Components of the regular surface array of Aquaspirillum serpens MW5 and their assembly in vitro.

The two-layered regular surface array of Aquaspirillum serpens MW5 was removed from cell envelopes and dissociated into subunits by treatment with 6 M urea. The surface components reassembled onto an outer membrane surface and self-assembled into planar sheets in vitro in the presence of Ca2+ or Sr2+. The two layers were removed sequentially from cell envelopes by a two-step extraction procedure involving initial treatment with a high-pH buffer to remove the outermost surface layer and subsequent treatment with 6 M urea to remove the innermost layer. Analysis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that the outer and inner layers of the array were composed of two proteins with molecular weights of 125,000 and 150,000, respectively. The two layers assembled sequentially; the 150,000-molecular-weight protein formed an array on an outer membrane surface, and the 125,000-molecular-weight protein required that array as a template for its in vitro assembly.     

Surface protein composition of Aeromonas hydrophila strains virulent for fish: identification of a surface array protein.

The surface protein composition of members of a serogroup of Aeromonas hydrophila which exhibit high virulence for fish was examined. Treatment of whole cells of representative strain A. hydrophila TF7 with 0.2 M glycine buffer (pH 4.0) resulted in the release of sheets of a tetragonal surface protein array. Sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis analysis showed that this sheet material was composed primarily of a protein of apparent molecular weight 52,000 (52K protein). A 52K protein was also the predominant protein in glycine extracts of other members of the high-virulence serogroup. Immunoblotting with antiserum raised against formalinized whole cells of A. hydrophila TF7 showed the 52K S-layer protein to be the major surface protein antigen, and impermeant Sulfo-NHS-Biotin cell surface labeling showed that the 52K S-layer protein was the only protein accessible to the Sulfo-NHS-Biotin label and effectively masked underlying outer membrane (OM) proteins. In its native surface conformation the 52K S-layer protein was only weakly reactive with a lactoperoxidase 125I surface iodination procedure. A UV-induced rough lipopolysaccharide (LPS) mutant of TF7 was found to produce an intact S layer, but a deep rough LPS mutant was unable to maintain an array on the cell surface and excreted the S-layer protein into the growth medium, indicating that a minimum LPS oligosaccharide size was required for A. hydrophila S-layer anchoring. The 52K S-layer protein exhibited hear-dependent SDS-solubilization behavior when associated with OM, but was fully solubilized at all temperatures after removal from the OM, indicating a strong interaction of the S layer with the underlying OM. The native S layer was permeable to 125I in the lactoperoxidase radiolabeling procedure, and two major OM proteins of molecular weights 30,000 and 48,000 were iodinated. The 48K species was a peptidoglycan-associated, transmembrane protein which exhibited heat-modifiable SDS solubilization behaviour characteristic of a porin protein. A 50K major peptidoglycan-associated OM protein which was not radiolabeled exhibited similar SDS heat modification characteristics and possibly represents a second porin protein.     

Ultrastructure and biochemistry of the cell wall of Methanococcus voltae.

The ultrastructure and chemical composition of the cell wall of the marine archaebacterium Methanococcus voltae were studied by negative-staining and freeze-etch electron microscopy and by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. M. voltae possesses a single regularly structured (RS) protein layer external to the plasma membrane. Freeze-etch preparations of cells indicated that the protein subunits are hexagonally arranged with a center-to-center spacing of approximately 10 nm. The extracted RS protein had a molecular weight of 76,000. It was present on envelopes prepared by shearing in a French press, osmotic lysis, or sonication, as indicated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. NaCl was not required for attachment of the RS protein to the underlying plasma membrane. The hexagonal array could be demonstrated by platinum shadowing and freeze-etching of envelopes, but negative staining in the abscence of NaCl failed to stabilize the array. The RS protein could be solubilized by urea, guanidine hydrochloride, dithiothreitol, and several detergents, including Nonidet P-40, Triton X-100, and Tween 20. However, the most specific release of the wall protein from envelopes occurred after a heat treatment in HEPES (N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid) buffer at 50 to 60 degrees C.     

