New restriction endonucleases from Acetobacter aceti and Bacillus aneurinolyticus.

Two restriction endonucleases with new sequence specificities have been isolated from Acetobacter aceti IFO 3281 and Bacillus aneurinolyticus IAM 1077 and named AatII and BanII, respectively. Based on analysis of the sequences around the restriction sites, the recognition sequences and cleavage sites of these endonucleases were deduced as below: (formula; see text)     

A combinatorial approach to create artificial homing endonucleases cleaving chosen sequences

Meganucleases, or homing endonucleases (HEs) are sequence-specific endonucleases with large (>14 bp) cleavage sites that can be used to induce efficient homologous gene targeting in cultured cells and plants. These findings have opened novel perspectives for genome engineering in a wide range of fields, including gene therapy. However, the number of identified HEs does not match the diversity of genomic sequences, and the probability of finding a homing site in a chosen gene is extremely low. Therefore, the design of artificial endonucleases with chosen specificities is under intense investigation. In this report, we describe the first artificial HEs whose specificity has been entirely redesigned to cleave a naturally occurring sequence. First, hundreds of novel endonucleases with locally altered substrate specificity were derived from I-CreI, a Chlamydomonas reinhardti protein belonging to the LAGLIDADG family of HEs. Second, distinct DNA-binding subdomains were identified within the protein. Third, we used these findings to assemble four sets of mutations into heterodimeric endonucleases cleaving a model target or a sequence from the human RAG1 gene. These results demonstrate that the plasticity of LAGLIDADG endonucleases allows extensive engineering, and provide a general method to create novel endonucleases with tailored specificities.     

Three restriction endonucleases from Anabaena flos-aquae

Three site-specific endonucleases, AflI, AflII and AflIII, have been partially purified from the cyanobacterium Anabaena flos-aquae CCAP 1403/13f. Their recognition and cleavage specificities have been determined to be: (formula; see text) AflII and AflIII are new specificities and may be useful in molecular cloning, as well as in the analysis of DNA. The distribution of type II restriction endonucleases in the cyanobacteria is briefly discussed.     

Engineering of large numbers of highly specific homing endonucleases that induce recombination on novel DNA targets

The last decade has seen the emergence of a universal method for precise and efficient genome engineering. This method relies on the use of sequence-specific endonucleases such as homing endonucleases. The structures of several of these proteins are known, allowing for site-directed mutagenesis of residues essential for DNA binding. Here, we show that a semi-rational approach can be used to derive hundreds of novel proteins from I-CreI, a homing endonuclease from the LAGLIDADG family. These novel endonucleases display a wide range of cleavage patterns in yeast and mammalian cells that in most cases are highly specific and distinct from I-CreI. Second, rules for protein/DNA interaction can be inferred from statistical analysis. Third, novel endonucleases can be combined to create heterodimeric protein species, thereby greatly enhancing the number of potential targets. These results describe a straightforward approach for engineering novel endonucleases with tailored specificities, while preserving the activity and specificity of natural homing endonucleases, and thereby deliver new tools for genome engineering.     

Cleavage of mispaired heteroduplex DNA substrates by numerous restriction enzymes

The utility of restriction endonucleases as a tool in molecular biology is in large part due to the high degree of specificity with which they cleave well-characterized DNA recognition sequences. The specificity of restriction endonucleases is not absolute, yet many commonly used assays of biological phenomena and contemporary molecular biology techniques rely on the premise that restriction enzymes will cleave only perfect cognate recognition sites. In vitro, mispaired heteroduplex DNAs are commonly formed, especially subsequent to polymerase chain reaction amplification. We investigated a panel of restriction endonucleases to determine their ability to cleave mispaired heteroduplex DNA substrates. Two straightforward, non-radioactive assays are used to evaluate mispaired heteroduplex DNA cleavage: a PCR amplification method and an oligonucleotide-based assay. These assays demonstrated that most restriction endonucleases are capable of site-specific double-strand cleavage with heteroduplex mispaired DNA substrates, however, certain mispaired substrates do effectively abrogate cleavage to undetectable levels. These data are consistent with mispaired substrate cleavage previously reported for Eco RI and, importantly, extend our knowledge of mispaired heteroduplex substrate cleavage to 13 additional enzymes.     

