Affinity chromatography of peptidylarginine deiminase from rabbit skeletal muscle on a column of soybean trypsin inhibitor (Kunitz)-Sepharose

We designed a simple procedure for the purification of peptidylarginine deiminase, which catalyzes the deimination of arginyl residues in protein, from rabbit skeletal muscle using substrate affinity chromatography. Of the immobilized substrate ligands tested, i.e. protamine and soybean trypsin inhibitor (Kunitz) (STI), STI-Sepharose was found to be an effective affinity adsorbent for purification of the enzyme. The specific binding of peptidylarginine deiminase to STI-Sepharose was observed in the presence of calcium ion, and the enzyme could be selectively eluted from the affinity adsorbent by washing with chelator. A 1,800-fold purification with a 50% yield was achieved in the three-step procedure, which involved DEAE-Sephacel ion-exchange and STI-Sepharose affinity chromatography. The purified enzyme was homogeneous on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The specific activity and the recovery were considerably higher than have been obtained by any procedures previously reported. The specific interaction of peptidylarginine deiminase with STI immobilized on Sepharose was also investigated quantitatively by frontal affinity chromatography. In this method, a peptidylarginine deiminase solution was applied continuously to an STI-Sepharose column and the retardation of the elution front was measured as a parameter of the strength of the interaction. The dissociation constant for the enzyme with STI was found to be 2.3 X 10(-7)M. This value was in good agreement with that obtained by kinetic analysis in our previous studies. Peptidylarginine deiminase required millimolar Ca2+ for the binding to STI-Sepharose. The Ca2+ dependence of the enzyme binding was quite similar to that of the enzymatic activity.(ABSTRACT TRUNCATED AT 250 WORDS)     

One step purification of D-galactose and L-arabinose kinases from Phaseolus aureus seedlings by ATP-sepharose affinity chromatography.

8-β-Aminoethylthio-adenosine triphosphate has been synthesized as an ATP derivative and was successfully coupled with N-hydroxysuccinate ester sepharose. The bounded ATP analog can be used on affinity chromatography as a specific substrate ligand for the purification of kinases by means of enzyme substrate binding interaction. Both solubilized and membrane-bound d-galactokinase and l-arabinokinase extracted from mung bean seedlings were immobilized on the ATP-sepharose gel and purified by elution either with a high ionic strength solution (1 m NaCl) or high concentration of a second substrate.     

Enzyme immobilization via monoclonal antibodies I. Preparation of a highly active immobilized carboxypeptidase A

A novel method for the preparation of highly active immobilized enzymes is described. It is based on the binding of enzymes to suitable carriers via monoclonal antibodies, which bind to the enzyme with high affinity without affecting its catalytic activity. The applicability of the method forwarded has been illustrated by the preparation of two samples of highly active immobilized carboxypeptidase A (CPA) preparations as follows: A mouse monoclonal antibody (mAb 100)to CPA that binds to the enzyme with a high-affinity constant without affecting its catalytic activity was prepared, purified, and characterized. Covalent binding of this monoclonal antibody to Eupergit C (EC) or noncovalent binding to Sepharose-protein A (SPA)yielded the conjugated carriers EC-mAb and SPA.mAb, respectively, which reacted specifically with CPA to give the immobilized enzyme preparations EC-mAb.CPA and SPA.mAb.CPA displaying full catalytic activity and improved stability. At pH 7.5 and a temperature range of 4-37 degrees C an apparent binding constant of approximately 10(8)M(-1) characterizing the interaction of CPA with EC-mAb and SPA.mAb, was obtained. To compare the properties of EC-mAb.CPA and SPA.mAb.CPA with those of immobilized CPA preparations obtained by some representative techniques of covalent binding of the enzyme with a corresponding carrier, the following immobilized CPA preparations were obtained and their properties investigated: EC-CPA (I), a preparation obtained by direct binding of EC with CPA; EC-NH-GA-CPA (II), a derivative obtained by covalent binding of CPA to aminated EC via glutaraldehyde; EC-NH-Su-CPA (III), a CPA derivative obtained by binding the enzyme to aminated EC via a succinyl residue; and EC-HMD-GA-CPA (IV), obtained by binding the enzyme via glutaraldehyde to a hexamethylene diamine derivative of EC. Full enzymic activity for all of the bound enzyme, such as that recorded for the immobilized CPA preparations EC-mAb.CPA and SPA.mAb.CPA, was not detected in any of the insoluble covalently bound enzyme preparations.     