Ultrastructure and partial characterization of a regular array in the cell wall of Lactobacillus brevis.

The cell wall of Lactobacillus brevis was revealed by electron microscopy to have an outer layer composed of a regular array. The morphological unit of the regular array appeared to consist of four spherical subunits, each about 2 nm in diameter, which were arranged in a tetragonal pattern about 4.5 by 7.0 nm in dimension. The regular array was composed of the tetragonal units in rows in two directions at an angle of about 75 degrees to each other. The average spacing between the rows was about 10 nm in one direction and about 7 nm in the other. The tetragonally arranged subunits were removed from the cell wall by treatment with guanidine hydrochloride, urea, or sodium dodecyl sulfate (SDS) but not by the action of ethylenediaminetetraacetate, nonionic detergents, or proteolytic enzymes except pepsin. The regular subunits were shown to be composed of a protein with a molecular weight of about 51,000 by SDS-polyacrylamide gel electrophoresis.     

An improved in‐gel digestion method for efficient identification of protein and glycosylation analysis of glycoproteins using guanidine hydrochloride

In‐gel digestion followed by LC/MS/MS is widely used for the identification of trace amounts of proteins and for the site‐specific glycosylation analysis of glycoproteins in cells and tissues. A major limitation of this technique is the difficulty in acquiring reliable mass spectra for peptides present in minute quantities and glycopeptides with high heterogeneity and poor hydrophobicity. It is considered that the SDS used in electrophoresis can interact with proteins noncovalently and impede the ionization of peptides/glycopeptides. In this study, we report an improved in‐gel digestion method to acquire reliable mass spectra of a trace amount of peptides/glycopeptides. A key innovation of our improved method is the use of guanidine hydrochloride, which forms complexes with the residual SDS molecules in the sample. The precipitation and removal of SDS by addition of the guanidine hydrochloride was successful in improving the S/N of peptides/glycopeptides in mass spectra and acquiring a more comprehensive MS/MS data set for the various glycoforms of each glycopeptide.     

Subunit structure of human alpha 2-macroglobulin (alpha 2-MG) with respect to its interaction with trypsin.

SDS-polyacrylamide gel electrophoresis of a recently prepared alpha 2-macroglobulin solution showed only the polypeptide chains of 190,000 molecular weight. Reduction-alkylation of this preparation followed by gel-filtration on a Sephadex G-200 column in 5.2 M guanidine hydrochloride was unable to separate a fraction of 83,000 molecular weight as previously described. Nevertheless, after incubation of a mixture alpha 2-macroglobulin-trypsin during 45 minutes at 37 degrees C, approximately 60 per cent of the preparation were converted in a component with 83,000 molecular weight as detected in SDS polyacrylamide gel. That component was isolated on Sephadex G-200 in guanidine hydrochloride and corresponds to the subunit, fraction II. According to the results of the present work together with those of previous studies, it can be assumed that alpha 2-MG is a 780,000 molecular weight protein (19S) formed of two half-molecules of equal weight (11-12S). The half-molecule contains two polypeptide chains of 180,000-190,000 molecular weight, each of them having, in its middle, a specific region particularly susceptible to attack by proteases.     

Three-dimensional structure of an open form of the surface layer from the fish pathogen Aeromonas salmonicida.

Cell-free culture supernatants of a lipopolysaccharide (LPS) O-polysaccharide-deficient, single-insertion transposon mutant of the tetragonal surface protein array (S layer)-containing fish pathogen Aeromonas salmonicida were examined by electron microscopy. Negative staining showed that the S layer was released as sheets of tetragonal material, indicating that although surface retention of assembled S layer requires the presence of wild-type LPS oligosaccharides, initial assembly of S-layer subunits into sheets does not require the presence of O-polysaccharide chains. The three-dimensional structure of the S layer was reconstructed from tilted micrographs of the released sheets. Horizontal sections through this reconstruction showed that the released sheets were composed of two identical S layers that were perfectly in register. The reconstructed layer had a lattice constant of 12.5 nm. At a resolution of 1.6 nm, the layer consisted of a major tetragon at one fourfold axis of symmetry and a minor tetragon at the second fourfold axis of symmetry. The core, composed of four of the major domains, contained a large depression and was located toward the inside of the layer. The minor tetragon provided connectivity within the layer and was located toward the outer surface of the layer. Projections through the double layer gave a type I (closed) pattern (M. Stewart, T. J. Beveridge, and T. J. Trust, J. Bacteriol. 166:120-127, 1986), yet projections through the single layer indicated that the type II (open) pattern was present. This open pattern was indistinguishable from that seen in S layer released from the surfaces of wild-type cells.     

