary phases with both normal phase and polar organic phase were screened. And the conditions for the enantioseparation were optimized in HPLC and SFC, including the selection of mobile phase, temperature, back‐pressure, and other conditions. More important, it was found that the chiral resolutions were greatly enhanced by the increase of the coating amount of ADMPC (amylose tris‐(3,5‐dimethylphenylcarbamate)) under both HPLC and SFC conditions, which can lead to the increase of the productivity and the decrease of the solvent consumption. The preparations of optically pure CLD were evaluated on a semi‐preparative (2 × 25 cm) column packed with 30% ADMPC‐coated CSP under HPLC and SFC conditions. Preparative performances in terms of kkd are 1.536 kg racemate/kg CSP/day and 1.248 kg racemate/kg CSP/day in HPLC and SFC, respectively.     

Immobilization of (1S,2R)-(+)-2-amino-1,2-diphenylethanol derivates on aminated silica gel with different linkages as chiral stationary phases and their enantioseparation evaluation by HPLC

A chiral selector was prepared through the reaction between (1S,2R)-(+)-2-amino-1,2-diphenylethanol and phenyl isocyanate. This selector was immobilized on aminated silica gel, respectively, with bifunctional group linkers of 1,4-phenylene diisocyanate, methylene-di-p-phenyl diisocyanate, and terephthaloyl chloride to produce corresponding three chiral stationary phases. The prepared compounds and chiral stationary phases were characterized by FT-IR, elemental analysis, (1)H NMR, and solid-state (1)H NMR. The enantioseparation ability of these chiral stationary phases was evaluated with structurally various chiral compounds. The chiral stationary phase prepared with 1,4-phenylene diisocyanate as linker showed excellent enantioseparation ability. The influence of different linkages on the enantioseparation was discussed.     

Preparation and evaluation of regioselectively substituted amylose derivatives for chiral separations

Six novel regioselectively substituted amylose derivatives with a benzoate at 2‐position and two different phenylcarbamates at 3‐ and 6‐positions were synthesized and their structures were characterized by ¹H nuclear magnetic resonance (NMR) spectroscopy. Their enantioseparation abilities were then examined as chiral stationary phases (CSPs) for high‐performance liquid chromatography (HPLC) after they were coated on 3‐aminopropyl silica gels. Investigations indicated that the substituents at the 3‐ and 6‐positions played an important role in chiral recognition of these amylose 2‐benzoate serial derivatives. The derivatives demonstrated characteristic enantioseparation and some racemates were better resolved on these derivatives than on Chiralpak AD, which is one of the most efficient CSPs, utilizing coated amylose tris(3,5‐dimethylphenylcarbamate) as the chiral selector. Among the derivatives prepared, amylose 2‐benzoate‐3‐(phenylcarbamate/4‐methylphenylcarbamate)‐6‐(3,5‐dimethylphenylcarbamate) exhibited chiral recognition abilities comparable to that of Chiralpak AD and may be useful CSPs in the future. The effect of mobile phase on chiral recognition was also studied. In general, with the decreased concentration of 2‐propanol, better resolutions were obtained with longer retention times. Moreover, when ethanol was used instead of 2‐propanol, poorer resolutions were often achieved. However, in some cases, improved enantioselectivity was achieved with ethanol rather than 2‐propanol as the mobile phase modifier.     

Preparative enantiomeric separation of new selective CB2 receptor agonists by liquid chromatography on polysaccharide-based chiral stationary phases: determination of enantiomeric purity and assignment of absolute stereochemistry by X-ray structure analysis

The development of high-performance liquid chromatography (HPLC) methods using derivatized amylose chiral stationary phases has permitted preparative enantioseparations of substituted 4-oxo-1,4-dihydroquinoline-3-carboxamide derivatives with satisfactory yields. These compounds constitute new potent selective agonists of the cannabinoid CB(2) receptor. Analytical enantioseparation methods using UV detection were validated to determine the enantiomeric purity of these compounds. Linear calibration curves in the range from 0.18 to 0.40 mM were obtained; repeatability, limits of detection (LOD), and quantification (LOQ) were determined: LOD varied, for the various solutes, from 0.5 to 1.2 μM. All the separated compounds were prepared with high enantiomeric purities superior to 99.3% Absolute configuration of the enantiomers was unequivocally established by single crystal X-ray diffraction method and correlated to the chiroptical properties of isolated enantiomers.     

