Combinatorial Interactions of Biotic and Abiotic Stresses in Plants and Their Molecular Mechanisms: Systems Biology Approach

Plants are continually facing biotic and abiotic stresses, and hence, they need to respond and adapt to survive. Plant response during multiple and combined biotic and abiotic stresses is highly complex and varied than the individual stress. These stresses resulted alteration of plant behavior through regulating the levels of microRNA, heat shock proteins, epigenetic variations. These variations can cause many adverse effects on the growth and development of the plant. Further, in natural conditions, several abiotic stresses causing factors make the plant more susceptible to pathogens infections and vice-versa. A very intricate and multifaceted interactions of various biomolecules are involved in metabolic pathways that can direct towards a cross-tolerance and improvement of plant’s defence system. Systems biology approach plays a significant role in the investigation of these molecular interactions. The valuable information obtained by systems biology will help to develop stress-resistant plant varieties against multiple stresses. Thus, this review aims to decipher various multilevel interactions at the molecular level under combinatorial biotic and abiotic stresses and the role of systems biology to understand these molecular interactions.     

Comprehensive understanding of anchorage-independent survival and its implication in cancer metastasis

Detachment is the initial and critical step for cancer metastasis. Only the cells that survive from detachment can develop metastases. Following the disruption of cell–extracellular matrix (ECM) interactions, cells are exposed to a totally different chemical and mechanical environment. During which, cells inevitably suffer from multiple stresses, including loss of growth stimuli from ECM, altered mechanical force, cytoskeletal reorganization, reduced nutrient uptake, and increased reactive oxygen species generation. Here we review the impact of these stresses on the anchorage-independent survival and the underlying molecular signaling pathways. Furthermore, its implications in cancer metastasis and treatment are also discussed.Subject terms: Metastasis, Cell death     

Visualizing protein motion in Couette flow by all-atom molecular dynamics

In living cells, biomacromolecules are exposed to a highly crowded environment. The cytoplasm, the nucleus, and other organelles are highly viscous fluids that differ from dilute in vitro conditions. Viscosity, a measure of fluid internal friction, directly affects the forces that act on immersed macromolecules. Although active motion of this viscous fluid – cytoplasmic streaming – occurs in many plant and animal cells, the effect of fluid motion (flow) on biomolecules is rarely discussed. Recently NMR experiments that apply a shearing flow in situ have been used for protein studies. While these NMR experiments have succeeded in spectroscopically tracking protein aggregation in real time, they do not provide a visual picture of protein motion under shear. To fill this gap, here we have used molecular dynamics simulations to study the motion of three proteins of different size and shape in a simple shearing flow. The proteins exhibit a superposition of random diffusion and shear-flow-induced rotational motion. Random rotational diffusion dominates at lower shear stresses, whereas an active “rolling motion” along the axis of the applied flow occurs at higher shear stress. Even larger shear stresses perturb protein secondary structure elements resulting in local and global unfolding. Apart from shear-induced unfolding, our results imply that, in an ideal Couette flow field biomolecules undergo correlated motion, which should enhance the probability of inter-molecular interaction and aggregation. Connecting biomolecular simulation with experiments applying shear flow in situ appears to be a promising strategy to study protein alignment, deformation, and dynamics under shear.     

Phenotypic plasticity and mechanical stress: biomass partitioning and clonal growth of an aquatic plant species

Mechanical stresses from wind, current or wave action can strongly affect plant growth and survival. Survival and distribution of species often depend on the plant's capacity to adapt to such stresses, particularly when amplified by climatic variations. Few studies have dealt with plastic adjustments in response to mechanical stress compared to resource stress. We hypothesized that mechanical stress should favor plastic adjustments that result in increased biomass production in zones protected from the stress and that altered growth patterns should be reversible after mechanical stress removal. Here we measured plastic adjustments in morphological traits and clonal architecture for an aquatic clonal species (Berula erecta) under two contrasting mechanical stresses in the field-standing vs. running water. Reversion of the morphological changes was then assessed using transplants in standing water. In the case of mechanical stress, size reduction, biomass reallocation within clones (higher allocations to clonal growth and to belowground organs), and a more compact growth form (reduced spacer lengths) contributed to reducing the damage risk. The removal of mechanical stress induced compensatory growth, probably linked to the production of low density tissues. However, most patterns of dry mass partitioning induced by current stress were not reversed after stress removal.     