Isolation and in vitro assembly of the components of the outer S layer of Lampropedia hyalina.

The outermost component of the S layer of Lampropedia hyalina, the punctate layer, is assembled onto an inner perforate layer. The punctate layer is composed of long, tapered cylindrical units centered on p6 symmetry axes and connected by six fine linking arms, joining at the axis of threefold symmetry to create a hexagonal layer with a lattice constant of 25.6 +/- 0.5 nm (J. A. Chapman, R. G. E. Murray, and M. R. J. Salton, Proc. R. Soc. London Ser. B 158:498-513, 1963; R. G. E. Murray, Can. J. Microbiol. 9:593-600, 1963). Extraction of cell envelopes with 100 mM Tris buffer (pH 8) containing 2% deoxycholate resulted in the release of several proteins, but left the S layers intact. The punctate layer was then extracted with 3 M guanidine hydrochloride or 6 M urea, leaving the perforate layer intact. This treatment led to the release of three polypeptides with molecular weights of 60,000, 66,000, and 240,000 (60K, 66K, and 240K polypeptides). These three polypeptides reassembled on the perforate layer as a template to form the S-layer complex or self-assembled to form the punctate layer alone after dialysis of the extract against 50 mM HEPES (N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid) buffer (pH 7.5) containing 10 mM CaCl2. The self-assemblies were composed of a 240K polypeptide and a 60K polypeptide. The 240K and 60K polypeptides were separated by column chromatography and examined by electron microscopy. The 240K polypeptide appeared in negative stain as a long, flexible structure and assembled into loose arrays with sixfold symmetry with obvious Y-shaped linking elements, while fractions containing both the 60K and 240K polypeptides showed assemblies closely resembling the punctuate layer. Immunoelectron microscopy was used to confirm the presence of both the 60K and 240K polypeptides as components of the punctuate layer.     

Molecular weights of apoprotein B obtained from human low-density lipoprotein (apoprotein B-PI) and from rat very low density lipoprotein (apoprotein B-PIII)

Human low-density lipoproteins (LDL) were isolated from single donors by differential centrifugation between densities of 1.020 and 1.050 g/mL. The LDL were reduced and alkylated in 7 M guanidine hydrochloride, and the lipid was removed by multiple extractions in the cold with a mixture of diethyl ether and ethanol. Sedimentation studies on the resultant human apoprotein B (apoprotein B-PI) at low concentrations in 6.00 M guanidine hydrochloride showed a single sharp boundary with a sedimentation coefficient of 2.15 +/- 0.04 S at 25 degrees C, uncorrected for viscosity or density. Diffusion experiments performed in the same solvent at low speeds in the analytical ultracentrifuge gave a D25 = 0.694 +/- 0.043 Fick. Combining these values with an apparent specific volume of 0.703 mL/g yielded a molecular weight of 387 000, indistinguishable from that obtained by sedimentation equilibrium analysis in 7 M guanidine hydrochloride. Similar values were also obtained by calibrated sedimentation analysis, by Sepharose 2B chromatography in guanidine hydrochloride, and by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Rat very low density lipoproteins (VLDL), isolated from sera of Triton WR1339 treated animals, were used as the source of rat apoprotein B-PIII. The delipidated VLDL were solubilized in sodium dodecyl sulfate, and apoprotein B-PIII was isolated by Sepharose 4B chromatography. With appropriate corrections for density and viscosity, the behavior of rat apoprotein B-PIII was identical, upon analytical ultracentrifugation, in 6 and 7.7 M guanidine hydrochloride, corresponding to sedimentation and diffusion coefficients of 1.47 S and 0.92 Fick, respectively, in 6 M guanidine hydrochloride. These data may be combined to yield a molecular weight of 210 000. Similar values were obtained by calibrated sedimentation analysis, by Sepharose 2B chromatography in guanidine hydrochloride, and by polyacrylamide gel electrophoresis in sodium dodecyl sulfate.     

