Old can be new again: HAPPY whole genome sequencing, mapping and assembly

During the last three decades, both genome mapping and sequencing methods have advanced significantly to provide a foundation for scientists to understand genome structures and functions in many species. Generally speaking, genome mapping relies on genome sequencing to provide basic materials, such as DNA probes and markers for their localizations, thus constructing the maps. On the other hand, genome sequencing often requires a high-resolution map as a skeleton for whole genome assembly. However, both genome mapping and sequencing have never come together in one pipeline. After reviewing mapping and next-generation sequencing methods, we would like to share our thoughts with the genome community on how to combine the HAPPY mapping technique with the new-generation sequencing, thus integrating two systems into one pipeline, called HAPPY pipeline. The pipeline starts with preparation of a HAPPY panel, followed by multiple displacement amplification for producing a relatively large quantity of DNA. Instead of conventional marker genotyping, the amplified panel DNA samples are subject to new-generation sequencing with barcode method, which allows us to determine the presence/absence of a sequence contig as a traditional marker in the HAPPY panel. Statistical analysis will then be performed to infer how close or how far away from each other these contigs are within a genome and order the whole genome sequence assembly as well. We believe that such a universal approach will play an important role in genome sequencing, mapping, and assembly of many species; thus advancing genome science and its applications in biomedicine and agriculture.     

Pseudo-Sanger sequencing: massively parallel production of long and near error-free reads using NGS technology

Background

Usually, next generation sequencing (NGS) technology has the property of ultra-high throughput but the read length is remarkably short compared to conventional Sanger sequencing. Paired-end NGS could computationally extend the read length but with a lot of practical inconvenience because of the inherent gaps. Now that Illumina paired-end sequencing has the ability of read both ends from 600 bp or even 800 bp DNA fragments, how to fill in the gaps between paired ends to produce accurate long reads is intriguing but challenging.

Results

We have developed a new technology, referred to as pseudo-Sanger (PS) sequencing. It tries to fill in the gaps between paired ends and could generate near error-free sequences equivalent to the conventional Sanger reads in length but with the high throughput of the Next Generation Sequencing. The major novelty of PS method lies on that the gap filling is based on local assembly of paired-end reads which have overlaps with at either end. Thus, we are able to fill in the gaps in repetitive genomic region correctly. The PS sequencing starts with short reads from NGS platforms, using a series of paired-end libraries of stepwise decreasing insert sizes. A computational method is introduced to transform these special paired-end reads into long and near error-free PS sequences, which correspond in length to those with the largest insert sizes. The PS construction has 3 advantages over untransformed reads: gap filling, error correction and heterozygote tolerance. Among the many applications of the PS construction is de novo genome assembly, which we tested in this study. Assembly of PS reads from a non-isogenic strain of Drosophila melanogaster yields an N50 contig of 190 kb, a 5 fold improvement over the existing de novo assembly methods and a 3 fold advantage over the assembly of long reads from 454 sequencing.

Conclusions

Our method generated near error-free long reads from NGS paired-end sequencing. We demonstrated that de novo assembly could benefit a lot from these Sanger-like reads. Besides, the characteristic of the long reads could be applied to such applications as structural variations detection and metagenomics.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-14-711) contains supplementary material, which is available to authorized users.     

Discovery of transgene insertion sites by high throughput sequencing of mate pair libraries

Background

Transgenesis by random integration of a transgene into the genome of a zygote has become a reliable and powerful method for the creation of new mouse strains that express exogenous genes, including human disease genes, tissue specific reporter genes or genes that allow for tissue specific recombination. Nearly 6,500 transgenic alleles have been created by random integration in embryos over the last 30 years, but for the vast majority of these strains, the transgene insertion sites remain uncharacterized.

Results

To obtain a complete understanding of how insertion sites might contribute to phenotypic outcomes, to more cost effectively manage transgenic strains, and to fully understand mechanisms of instability in transgene expression, we’ve developed methodology and a scoring scheme for transgene insertion site discovery using high throughput sequencing data.

Conclusions

Similar to other molecular approaches to transgene insertion site discovery, high-throughput sequencing of standard paired-end libraries is hindered by low signal to noise ratios. This problem is exacerbated when the transgene consists of sequences that are also present in the host genome. We’ve found that high throughput sequencing data from mate-pair libraries are more informative when compared to data from standard paired end libraries. We also show examples of the genomic regions that harbor transgenes, which have in common a preponderance of repetitive sequences.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-367) contains supplementary material, which is available to authorized users.     