Induction of abiotic stress tolerance in plants by endophytic microbes

Endophytes are micro‐organisms including bacteria and fungi that survive within healthy plant tissues and promote plant growth under stress. This review focuses on the potential of endophytic microbes that induce abiotic stress tolerance in plants. How endophytes promote plant growth under stressful conditions, like drought and heat, high salinity and poor nutrient availability will be discussed. The molecular mechanisms for increasing stress tolerance in plants by endophytes include induction of plant stress genes as well as biomolecules like reactive oxygen species scavengers. This review may help in the development of biotechnological applications of endophytic microbes in plant growth promotion and crop improvement under abiotic stress conditions.

Significance and Impact of the Study

Increasing human populations demand more crop yield for food security while crop production is adversely affected by abiotic stresses like drought, salinity and high temperature. Development of stress tolerance in plants is a strategy to cope with the negative effects of adverse environmental conditions. Endophytes are well recognized for plant growth promotion and production of natural compounds. The property of endophytes to induce stress tolerance in plants can be applied to increase crop yields. With this review, we intend to promote application of endophytes in biotechnology and genetic engineering for the development of stress‐tolerant plants.     

Coarse-grained molecular simulations of large biomolecules

Recently, we saw a dramatic increase in the number of researches that rely on coarse-grained (CG) simulations for large biomolecules. Here, first, we briefly describe recently developed and used CG models for proteins and nucleic acids. Balance between structure-based and physico-chemical terms is a key issue. We also discuss the multiscale algorithms used to derive CG parameters. Next, we comment on the dynamics used in CG simulations with an emphasis on the importance of hydrodynamic interactions. We then discuss the pros and cons of CG simulations. Finally, we overview recent exciting applications of CG simulations. Publicly available tools and software for CG simulations are also summarized.     

Application of magnetic techniques in the field of drug discovery and biomedicine

Magnetic separation technology, using magnetic particles, is quick and easy method for sensitive and reliable capture of specific proteins, genetic material and other biomolecules. The technique offers an advantage in terms of subjecting the analyte to very little mechanical stress compared to other methods. Secondly, these methods are non-laborious, cheap and often highly scalable. Moreover, techniques employing magnetism are more amenable to automation and miniaturization. Now that the human genome is sequenced and about 30,000 genes are annotated, the next step is to identify the function of these individual genes, carrying out genotyping studies for allelic variation and SNP analysis, ultimately leading to identification of novel drug targets. In this post-genomic era, technologies based on magnetic separation are becoming an integral part of todays biology laboratory. This article briefly reviews the selected applications of magnetic separation techniques in the field of biotechnology, biomedicine and drug discovery.     

Immuno-spin trapping of protein and DNA radicals: “Tagging” free radicals to locate and understand the redox process

Biomolecule-centered radicals are intermediate species produced during both reversible (redox modulation) and irreversible (oxidative stress) oxidative modification of biomolecules. These oxidative processes must be studied in situ and in real time to understand the molecular mechanism of cell adaptation or death in response to changes in the extracellular environment. In this regard, we have developed and validated immuno-spin trapping to tag the redox process, tracing the oxidatively generated modification of biomolecules, in situ and in real time, by detecting protein- and DNA-centered radicals. The purpose of this methods article is to introduce and update the basic methods and applications of immuno-spin trapping for the study of redox biochemistry in oxidative stress and redox regulation. We describe in detail the production, detection, and location of protein and DNA radicals in biochemical systems, cells, and tissues, and in the whole animal as well, by using immuno-spin trapping with the nitrone spin trap 5,5-dimethyl-1-pyrroline N-oxide.     