The intracellular localization of the microvillus 110K protein,a component considered to be involved in side-on membrane attachment of F-actin

The microfilament bundle of intestinal epithelial cell microvilli is known to contain four major associated proteins in addition to actin. Of particular interest is a polypeptide of molecular weight 110000 (110K protein), since it is assumed to provide the lateral attachment of the bundle to the inner side of the plasma membrane. 110K protein was purified by SDS gel electrophoresis and used to elicit antibodies. Antigen-affinity-purified IgGs were used to study the intracellular organization of 110K protein by immunocytochemical procedures. The results are consistent with the proposed membrane attachment function for the 110K protein. It is absent from the terminal web level and restricted to that part of the core filament bundle which underlies the plasma membrane of the microvilli.     

Epstein-Barr virus (EBV) antigenic determinants on subunits of the EBV determined nuclear antigen (EBNA)

In order to characterize the substructure of the Epstein-Barr virus determined nuclear antigen (EBNA) which is considered to have a molecular weight of 180 K in its native form, we have examined the antigenic specificity of the polypeptides obtained after denaturation of this molecule. Two procedures were employed; treatment by sodium dodecyl sulfate (SDS) and heat followed by gel electrophoresis, or denaturation by guanidine hydrochloride followed by gel filtration, which allowed us to detect a specific antigenic activity in the 50 K region, following dialysis. The denatured molecules could be reassociated into larger molecules (50 to 180 K) which retain the property of binding to fixed nuclei, as does native EBNA. These results indicate that EBNA has a polymeric structure and that 50 K subunits carry the antigenic determinants.     

Identification of Xenopus laevis sperm and egg envelope binding components on nitrocellulose membranes

Interacting egg envelope and sperm surface components were identified for Xenopus laevis using blotting methods. Sperm were extracted with sodium dodecyl sulfate (SDS), the extracted proteins separated by gel electrophoresis and blotted, and the blots treated with 125I-labeled heat solubilized envelopes. The converse experiment was also performed where envelope components were separated by gel electrophoresis, blotted, and the blots treated with 125I-labeled sperm components. Blotted sperm components with apparent molecular weights of 14K, 19K, 25K, and 35K selectively bound the solubilized envelopes. All of the envelope binding components were found to be localized on the sperm surface by radioiodinating intact sperm using Iodo-Gen. The blotted egg envelope component with an apparent molecular weight of 37K selectively bound to solubilized sperm components, and this binding was due to the protein moiety of the glycoprotein. 125I-labeled heat solubilized envelopes from unfertilized and fertilized eggs showed the same pattern of binding to blotted sperm components. Selected sulfated carbohydrates (fucoidan, dextran sulfate, and heparin, but not chondroitin sulfate) inhibited fertilization and binding of 125I-labeled heat solubilized envelopes to blotted sperm extract. Thus, the binding of heat solubilized envelopes to electrophoretically separated and blotted sperm proteins may reflect cellular interactions.     

Characterization of the sex steroid binding protein of human pregnancy serum. Improvements in the purification procedure

The sex steroid binding protein (SBP) of human pregnancy serum was purified to homogeneity by the sequential use of ammonium sulfate precipitation, affinity chromatography on 5alpha-dihydrotestosterone-17beta-succinyldiaminoethyl-(1,4-butanediol diglycidyl ether)-agarose, and preparative polyacrylamide gel electrophoresis. The yield of pure SBP was improved from 5% as originally reported [Mickelson, K. E., and Petra, P. H. (1975), Biochemistry 14, 957] to 34%. Homogeneity of SBP was shown by equilibrium sedimentation ultracentrifugation in 6 M guanidine hydrochloride containing 0.1 M mercaptoethanol which yields a minimum molecular weight of 36 335 +/- 525. The protein is also homogeneous when examined by gel electrophoresis in the presence of sodium dodecyl sulfate. A value of 52 000 for the molecular weight is obtained by this method. SBP partially purified from Cohn fraction IV has also a molecular weight of 52 000 by gel electrophoresis in the presence of sodium dodecyl sulfate; that fraction is contaminated with another protein of molecular weight 90 000 which must be removed to obtain homogeneous SBP. The amino acid composition of SBP isolated from pregnancy serum is presented.     