Comparative HPLC Enantioseparation of Thirty‐Six Aromatic Compounds on Four Columns of the Lux® Series: Impact of Substituents,Shapes and Electronic Properties

With the aim to define a combined computational/chromatographic empirical approach useful for the high‐performance liquid chromatography (HPLC) method development of new chiral compounds, 36 racemic aromatic compounds with different chemical structures were used as test probes on four polysaccharide‐based chiral stationary phases (CSPs) of the Lux series, namely Lux Cellulose‐1, Lux Cellulose‐2, Lux Cellulose‐4, and Lux Amylose‐2, using classical n‐hexane/2‐propanol mixtures as mobile phase. Electrostatic potential surfaces (EPSs) determined using Density Functional Theory (DFT) calculations were used to derive size, shape, and electronic properties of each analyte. Then a comparative HPLC screening was carried out in order to evaluate the impact of substituents, shapes, and electronic properties of the analytes on the chromatographic behavior as the column changes. The four CSPs showed good complementary recognition ability. The elution sequence was determined in 30 cases out of 36. The success rate to afford baseline separations (R_s ≥ 1.5) was estimated: 29 compounds out of 36 showed baseline enantioseparation on at least one of the four selected CSPs. The combined computational‐chromatographic screening furnished useful collective structure‐chromatographic behavior relationships and a map of the chiral discrimination abilities of the considered CSPs towards the analytes. On this basis, the chromatographic behavior of new analytes on a set of polysaccharide‐based CSPs can be mapped through the qualitative correlation of chromatographic parameters (k, α, R_s) to computed molecular properties of the analytes. Chirality 25:709–718, 2013. © 2013 Wiley Periodicals, Inc.     

Synthesis of polymer-type chiral stationary phases and their enantioseparation evaluation by high-performance liquid chromatography

Two new chiral polymers of different molecular weights were synthesized by the copolymerization of (1R,2R)-(+)-1,2-diphenylethylenediamine, phenyl diisocyanate and terephthaloyl chloride. The polymers were immobilized on aminated silica gel to afford two chiral stationary phases. The polymers and the corresponding chiral stationary phases were characterized by Fourier transform-IR, elemental analysis, 1H and 13C NMR. The surface coverages of chiral structural units on the chiral stationary phases were estimated as 0.27 and 0.39 mmol/g, respectively. The enantioseparation ability of these chiral stationary phases was evaluated with a variety of chiral compounds by high-performance liquid chromatography. The effects of the organic additives, the composition of mobile phases, and the injection amount of sample on enantioseparation were investigated. A comparison of enantioseparation ability between these two chiral stationary phases was made. It was believed that the chain length of polymeric chiral selector significantly affected the enantioseparation ability of corresponding chiral stationary phase.     

Evaluation of the macrocyclic antibiotic LY333328 as a chiral selector when used as a mobile phase additive in narrow bore HPLC

The macrocyclic antibiotic LY333328 has been evaluated as a chiral selector for the enantioseparation of nine dansylated amino acids. This macrocyclic glycopeptide was used as a chiral mobile phase additive (CMPA) in conjunction with narrow bore high‐performance liquid chromatography (HPLC). The key mobile phase parameters of LY333328 concentration and buffer pH were varied, along with variations in stationary phases consisting of C8, phenyl, cyano, and silica. After observing and plotting changes in retention and resolution based on corresponding variation in these parameters, a better understanding of the behavior of this chiral selector was obtained. The pK_a values of the dansyl amino acid analytes and LY333328 were measured and used to gain a better understanding of the microenvironment in which these enantioseparations occur. Optimized conditions resulted in the baseline separation of eight of nine dansyl amino acids. Chirality 11:75–81, 1999. © 1999 Wiley‐Liss, Inc.     

Enantioseparation on 4-halogen-substituted phenylcarbamates of amylose as chiral stationary phases for high-performance liquid chromatography

Four 4-halogen-substituted phenylcarbamate derivatives of amylose were prepared and their chiral recognition abilities as chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC) were evaluated and compared with those of the corresponding cellulose derivatives. The amylose derivatives with fluoro, chloro, bromo, or iodo group at the four-position on the phenyl group were found to show higher chiral resolving ability than the corresponding cellulose derivatives. Among four amylose derivatives 4-fluoro- and 4-chlorophenylcarbamates showed an excellent chiral recognition ability. Especially, amylose tris(4-chlorophenylcarbamate) resolved (±)-1,2,2,2-tetraphenylethanol with a very high α value (α = 8.29). In order to obtain useful information concerning the chiral recognition mechanism of this resolution, we also performed enantioseparation of a variety of analogous racemic alcohols, and found that both the hydroxy and bulky triphenylmethyl groups of the racemate are essential for the effective chiral recognition. Chirality 9:63–68, 1997. © 1997 Wiley-Liss, Inc.     