CGAL: computing genome assembly likelihoods

Assembly algorithms have been extensively benchmarked using simulated data so that results can be compared to ground truth. However, in de novo assembly, only crude metrics such as contig number and size are typically used to evaluate assembly quality. We present CGAL, a novel likelihood-based approach to assembly assessment in the absence of a ground truth. We show that likelihood is more accurate than other metrics currently used for evaluating assemblies, and describe its application to the optimization and comparison of assembly algorithms. Our methods are implemented in software that is freely available at http://bio.math.berkeley.edu/cgal/.     

Review of general algorithmic features for genome assemblers for next generation sequencers

In the realm of bioinformatics and computational biology,the most rudimentary data upon which all the analysis is built is the sequence data of genes,proteins and RNA.The sequence data of the entire genome is the solution to the genome assembly problem.The scope of this contribution is to provide an overview on the art of problem-solving applied within the domain of genome assembly in the nextgeneration sequencing(NGS) platforms.This article discusses the major genome assemblers that were proposed in the literature during the past decade by outlining their basic working principles.It is intended to act as a qualitative,not a quantitative,tutorial to all working on genome assemblers pertaining to the next generation of sequencers.We discuss the theoretical aspects of various genome assemblers,identifying their working schemes.We also discuss briefly the direction in which the area is headed towards along with discussing core issues on software simplicity.     

Comparison of the Illumina Genome Analyzer and Roche 454 GS FLX for Resequencing of Hypertrophic Cardiomyopathy-Associated Genes

Next-generation sequencing (NGS) is widely used in biomedical research, but its adoption has been limited in molecular diagnostics. One application of NGS is the targeted resequencing of genes whose mutations lead to an overlapping clinical phenotype. This study evaluated the comparative performance of the Illumina Genome Analyzer and Roche 454 GS FLX for the resequencing of 16 genes associated with hypertrophic cardiomyopathy (HCM). Using a single human genomic DNA sample enriched by long-range PCR (LR-PCR), 40 GS FLX and 31 Genome Analyzer exon variants were identified using ≥30-fold read-coverage and ≥20% read-percentage selection criteria. Twenty-seven platform concordant variants were Sanger-confirmed. The discordant variants segregated into two categories: variants with read coverages ≥30 on one platform but <30-fold on the alternate platform and variants with read percentages ≥20% on one platform but <20% on the alternate platform. All variants with <30-fold coverage were Sanger-confirmed, suggesting that the coverage criterion of ≥30-fold is too stringent for variant discovery. The variants with <20% read percentage were identified as reference sequence based on Sanger sequencing. These variants were found in homopolymer tracts and short-read misalignments, specifically in genes with high identity. The results of the current study demonstrate the feasibility of combining LR-PCR with the Genome Analyzer or GS FLX for targeted resequencing of HCM-associated genes.     

Sequencing and comparative analyses of Aegilops tauschii chromosome arm 3DS reveal rapid evolution of Triticeae genomes

Bread wheat (Triticum aestivum, AABBDD) is an allohexaploid species derived from two rounds of interspecific hybridizations. A high-quality genome sequence assembly of diploid Aegilops tauschii, the donor of the wheat D genome, will provide a useful platform to study polyploid wheat evolution. A combined approach of BAC pooling and next-generation sequencing technology was employed to sequence the minimum tiling path (MTP) of 3176 BAC clones from the short arm of Ae. tauschii chromosome 3 (At3DS). The final assembly of 135 super-scaffolds with an N50 of 4.2 Mb was used to build a 247-Mb pseudomolecule with a total of 2222 predicted protein-coding genes. Compared with the orthologous regions of rice, Brachypodium, and sorghum, At3DS contains 38.67% more genes. In comparison to At3DS, the short arm sequence of wheat chromosome 3B (Ta3BS) is 95-Mb large in size, which is primarily due to the expansion of the non-centromeric region, suggesting that transposable element (TE) bursts in Ta3B likely occurred there. Also, the size increase is accompanied by a proportional increase in gene number in Ta3BS. We found that in the sequence of short arm of wheat chromosome 3D (Ta3DS), there was only less than 0.27% gene loss compared to At3DS. Our study reveals divergent evolution of grass genomes and provides new insights into sequence changes in the polyploid wheat genome.     

Optimization of linkage mapping strategy and construction of a high-density American lotus linkage map

Background

Lotus is a diploid plant with agricultural, medicinal, and ecological significance. Genetic linkage maps are fundamental resources for genome and genetic study, and also provide molecular markers for breeding in agriculturally important species. Genotyping by sequencing revolutionized genetic mapping, the restriction-site associated DNA sequencing (RADseq) allowed rapid discovery of thousands of SNPs markers, and a crucial aspect of the sequence based mapping strategy is the reference sequences used for marker identification.

