A novel SERRS sandwich-hybridization assay to detect specific DNA target

In this study, we have applied Surface Enhanced Resonance Raman Scattering (SERRS) technology to the specific detection of DNA. We present an innovative SERRS sandwich-hybridization assay that allows specific DNA detection without any enzymatic amplification, such as is the case with Polymerase Chain Reaction (PCR). In some substrates, such as ancient or processed remains, enzymatic amplification fails due to DNA alteration (degradation, chemical modification) or to the presence of inhibitors. Consequently, the development of a non-enzymatic method, allowing specific DNA detection, could avoid long, expensive and inconclusive amplification trials. Here, we report the proof of concept of a SERRS sandwich-hybridization assay that leads to the detection of a specific chamois DNA. This SERRS assay reveals its potential as a non-enzymatic alternative technology to DNA amplification methods (particularly the PCR method) with several applications for species detection. As the amount and type of damage highly depend on the preservation conditions, the present SERRS assay would enlarge the range of samples suitable for DNA analysis and ultimately would provide exciting new opportunities for the investigation of ancient DNA in the fields of evolutionary biology and molecular ecology, and of altered DNA in food frauds detection and forensics.     

DNA damage reduces Taq DNA polymerase fidelity and PCR amplification efficiency

DNA damage blocks DNA polymerase progression and increases miscoding. In this study, we assessed the effects of specific lesions on Taq DNA polymerase fidelity and amplification efficiency. In the presence of 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG), Taq DNA polymerase inserted dCMP and to a lesser extent dAMP. 8-Oxo-7,8-dihydro-2'-deoxyadenosine (8-oxodA) instructed the incorporation of dTMP and caused a pronounced n-1 deletion not observed in other systems. The presence of an abasic lesion led to dAMP incorporation and n-1 deletions. In addition, we introduce the mean modified efficiency (MME) as a more precise method for determining PCR amplification efficiency of damaged templates. Using this method, we were able to quantify reductions in amplification efficiency of templates containing 8-oxodG (single or multiple), 8-oxodA, or abasic sites. Because the MME method can detect small reductions in amplification efficiency, it may be useful in comparing the extent of damage in environmentally degraded or archival DNA specimens.     

Quantification of DNA strand breaks and abasic sites by oxime derivatization and accelerator mass spectrometry: application to gamma-radiation and peroxynitrite

We report a highly sensitive method to quantify abasic sites and deoxyribose oxidation products arising in damaged DNA. The method exploits the reaction of aldehyde- and ketone-containing deoxyribose oxidation products and abasic sites with [(14)C]methoxyamine to form stable oxime derivatives, as originally described by Talpaert-Borle and Liuzzi [Reaction of apurinic/apyrimidinic sites with [(14)C]methoxyamine. A method for the quantitative assay of AP sites in DNA, Biochim. Biophys. Acta 740 (1983) 410-416]. The sensitivity of the method was dramatically improved by the application of accelerator mass spectrometry to quantify the (14)C, with a limit of detection of 1 lesion in 10(6) nucleotides in 1 microg of DNA. The method was validated using DNA containing a defined quantity of abasic sites, with a >0.95 correlation between the quantities of abasic sites and those of methoxyamine labels. The original applications of this and similar oxyamine derivatization methods have assumed that abasic sites are the only aldehyde-containing DNA damage products. However, deoxyribose oxidation produces strand breaks and abasic sites containing a variety of degradation products with aldehyde and ketone moieties. To assess the utility of methoxyamine labeling for quantifying strand breaks and abasic sites, the method was applied to plasmid DNA treated with gamma-radiation and peroxynitrite. For gamma-radiation, there was a 0.99 correlation between the quantity of methoxyamine labels and the quantity of strand breaks and abasic sites determined by a plasmid nicking assay; the abasic sites comprised less than 10% of the radiation-induced DNA damage. Studies with peroxynitrite demonstrate that the method, in conjunction with DNA repair enzymes that remove damaged bases to produce aldehydic sugar residues or abasic sites, is also applicable to quantifying nucleobase lesions in addition to strand break products. Compared to other abasic site quantification techniques, the modified method offers the advantage of providing a straightforward and direct measurement of aldehyde- and ketone-containing strand breaks and abasic sites, with the potential for direct labeling in cells prior to DNA isolation.     

