Flocculation of Aspergillus terreus with polyelectrolyte complex and production of itaconic acid with the flocculated mycelia

Mycelia from Aspergillus terreus K 26 were flocculated with a polyelectrolyte complex consisting of potassium poly9vinyl alcohol) sulfate (KPVS) and poly(diallyldimethyl-ammonium chloride) (PDDA) by three different methods: (a) PDDA was added into the broth obtained from precultivation of the hyphal inoculum in the presence of KPVS; (b) use of KPVS and PDDA was reversed from that in method a; (c) after the precultivation in the absence of the polymer, the mycelia were harvested, dispersed in 0.1 M phosphate buffer containing PDDA, then flocculated by addition of KPVS. The three types of the flocculated mycelia were investigated concerning growth and itaconic acid production in shake flask cultures. Viscosity and sedimentation were further examined to characterize the flocculated mycelial broths. A slight inhibition caused by flocculation on growth and acid production was observed at the beginning of repeated cultivation, but this was eliminated when cultivation in the fresh medium was repeated. There was no marked difference in the specific rates of acid production between fre and flocculated cells. Viscosity of the flocculated mycelial system was close to that of the medium, even while maintaining a cell concentration of 2 g/dl. The poor sedimentation of mycelia was favorably imporved with these flocculation methods, especially with methods b and c.     

Immobilization of Nitrosomonas europaea cells with polyelectrolyte complex

Cell immobilization with polyelectrolyte complex prepared from strongly polyacidic and polybasic ions was investigated for cells from Nitrosomonas europaea (ATCC 25978). Trimethylammonium glycol chitosan (TGCI) and potassium poly(vinyl-alcohol) sulfate (KPVS) were used. The immobilization was carried out by directly mixing both polymer solutions with the culture broth: An excess of TGCI was first added to the culture broth to aggregate the cells, and then KPVS was added to form the complex with the excess TGCI and to entrap the aggregates with the resulting complex. From physiocochemical studies on the cell aggregation, the mechanism can be interpreted in terms of the adsorption of polyion caused by the salt linkages of the ionizable groups on the cell surface. The result of an electron microscopic observation showed that the cells are situated in the pores and on the surface of the complex support. When the immobilized cells were incubated in a medium buffered by phosphate and containing ammonium sulfate, a considerable amount of nitrite was formed; this was shown to be caused by the entrapped cells and also those cells released from the support and grown in the medium. The ammonia-oxidizing activity was retained even after a total of 200 h of incubation in a batch reactor. No deformation of the complex support was observed.     

Use of polyelectrolyte complex-stabilized calcium alginate gel for entrapment of beta-amylase

Calcium alginate gel stabilized with a polyelectrolyte complex (PEC) consisting of potassium poly(vinyl alcohol) sulfate (KPVS) and trimethylammonium glycol chitosan iodide (TGCI) was used for the immobilization of beta-amylase. The immobilization was made by gelling aqueous droplets of enzyme solution including both sodium alginate and KPVS in a CaCl(2) solution containing TGCI. The activity of the enzyme entrapped into the stabilized gel beads was evaluated by studying the batch reaction kinetics of enzyme-catalyzed hydrolysis of maltotetraose. Repeated kinetic measurements, totaling 18, were carried out at fixed time intervals. After each measurement the beads were stirred for 1 day in a freshly prepared 10 mM NaCl solution at 3 degrees C. It was found that the immobilized system remained stable without leading to a serious loss of the activity or to a large leakage of the enzyme from the support. This was explained as being due to a PEC-crosslinked contracted network structure of the stabilized gel matrix.     