Glucose oxidase as label in histological immunoassays with enzyme-amplification in a two-step technique: coimmobilized horseradish peroxidase as secondary system enzyme for chromogen oxidation

A sensitive staining procedure for glucose oxidase (GOD) as marker in immunohistology is described. The cytochemical procedure involves a two-step enzyme method in which GOD and horseradish peroxidase (HRP) are coimmobilized onto the same cellular sites by immunological bridging or by the principle of avidin-biotin interaction. In this coupled enzyme technique, H2O2 generated during GOD reaction is the substrate for HRP and is utilized for the oxidation of chromogens such as 3,3'-diaminobenzidine or 3-amino-9-ethylcarbazole. Due to the immobilization of the capture enzyme HRP in close proximity to the marker enzyme (GOD), more intense and specific staining is produced than can be obtained with soluble HRP as coupling enzyme in the substrate medium. Indirect antibody labelled and antibody bridge techniques including the avidin (streptavidin)-biotin principle have proven the usefulness of this GOD labelling procedure for antigen localization in paraffin sections. Antigens such as IgA in tonsil, alpha-fetoprotein in liver and tissue polypeptide antigen in mammary gland served as models. The immobilized two-step enzyme procedures have the same order of sensitivity and specificity as comparable immunoperoxidase methods. The coupled GOD-HRP principle can be superior to conventional immunoperoxidase labelling for the localization of biomolecules in tissue preparations rich in endogenous peroxidase activities.     

Enzyme-amplified rate conductimetric immunoassay

A new immunoassay technique based on measurement of conductance changes in solutions is described. The assay employs an immobilized monoclonal antibody to capture a protein analyte along with a second antibody to the same analyte, conjugated to an enzyme capable of producing ions which are measured conductimetrically. Urease was selected as the enzyme, because it produces, from urea, four ions for each catalytic event. The analyte studied was human chorionic gonadotropin in serum. Higher concentrations of analyte during incubation with immobilized antibody and antibody-urease conjugate led to increased binding of the latter. After removal of unbound conjugate, urea solution was added and the rate of conductance change measured in the bulk substrate solution. Experiments, performed in polystyrene microtiter wells using a specially designed electrode, demonstrated the ability to measure 30 picomolar concentrations of human chorionic gonadotropin with a 30-s rate measurement. Urease proved to be an excellent labeling enzyme, retaining its activity under the nonionic conditions necessary to maintain low background conductance. Good agreement was obtained between observed rates and those expected from conductimetric theory and known physical parameters. The potential utility of the conductimetric immunoassay lies in the fabrication of biosensor devices for simplification and cost reduction of immunochemical-based instrumentation. Further improvements to the technique are proposed to achieve lower detection limits.     

Reversible denaturation of carbonic anhydrase provides a method for its adsorptive immobilization

Palmityl-substituted sepharose 4B has been used for adsorptive immobilization of heat-denatured carbonic anhydrase. The native form of this enzyme does not show any affinity for binding to this hydrophobic support. However, through the process of denaturation-renaturation performed by heating and subsequent cooling of an enzyme solution in the presence of the matrix, it was possible to obtain a catalytically active immobilized preparation, which was used successfully in continuous catalytic transformations. It is suggested that this simple procedure may provide a convenient method of immobilization for proteins, which are not normally adsorbed on hydrophobic supports.     

Automated assay of creatinine in serum as simplified by the use of immobilized enzymes, creatinine deiminase, and glutamate dehydrogenase

A method for the automated analysis of creatinine in serum using immobilized enzymes in column form which does not require a blank correction and can be run in a single buffer of pH 7.5 is described. The method was based on the determination of ammonia formed by the action of creatinine deiminase. Endogenous ammonia in serum was removed by an immobilized glutamate dehydrogenase column prior to the action of creatinine deiminase also immobilized and used in column form. The present method was found to give perfect linearity of the data up to 0.10 g creatinine/liter with satisfactory precision, reproducibility, and accurate reaction recoveries. The immobilized enzyme reactor unit showed good operational stability for a 2-month period, during which time it was repeatedly used for analyses over 2000 times. The results correlated satisfactorily with those obtained by other well-established methods.     