Improved measurement of dibenzo[a,l]pyrene-induced abasic sites by the aldehyde-reactive probe assay

Dibenzo[a,l]pyrene (DB[a,l]P) induces abundant amounts of depurinating adducts that spontaneously dissociate to form abasic sites in DNA. However, several previous studies that used the aldehyde-reactive probe (ARP) assay, could not verify abasic site formation by DB[a,l]P. Therefore, we examined whether a modification of the ARP assay would allow greater quantification of abasic sites. A previous study indicated that the abasic site quantification is improved by letting ARP trap the nascent abasic sites in cells, before extracting DNA for the assay. To test whether the addition of ARP to the DB[a,l]P-DNA adduct-forming reaction would improve abasic site quantification, we treated calf thymus DNA (0.625 mg/mL) with DB[a,l]P (80 microM) and 3-methylcholanthrene-treated rat liver microsomes with or without ARP (3 mM). The inclusion of ARP in the adduct-forming reaction resulted in significantly greater detection of abasic sites (62 lesions/10(6) bp versus 3.7 lesions/10(6) bp). DB[a,l]P also induces DNA strand breaks. The strand breaks may occur at abasic sites and by other mechanisms, such as oxidative damage. ARP/O-methoxyamine-abasic site conjugates are refractory to strand breakage, however, ARP or O-methoxyamine (3-10 mM) could only partially protect DB[a,l]P-induced DNA degradation, presumably by protecting the abasic sites, but not the other strand breaks. These results suggest that if DNA strand breakages occur at the abasic sites or at bases flanking them, and the fragments are lost during DNA extraction, abasic site estimation could be compromised. To obtain an independent line of evidence for abasic site formation in DB[a,l]P-treated cells, mouse Mbeta16 fibroblasts were treated with DB[a,l]P and O-methoxyamine. O-Methoxyamine is known to potentiate cytotoxicity of abasic site-inducing chemicals by forming abasic site conjugates, which partially inhibits their repair. O-Methoxyamine was found to increase DB[a,l]P cytotoxicity in these cells, supporting the idea that DB[a,l]P formed abasic sites. In summary, the inclusion of ARP in the DB[a,l]P-DNA adduct-forming reaction traps and protects the nascent abasic sites, allowing an improved quantification of abasic sites.     

Solid-phase time-resolved fluorescence detection of human immunodeficiency virus polymerase chain reaction amplification products.

A new assay system for the detection of polymerase chain reaction (PCR) amplification products is presented. This single-pot sandwich assay system employs solid-support oligonucleotide-coated capture beads, a rare earth metal chelate-labeled probe, and a time-resolved fluorescence detection. The new assay system was evaluated for various reaction conditions including, DNA denaturation time, hybridization salt concentration, probe concentration, and hybridization time, all of which are important in designing an assay with a high level of sensitivity for the detection of duplex DNA. This nonisotopic assay system was applied to the detection of purified human immunodeficiency virus (HIV) DNA and sensitivity was compared with agarose gel electrophoresis and slot blot hybridization using a 32P-labeled probe. We were able to detect the amplified product from one copy of HIV DNA after 35 cycles of PCR amplification in less than 30 min using this assay, which compared with one copy by gel electrophoresis after 40 cycles of PCR amplification and one copy by slot blot hybridization after 35 cycles of PCR amplification and an overnight exposure of the autoradiogram. Thus, this assay is rapid, sensitive, and easy to use.     