Coimmobilization of Nitrosomonas europaea and Paracoccus denitrificans cells using polyelectrolyte complex-stabilized calcium alginate gel

Calcium alginate gel (CAG) that withstands phosphate ions in the medium was prepared by reinforcing a network structure of the gel with a polyelectrolyte complex (PEC) consisting of potassium poly(vinyl alcohol) sulfate and trimethylammonium glycol chitosan iodide. The PEC-stabilized CAG beads were used as a supporting matrix for the coimmobilization of Nitrosomonas europaea ATCC 25978 cells and Paracoccus denitrificans IFO 12442 cells. The coimmobilized cells were aerobically cultured on a medium containing 3 mM of phosphate ions, using (NH₄)₂SO₄ as a substrate and ethanol as a carbon source. Ammonia was consumed without forming nitrite, indicating the concurrence of nitrification and denitrification in the same system. No breakage of the gel beads was observed during the cultivation. Repeated aerobic cultivation using a column packed with beads of coimmobilized cells had stable initial activity for at least one month.     

Encapsulation of recombinant <Emphasis Type="Italic">E. coli</Emphasis> expressing cyclopentanone monooxygenase in polyelectrolyte complex capsules for Baeyer–Villiger biooxidation of 8-oxabicyclo[3.2.1]oct-6-en-3-one

Recombinant Escherichia coli cells, over-expressing cyclopentanone monooxygenase activity, were immobilized in polyelectrolyte complex capsules, made of sodium alginate, cellulose sulfate, poly(methylene-co-guanidine), CaCl₂ and NaCl. More than 90% of the cell viability was preserved during the encapsulation process. Moreover, the initial enzyme activity was fully maintained within encapsulated cells while it halved in free cells. Both encapsulated and free cells reached the end point of the Baeyer–Villiger biooxidation of 8-oxabicyclo[3.2.1]oct-6-en-3-one to 4,9-dioxabicyclo[4.2.1]non-7-en-3-one at the same time (48 h). Similarly, the enantiomeric excess above 94% was identical for encapsulated and free cells.     

Immobilization of Kluyveromyces marxianus cells containing inulinase activity in open pore gelatin matrix: 1. Preparation and enzymatic properties

Kluyveromyces marxianus cells with inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7) activity have been immobilized in open pore gelatin pellets with retention of > 90% of the original activity. The open pore gelatin pellets with entrapped yeast cells were obtained by selective leaching out of calcium alginate from the composite matrix, followed by crosslinking with glutaraldehyde. Enzymatic properties of the gelatin-entrapped cells were studied and compared with those of the free cells. The immobilization procedure did not alter the optimum pH of the enzymatic preparation; the optimum for both free and immobilized cells was pH 6.0. The optimum temperature of inulin hydrolysis was 10°C higher for immobilized cells. Activation energies for the reaction with the free and immobilized cells were calculated to be 6.35 and 2.26 kcal mol^?1, respectively. K_m values were 8 mM inulin for the free cells and 9.52 mM for the immobilized cells. The thermal stability of the enzyme was improved by immobilization. Free and immobilized cells showed fairly stable activities between pH 4 and 7, but free cell inulinase was more labile at pH values below 4 and above 7 compared to the immobilized form. There was no loss of enzyme activity of the immobilized cells on storage at 4°C for 30 days. Over the same period at room temperature only 6% of the original activity was lost.     

Continuous production of homopolynucleotides by immobilized polynucleotide phosphorylase

A polynucleotide phosphorylase was immobilized with glutaraldehyde, via an aminopropyl spacer, on porous glass. The specific activity of the immobilized enzyme was effectively increased by the addition of an appropriate ribonucleoside diphosphate on immobilization.A homopolynucleotide could be synthesized continuously by passing a nucleoside diphosphate solution through the immobilized enzyme column. The chain length of the product depended upon the temperature and the flow rate. Polyinosinic acid, poly(I), was continuously synthesized with the immobilized enzyme for about one month without appreciable loss of activity.Polyinosinic acid-polycytidylic acid, poly(I)·poly(C), prepared from poly(I) and poly(C) synthesized with the immobilized polynucleotide phosphorylase, induced interferon-β (IFN-β) in human cultured cells as effectively as that prepared from homopolynucleotides synthesized with the free enzyme.     