A general solution for the steady-state kinetics of immobilized enzyme systems

A power series solution is presented which describes the steady-state concentration profiles for substrate and product molecules in immobilized enzyme systems. Diffusional effects and product inhibition are incorporated into this model. The kinetic consequences of diffusion limitation and product inhibition for immobilized enzymes are discussed and are compared to kinetic behavior characteristic of other types of effects, such as substrate inhibition and substrate activation.     

Study of substrate-enzyme interaction between immobilized pyridoxamine and recombinant porcine pyridoxal kinase using surface plasmon resonance biosensor

Pyridoxal kinase (PK) is an important enzyme involved in bioactivation of vitamin B(6). Binding of PK with its substrate is the prerequisite step for the subsequent catalytic phosphorylation of the substrate. In the present study, a surface plasmon resonance biosensor (BIAcore) was employed to characterize the binding interaction between wild-type porcine PK and an immobilized substrate, pyridoxamine. Pyridoxamine was modified with 11-mercaptoundecanic acid and immobilized on a sensor chip through the formation of a self-assembled monolayer. The binding of PK to the immobilized pyridoxamine was followed in real time and the kinetic parameters were derived from non-linear analysis of the sensorgram. The effects of buffer pH, monovalent cations (Na(+), K(+)) and divalent cations (Mn(2+), Zn(2+), Mg(2+)) on the binding kinetics were determined. Optimal pH for PK-pyridoxamine interaction in the absence of divalent ions is at around 7.4. While K(+) increased and Na(+) decreased the binding affinity (K(A)) of PK to immobilized pyridoxamine, all divalent cations increased the K(A) of PK for pyridoxamine. Solution phase affinity measurement based on a competitive binding assay was used to determine the affinities of PK for different vitamin B(6) analogues. The order of affinity of PK for different analogues is: pyridoxal-oxime>pyridoxine>pyridoxamine>pyridoxal>pyridoxal phosphate. This is the first study to demonstrate that buffer conditions such as pH and concentration of monovalent and/or divalent ions can directly alter the binding of PK for its substrates. The quantitative kinetic and thermodynamic parameters obtained by SPR measurement provide the insight information into the catalytic activity of this enzyme.     

Studies of substrate-induced conformational changes in human cytomegalovirus protease using optical biosensor technology

The interaction between human cytomegalovirus (HCMV) protease and a peptide substrate was studied using a surface plasmon resonance (SPR)-based biosensor. Immobilization of the enzyme to the sensor chip surface by amine coupling resulted in an active enzyme with a higher catalytic efficiency than the enzyme in solution, primarily due to a lower K(m) value. The interaction between immobilized protease and substrate was characterized by a biphasic SPR signal. Rate constants for the formation of the initial enzyme-substrate complex could be determined from the sensorgrams. Simulated binding curves based on the determined k(cat) and the rate constants indicated that the complex binding signal did not originate from the accumulation of intermediates in the catalytic reaction. By chemical crosslinking of the immobilized HCMV protease, which was shown to limit the enzyme's structural flexibility, it was revealed that the obtained sensorgrams were composed of a signal caused by substrate binding and considerable structural alterations in the immobilized enzyme. Furthermore, HCMV protease was inactivated by chemical crosslinking, indicating that structural flexibility is essential for this enzyme. Parallel experiments with immobilized alpha-chymotrypsin revealed that it does not undergo similar conformational changes on peptide binding and that crosslinking did not inactivate the enzyme. The simultaneous detection of binding and conformational changes using optical biosensor technology is expected to be of importance for further characterization of the enzymatic properties of HCMV protease and for identification of inhibitors of this enzyme. It can also be of use for studies of other flexible proteins.     

Distribution of heparinase covalently immobilized to agarose: Experimental and theoretical studies

