Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5–2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3–5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5–30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12–16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1–2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

Staining Raw and Cooked Apple Tissues for Study of Cell Wall Structure

Permanent preparations were made of paraffin sections from raw and cooked apple tissues stained with microchemical color reagents for pectins and pentosans. Sections stained with ruthenium red to show pectins were dehydrated and covered in balsam, and sections stained with diphenylene diamine acetate (DDA) to show pentosans were washed with water and covered in Clearcol.

Cooking was accomplished by steaming cubed histological samples. Both raw and steamed specimens were fixed in FAA in a vacuum chamber, dehydrated and cleared in tertiary butyl alcohol, and embedded in paraffin. Paraffin sections first fixed to slides with Haupt's adhesive were further stabilized by immersing in a 1% celloidin solution after dissolving the paraffin.

Ruthenium oxychloride flakes were dissolved in a Coplin jar of water containing 2 drops of ammonium hydroxide. Rehydrated sections were stained in ruthenium red 30 minutes and rinsed in water. Three methods of further preparation follow: (1) Flood sections with 10% gum arabic; drain and air-dry thoroughly; immerse in xylene 5 minutes; cover in balsam. (2) Drain and air-dry sections; if desired, counterstain dry sections with Johansen's fast green solution; immerse in xylene; cover in balsam. (3) Dehydrate by dipping in 70%, 95%, and absolute ethyl alcohol; immerse in xylene; cover in balsam.

DDA was made by heating 15 g. of benzidine in 150 ml. of glacial acetic acid and 450 ml. of water until dissolved, then adding water to make 750 ml. of solution. Rehydrated sections were stained 4 hours in DDA, washed, stained 5 minutes in Congo red (Congo red, 5 g.; NaOH, 5 g.; water, 100 ml.), washed, and covered in Clearcol.

An Autotechnicon was used for dehydration, clearing, infiltration, deparaffinizing sections, and staining. Procedures that necessarily remained manual were fixation in a vacuum chamber, and all operations that followed staining.

Ruthenium red, though the best available indicator for pectins, may not be specific for these substances. DDA and ruthenium red stained identical structures in hypodermis and cortex. DDA also stained cuticle, hence was more useful than ruthenium red for delineating that portion. DDA sections were better for photomicrography, and for measuring thickness of cell walls. Neither stain prevented the study of cell walls in polarized light.     

A new method for easy demonstration of argyrophil cells.

A new method for silver impregnation of endocrine cells of the gastrointestinal mucosa is described. It offers great reliability, eveness of impregnation, and, since it can be used on batches of slides, is also suitable for histology class and investigation material. The procedure for paraffin sections of formalin-fixed material is as follows: dewax and transfer to distilled water, leave in 0.5% silver nitrate solution for 2 hours at 60 C. Rinse in distilled water, then treat in Bodian developer (hydroquinone, 1 g; sodium sulphite, 5 g; distilled water, 100 ml) previously heated to 60 C. Rinse in running tap water, distilled water, and then re-impregnate for 10 minutes at 60 C in the same silver solution and reduce in Bodian's solution. Since the background is not impregnated by this method, sections may be counterstained by any basic anilin dye to bring out nuclei. A 0.1% kernechtrot solution was found very satisfactory in this respect. The granulations of argyrophil cells stand out sharply black against a red background.     

A New Method for Easy Demonstration of Argyrophil Cells

A new method for silver impregnation of endocrine cells of the gastrointestinal mucosa is described. It offers great reliability, eveness of impregnation, and, since it can be used on batches of slides, is also suitable for histology class and investigation material. The procedure for paraffin sections of formalin-fixed material is as follows: dewax and transfer to distilled water, leave in 0.5% silver nitrate solution for 2 hours at 60 C. Rinse in distilled water, then treat in Bodian developer (hydroquinone, 1 g; sodium sulphite, 5 g; distilled water, 100 ml) previously heated to 60 C. Rinse in running tap water, distilled water, and then re-impregnate for 10 minutes at 60 C in the same silver solution and reduoc in Bodian's solution. Sma the background is not impregnated by this method, sections may be counterstained by any basic anilin dye to bring out nuclei. A 0.1% kernechtrot solution was found very satisfactory in this respect. The granulations of argyrophil cells stand out sharply black against a red background.     