Factors affecting the production of prednisolone by immobilization of Bacillus pumilus E601 cells in poly(vinyl alcohol) cryogels produced by radiation polymerization

To increase the yield percent of prednisolone from hydrocortisone (cortisol), Bacillus pumilus E601 (a radioresistant microorganism) was incorporated into poly(vinyl alcohol) (PVA) cryogel grafted with hydroxyethyl-methacrylate (HEMA) as a crosslinking agent. The polymer was prepared by a radiation polymerization technique at 20 kGy from Co-60 source. The optimum temperature for the biotransformation of hydrocortisone by free cells, poly(PVA)/HEMA, and poly(PVA)/HEMA /N-isopropylacrylamide (N-IPAAm) was 30 °C. The highest yield % of prednisolone was obtained by immobilization of the cells on poly(PVA/HEMA), the addition of N-IPAAm to poly(PVA/HEMA) protected the immobilized cells from temperatures above 35 °C during the fermentation process. The optimal pH (buffered pH) of the biotransformation of hydrocortisone by immobilized and free cells was 7.0, but the maximum yield of prednisolone (60%) was obtained by immobilized cells in comparison with free cells (42%) also at pH 7.0. The prednisolone yield reached 60–65% with 1,2-propanediol cosolvent containing media and 60–62% in the case of ethanediol cosolvent containing media at 1% (v/v) of both cosolvents. 10 mg/50 ml Tween 80 the medium increased the prednisolone yield by only 1.1-fold compared with the control. The maximum bioconversion efficiency was obtained at a substrate concentration of 20 mg/50 ml medium. Stability studies showed that the immobilized cells can be used for seven times without any significant decrease in activity.     

Physiological tests for yeast brewery cells immobilized on modified chamotte carrier

In this study yeast cell physiological activity was assessed on the basis of the in situ activity of two important enzymes, succinate dehydrogenase and pyruvate decarboxylase. FUN1 dye bioconversion and cellular ATP content were also taken as important indicators of yeast cell activity. The study was conducted on six brewing yeast strains, which were either free cells or immobilized on a chamotte carrier. The experimental data obtained indicate clearly that, in most cases, the immobilized cells showed lower enzyme activity than free cells from analogous cultures. Pyruvate decarboxylase activity in immobilized cells was higher than in planktonic cell populations only in the case of the Saccharomyces pastorianus 680 strain. However, in a comparative assessment of the fermentation process, conducted with the use of free and immobilized cells, much more favorable dynamics and carbon dioxide productivity were observed in immobilized cells, especially in the case of brewing lager yeast strains. This may explain the higher total cell density per volume unit of the fermented medium and the improved resistance of immobilized cells to environmental changes.     

Silicone-immobilized cells ofGeotrichum sp. G38 used in biotransformation

The conditions for the reduction of dibenzoyl by silicone-immobilizedGeotrichum sp. G38 were examined, and optimal concentrations of stannous octanoate, ethyl silicate, water and entrapped biomass for the reaction were established. The optimum pH and temperature of the reaction medium were 7.0, and 35‡C (free cells) or 40‡C (immobilized cells), respectively. The immobilized cells showed higher activity than free cells under optimum conditions. The extent of conversion remained greater than 90% even after immobilized cells had been recycled 28 times. When silicone-immobilizedGeotrichum sp. G38 was used in the reduction of ethyl benzoylacetate, the (R)-enantiomer was obtained in an 81% enantiomeric excess compared with 49% enantiomeric excess using free cells.     