Enhancing drought tolerance in C(4) crops

Adaptation to abiotic stresses is a quantitative trait controlled by many different genes. Enhancing the tolerance of crop plants to abiotic stresses such as drought has therefore proved to be somewhat elusive in terms of plant breeding. While many C(4) species have significant agronomic importance, most of the research effort on improving drought tolerance has focused on maize. Ideally, drought tolerance has to be achieved without penalties in yield potential. Possibilities for success in this regard are highlighted by studies on maize hybrids performed over the last 70 years that have demonstrated that yield potential and enhanced stress tolerance are associated traits. However, while our understanding of the molecular mechanisms that enable plants to tolerate drought has increased considerably in recent years, there have been relatively few applications of DNA marker technologies in practical C(4) breeding programmes for improved stress tolerance. Moreover, until recently, targeted approaches to drought tolerance have concentrated largely on shoot parameters, particularly those associated with photosynthesis and stay green phenotypes, rather than on root traits such as soil moisture capture for transpiration, root architecture, and improvement of effective use of water. These root traits are now increasingly considered as important targets for yield improvement in C(4) plants under drought stress. Similarly, the molecular mechanisms underpinning heterosis have considerable potential for exploitation in enhancing drought stress tolerance. While current evidence points to the crucial importance of root traits in drought tolerance in C(4) plants, shoot traits may also be important in maintaining high yields during drought.     

QMView: A computational chemistry three-dimensional visualization tool at the interface between molecules and mankind

QMView is designed to facilitate the visualization and interpretation of quantum mechanical data. Capabilities include display of chemical structure, animation of quantum mechanically determined vibrational modes, and depiction of electronic properties and three-dimensional molecular orbitals. QMView has a user-friendly interface that allows users to interactively manipulate many features of the molecular structure and/or property, including positioning and structure representation, via mouse-activated dialog boxes. Although the interface allows input from results of any of the popularly used quantum mechanical software, we have focused on GAMESS,^1,2 a widely distributed quantum chemistry code. QMView has been designed with the special feature of working in distributed mode with GAMESS, the latter running on a supercomputer, the former running on a Silicon Graphics platform. Ancillary programs provide a method of obtaining output of graphic images in various media, including hardcopy, PostScript files, slide, and/or video. These and other original features discussed in this article provide a graphic interface that is unique compared to others that are currently available. Examples of images produced by QMView are presented.     

内源小RNAs在植物胁迫反应中的作用

世界范围内, 农作物的产量都容易受到各种生物和非生物因素的影响, 对植物逆境适应性反应机制的深入研究有助于我们采取新的措施, 以提高作物的逆境适应性。以前通常认为植物适应逆境胁迫的机制主要涉及相关基因在转录水平的调节, 然而, 近来发现部分内源小RNAs(siRNAs), 如miRNAs、 nat-siRNAs和 lsiRNAs不仅可以调节植物的生长发育,而且在植物逆境反应中具有重要作用。文章就这些内源小RNAs在氧、矿质元素、干旱、低温、脱落酸、机械、重金属、生物及其他环境因素胁迫中的作用机制做一概述。     

Unravelling the response of poplar (Populus nigra) roots to mechanical stress imposed by bending

Abstract

Mechanical stress is a widespread environmental condition that can be caused by several factors (i.e. gravity, touch, wind, soil density, soil compaction and grazing, slope) and that can severely affect plant stability. In response to mechanical stress and to improve their anchorage, plants have developed complex mechanisms to detect mechanical perturbation and to induce a suite of modifications at anatomical, physiological, biochemical, biophysical and molecular level. Although it is well recognized that one of the primary functions of root systems is to anchor the plant to the soil, root response to mechanical stresses have been investigated mainly at morphological and biomechanical level, whereas investigations about the molecular mechanisms underlying these important alterations are still in an initial stage. We have used an experimental system in which the taproot poplar seedlings are bent to simulate mechanical perturbation to begin investigate the mechanisms involved in root response to mechanical stress. The results reported herein show that, in response to bending, the poplar root changes its morphology by emitting new lateral roots, and its biomechanical properties by increasing the root biomass and lignin synthesis. In addition, using a proteomic approach, we found that several proteins involved in the signal transduction pathway, detoxification and metabolism are up-regulated and/or down-regulated in the bent root. These results provide new insight into the obscure field of woody root response to mechanical stress, and can serve as a basis for future investigations aimed at unravelling the complex mechanism involved in the reaction of root biology to environmental stress.     