Results

We assessed the effectiveness of linkage mapping using three types of references for scoring markers: the unmasked genome, repeat masked genome, and gene models. Overall, the repeat masked genome produced the optimal genetic maps. A high-density genetic map of American lotus was constructed using an F₁ population derived from a cross between Nelumbo nucifera ‘China Antique’ and N. lutea ‘AL1’. A total of 4,098 RADseq markers were used to construct the American lotus ‘AL1’ genetic map, and 147 markers were used to construct the Chinese lotus ‘China Antique’ genetic map. The American lotus map has 9 linkage groups, and spans 494.3 cM, with an average distance of 0.7 cM between adjacent markers. The American lotus map was used to anchor scaffold sequences in the N. nucifera ‘China Antique’ draft genome. 3,603 RADseq markers anchored 234 individual scaffold sequences into 9 megascaffolds spanning 67% of the 804 Mb draft genome.

Conclusions

Among the unmasked genome, repeat masked genome and gene models, the optimal reference sequences to call RADseq markers for map construction is repeat masked genome. This high density genetic map is a valuable resource for genomic research and crop improvement in lotus.     

Rapid Detection of the ACMG/ACOG-Recommended 23 CFTR Disease-Causing Mutations Using Ion Torrent Semiconductor Sequencing

Cystic fibrosis (CF) is one of the most frequently diagnosed autosomal-recessive diseases in the Caucasian population. For general-population CF carrier screening, the American College of Medical Genetics (ACMG)/American College of Obstetricians and Gynecologists (ACOG) have recommended a core panel of 23 mutations that will identify 49–98% of carriers, depending on ethnic background. Using a genotyping technology that can rapidly identify disease-causing mutations is important for high-throughput general-population carrier screening, confirming clinical diagnosis, determining treatment options, and prenatal diagnosis. Here, we describe a proof-of-concept study to determine whether the Ion Torrent Personal Genome Machine (PGM) sequencer platform can reliably identify all ACMG/ACOG 23 CF transmembrane conductance regulator (CFTR) mutations. A WT CF specimen along with mutant DNA specimens representing all 23 CFTR mutations were sequenced bidirectionally on the Ion Torrent 314 chip to determine the accuracy of the PGM for CFTR variant detection. We were able to reliably identify all of the targeted mutations except for 2184delA, which lies in a difficult, 7-mer homopolymer tract. Based on our study, we believe PGM sequencing may be a suitable technology for identifying CFTR mutations in the future. However, as a result of the elevated rate of base-calling errors within homopolymer stretches, mutations within such regions currently need to be evaluated carefully using an alternative method.     

RGAAT: A Reference-based Genome Assembly and Annotation Tool for New Genomes and Upgrade of Known Genomes

The rapid development of high-throughput sequencing technologies has led to a dramatic decrease in the money and time required for de novo genome sequencing or genome resequencing projects, with new genome sequences constantly released every week. Among such projects, the plethora of updated genome assemblies induces the requirement of version-dependent annotation files and other compatible public dataset for downstream analysis. To handle these tasks in an efficient manner, we developed the reference-based genome assembly and annotation tool (RGAAT), a flexible toolkit for resequencing-based consensus building and annotation update. RGAAT can detect sequence variants with comparable precision, specificity, and sensitivity to GATK and with higher precision and specificity than Freebayes and SAMtools on four DNA-seq datasets tested in this study. RGAAT can also identify sequence variants based on cross-cultivar or cross-version genomic alignments. Unlike GATK and SAMtools/BCFtools, RGAAT builds the consensus sequence by taking into account the true allele frequency. Finally, RGAAT generates a coordinate conversion file between the reference and query genomes using sequence variants and supports annotation file transfer. Compared to the rapid annotation transfer tool (RATT), RGAAT displays better performance characteristics for annotation transfer between different genome assemblies, strains, and species. In addition, RGAAT can be used for genome modification, genome comparison, and coordinate conversion. RGAAT is available at https://sourceforge.net/projects/rgaat/ and https://github.com/wushyer/RGAAT_v2 at no cost.     

An improved genome reference for the African cichlid,Metriaclima zebra

Background

Problems associated with using draft genome assemblies are well documented and have become more pronounced with the use of short read data for de novo genome assembly. We set out to improve the draft genome assembly of the African cichlid fish, Metriaclima zebra, using a set of Pacific Biosciences SMRT sequencing reads corresponding to 16.5× coverage of the genome. Here we characterize the improvements that these long reads allowed us to make to the state-of-the-art draft genome previously assembled from short read data.