Bioconversion of benzonitrile to benzoic acid using free and agar entrapped cells of Nocardia globerula NHB-2

The free and agar immobilized cells of Nocardia globerula NHB-2 having nitrilase (EC 3.5.5.1) activity were used to catalyse the transformation of benzonitrile to benzoic acid. The whole cells of N. globerula NHB-2 were immobilized in agar which exhibited maximum conversion of benzonitrile to benzoic acid in 0.1 M potassium phosphate buffer pH 7.5 (free cells) 8.0 (immobilized cells), temperature 40 degrees C, cells 2 mg dcm ml(-1) reaction mixture and benzonitrile (4% v/v) in 4 h (free cells). The effect of temperature on the stability of nitrilase was studied and cells retained 100% activity at 30 degrees C and lost 50% activity at 40 degrees C. In a fed batch mode of reaction 108 and 84 gl(-1) benzoic acid was produced using free and agar entrapped cells (2 g dcm). The agar immobilized cells were recycled up to three times and 80, 62, 20 gl(-1) benzoic acid was again produced respectively in each of three cycles and a total 244 g benzoic acid was produced by recycling the same mass of immobilized biocatalyst.     

Immobilization and characterisation of a lipase from a new source, Bacillus sp. ITP-001

A new source of lipase from Bacillus sp. ITP-001 was immobilized by physical adsorption on the polymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. The support and immobilized lipase were characterised, compared to the lyophilised lipase, with regard to the specific surface area, adsorption–desorption isotherms, pore volume (Vp) and size (dp) by nitrogen adsorption, differential scanning calorimetry, thermogravimetric analysis, chemical composition analysis, Fourier transform infrared spectroscopy and biochemical properties. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0, whereas the optimum pH for the free enzyme was at pH 7.0; the optimum temperature of activity was 80 and 37 °C for the free and immobilized enzyme, respectively. The inactivation rate constant for the immobilized enzyme at 37 °C was 0.0038 h^?1 and the half-life was 182.41 h. The kinetic parameters obtained for the immobilized enzyme gave a Michaelis–Menten constant (K _m) of 49.10 mM and a maximum reaction velocity (V _max) of 205.03 U/g. Furthermore, the reuse of the lipase immobilized by adsorption allowed us to observe that it could be reused for 10 successive cycles, duration of each cycle (1 h), maintaining 33 % of the initial activity.     

Degradation of Carbazole by Microbial Cells Immobilized in Magnetic Gellan Gum Gel Beads

Polycyclic aromatic heterocycles, such as carbazole, are environmental contaminants suspected of posing human health risks. In this study, we investigated the degradation of carbazole by immobilized Sphingomonas sp. strain XLDN2-5 cells. Four kinds of polymers were evaluated as immobilization supports for Sphingomonas sp. strain XLDN2-5. After comparison with agar, alginate, and κ-carrageenan, gellan gum was selected as the optimal immobilization support. Furthermore, Fe₃O₄ nanoparticles were prepared by a coprecipitation method, and the average particle size was about 20 nm with 49.65-electromagnetic-unit (emu) g⁻¹ saturation magnetization. When the mixture of gellan gel and the Fe₃O₄ nanoparticles served as an immobilization support, the magnetically immobilized cells were prepared by an ionotropic method. The biodegradation experiments were carried out by employing free cells, nonmagnetically immobilized cells, and magnetically immobilized cells in aqueous phase. The results showed that the magnetically immobilized cells presented higher carbazole biodegradation activity than nonmagnetically immobilized cells and free cells. The highest biodegradation activity was obtained when the concentration of Fe₃O₄ nanoparticles was 9 mg ml⁻¹ and the saturation magnetization of magnetically immobilized cells was 11.08 emu g⁻¹. Additionally, the recycling experiments demonstrated that the degradation activity of magnetically immobilized cells increased gradually during the eight recycles. These results support developing efficient biocatalysts using magnetically immobilized cells and provide a promising technique for improving biocatalysts used in the biodegradation of not only carbazole, but also other hazardous organic compounds.     