Specificity of restriction endonucleases and methylases--a review

The properties and sources of all known restriction endonucleases and methylases are listed. The enzymes are cross-indexed (Table I), classified according to their recognition sequence homologies (Table II), and characterized within Table II by the cleavage and methylation positions, the number of recognition sites on the double-stranded DNA of the bacteriophages lambda, phi X174 and M13mp7, the viruses Ad2 and SV40, the plasmids pBR322 and pBR328, and the microorganisms from which they originate. Other tabulated properties of the restriction endonucleases include relaxed specificities (integrated into Table II), the structure of the generated fragment ends (Table III), and the sensitivity to different kinds of DNA methylation (Table V). In Table IV the conversion of two- and four-base 5'-protruding ends into new recognition sequences is compiled which is obtained by the fill-in reaction with Klenow fragment of the Escherichia coli DNA polymerase I or additional nuclease S1 treatment followed by ligation of the modified fragment termini [P3]. Interconversion of restriction sites generates novel cloning sites without the need of linkers. This should improve the flexibility of genetic engineering experiments. Table VI classifies the restriction methylases according to the nature of the methylated base(s) within their recognition sequences. This table also comprises restriction endonucleases which are known to be inhibited or activated by the modified nucleotides. The detailed sequences of those overlapping restriction sites are also included which become resistant to cleavage after the sequential action of corresponding restriction methylases and endonucleases [N11, M21]. By this approach large DNA fragments can be generated which is helpful in the construction of genomic libraries. The data given in both Tables IV and VI allow the design of novel sequence specificities. These procedures complement the creation of universal cleavage specificities applying class IIS enzymes and bivalent DNA adapter molecules [P17, S82].     

BglII and MunI: what a difference a base makes

Restriction endonucleases are resilient to alterations in their DNA-binding specificities. Structures of the BglII and MunI endonucleases bound to their palindromic DNA sites, which differ by only their outer base pairs from the recognition sequences of BamHI and EcoRI, respectively, have recently been determined. A comparison of these complexes reveals surprising differences and similarities in structure, and provides a basis for understanding the immutability of restriction endonucleases.     

Massively parallel determination and modeling of endonuclease substrate specificity

We describe the identification and characterization of novel homing endonucleases using genome database mining to identify putative target sites, followed by high throughput activity screening in a bacterial selection system. We characterized the substrate specificity and kinetics of these endonucleases by monitoring DNA cleavage events with deep sequencing. The endonuclease specificities revealed by these experiments can be partially recapitulated using 3D structure-based computational models. Analysis of these models together with genome sequence data provide insights into how alternative endonuclease specificities were generated during natural evolution.     

Frequencies of restriction sites.

Restriction sites or other sequence patterns are usually assumed to occur according to a Poisson distribution with mean equal to the reciprocal of the probability of the given site or pattern. For situations where non-overlapping occurrences of patterns, such as restriction sites, are the objects of interest, this note shows that the Poisson assumption is frequently misleading. Both the case of base composition (independent bases) and of dinucleotide frequencies (Markov chains) are treated. Moreover, a new technique is presented which allows treatment of collections of patterns, where the departure from the Poisson assumption is even more striking. This later case includes double digests, and an example of a five enzyme digest is included.     

I-BasI and I-HmuI: two phage intron-encoded endonucleases with homologous DNA recognition sequences but distinct DNA specificities

I-HmuI and I-BasI are two highly similar nicking DNA endonucleases, which are each encoded by a group I intron inserted into homologous sites within the DNA polymerase genes of Bacillus phages SPO1 and Bastille, respectively. Here, we present a comparison of the DNA specificities and cleavage activities of these enconucleases with homologous target sites. I-BasI has properties that are typical of homing endonucleases, nicking the intron-minus polymerase genes in either host genome, three nucleotides downstream of the intron insertion site. In contrast, I-HmuI nicks both the intron-plus and intron-minus site in its own host genome, but does not act on the target from Bastille phage. Although the enzymes have distinct DNA substrate specificities, both bind to an identical 25bp region of their respective intron-minus DNA polymerase genes surrounding the intron insertion site. The endonucleases appear to interact with the DNA substrates in the downstream exon 2 in a similar manner. However, whereas I-HmuI is known to make its only base-specific contacts within this exon region, structural modeling analyses predict that I-BasI might make specific base contacts both upstream and downstream of the site of intron insertion. The predicted requirement for base-specific contacts in exon 1 for cleavage by I-BasI was confirmed experimentally. This explains the difference in substrate specificities between the two enzymes, including the observation that the former enzyme is relatively insensitive to the presence of an intron upstream of exon 2. These differences are likely a consequence of divergent evolutionary constraints.     

Alteration of apparent restriction endonuclease recognition specificities by DNA methylases.

An in vitro method of altering the apparent cleavage specificities of restriction endonucleases was developed using DNA modification methylases. This method was used to reduce the number of cleavage sites for 34 restriction endonucleases. In particular, single-site cleavages were achieved for Nhe I in Adeno-2 DNA and for Acc I and Hinc II in pBR322 DNA by specifically methylating all but one recognition sequence.     

Effect of site-specific modification on restriction endonucleases and DNA modification methyltransferases.

Restriction endonucleases have site-specific interactions with DNA that can often be inhibited by site-specific DNA methylation and other site-specific DNA modifications. However, such inhibition cannot generally be predicted. The empirically acquired data on these effects are tabulated for over 320 restriction endonucleases. In addition, a table of known site-specific DNA modification methyltransferases and their specificities is presented along with EMBL database accession numbers for cloned genes.     

Survey and mapping of restriction endonuclease cleavage sites in bacteriophage T7 DNA.