A Six-Dye Staining Schedule for Sections of Mesquite and Other Desert Plants

Materials are fixed in FPA (formalin, 2; propionic acid, 1; 70% ethanol, 17). Paraffin sections on slides are brought to 50% ethanol and stained as follows: (1) in Bismarck brown Y, a 0.02% solution in 0.1% aqueous phenol, 10-30 min; wash 30 sec in 0.7% acetic acid, and wash in distilled water 20-30 sec; (2) in crystal violet, 1% in 70% ethanol alkalinized with 1 drop of 1 N NaOH per 100 ml, 12-35 min; wash 30-60 sec in tap water to remove excess stain, and rinse 0.5 sec in 70% ethanol; then mordant in I₂-KI, 1% each in 70% ethanol, 40 sec, and rinse in 70% ethanol 2-5 sec; (3) in a mixture containing 0.4% acid fuchsin and 0.6% crythrosin B in 70% ethanol about 0.5 sec; rinse in 70% ethanol 5-15 sec to remove excess red; dehydrate in 70%, 95%, and absolute ethanol, 2-3 sec each; (4) in fast green FCF, 0.5% in a mixture of equal parts of methyl cellosolve, absolute ethanol, and clove oil, 5-15 sec; rinse in a mixture of clove oil, 10 ml; absolute ethanol, 100 ml; and methyl cellosolve, 10 ml, 5-7 sec; (5) in orange G, 0.75 gm in a mixture of clove oil, 40 ml; absolute ethanol, 40 ml; and methyl cellosolve, 60 ml, 5-30 sec; rinse clean in a 1:1 mixture of xylene and absolute ethanol, 5-20 sec Complete the clearing in pure xylene, 3 changes, 1.5 min in each, and apply a cover glass with synthetic resin. Slides are agitated in all steps except Bismark brown Y, crystal violet, and the xylenes. Contrast and staining intensity are adjusted by varying staining times in the dye solutions.     

Silver Staining of Nerve Fibers in Cardiac Tissue

Fresh hearts of dog were perfused through the coronary vessels with 1000 ml. of fixative (chloral hydrate, 5 g. per 100 ml. of 70% ethyl alcohol) and blocks of tissue 2 × 5 mm. from epicardium to endocardium fixed 48 hours in the same fixative. The blocks were placed in 95% alcohol containing 0.3% addition of strong ammonia for 4 hours, followed by 2 changes of plain 95% alcohol of 1 hour each, then cleared and infiltrated with paraffin. Mounted sections 12-15 µ thick were incubated in 1% silver proteinate (obtained from Serumvertrieb, Marburg, Germany)² at 38° C. for 48 hours in the presence of 10 g. of 15 gauge copper wire per 200 ml. of solution. The slides were rinsed gently in 3 changes of distilled water for 2 minutes, 1 minute and 1 minute, respectively, and reduced in 1% hydroquinone and 5% sodium sulfite for 5 minutes. They were washed 5 minutes in tap water and 5 minutes in 2 changes of distilled water and toned 3-5 minutes in 0.25% gold chloride, rinsed in distilled water 10 seconds, reduced 10 seconds in 1 % oxalic acid, rinsed 1 minute, fixed in 5% sodium thiosulfate 5 minutes, washed in tap water through 3 changes, dehydrated, cleared and covered. All solutions were made with distilled water except where otherwise specified. The results gave good impregnation of fine nerve fibers without the usual confusing staining of reticular tissue.     

Differential Staining Of Tissue In The Block With Picric Acid And The Feulgen Reaction

The authors have found a modification of the Feulgen reaction to be a satisfactory stain for tissue in the block.