Screening Approach for Chiral Separation of β‐Aminoketones by HPLC on Various Polysaccharide‐Based Chiral Stationary Phases

Nine β‐aminoketones were synthesized via Mannich reaction when benzaldehyde was condensed with some primary amines and acetophenone. The purified compounds were identified by using spectroscopic methods. The enantiomeric separation of these derivatives was carried out by high‐performance liquid chromatography (HPLC) using several coated and immobilized polysaccharide stationary phases, namely, Chiralcel^® OD‐H, Chiralcel^® OD, Chiralcel^® OJ, Chiralpak^® AD, Chiralpak^® IA, and Chiralpak^® IB using different mobile phases composed of n‐hexane and alcohol mixed in various ratios or pure ethanol or isopropanol. The retention behavior and selectivity of these chiral stationary phases were examined in isocratic normal phase mode. The results indicate that cellulose derivatives have higher enantioselectivity than amylose derivatives for the separation of racemic β‐amino ketones. Chirality 27:332–338, 2015. © 2015 Wiley Periodicals, Inc.     

Direct high-performance liquid chromatographic separation of the enantiomers of an aromatic amine and four aminoalcohols using polysaccharide chiral stationary phases and acidic additive

The HPLC enantiomeric separation of N-benzyl-alpha-methyl-benzylamine, phenylalaninol, tryptophanol, 2 (diphenylhydroxymethyl)pyrrolidine, and isoproterenol was accomplished in the normal-phase mode using two polysaccharide-derived chiral stationary phases (CSPs) and various n-hexane/2-propanol mobile phases with acidic (TFA) or basic (DEA) additive. The compounds were separated without any derivatization and separation factor range between 2.09 and 1.09 with resolution factor 3.4 and 0.4, respectively. The best separation of the enantiomers of the amine was achieved on amylose tris (3, 5-dimethylphenylcarbamate) CSP with TFA additive in the mobile phase; in acidic conditions, instead, the best enantioseparation of the aminoalcohols was achieved on cellulose tris (3, 5-dimethylphenilcarbamate). A long equilibration time of the CSP when switching from an undoped mobile phase to a doped one is required to obtain reproducible results.     

Efficient access to all four stereoisomers of phenylalanine cyclopropane analogues by chiral HPLC

Bonded polysaccharide‐derived chiral stationary phases were found to be useful for the preparation of the four stereoisomers of the cyclopropane analogue of phenylalanine (c₃Phe) as well as for the direct determination of the enantiomeric purity of c₃Phe derivatives by HPLC. Three chiral stationary phases, consisting of cellulose and amylose derivatives chemically bonded on allylsilica gel, were tested. The mixed 10‐undecenoate/3,5‐dimethylphenylcarbamate of cellulose, 10‐undecenoate/3,5‐dimethylphenylcarbamate of amylose and 10‐undecenoate/p‐methylbenzoate of cellulose were the starting polysaccharide derivatives for CSP‐1, CSP‐2, and CSP‐3, respectively. Using mixtures of n‐hexane/chloroform/2‐propanol as mobile phase on a semi‐preparative column (150 mm × 20 mm ID) containing CSP‐2, we separated about 1.7 g of racemic cis‐methyl 1‐tert‐butoxycarbonylamino‐2‐phenylcyclopropanecarboxylate (cis‐ 6 ) and 1.2 g of racemic trans‐methyl‐1‐tert‐butoxycarbonylamino‐2‐phenylcycloprop‐anecarboxylate (trans‐ 6 ) by successive injections. Chirality 11:583–590, 1999. © 1999 Wiley‐Liss, Inc.     

Enantioseparation of racecadotril using polysaccharide‐type chiral stationary phases in polar organic mode

Enantioseparation of the antidiarrheal drug, racecadotril, was investigated by liquid chromatography using polysaccharide‐type chiral stationary phases in polar organic mode. The enantiodiscrimininating properties of 4 different chiral columns (Chiralpak AD, Chiralcel OD, Chiralpak AS, Chiralcel OJ) with 5 different solvents (methanol, ethanol, 1‐propanol, 2‐propanol, and acetonitrile) at 5 different temperatures (5–40 °C) were investigated. Apart from Chiralpak AS column the other 3 columns showed significant enantioseparation capabilities. Among the tested mobile phases, alcohol type solvents were superior over acetonitrile, and significant differences in enantioselective performance of the selector were observed depending on the type of alcohol employed. Van't Hoff analysis was used for calculation of thermodynamic parameters which revealed that enantioseparation is mainly enthalpy controlled; however, enthropic control was also observed. Enantiopure standard was used to determine the enantiomer elution order, revealing chiral selector—and mobile‐phase dependent reversal of enantiomer elution order. Using the optimized method (Chiralcel OJ stationary phase, thermostated at 10 °C, 100% methanol, flow rate: 0.6 mL/min) baseline separation of racecadotril enantiomers (resolution = 3.00 ± 0.02) was achieved, with the R‐enantiomer eluting first. The method was validated according to the ICH guidelines, and its application was tested on capsule and granules containing the racemic mixture of the drug.