Single molecule nanomanipulation of biomolecules

The development of nanomanipulation techniques has given investigators the ability to manipulate single biomolecules and to record mechanical events of biomolecules at the single molecule level. The techniques were developed to elucidate the mechanism of molecular motors. We can directly monitor the unitary process of the mechanical work and the energy conversion processes by combining these techniques with the single molecule imaging techniques. Our results strongly suggest that the sliding movement of the actomyosin motor is driven by Brownian movement. Other groups have reported data that are more consistent with the lever arm model. These methods and imaging techniques enable us to monitor the behavior of biomolecules at work and will be applied to other molecular machines.     

RedMDStream: Parameterization and Simulation Toolbox for Coarse-Grained Molecular Dynamics Models

Coarse-grained (CG) models in molecular dynamics (MD) are powerful tools to simulate the dynamics of large biomolecular systems on micro- to millisecond timescales. However, the CG model, potential energy terms, and parameters are typically not transferable between different molecules and problems. So parameterizing CG force fields, which is both tedious and time-consuming, is often necessary. We present RedMDStream, a software for developing, testing, and simulating biomolecules with CG MD models. Development includes an automatic procedure for the optimization of potential energy parameters based on metaheuristic methods. As an example we describe the parameterization of a simple CG MD model of an RNA hairpin.     

分子动力学模拟与分子生物力学

生物大分子的微观结构动力学决定其生物学功能,其力学-化学耦合规律是分子生物力学的重点关注方向。分子动力学模拟是耦合生物大分子力学-化学性质微观结构动力学基础的有效手段,其结果可用于预测结构-功能关系、指导实验设计和诠释实验结果。本文简要介绍了分子动力学模拟的方法学特点、基本工作原理及其在分子生物力学中的应用,并展望了未来可能的发展方向和应用前景。     

Shuffling the cards in signal transduction: Calcium, arachidonic acid and mechanosensitivity

Cell signaling is a very complex network of biochemical reactions triggered by a huge number of stimuli coming from the external medium. The function of any single signaling component depends not only on its own structure but also on its connections with other biomolecules. During prokaryotic-eukaryotic transition, the rearrangement of cell organization in terms of diffusional compartmentalization exerts a deep change in cell signaling functional potentiality. In this review I briefly introduce an intriguing ancient relationship between pathways involved in cell responses to chemical agonists (growth factors, nutrients, hormones) as well as to mechanical forces (stretch, osmotic changes). Some biomolecules (ion channels and enzymes) act as "hubs", thanks to their ability to be directly or indirectly chemically/mechanically co-regulated. In particular calcium signaling machinery and arachidonic acid metabolism are very ancient networks, already present before eukaryotic appearance. A number of molecular "hubs", including phospholipase A2 and some calcium channels, appear tightly interconnected in a cross regulation leading to the cellular response to chemical and mechanical stimulations.     

1[alpha],25-dihydroxyvitamin D(3) enhances annexin II dependent proliferation of osteoblasts

Cells experience a variety of physiological and non-physiological stresses and consequently have appropriate mechanisms to deal with such deviations from homeostasis. Particularly subject to mechanical stress and shear forces are the cells that make up the bones. Osteoblastic cells can interpret this stress as a stimulus for proliferation; however, the molecular mechanisms underlying this phenomenon are poorly understood. We have identified annexin II as being specifically upregulated in mechanically stressed osteoblasts and found that increased levels of this protein are necessary for 1[alpha],25-dihydroxyvitamin D(3) mediated augmentation of the proliferative response of osteoblasts after mechanical stress. Our data demonstrate a novel interaction between 1[alpha],25-dihydroxyvitamin D(3) and annexin II in the proliferative response of osteoblasts as well as a novel function for annexin II in the stress response. These findings may offer new therapeutic opportunities for conditions that require regenerative osteoblastic activity such as osteoporosis.