Pieces of fresh mammalian tissue not thicker than 5 mm. are fixed for approximately 48 hours at 25° C. in a mixture of equal parts of 5% aqueous sulfosalicylic acid and saturated aqueous picric acid. They are washed for 30 minutes in three ten-minute changes of distilled water and placed in Feulgen's staining solution diluted to one-half strength with distilled water. The staining solution is allowed to act for 24 hours (2 to 3 mm. thick blocks) up to 48 hours for 5 mm. thickness. After staining, the specimens are transferred to a mixture of sodium bisulfite, 0.5 g. and N hydrochloric acid, 5 ml. in' 100 ml. of distilled water. Two changes of IS to 30 min. each in the acid sulfite are given and these are followed by dehydration through 50%, 70% and 95% alcohol. One to two hours are allowed for each change except the last 95%, in which the stained tissue is allowed to remain overnight. The dehydration is completed in two changes of absolute alcohol with subsequent clearing in xylene and embedding in paraffin. Sections may be cut 10 μ or other thickness desired, mounted on slides, paraffin removed, and covered in the usual manner. Nuclei stain reddish violet against a lemon yellow background when the stain is typical. Orange G, 200 mg. per 100 ml. may be added to the fixing fluid if a more polychromatic effect is desired.     

Basic Dye Counterstaining of Sections Impregnated by the Golgi-Cox Method

Celloidin blocks of Golgi-Cox impregnated material are cut at 50 μ, the sections collected in 70% alcohol, transferred to a 3:1 mixture of absolute alcohol and chloroform for 2 min, and then stored in xylene or toluene for at least 3 min, or up to 2 wk until processed further. Mounting is done on glass slides which have been coated with fresh egg albumen diluted in 0.2% ammonia water (or a 0.5% solution of dry powdered egg albumen) and then dried at 60°C overnight. For attachment to these coated slides, sections are first soaked for 2-3 min in a freshly prepared mixture of methyl benzoate, 50 ml; benzyl alcohol, 200 ml; chloroform, 150 ml; and then transferred quickly to the slides by means of a brush. After 2-3 min the chloroform evaporates and the celloidin softens. The slides are then immersed in toluene which hardens the celloidin and anchors the sections to the slides. Alcohols of descending concentrations to 40% are followed by alkalinizations, first in: absolute alcohol, 40 ml; strong ammonia water 60 ml, for 2 min, then in: absolute alcohol, 70 ml; strong ammonia water, 30 ml, for 1 hr. Excess alkali is then removed by 70% and 40% alcohol, 2 min each, and a 10 min wash in running tap water. Bleaching in 1% Na₂S₂O₃, for 10 min and washing again in tap water for 10 min completes the process preliminary to staining. The preparations are then stained for 90 min in an aqueous solution of either 0.5% cresylecht violet, neutral red, or Darrow red, buffered at pH 3.6. Dehydration and differentiation in ascending grades of alcohol, clearing with toluene or xylene, and applying a cover glass with a mounting medium having a refractive index of about 1.61 completes the process.     

A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

Basic Fuchsin-Crystal Violet; A Rapid Staining Sequence for Juxtaglomerular Granular Cells Embedded in Epoxy Resin

A basic fuchsin-crystal violet staining sequence for demonstration of juxtaglomerular granular cells in epoxy-embedded tissues is rapid and results in slides with excellent contrast and intensity. Procedure: Cut sections 0.3-0.6 μ thick. Hydrate through xylene and alcohol to water. Stain in modified Goodpasture's stain (basic fuchsin, 1; aniline, 1; phenol, 1; 30% alcohol, 100) for 20-30 sec; rinse in tap water; stain in modified Stirling's (crystal violet, 5; alcohol, 10; aniline, 2; water, 88) for 20-30 sec; rinse in tap water and dry on a hotplate; mount in a synthetic resin. Granular cells of the juxtaglomerular apparatus are stained an intense dark blue by the crystal violet. Arterial elastic membranes and collagen are pale blue. Other structures are shades of red.     