Quantitative PCR detection of Batrachochytrium dendrobatidis DNA from sediments and water

The fungal pathogen Batrachochytrium dendrobatidis (Bd) causes chytridiomycosis, a disease implicated in amphibian declines on 5 continents. Polymerase chain reaction (PCR) primer sets exist with which amphibians can be tested for this disease, and advances in sampling techniques allow non-invasive testing of animals. We developed filtering and PCR based quantitative methods by modifying existing PCR assays to detect Bd DNA in water and sediments, without the need for testing amphibians; we tested the methods at 4 field sites. The SYBR based assay using Boyle primers (SYBR/Boyle assay) and the Taqman based assay using Wood primers performed similarly with samples generated in the laboratory (Bd spiked filters), but the SYBR/Boyle assay detected Bd DNA in more field samples. We detected Bd DNA in water from 3 of 4 sites tested, including one pond historically negative for chytridiomycosis. Zoospore equivalents in sampled water ranged from 19 to 454 1(-1) (nominal detection limit is 10 DNA copies, or about 0.06 zoospore). We did not detect DNA of Bd from sediments collected at any sites. Our filtering and amplification methods provide a new tool to investigate critical aspects of Bd in the environment.     

Detection of Campylobacter jejuni and Campylobacter coli in environmental waters by PCR enzyme-linked immunosorbent assay

A PCR enzyme-linked immunosorbent assay (ELISA) assay was applied to the detection of Campylobacter jejuni and Campylobacter coli in environmental water samples after enrichment culture. Bacterial cells were concentrated from 69 environmental water samples by using filtration, and the filtrates were cultured in Campylobacter blood-free broth. After enrichment culture, DNA was extracted from the samples by using a rapid-boiling method, and the DNA extracts were used as a template in a PCR ELISA assay. A total of 51 samples were positive by either PCR ELISA or culture; of these, 43 were found to be positive by PCR ELISA and 43 were found to be positive by culture. Overall, including positive and negative results, 59 samples were concordant in both methods. Several samples were positive in the PCR ELISA assay but were culture negative; therefore, this assay may be able to detect sublethally damaged or viable nonculturable forms of campylobacters. The method is rapid and sensitive, and it significantly reduces the time needed for the detection of these important pathogens by 2 to 3 days.     

Quantitation of gene-specific DNA damage by competitive PCR

A sensitive assay for quantitating DNA damage within individual genes would be a valuable tool for identifying the molecular mechanisms of disease and the sites of action of various carcinogens and anticancer drugs. This report describes a competitive PCR assay that was used to quantitate DNA damage induced by anticancer drugs within a 683-bp region of the c-myc gene in human CEM leukemia cells. Absolute quantitation of gene-specific DNA damage (attomoles or molecules of damaged DNA sequences) was achieved by coamplification of a homologous internal standard that has the same primer binding sites and PCR amplification efficiency as c-myc. The variability (standard error) associated with four separate determinations of the amount of c-myc sequence in 300 ng of DNA from untreated cells (6.80 +/- 0.05 SE amol) was less than 1% of the mean. The assay was capable of quantitating direct DNA damage that was induced by therapeutic concentrations of VM-26 and cisplatin prior to the onset of cellular apoptosis or necrosis. Both VM-26 (1-10 microM) and cisplatin (25-100 microM) induced a dose-dependent decrease in the amount of intact c-myc sequence. This assay should be readily adaptable to current real-time PCR protocols.     

Polymerase chain reaction for the rapid identification of Clostridium botulinum type A strains and detection in food samples

A polymerase chain reaction (PCR) was developed for the detection of Clostridium botulinum type A, a cause of human botulism. A two primer set and an oligonucleotide detection probe were used to specifically detect Cl. botulinum type A neurotoxin gene (BoNT/A). After 40 cycles of amplification, detection of a 798 bp amplified DNA fragment was carried out by agarose gel electrophoresis and Southern blot hybridization. This assay was able to detect 12.5 fg of purified target DNA or five bacteria per reaction. The sensitivity in artificially contaminated food samples after an 18 h enrichment step ranges from 10 to 10³ bacteria per g according to the type of food samples. No cross-reactions were observed with the other Cl. botulinum toxinotypes and other bacteria found routinely in food. This PCR method may provide a suitable and rapid alternative to standard techniques for detection of Cl. botulinum type A in food samples.     