Acid-base and optical properties of heparin.

Sodium dodecylsulfate (SDS) can be removed from protein by gel electrophoresis. This principle is useful for separating protein bands which are close to each other in SDS gel electrophoresis. We accomplished this by “two-stage” gel electrophoresis. In this system, SDS gel electrophoresis was carried out as the first step. Gel electrophoresis was then continued (after replacing the buffer) without SDS. SDS was then eluted from the gel into the lower buffer during the second stage. Separation of the subunits was significantly improved relative to simple SDS gel electrophoresis.     

Thermodynamic characterization of hog kidney D-amino acid oxidase apoenzyme in concentrated guanidine hydrochloride solution. Preferential interaction with the solvent components and the molecular weight of the monomeric unit

This paper describes the physical characterization of the monomeric unit of hog kidney D-amino acid oxidase apoenzyme in 6 M guanidine hydrochloride (GuHCl) solution by means of differential refractometry, densimetry, light scattering, equilibrium sedimentation, and high-speed gel filtration chromatography. In 6 M GuHCl solution, the oxidase interacts preferentially with GuHCl: the values of the preferential interaction parameter are 0.11 +/- 0.03 (S.D.) g/g of protein by densimetry and 0.14 +/- 0.04 g/g of protein by refractometry. The volume change, delta V, of the oxidase on transfer from the native to the denatured state is -350 ml/mol. The molecular weight of the monomeric apoenzyme is 39,600 +/- 1,700 by light scattering and 38,000 +/- 1,200 by high-speed equilibrium sedimentation. The values of the molecular weight estimated by the empirical methods, i.e., sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis and high-speed gel filtration chromatography in 6 M GuHCl, agree well with those obtained by the thermodynamic methods mentioned above. These results confirm definitely that the complex of the apoenzyme with SDS normally behaves in the same manner as those of standard proteins in SDS-gel electrophoresis. This is also supported in this study by the analysis of the electrophoretic data at several gel concentrations by Ferguson plots. The molecular weight of quasi-D-amino acid oxidase apoenzyme was also examined by the empirical methods.     

一步法电泳分析肌联蛋白亚型和肌球蛋白重链

目的为研究超大分子量肌小节蛋白肌联蛋白(titin)的生理病理功能,在一次电泳过程中同时分离titin各亚型和中分子量肌小节蛋白肌球蛋白重链(myosin heavy chain,MHC)。方法使用16cm×18cm垂直电泳系统,在电泳板下1/3灌注10g/L SDS-PAGE胶,上2/3灌注60g/L SDS-琼脂糖(SDS-VAGE)胶。低温8℃下持续电泳5h,在电泳板上层以SDS-VAGE胶电泳分离titin亚型,下层以SDS-PAGE胶电泳分离MHC。电泳后VAGE胶使用银染法标记titin各亚型,PAGE胶使用考马斯亮蓝染色法标记MHC。结果 titin各亚型得到有效的分离,目标蛋白条带显示清晰,与其分子量大小一一对应,分离效果明确。结论一步法垂直电泳系统可应用于超大分子量蛋白的电泳,同时可分离多个分子量差距大的蛋白,提高蛋白电泳实验效率。     

Analysis of the major large polypeptides of rat seminal vesicle secretion: SVS I, II, and III