A survey of restriction endonucleases having different cleavage specificities has identified 10 that do not cut wild-type bacteriophage T7 DNA, 11 that cut at six or fewer sites, four that cut at 18 to 45 sites, and 12 that cut at more than 50 sites. All the cleavage sites for the 13 enzymes that cut at 26 or fewer sites have been mapped. Cleavage sites for each of the 10 enzymes that do not cut T7 DNA would be expected to occur an average of 9 to 10 times in a random nucleotide sequence the length of T7 DNA. A possible explanation for the lack of any cleavage sites for these enzymes might be that T7 encounters enzymes having these specificities in natural hosts, and that the sites have been eliminated from T7 DNA by natural selection. Five restriction endonucleases were found to cut within the terminal repetition of T7 DNA; one of these, KpnI, cuts at only three additional sites in the T7 DNA molecule. The length of the terminal repetition was estimated by two independent means to be approximately 155 to 160 base-pairs.     

Specificity of action of DNA methylases BcnI, CfrI and Cfr10I

The site specificity of three DNA methylases BcnI, CfrI and Cfr10I was determined to be 5'Cm4C(C/G)GG, 5'PyGGm5CCPu and 5'Pum5CCGGPy, respectively. Using the modification methylases under investigation with known restriction endonucleases, fourteen new DNA cleavage specificities can be created. Some aspects of the use of restriction endonucleases in DNA methylation analysis are discussed.     

Mining endonuclease cleavage determinants in genomic sequence data

Homing endonucleases have great potential as tools for targeted gene therapy and gene correction, but identifying variants of these enzymes capable of cleaving specific DNA targets of interest is necessary before the widespread use of such technologies is possible. We identified homologues of the LAGLIDADG homing endonuclease I-AniI and their putative target insertion sites by BLAST searches followed by examination of the sequences of the flanking genomic regions. Amino acid substitutions in these homologues that were located close to the target site DNA, and thus potentially conferring differences in target specificity, were grafted onto the I-AniI scaffold. Many of these grafts exhibited novel and unexpected specificities. These findings show that the information present in genomic data can be exploited for endonuclease specificity redesign.     

Preparation of "histocomposites" for direct immunohistochemical screening of monoclonal antibodies

Screening and selection of hybrids producing relevant antibodies in monoclonal technology usually rely on rapid and sensitive adsorption assays of the ELISA type. To identify clones producing antibodies with unexpected specificities direct immunohistological screening may be applied, but this is both tedious and expensive. Histocomposites made from a number of tissue types permit testing of supernatants at the required early stage after fusion. The multiple antigenic specificities displayed in such test specimens ensure detection of a broad range of antibodies. A simple method for production of the histocomposites is described.     

Preparation of “Histocomposites” for Direct Immunohistological Screening of Monoclonal Antibodies

Screening and selection of hybrid producing relevant antibodies in monoclonal technology usually rely on rapid and sensitive adsorption assays of the ELISA type. To identify clones producing antibodies with unexpected specificities direct immunohistological screening may be applied, but this is both tedious and expensive. Histocomposites made from a number of tissue types permit testing of supernatants at the required early stage after fusion. The multiple antigenic specificities displayed in such test specimens ensure detection of a broad range of antibodies. A simple method for production of the histocomposites is described.     

Homing endonuclease I-CreI derivatives with novel DNA target specificities

Homing endonucleases are highly specific enzymes, capable of recognizing and cleaving unique DNA sequences in complex genomes. Since such DNA cleavage events can result in targeted allele-inactivation and/or allele-replacement in vivo, the ability to engineer homing endonucleases matched to specific DNA sequences of interest would enable powerful and precise genome manipulations. We have taken a step-wise genetic approach in analyzing individual homing endonuclease I-CreI protein/DNA contacts, and describe here novel interactions at four distinct target site positions. Crystal structures of two mutant endonucleases reveal the molecular interactions responsible for their altered DNA target specificities. We also combine novel contacts to create an endonuclease with the predicted target specificity. These studies provide important insights into engineering homing endonucleases with novel target specificities, as well as into the evolution of DNA recognition by this fascinating family of proteins.     

In vivo selection of engineered homing endonucleases using double-strand break induced homologous recombination

Homing endonucleases, endonucleases capable of recognizing long DNA sequences, have been shown to be a tool of choice for precise and efficient genome engineering. Consequently, the possibility to engineer novel endonucleases with tailored specificities is under strong investigation. In this report, we present a simple and efficient method to select meganucleases from libraries of variants, based on their cleavage properties. The method has the advantage of directly selecting for the ability to induce double-strand break induced homologous recombination in a eukaryotic environment. Model selections demonstrated high levels of enrichments. Moreover, this method compared favorably with phage display for enrichment of active mutants from a mutant library. This approach makes possible the exploration of large sequence spaces and thereby represents a valuable tool for genome engineering.     

Genetic structure of the IncN plasmid N3

N3, a plasmid of incompatibility group N (IncN) was mapped by cleavage with restriction endonucleases. The restriction fragments were cloned into vector plasmids. All of the genes unique to IncN plasmids such as specific replication machinery, a restriction-modification system, and repair functions were located on a large portion which had no cleavage sites for many of the site-specific six base-identifying restriction endonucleases tested.