Detection of Campylobacter jejuni and Campylobacter coli in Environmental Waters by PCR Enzyme-Linked Immunosorbent Assay

A PCR enzyme-linked immunosorbent assay (ELISA) assay was applied to the detection of Campylobacter jejuni and Campylobacter coli in environmental water samples after enrichment culture. Bacterial cells were concentrated from 69 environmental water samples by using filtration, and the filtrates were cultured in Campylobacter blood-free broth. After enrichment culture, DNA was extracted from the samples by using a rapid-boiling method, and the DNA extracts were used as a template in a PCR ELISA assay. A total of 51 samples were positive by either PCR ELISA or culture; of these, 43 were found to be positive by PCR ELISA and 43 were found to be positive by culture. Overall, including positive and negative results, 59 samples were concordant in both methods. Several samples were positive in the PCR ELISA assay but were culture negative; therefore, this assay may be able to detect sublethally damaged or viable nonculturable forms of campylobacters. The method is rapid and sensitive, and it significantly reduces the time needed for the detection of these important pathogens by 2 to 3 days.     

Single-tube reaction using peptide nucleic acid as both PCR clamp and sensor probe for the detection of rare mutations

The detection of rare mutant DNA from a background of wild-type alleles usually requires laborious manipulations, such as restriction enzyme digestion and gel electrophoresis. Here, we describe a protocol for homogeneous detection of rare mutant DNA in a single tube. The protocol uses a peptide nucleic acid (PNA) as both PCR clamp and sensor probe. The PNA probe binds tightly to perfectly matched wild-type DNA template but not to mismatched mutant DNA sequences, which specifically inhibits the PCR amplification of wild-type alleles without interfering with the amplification of mutant DNA. A fluorescein tag (which undergoes fluorescence resonance energy transfer with the adjacent fluorophore of an anchor probe when both are annealed to the template DNA) also allows the PNA probe to generate unambiguous melting curves to detect mutant DNA during real-time fluorescent monitoring. The whole assay takes about only 1 h. This protocol has been used for detecting mutant K-ras DNA and could be applied to the detection of other rare mutant DNAs.     

The determination of the DNA sequence specificity of bleomycin-induced abasic sites

The DNA sequence specificity of the cancer chemotherapeutic agent, bleomycin, was determined with high precision in purified plasmid DNA using an improved technique. This improved technique involved the labelling of the 5′- and 3′-ends of DNA with different fluorescent tags, followed by simultaneous cleavage by bleomycin and capillary electrophoresis with laser-induced fluorescence. This permitted the determination of bleomycin cleavage specificity with high accuracy since end-label bias was greatly reduced. Bleomycin produces single- and double-strand breaks, abasic sites and other base damage in DNA. This high-precision method was utilised to elucidate, for the first time, the DNA sequence specificity of bleomycin-induced DNA damage at abasic sites. This was accomplished using endonuclease IV that cleaves DNA at abasic sites after bleomycin damage. It was found that bleomycin-induced abasic sites formed at 5′-GC and 5′-GT sites while bleomycin-induced phosphodiester strand breaks formed mainly at 5′-GT dinucleotides. Since bleomycin-induced abasic sites are produced in the absence of molecular oxygen, this difference in DNA sequence specificity could be important in hypoxic tumour cells.     

Application of PCR for detection and identification of mycoplasma contamination in virus stocks

Summary A nested polymerase chain reaction (PCR) was used to detect and identify mycoplasma contaminants in viral stocks. The results of the PCR assay proved to be a sensitive and accurate indicator of the true status of the stock tested. Those samples positive by agar culture or Hoechst stain were also positive by PCR. Those samples that were inconclusive by Hoechst stain (10.05%) could be clearly determined to be mycoplasma positive or negative by PCR. The PCR assay also detected those fastidious species of mycoplasma that gave false negative results by the direct culture method. In many respects the PCR-based mycoplasma detection method described is superior to the agar culture and Hoechst staining detection methods. In this study, the PCR assay detected substantially more mycoplasma-positive viral stocks than did the agar culture assay. Due to its speed, sensitivity, and reliability, the PCR assay is of particular value in monitoring the process of removing mycoplasma from contaminated stocks. Furthermore, the PCR amplification products can be analyzed by restriction analysis to rapidly identify the species of the mycoplasma contaminating the stock tested.     