Rat seminal vesicle secretion (SVS) contains a variety of protein complexes that seem to be linked by interchain disulfide bonds. Upon reduction and analysis by sodium dodecyl sulfate (SDS) gel electrophoresis, this pattern resolves to 3 major high molecular weight (SVS I-100,000, SVS II-50,000, SVS III-37,000) and 3 major low molecular weight protein bands (SVS IV, V, and VI). A two-dimensional SDS gel (1st dimension unreduced, 2nd dimension reduced) permitted identification of the components of the cross-linked species. In the native secretion, SVS I forms a series of oligomers that include both SVS II and III. Essentially all of SVS III is involved in these complexes, while the bulk of SVS II occurs instead as an apparent homodimer. The smaller proteins (SVS IV-VI) are not involved in covalently crosslinked complexes. The reduced forms of the larger polypeptides were isolated by a variety of procedures involving agarose gel filtration in 6M guanidine hydrochloride, reversed-phase high pressure liquid chromatography, ammonium sulfate fractionation, and preparative polyacrylamide gel electrophoresis. Based on its size, solubility, and amino acid composition, SVS II was identified as the major clottable protein of the secretion.     

The sodium channel from rat brain. Separation and characterization of subunits

Procedures are described for separation of the alpha, beta 1, and beta 2 subunits of the voltage-sensitive sodium channel from rat brain by gel filtration in sodium dodecyl sulfate (SDS) before and after reduction of intersubunit disulfide bonds or by preparative SDS-gel electrophoresis. Partial proteolytic maps of the SDS-denatured subunits indicate that they are nonidentical polypeptides. They are all heavily glycosylated and contain complex carbohydrate chains that bind wheat germ agglutinin. The apparent molecular weights of the separated subunits were estimated by gradient SDS-gel electrophoresis, by Ferguson analysis of migration in SDS gels of fixed acrylamide concentration, or by gel filtration in SDS or guanidine hydrochloride. For the alpha subunit, SDS-gel electrophoresis under various conditions gives an average Mr of 260,000. Gel filtration methods give anomalously low values. Removal of carbohydrate by sequential treatment with neuraminidase and endoglycosidase F results in a sharp protein band with apparent Mr = 220,000, suggesting that 15% of the mass of the native alpha subunit is carbohydrate. Electrophoretic and gel filtration methods yield consistent molecular weight estimates for the beta subunits. The average values are: beta 1, Mr = 36,000, and beta 2, Mr = 33,000. Deglycosylation by treatment with endoglycosidase F, trifluoromethanesulfonic acid, or HF yields sharp protein bands with apparent Mr = 23,000 and 21,000 for the beta 1 and beta 2 subunits, respectively, suggesting that 36% of the mass of the native beta 1 and beta 2 subunits is carbohydrate.     

Chemical alterations in cell envelopes of polymyxin-resistant Pseudomonas aeruginosa isolates.

Cell envelopes from Pseudomonas aeruginosa strains resistant to polymyxin were compared with cell envelopes from polymyxin-sensitive strains as to their content of total protein, carbohydrate, and 2-keto-3-deoxyoctonate and as to their protein composition as determined by slab polyacrylamide gel electrophoresis. The cell envelopes of the polymyxin-resistant strains had reduced amounts of lipopolysaccharide, as indicated a reduction in both carbohydrate and 2-keto-3-deoxyoctonate concentrations, and a greatly altered protein composition as shown by polyacrylamide gel electrophoresis. There was a quantitative increase in total cell envelop protein in these strains. However, those protein bands identified as being major outer membrane proteins upon polyacrylamide gel electrophoresis of separated outer and cytoplasmic membranes were reduced greatly in concentration in the polymyxin-resistant cell envelopes. Thus, it appears that polymyxin resistance in these strains is associated with the alteration of the outer membrane through a loss of lipopolysaccharide and outer membrane proteins.     

Improved method of total histone isolation from Arabidopsis thaliana

Standard methods of isolation of chromatin histones from Arabidopsis thaliana yield strongly degraded proteins when applied to plants grown from seeds in axenic liquid media. For isolation of undegraded histones from Arabidopsis grown in liquid media we used extraction with guanidine hydrochloride followed by selective binding of histones on BioRex 70 resin in the batch system. The quality of obtained proteins is confirmed by SDS polyacrylamide gel electrophoresis. This revised version was published online in July 2006 with corrections to the Cover Date.