Histochemical Use Of Lead Tetra-Acetate I. Cleavage Of 1-2 Glycols

Lead tetra-acetate acts specifically to split the carbon-carbon single bond of the 1,2-glycol linkage to produce aldehyde radicals which may then be demonstrated by means of leucofuchsin, 2,4-dinitrophenlyhydrazine, or p-nitrophenylhydrazine. Routinely prepared slide sections from tissues fixed in 10% formalin are run down to 95% alcohol, rinsed in glacial acetic acid and then treated for 2 minutes in a saturated solution of lead tetra-acetate in glacial acetic acid with 5 g. of potassium acetate added for each 100 ml. of reagent. The sections are then washed in distilled water and placed in leucofuchsin for 10 minutes, or in a saturated 30% alcoholic solution of p-nitrophenylhydrazine for 5 minutes or 2,4-dini-trophenylhydrazine for 30 minutes. After staining, the sections are rinsed in 30% alcohol if the nitrophenylhydrazines were used, or in the standard dilute sulfite bath followed by running tap water for 5 minutes if leucofuchsin were used. Sections are routinely dehydrated, cleared, and covered. On examination, the sites of 1,2-glycol linkages will be stained violet by leucofuchsin or yellow by the nitrophenylhydrazines.     

A Controllable Silver Stain for Nerve Fibers and Nerve Endings

A paraffin section method is described with a yellow-brown-black color range comparable to that of Ranson's pyridine silver block stain. After impregnation with activated protargol and reduction with a fine grain photographic developer, silver nitrate impregnation and reduction are repeated as often as necessary. The procedure is as follows:

Place hydrated sections of tissue fixed in chloral hydrate (25 g. in 100 ml. of 50% alcohol) in 1% aqueous protargol (Winthrop Chemical Co.) containing 5-6 g. metallic copper for 12-24 hours. After rinsing in 2 changes of distilled water, reduce 5 to 10 minutes in: Elon (Eastman Kodak Co.) 0.2 g., Na₂SO₃, dessicated, 10 g., hydroquinone 0.5 g., sodium borate powder 0.1 g., distilled water 100 ml. Wash thoroly in 4 or 5 changes of distilled water and place in 1% aqueous AgNO₃ for 10-20 minutes at 28°-50° C. Rinse in 2 or 3 changes of distilled water and reduce in the elon-hydroquinone solution. After thoroly washing in 4 or 5 changes of distilled water, examine under microscope.

If too pale, treat again in silver nitrate for 10-20 minutes, rinse, reduce 5-10 minutes and wash thoroly until nerve fibers show distinct microscopic differentiation, then dehydrate, clear and mount.     

Differentiation of Articular and Epiphysial Cartilage, Based on Resorcin-CrystaeL Violet and Picro-Fuchsin Staining of Chondroitin Sulphate and Keratosulphate

Formalin-fixed, decalcified knee joints of young vertebrates were embedded in paraffin wax and cut at 4 μ. Sections were stained in Harris' Haematoxylin, washed in tap water, then immersed in the following staining solution for 60 min: crystal violet, 1 gm; resorcin, 2 gm; distilled water, 100 ml; boiled for 3 min, with constant stirring. After adding 30 ml of 30% FeCl₃, it was boiled for 3 min more. The solution was filtered. The precipitate was washed oil with 50 ml of distilled water and 100 ml of absolute alcohol added. This was combined with the original filtrate and boiled for 5 min. The solution was filtered once more, the precipitate discarded and 2 ml of cone. HC1 added. After cooling, the solution was ready for use. Sections were then washed briefly in tap water, stained in van Gieson's picro-fuchsin for 2 min, and differentiated as they were dehydrated and brought to Xylene. The sections were mounted in a synthetic resin (D.P.X.). Articular type cartilage stains red and growth cartilage blue.     

A Sudan Black B Myelin Stain for Peripheral Nerves

Blocks of fresh issue were fixed 2 or more days in: cobalt sulfate (or nitrate), 1 gm; distilled water, 80 ml; 10% calcium chloride, 10 ml; and formalin, 10 ml. The fixed tissue was washed thoroughly in tap water, embedded in gelatin, frozen sections cut, and mounted on slides with gelatin adhesive. The sections were stained 15-30 min in a saturated, filtered solution of Sudan black B in 70% alcohol, differentiated in 50% alcohol under microscopic observation, and a cover glass applied with glycerol-gelatin. In thick (50-100 μ) sections, myelin stained green to gray-green and this allowed easy differentiation between nerves and other tissue elements.     