A polymerase chain reaction-based method to detect cisplatin adducts in specific genes.

Every bulky lesion in DNA can potentially inhibit the Taq DNA polymerase and thereby decrease the amplification produced in the polymerase chain reaction. We investigated the feasibility of using this inhibition to quantify DNA lesions produced by the anticancer drug cisplatin. Products were detected by electrophoresis followed by ethidium bromide staining. Quantitation was obtained by including [32P]dCTP in the amplification reaction and subsequently assessing the incorporated radioactivity. Hamster genomic DNA was platinated in vitro to defined levels and amplified with primers that produce either a 150, 750 or 2,000 base pair fragment. The degree of inhibition of PCR agreed with the predicted level of DNA platination in each size of fragment, suggesting that the polymerase was inhibited by every cisplatin-induced lesion. This method was used to detect cisplatin-induced lesions in the adenine phosphoribosyltransferase gene of CHO cells. Cells were incubated with 0-125 microM cisplatin for 2 h, the DNA was purified and subjected to PCR. A significant decrease in amplification of the 2 kbp fragment was observed in DNA from cells incubated with cisplatin at 75 microM. The degree of inhibition agreed closely with the amount of DNA damage in the overall genome as measured by atomic absorption. No change was detected in amplification of the 150 base fragment which can therefore be used to normalize data for any variations between DNA samples. This assay has the same sensitivity as other methods currently used for the analysis of gene-specific damage. The advantage of this assay is that it obviates the need for specific endonuclease complexes to recognize and cleave DNA adducts as previously required when analyzing damage in specific genomic sequences.     

Simplified method for recovery and PCR detection of Cryptosporidium DNA from bovine feces.

An assay to identify Cryptosporidium DNA in bovine feces has been developed emphasizing standardization of sample preparation and simplification of the DNA recovery process for PCR amplification and DNA hybridization detection. The Cryptosporidium DNA recovery-PCR detection procedure (CR-PCR) can recover DNA suitable for PCR amplification without using or generating hazardous chemicals or wastes. In comparisons with a commercial enzyme-linked immunoassay (Color Vue-Cryptosporidium; Seradyn, Indianapolis, Ind.), the CR-PCR could detect 10(3) to 10(4) times fewer purified oocysts diluted in solution (water or buffered saline) and 10(2) times fewer oocysts from diarrheic feces and showed earlier detectability from solid, nondiarrheic feces in an experimental infection. This assay may prove useful for detecting Cryptosporidium oocysts in feces and in clarifying the role of livestock in waterborne outbreaks of cryptosporidiosis.     

Detection of abasic sites and oxidative DNA base damage using an ELISA-like assay

Reactive oxygen species produce a wide spectrum of DNA damage, including oxidative base damage and abasic (AP) sites. Many procedures are available for the quantification and detection of base damage and AP sites. However, either these procedures are laborious or the starting materials are difficult to obtain. A biotinylated aldehyde-specific reagent, ARP, has been shown to react specifically with the aldehyde group present in AP sites, resulting in biotin-tagged AP sites in DNA. The biotin-tagged AP sites can then be determined colorimetrically with an ELISA-like assay, using avidin/biotin-conjugated horseradish peroxidase as the indicator enzyme. The ARP assay is thus a simple, rapid, and sensitive method for the detection of AP sites in DNA. Furthermore, removal of damaged base by DNA N-glycosylases generates AP sites that can be measured by the ARP reagent. By coupling the ARP assay with either endonuclease III from Escherichia coli or 8-oxoguanine N-glycosylase (OGG1) from yeast, investigators can rapidly determine the amount of oxidative pyrimidine damage (endonuclease III-sensitive sites) or purine damage (OGG1-sensitive sites) in cellular DNA, respectively. An increased level of oxidative damage has been implicated in several age-related human diseases such as Alzheimer's disease, amyotrophic lateral sclerosis, and Parkinson's disease, as well as the aging process. The sensitivity and simplicity of the ARP assay thus make it a valuable method for investigators who are interested in estimating the level of oxidative DNA damage in cells and tissues derived from patients with various age-related diseases or cancers.     