Multilayer membranes for glucose biosensing via layer-by-layer assembly of multiwall carbon nanotubes and glucose oxidase

A bilayer of the polyelectrolytes poly(dimethyldiallylammonium chloride) (PDDA) and poly(sodium 4-styrenesulfonate) (PSS) was formed on a 3-mercapto-1-propanesulfonic-acid-modified Au electrode. Subsequently, multiwall carbon nanotubes (MWCNTs) wrapped by positively charged PDDA were assembled layer-by-layer with negatively charged glucose oxidase (GOx) onto the PSS-terminated bilayer. Electrochemical impedance spectroscopy and atomic force microscopy were adopted to monitor the regular growth of the PDDA-MWCNTs/GOx bilayers. Using GOx as a model enzyme, the assembled multilayer membranes showed some striking features such as the adsorbed form of GOx on individual MWCNT, uniformity, good stability, and electrocatalytic activity toward oxygen reduction. Based on the consumption of dissolved oxygen during the oxidation process of glucose catalyzed by the immobilized GOx, a sensitive amperometric biosensor was developed for the detection of glucose up to 5.0 mM with a detection limit of 58 microM. The sensitivity increased with increasing sensing layers up to five bilayers. Ascorbic acid and uric acid did not cause any interference due to the use of a low operating potential. The present method showed high reproducibility for the fabrication of carbon-nanotubes-based amperometric biosensors.     

Petroleum-contaminated water treatment in a fluidized-bed bioreactor with immobilized Rhodococcus cells

Biotreatment of petroleum-contaminated water in a fluidized-bed bioreactor (FBB) is a relatively new and promising technology, which efficiency is strongly affected by the biocatalyst used. Our laboratory experiments involved biotreatment of the water contaminated with a synthetic petroleum mixture consisting of aliphatic and polyaromatic hydrocarbons (PAHs) using a continuous column bioreactor with recycle. Different type biocatalysts were tested, including Rhodococcus bacteria immobilized in hydrophobized carriers such as sawdust, poly(vinyl alcohol) cryogel (cryoPVA) and poly(acrylamide) cryogel (cryoPAAG). Biocatalyst abilities to oxidize petroleum hydrocarbons were evaluated using the Columbus Micro-Oxymax^® respirometer. The hydrophobized sawdust-supported biocatalyst demonstrated substantially higher metabolic activity than C₁₂-cryoPAAG-based biocatalyst due to larger number of immobilized Rhodococcus cells and, therefore, had benefits for application in FBBs. The obtained results showed that designed FBB process is successful, providing 70–100% removal of n-alkanes (C₁₀–C₁₉) and 66–70% removal of 2–3-ring PAHs from contaminated water after 2–3 weeks.     

Activity of myrosinase from Sinapis alba seeds immobilized into Ca-polygalacturonate as a simplified model of soil-root interface mucigel

Ca-polygalacturonate is a demethoxylated component of pectins which are constitutive of plant root mucigel. In order to define the role of root mucigel in myrosinase immobilization and activity at root level, a myrosinase enzyme which had been isolated from Sinapis alba seeds was immobilized into Ca-polygalacturonate. The activity profile for the immobilized and free enzyme was evaluated using the pH-Stat method as a function of time, temperature, and pH. The Michaelis-Menten kinetic parameters change between the immobilized (V _max ?=?127?±?13 U mg^?1 protein; K _M ?=?6.28?±?0.09?mM) and free (V _max ?=?17?±?1 U mg^?1 protein; K _M ?=?0.96?±?0.01?mM) forms of myrosinase, probably due to conformational changes involving the active site as a consequence of enzyme immobilization. Immobilized enzyme activity evaluated as a function of different substrates gave the highest value with nasturtin, the glucosinolate that is typical of several brassicaceae plant roots containing the glucosinolate-myrosinase defensive system. No feedback regulation mechanism was found in the presence of an excess of enzymatic reaction products (i.e. allyl isothiocyanate or sulphate). The high enzyme immobilization yield into Ca-polygalacturonate and its activity preservation under different conditions suggest that the enzyme released by plants at root level could be entrapped in root mucigel in order to preserve its activity.     