Permanent Mounts Of Chromosomes After 8-Oxyquinoline and Squashing

Fresh young root tips or free-hand cross sections thereof were placed in 0.002 M 8-oxyquinoline (aq.) at 10-14^oC. for 3 hours. After rinsing in water 1-2 minutes, they were soaked in N HC1 at 55^oC. for 25 minutes, rinsed again and squashed under a cover glass on a dry slide. Slide and cover glass were separated by placing in 70% alcohol and allowed to remain therein at least 0.5 hour after separation. Both slide and cover glass were passed through 50% and 30% alcohol to water and stained by the Feulgen procedure (without further hydrolysis) or with crystal violet after mordanting in 1% chromic acid overnight and washing in running water 3-4 hours. Dehydration and mounting in balsam completed the process. The smear on the slide was covered with a clean cover glass and the cover glass, bearing stained material, mounted separately.     

A Urea Silver Nitrate Method for Nerve Fibers and Nerve Endings

A silver nitrate stain for nerve fibers and endings applicable to paraffin sections on the slide utilizes the properties of urea to accelerate the procedure and improve the specificity of the stain. After removal of the paraffin the sections are run through absolute, 95% and 80% alcohol and placed for 60-90 minutes at 50-60°C. in: 1% aqueous silver nitrate, 100 ml.; urea, 20-30 g.; 1g. mercuric cyanide and 1 g. picric acid in 100 ml. of distilled water, 1-3 drops. After the silver bath they are rinsed quickly in 2 changes of distilled water and reduced for 3-5 minutes at 25-30°C. in: water, 100 ml.; sodium sulfite, anhydrous, 10g.; hydroquinone, 1-2g.; urea, 20-30g. They are then washed thoroughly in 4-5 changes of distilled water, passed through graded alcohols into 80% alcohol and examined under the microscope. If nerve fibers are not distinct, the sections are returned to the same urea-silver-nitrate bath for 10-15 minutes, rinsed, reduced, washed and dehydrated as before. This process may be repeated until staining is adequate; then they are dehydrated, cleared, and mounted.

Nerve fibers show a color range from brown to black; nerve cells from yellow to brown; and the background, depending on the type of tissue and its fixation, from yellow to light brown.     

Improved Nuclear Staining with Mordant Blue 3 as A Hematoxylin Substitute

For progressive staining 1 g mordant blue 3, 0.5 g iron alum and 10 ml hydrochloric acid are combined to make 1 liter with distilled water. Paraffin sections are stained 5 minutes, blued in 03% sodium acetate for 30 seconds and counterstained with eosin. For regressive staining, 1 g dye, 9 g iron alum and 50 ml acetic acid are combined to make 1 liter with distilled water. Staining time is 5 minutes followed by differentiation in 1% acid alcohol and blueing in 0.5% sodium acetate. Counterstain with eosin. In both cases results very closely resemble a good hematoxylin and eosin.     

Use of Gallocyanin as a Myelin Stain for Brain and Spinal Cord

Tissue fixed in 10% formalin, formol saline, CaCO₃ or phosphate buffer neutralized formalin, Baker's formol calcium, Cajal's formol ammonium bromide, formalin-95% ethanol 1:9, formalin-methanol 1:9, Lillie's methanol-chloroform or Salthouse's formol cetyltrimethylammonium bromide was dehydrated and embedded in paraffin. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 22-25 C. Mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. Myelin was stained in a gallocyanin self-differentiating solution for 1-2.5 hr; thick sections requiring the longer time. The staining solution (pH approximately 7.4) consisted of Na₂CO₃, 90 mg; distilled water, 100 ml; gallocyanin, 250 mg; and ethanol, 5 ml. The ethanol was added to this mixture last, and after the other ingredients had been boiled and then cooled to room temperature. After a staining and thorough washing, Nissl granules were stained for 5-10 min in a solution consisting of: 0.1 M acetic acid, 60 ml; 0.1 M sodium acetate, 40 ml; methyl green, 500 mg. Washing, dehydration, clearing and mounting completed the process. Myelin sheaths were stained dark violet; neuronal nuclei, light green with dark granules of chromatin; nucleoli of motor cells and erythrocytes, dark violet; cytoplasm, green with dark green Nissl granules. The simple and reliable method can be adapted easily for use with automatic tissue processors.