A real-time polymerase chain reaction assay for quantification of allele ratios and correction of amplification bias

Allele-specific epigenetic modifications are crucial for several important biological functions, including genomic imprinting and X-inactivation in mammals. Consequently, an ever increasing number of investigations requires accurate quantification of the relative abundance of parental alleles of a specific sequence in a DNA sample. Here, combining the use of polymorphic restriction sites with real-time polymerase chain reaction (PCR) amplification, we describe a simple and quantitative assay to measure allele ratios. The efficiency of the assay was assessed on genomic DNA for several polymorphic restriction sites located in the mouse Igf2/H19 imprinted locus. The assay was also successfully applied to quantify allele ratio in cDNA samples. In addition, we provide an experimental procedure for detection and correction of potential PCR amplification bias which significantly extends the range of application of the assay.     

Detection limits of quantitative and digital PCR assays and their influence in presence–absence surveys of environmental DNA

A set of universal guidelines is needed to determine the limit of detection (LOD) in PCR‐based analyses of low‐concentration DNA. In particular, environmental DNA (eDNA) studies require sensitive and reliable methods to detect rare and cryptic species through shed genetic material in environmental samples. Current strategies for assessing detection limits of eDNA are either too stringent or subjective, possibly resulting in biased estimates of species’ presence. Here, a conservative LOD analysis grounded in analytical chemistry is proposed to correct for overestimated DNA concentrations predominantly caused by the concentration plateau, a nonlinear relationship between expected and measured DNA concentrations. We have used statistical criteria to establish formal mathematical models for both quantitative and droplet digital PCR. To assess the method, a new Grass Carp (Ctenopharyngodon idella) TaqMan assay was developed and tested on both PCR platforms using eDNA in water samples. The LOD adjustment reduced Grass Carp occupancy and detection estimates while increasing uncertainty—indicating that caution needs to be applied to eDNA data without LOD correction. Compared to quantitative PCR, digital PCR had higher occurrence estimates due to increased sensitivity and dilution of inhibitors at low concentrations. Without accurate LOD correction, species occurrence and detection probabilities based on eDNA estimates are prone to a source of bias that cannot be reduced by an increase in sample size or PCR replicates. Other applications also could benefit from a standardized LOD such as GMO food analysis and forensic and clinical diagnostics.     

Development of a new seminested PCR method for detection of Legionella species and its application to surveillance of legionellae in hospital cooling tower water.

The presence of PCR inhibitors in water samples is well known and contributes to the fact that a practical PCR assay has not been developed for legionella surveillance. In this study, we devised a new seminested PCR assay for detection of Legionella spp. in water samples as a means of overriding the PCR inhibitors without loss of sensitivity. The seminested PCR assay utilized primers to amplify the 16S rRNA gene (LEG primers) of 39 Legionella spp. The assay was specific to legionellae, and the sensitivity was 1 fg of extracted Legionella DNA in laboratory examination. To evaluate the feasibility and sensitivity of the PCR assay in identifying the presence of legionellae, it was used to survey Legionella contamination in the water of 49 cooling towers of 32 hospitals. A commercially available EnviroAmp Legionella kit and a culture method were also used in the survey for comparison with the seminested PCR assay. The detection rates of legionellae in the samples were 91.8% (45 of 49) by the PCR assay and 79.5% (39 of 49) by the culture method. The EnviroAmp kit revealed that 30.6% of the water samples (15 of 49) contained inhibitors of the PCR amplification. However, the seminested PCR assay could produce the Legionella-specific DNA bands in 14 of the 15 samples. Although 8 of the 14 samples were positive in the first-step PCR, 6 of the 14 samples became positive in the second-step PCR. These results suggest that the effect of PCR inhibitors in samples, if any, can be reduced because of the dilution of the sample in the second-step PCR and that sensitivity of detection can be increased by the second-step PCR. Thus, the seminested PCR assay with LEG primers to amplify the 16S rRNA gene of 39 Legionella spp. was a practical and sensitive method to detect Legionella spp. in water samples.