An immobilized enzyme reactor has been developed to remove heparin, the anticoagulant that is required in all extracorporeal devices for patients undergoing open-heart surgery or kidney dialysis. The device uses the enzyme heparinase (EC 4.2.2.7), which is covalently linked to agarose with cyanogen bromide. A critical parameter in the development of a model for the degradation of heparin catalyzed by immobilized heparinase is the radial concentration profile of the enzyme within the agarose matrix. Experimental determinations of bound enzyme con centrations have been conducted previously for several enzyme systems using radioactive or fluorescent labels. For the development of the heparinase reactor it is necessary to use catalytically but not electrophoretically pure enzyme, and thus it is not possible to use the labeling techniques. To obtain information about the bound enzyme distribution, an experimental study of the intrinsic binding kinetics of heparinase to cyanogen bromide-activated agarose was conducted. The binding reaction was studied as a function of both the concentration of heparinase and the gel-reactive group. At conditions of functional group excess, the binding kinetics were pseudo first order in heparinase concentration with a rate constant equal to 0.12 C(c[triple chemical bond]n) (h(-1)), where C(c[triple chemical bond]n) is the gel-reactive group concentration. The reactive group concentration remained constant within the 2-4-h experiments. Competitive binding between heparinase and the protein contaminants was unimportant. A model was formulated for the immobilization procedure based on the diffusion of heparinase within the porous network and the binding kinetics as determined above. The model predicted the immobilization of heparinase to be kinetically controlled and the enzyme to distribute uniformly within the agarose matrix. These experimental techniques could be applied to predict the immobilized enzyme distribution for different enzyme systems that are not electrophoretically pure.     

Antibody-antigen complex formation with immobilized immunoglobulins.

We have investigated the complex formation between an immobilized monoclonal antibody and antigens that differ in size about 50-fold. As a model system, we used an iodinated progesterone derivative and a progesterone-horseradish peroxidase conjugate as tracer and a monoclonal antibody as binding protein. The antibody was immobilized by four different methods: physical adsorption, chemical binding, and binding via protein G in the absence or presence of a protective protein (gelatin). These investigations have shown that the performance of competitive immunoassays is determined by a combination of factors: (a) the relative size of the analyte and the tracer, (b) the antibody density on the solid matrix, (c) the method of immobilization of the antibody, and (d) the binding constants between antibody-analyte and antibody-tracer. All of these interactions have to be considered in designing an optimal immunoassay. The smaller antigen can form a 3- to 35-fold higher maximal complex density than the larger antigen. Dose-response curves are less affected by the size of the tracer than by the binding constant with the antibody. A large enzyme tracer with a relatively low binding constant can, therefore, provide a more sensitive assay. On the other hand, the increase in complex density achieved with a smaller tracer yields a higher signal that in turn can provide a better signal-to-noise ratio in highly sensitive competitive solid-phase immunoassays. We have suggested a model for antibody immobilization that accounts for the interdependence of tracer size, complex formation, and antibody density. The methods described can be used to design and optimize immunoassays of predefined performance characteristics. The results are particularly useful for converting radioimmunoassays to enzyme immunoassays.     

Quantitative assay of hepatitis B surface antigen by using surface plasmon resonance biosensor

We performed a basic experiment for the rapid, on-line, real-time measurement of hepatitis B surface antigen using a surface plasmon resonance biosensor. We immobilized anti-HBsAg (hepatitis B surface antigen) polyclonal antibody, as a ligand, to the dextran layer on a CM5 chip surface that had previously been activated byN-hydroxysuccinimide. A sample solution containing HBsAg was fed through a microfluidic channel, and the reflecting angle change due to the mass increase from the binding was detected. The binding characteristics between HBsAg and its polyclonal antibody followed the typical monolayer adsorption isotherm. When the entire immobilized antibody had interacted, no additional, non-specific binding occurred, suggesting the immunoreaction was very specific. The bound antigen per unit mass of the antibody was independent of the immobilized ligand density. No significant steric hindrance was observed at an immobilization density of approximately 17.6 ng/mm². The relationship between the HBsAg concentration in the sample solution and the antigen bound to the ligand was linear up to ca. 40 μg/mL. This linearity was much higher than that of the ELISA method. It appeared the antigen-antibody binding increased as the immobilized ligand density increased. In summary, this study showed the potential of this SPR biosensor-based method as a rapid, simple and multi-sample on-line assay. Once properly validated, it may serve as a more efficient method for HBsAg quantification for replacing the ELISA.     