Results

Our new assembly closed 68 % of the existing gaps and added 90.6Mbp of new non-gap sequence to the existing draft assembly of M. zebra. Comparison of the new assembly to the sequence of several bacterial artificial chromosome clones confirmed the accuracy of the new assembly. The closure of sequence gaps revealed thousands of new exons, allowing significant improvement in gene models. We corrected one known misassembly, and identified and fixed other likely misassemblies. 63.5 Mbp (70 %) of the new sequence was classified as repetitive and the new sequence allowed for the assembly of many more transposable elements.

Conclusions

Our improvements to the M. zebra draft genome suggest that a reasonable investment in long reads could greatly improve many comparable vertebrate draft genome assemblies.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1930-5) contains supplementary material, which is available to authorized users.     

Graphical contig analyzer for all sequencing platforms (G4ALL): a new stand-alone tool for finishing and draft generation of bacterial genomes

Genome assembly has always been complicated due to the inherent difficulties of sequencing technologies, as well the computational methods used to process sequences. Although many of the problems for the generation of contigs from reads are well known, especially those involving short reads, the orientation and ordination of contigs in the finishing stages is still very challenging and time consuming, as it requires the manual curation of the contigs to guarantee correct identification them and prevent misassembly. Due to the large numbers of sequences that are produced, especially from the reads produced by next generation sequencers, this process demands considerable manual effort, and there are few software options available to facilitate the process. To address this problem, we have developed the Graphic Contig Analyzer for All Sequencing Platforms (G4ALL): a stand-alone multi-user tool that facilitates the editing of the contigs produced in the assembly process. Besides providing information on the gene products contained in each contig, obtained through a search of the available biological databases, G4ALL produces a scaffold of the genome, based on the overlap of the contigs after curation.

Availability

The software is available at: http://www.genoma.ufpa.br/rramos/softwares/g4all.xhtml     

The real cost of sequencing: higher than you think!

Advances in sequencing technology have led to a sharp decrease in the cost of ''data generation''. But is this sufficient to ensure cost-effective and efficient ''knowledge generation''?     

Construction of a dairy microbial genome catalog opens new perspectives for the metagenomic analysis of dairy fermented products

Background

Microbial communities of traditional cheeses are complex and insufficiently characterized. The origin, safety and functional role in cheese making of these microbial communities are still not well understood. Metagenomic analysis of these communities by high throughput shotgun sequencing is a promising approach to characterize their genomic and functional profiles. Such analyses, however, critically depend on the availability of appropriate reference genome databases against which the sequencing reads can be aligned.

Results

We built a reference genome catalog suitable for short read metagenomic analysis using a low-cost sequencing strategy. We selected 142 bacteria isolated from dairy products belonging to 137 different species and 67 genera, and succeeded to reconstruct the draft genome of 117 of them at a standard or high quality level, including isolates from the genera Kluyvera, Luteococcus and Marinilactibacillus, still missing from public database. To demonstrate the potential of this catalog, we analysed the microbial composition of the surface of two smear cheeses and one blue-veined cheese, and showed that a significant part of the microbiota of these traditional cheeses was composed of microorganisms newly sequenced in our study.

Conclusions

Our study provides data, which combined with publicly available genome references, represents the most expansive catalog to date of cheese-associated bacteria. Using this extended dairy catalog, we revealed the presence in traditional cheese of dominant microorganisms not deliberately inoculated, mainly Gram-negative genera such as Pseudoalteromonas haloplanktis or Psychrobacter immobilis, that may contribute to the characteristics of cheese produced through traditional methods.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-1101) contains supplementary material, which is available to authorized users.     

基于第二代测序技术的基因资源挖掘

转录组研究一直是生命科学研究的一个重要方向,在第二代测序技术问世以前,已经产生了一些行之有效的转录组研究方法,但这些方法存在一定的局限性。第二代测序技术的出现不仅使转录组研究很快进入了高速发展期,同时也为遗传资源的挖掘提供了一套全新的技术平台。本文简要介绍了第二代测序技术的化学原理和特性,重点阐述了利用第二代测序技术进行转录组测序,从而在此基础上挖掘遗传资源的研究。     

Discovery of the First Germline-Restricted Gene by Subtractive Transcriptomic Analysis in the Zebra Finch,Taeniopygia guttata

1. Download high-res image (165KB)
2. Download full-size image