Immobilization of chloroperoxidase onto highly hydrophilic polyethylene chains via bio-conjugation: Catalytic properties and stabilities

Chloroperoxidase (CPO) was covalently immobilized on poly(hydroxypropyl methacrylate-co-polyethyleneglycole-methacrylate) membranes, which were characterized, by swelling test, FT-IR spectroscopy, scanning electron microscopy, and contact angle measurement. The K_m and V_max values for free and immobilized CPO were found to be 34.6 and 47.2 μM, and 287.5 and 245.2 U/mg protein, respectively. The optimum pH for both the free and immobilized enzyme was observed at 3.0. The immobilized enzyme showed wide pH and temperature profiles. Most importantly, the increased thermal, storage and operational stability of immobilized CPO should depend on the creation of a comfortable strong hydrophilic microenvironment on the designed support to the host enzyme molecule.     

Reversible immobilization of glucoamylase onto magnetic carbon nanotubes functionalized with dendrimer

Magnetic carbon nanotubes (MCNTs) with necklace-like nanostructures was prepared via hydrothermal method, and hyperbranched poly(amidoamine) (PAMAM) was grafted on the surface of MCNTs on the basis of the Michael addition of methyl acrylate and the amidation of the resulting ester with a large excess of ethylenediamine (EDA), which could achieve generational growth under such uniform stepwise reactions. The terminal –NH₂ groups from the dendritic PAMAM were reacted with differently functionalized groups to form functionalized MCNTs. Subsequently, enzyme was immobilized on the functionalized MCNTs through adsorption, covalent bond, and metal-ion affinity interactions. The immobilization of glucoamylase, hereby chosen as model enzyme, onto the differently functionalized MCNTs is further demonstrated and assessed based on its activity, thermal stability, as well as reusability. Besides ease in recovery by magnetic separation, the immobilized glucoamylase on functionalized MCNTs offers superior stability and reusability, without compromising the substrate specificity of free glucoamylase. Furthermore, the results indicate that the metal-chelate dendrimer offers an efficient route to immobilize enzymes via metal-ion affinity interactions. The applicability of the regenerated supports in the current study is relevant for the conjugation of other enzymes beyond glucoamylase.     

Transformation of cortisol to prednisolone by viable cells of Arthrobacter simplex covalently immobilized on cellulose granules

Arthrobacter simplex cells have been covalently immobilized to granules of microcrystallized regenerated cellulose by means of N-hydroxymethyl, N′-glucosylurea groups at pH 8.5, 18°C and cell suspension concentration of 60 mg/ml. The immobilization yield was found to exceed 100%. The maximum initial rate of Cortisol transformation to Prednisolone remained almost constant after 20-fold transformation in a nutrient medium containing 0.5% peptone at pH 8.0, 32°C and aeration with oxygen. The effect of the substrate concentration on the activity of the immobilized cells, as well as of the ratio between substrate and immobilized cells on the degree of transformation, was investigated. The immobilized cells were characterized by means of electronmicroscopic studies. Microbiological observations have shown that immobilized cells can proliferate and the free cells obtained are accumulated in the nutrient medium. The immobilized cells preserve their viability for a long time when they are stored at 4°C.     

Characterization of Nitrosomonas europaea immobilized in calcium alginate

Nitrosomonas europaea cells have been immobilized in calcium alginate and the resulting preparation was used as a biocatalyst for the oxidation of NH⁺₄ to NO^?₂. Characterization of this immobilized biocatalyst was done according to the guidelines recommended by the Working Party on Immobilized Biocatalysts of the European Federation of Biotechnology. The most important indications obtained from the results are: (a) at low concentrations of substrate, either ammonium ions or oxygen, diffusion limitation will play a role; (b) inhibition by nitrite ions accumulating in the support is not rapidly controlling the efficiency of the immobilized cells; (c) accumulation of hydrogen ions is a rate-limiting factor, especially in unbuffered solutions; (d) the activity of immobilized N. europaea can increase as a result of growth in the support under conditions which would cause washout of free cells. This last result shows the potential of immobilized N. europaea for nitrification of wastewater. The development of a system applying a cheaper and more stable support is, however, a prerequisite for this application.