A rapid competitive binding nonseparation electrochemical enzyme immunoassay (NEEIA) test strip for microcystin-LR (MCLR) determination

A competitive binding nonseparation electrochemical enzyme immunoassay (NEEIA) is described for the determination of microcystin-LR (MCLR) using a double-sided microporous gold electrode in cartridge-type cells. A gold film sputtered on one side of porous nylon membrane constitutes a working electrode, while another gold film formed on the opposite side serves as a pseudo reference electrode. After immobilizing MCLR antibody on working electrode by physical adsorption, the double-sided electrode was placed simply in a diffusion U-type or within a dry strip-type cell with a conjugate pad pre-loaded with a glucose oxidase labeled MCLR (GOx-MCLR) on working electrode side. Assays were performed in two steps: an MCLR-containing sample mixed with a known amount of GOx-MCLR conjugate either in buffer solution or in pre-loaded dry pad was incubated for an appropriate period (about 10 min) to induce competitive reaction with an immobilized anti-MCLR antibody on working electrode, and a fixed concentration of glucose solution (substrate) was then added to the backside of the working electrode. Due to the competitive nature of the assay, enzymatically generated product, hydrogen peroxide (H2O2), was detected at the working gold electrode (at +800 mV versus Au) by oxidation, and the magnitude of amperometric current was inversely proportional to the concentration of MCLR in the sample. The response time after substrate addition was about 30s. Mean recovery of MCLR added to tap water was 93.5%, with a coefficient of variation (CV) of 6.6%. The proposed competitive NEEIA system is in general comparable to existing heterogeneous enzyme immunoassays with a similar detection limit (100 pg/mL MCLR), and suitable for developing a disposable type biosensor for on-site monitoring of environment.     

Glucose oxidase as label in histological immunoassays with enzyme-amplification in a two-step technique: coimmobilized horseradish peroxidase as secondary system enzyme for chromogen oxidation

Summary A sensitive staining procedure for glucose oxidase (GOD) as marker in immunohistology is described. The cytochemical procedure involves a two-step enzyme method in which GOD and horseradish peroxidase (HRP) are coimmobilized onto the same cellular sites by immunological bridging or by the principle of avidin-biotin interaction. In this coupled enzyme technique, H₂O₂ generated during GOD reaction is the substrate for HRP and is utilized for the oxidation of chromogens such as 3,3-diaminobenzidine or 3-amino-9-ethylcarbazole. Due to the immobilization of the capture enzyme HRP in close proximity to the marker enzyme (GOD), more intense and specific staining is produced than can be obtained with soluble HRP as coupling enzyme in the substrate medium. Indirect antibody labelled and antibody bridge techniques including the avidin (streptavidin)-biotin principle have proven the usefulness of this GOD labelling procedure for antigen localization in paraffin sections. Antigens such as IgA in tonsil, alpha-feroprotein in liver and tissue polypeptide antigen in mainmary gland served as models. The immobilized twostep enzyme procedures have the same order of sensitivity and specificity as comparable immunoperoxidase methods. The coupled GOD-HRP principle can be superior to conventional immunoperoxidase labelling for the localization of biomolecules in tissue preparations rich in endogenous peroxidase activities.     

Flow analysis for determination of paraoxon with use of immobilized acetylcholinesterase reactor and new type of chemiluminescent reaction

A highly sensitive flow analysis method for determination of acetylcholinesterase (AChE) inhibitors like organophosphorous pesticides using a new chemiluminescent reaction was developed and optimized. This method is fast, sensitive, and cheap, because it requires only one enzyme and its substrate. The system incorporates a reactor with immobilized AChE on controlled pore glass (CPG) and a chemiluminometric detector. Variations in enzyme activity due to inhibition are measured from the changes of concentrations of thiocholine produced when the substrate (acetylthiocholine chloride) is pumped before and after the passage of the solution containing the pesticide through the immobilized AChE reactor. Thiocholine is determined by a new chemiluminescent reaction with luminol in the presence of potassium ferricyanide. The percentage inhibition of enzyme activity is correlated to the pesticide concentration. The inhibited enzyme is reactivated by 10 mM pyridine-2-aldoxime methiodide (2-PAM). The experimental conditions were first optimized for activity determination of the effect of pH, flow rates, and Tris concentrations. For the measurement of AChE inhibition, the appropriate concentration of the substrate is selected such that the rate of noninhibited reaction can be considered unchanged and could be used as a reference. For optimization of experimental conditions for inhibition, several parameters of the system are studied and discussed: flow rate, enzyme-pesticide contact time, luminol concentration, ferricyanide concentration, 2-PAM concentration, and configuration of the FIA manifold. Paraoxon, an organophosphorous pesticide was tested. For an inhibition time of 10 min the calibration graph is linear from 0.1 to 1 ppm paraoxon with a relative standard deviation (n = 5) of 4.6% at 0.5 ppm. For an inhibition time of 30 min the calibration graph is linear from 25 to 250 ppb paraoxon.     

尼龙固定化木瓜蛋白酶及其应用研究

 尼龙经CaCl_2和H_2O的甲醇溶液处理,稀HCl水解用戊二醛交联以制备固定化木瓜蛋白酶。在溶液酶浓度为1mg/mL pH7.5—8.0、4—15℃条件下固定3h,活力回收42.5％,相对活力46％,偶联效率52％,半衰期72天。溶液酶Km值和固定化酶K_m~(aPP)值(底物酪蛋白W/V,％)分别为0.28％和0.35％。溶液酶和固定化酶分别在pH6.5和pH8.0以下活力稳定;最适pH分别为7.0和8.0;在65℃处理30min活力分别为原有活力的89％和66％。当酪蛋白浓度为1.5％和2.5％以上活力分别受到抑制。固定化酶在6mol/L脲中连续浸洗5次共6h其活力稳定,仍有原活力的44.4％;用以处理啤酒浊度比对照下降了2-11倍;蛋白质含量下降了55％;冷藏(4℃)120天,无冷混浊发生;同时各项理化指标和风味不变。     

Investigation of kinetics of immobilized liver esterase by flow calorimetry

Flow calorimetry (FC) was shown to be a powerful tool for investigation of the kinetics of phenyl acetate hydrolysis catalyzed by pig liver carboxyl esterase. The enzyme was immobilized in alginate gel particles that were placed in a calorimetric flow column and the heat effect of enzyme reaction was followed in single flow and total recirculation conditions. It was shown that the registered temperature change was proportional to molar amount of substrate transformed in the column. A mathematical model describing the enzyme reaction, mass transfer, and heat effects in the calorimetric system was developed and used for the kinetic data evaluation. By combining data from single flow and recirculation modes true kinetic parameters were evaluated by the proposed mathematical procedure based on the model solution and successive approximations.

The kinetic data for carboxyl esterase showed a slide substrate inhibition by phenyl acetate. The obtained kinetic parameters were as follows: Michaelis constant K_m=2 mmol dm⁻³ and substrate inhibition constant K_i=42 mmol dm⁻³. The method can be applied to kinetic study of immobilized enzymes directly in the flow calorimeter without any requirement of an independent analytical technique.     

Fabrication of a sensing module using micromachined biosensors

Micromachining is a powerful tool in constructing micro biosensors and micro systems which incorporate them. A sensing module for blood components was fabricated using the technology. The analytes include glucose, urea, uric acid, creatine, and creatinine. Transducers used to construct the corresponding sensors were a Severinghaus-type carbon dioxide electrode for the urea sensor and a Clark-type oxygen electrode for the other analytes. In these electrodes, detecting electrode patterns were formed on a glass substrate by photolithography and the micro container for the internal electrolyte solution was formed on a silicon substrate by anisotropic etching. A through-hole was formed in the sensitive area, where a silicone gas-permeable membrane was formed and an enzyme was immobilized. The sensors were characterized in terms of pH and temperature dependence and calibration curves along with detection limits. Furthermore, the sensors were incorporated in an acrylate flow cell. Simultaneous operation of these sensors was successfully conducted and distinct and stable responses were observed for respective sensors.     

An ISFET-based immunosensor for the detection of beta-Bungarotoxin

An ion-sensitive field effect transistor (ISFET)-based immunosensor was developed to detect/quantitate beta-Bungarotoxin (beta-BuTx), a potent presynaptic neurotoxin from the venom of Bungarus multicinctus. A murine monoclonal antibody (mAb 15) specific to beta-BuTx was immobilized onto silicon nitride wafers after silanization and activation with glutaraldehyde. A chip based enzyme linked-immunosorbantassay (ELISA) was performed to ascertain antigen binding to the immobilized antibody. To develop an electrochemical immunosensing system for the detection/quantitation of beta-BuTx, an ISFET was used as a solid phase detector. MAb 15 was immobilized on the gate region of the ISFET. The antigen antibody reaction was monitored by the addition of urease conjugated rabbit anti-beta-BuTx antibodies. The sensor can detect toxin level as low as 15.6 ng/ml. The efficacy of the sensor for the determination of beta-BuTx from B. multicinctus venom was demonstrated in mouse model. Toxin concentration was highest at the site of injection (748.0+/-26 ng/ml) and moderate amount was found in the plasma (158.5+/-13 ng/ml).