Characterization of <Emphasis Type="SmallCaps">d</Emphasis>-tagatose-3-epimerase from <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis> that converts <Emphasis Type="SmallCaps">d</Emphasis>-fructose into <Emphasis Type="SmallCaps">d-</Emphasis>psicose

A non-characterized gene, previously proposed as the d-tagatose-3-epimerase gene from Rhodobacter sphaeroides, was cloned and expressed in Escherichia coli. Its molecular mass was estimated to be 64 kDa with two identical subunits. The enzyme specificity was highest with d-fructose and decreased for other substrates in the order: d-tagatose, d-psicose, d-ribulose, d-xylulose and d-sorbose. Its activity was maximal at pH 9 and 40°C while being enhanced by Mn²⁺. At pH 9 and 40°C, 118 g d-psicose l⁻¹ was produced from 700 g d-fructose l⁻¹ after 3 h. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cloning and expression of a tyrosinase from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> in <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>: application in <Emphasis Type="SmallCaps">l</Emphasis>-DOPA biotransformation

Amplification of the tyrosinase gene (melO) from the genomic DNA of Aspergillus oryzae NCIM 1212 yielded a 1.6-kb product. This gene was cloned into pYLEX1, and the resulting pTyro-YLEX1 vector was transformed in Yarrowia lipolytica strain Po1g. A clone displaying the highest specific activity for tyrosinase (10.94 U/mg) was used for obtaining the complementary DNA (cDNA) and for protein expression studies. cDNA sequence analysis indicated the splicing of an intron present in the melO gene by Po1g. Native polyacrylamide gel electrophoresis, acidification at pH 3.0 followed by activity staining with l-DOPA indicated the expression of an active tyrosinase. The clone over-expressing the tyrosinase transformed l-tyrosine to l-DOPA. On optimization of conditions for the biotransformation (pH 4.0, temperature 60°C and with 3.5 mg of biomass), 0.4 mg/ml of l-DOPA was obtained.     

Continuous <Emphasis Type="SmallCaps">d</Emphasis>-lactic acid production by a novelthermotolerant <Emphasis Type="Italic">Lactobacillus delbrueckii</Emphasis> subsp. <Emphasis Type="Italic">lactis</Emphasis> QU 41

We isolated and characterized a d-lactic acid-producing lactic acid bacterium (d-LAB), identified as Lactobacillus delbrueckii subsp. lactis QU 41. When compared to Lactobacillus coryniformis subsp. torquens JCM 1166 ^T and L. delbrueckii subsp. lactis JCM 1248 ^T, which are also known as d-LAB, the QU 41 strain exhibited a high thermotolerance and produced d-lactic acid at temperatures of 50 °C and higher. In order to optimize the culture conditions of the QU 41 strain, we examined the effects of pH control, temperature, neutralizing reagent, and initial glucose concentration on d-lactic acid production in batch cultures. It was found that the optimal production of 20.1 g/l d-lactic acid was acquired with high optical purity (>99.9% of d-lactic acid) in a pH 6.0-controlled batch culture, by adding ammonium hydroxide as a neutralizing reagent, at 43 °C in MRS medium containing 20 g/l glucose. As a result of product inhibition and low cell density, continuous cultures were investigated using a microfiltration membrane module to recycle flow-through cells in order to improve d-lactic acid productivity. At a dilution rate of 0.87 h⁻¹, the high cell density continuous culture exhibited the highest d-lactic acid productivity of 18.0 g/l/h with a high yield (ca. 1.0 g/g consumed glucose) and a low residual glucose (<0.1 g/l) in comparison with systems published to date.     

Substrate specificity of a recombinant ribose-5-phosphate isomerase from <Emphasis Type="Italic">Streptococcus pneumoniae</Emphasis> and its application in the production of <Emphasis Type="SmallCaps">l</Emphasis>-lyxose and <Emphasis Type="SmallCaps">l</Emphasis>-tagatose

A putative ribose-5-phosphate isomerase (RpiB) from Streptococcus pneumoniae was purified with a specific activity of 26.7 U mg⁻¹ by Hi-Trap Q HP anion exchange and Sephacryl S-300 HR 16/60 gel filtration chromatographies. The native enzyme existed as a 96-kDa tetramer with activity maxima at pH 7.5 and 35°C. The RpiB exhibited isomerization activity with l-lyxose, l-talose, d-gulose, d-ribose, l-mannose, d-allose, l-xylulose, l-tagatose, d-sorbose, d-ribulose, l-fructose, and d-psicose and exhibited particularly high activity with l-form monosaccharides such as l-lyxose, l-xylulose, l-talose, and l-tagatose. With l-xylulose (500 g l⁻¹) and l-talose (500 g l⁻¹) substrates, the optimum concentrations of RpiB were 300 and 600 U ml⁻¹, respectively. The enzyme converted 500 g l⁻¹ l-xylulose to 350 g l⁻¹ l-lyxose after 3 h, and yielded 450 g l⁻¹ l-tagatose from 500 g l⁻¹ l-talose after 5 h. These results suggest that RpiB from S. pneumoniae can be employed as a potential producer of l-form monosaccharides.     

<Emphasis Type="Italic">In vitro</Emphasis> flowering of <Emphasis Type="Italic">Perilla frutescens</Emphasis>

This study investigated the factors affecting in vitro flowering of Perilla frutescens. The shoots regenerated from cotyledonary and hypocotyl explants cultured on Murashige and Skoog (MS) medium supplemented with benzyladenine (BA) and indole-3-acetic acid, each at 0.5 mg l⁻¹, were excised and transferred to MS medium containing 30 g l⁻¹ of sucrose, 8.25 g l⁻¹ of ammonium nitrate, and 1.0 mg l⁻¹ of BA. After 40 d of culture, 86.2% of shoots flowered and most of which self-fertilized in vitro and produced mature fruits with viable seeds. These seeds were germinated and plants were grown to maturity and flowered in soil under greenhouse conditions. The in vitro flowering system reported in this study may facilitate rapid breeding of P. frutescens and offers a model system for studying the physiological mechanism of flowering.     

Characterization of ribose-5-phosphate isomerase of <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> producing <Emphasis Type="SmallCaps">d</Emphasis>-allose from <Emphasis Type="SmallCaps">d</Emphasis>-psicose

The rpiB gene, encoding ribose-5-phosphate isomerase (RpiB) from Clostridium thermocellum, was cloned and expressed in Escherichia coli. RpiB converted d-psicose into d-allose but it did not convert d-xylose, l-rhamnose, d-altrose or d-galactose. The production of d-allose by RpiB was maximal at pH 7.5 and 65°C for 30 min. The half-lives of the enzyme at 50°C and 65°C were 96 h and 4.7 h, respectively. Under stable conditions of pH 7.5 and 50°C, 165 g d-allose l⁻¹ was produced without by-products from 500 g d-psicose l⁻¹ after 6 h.     

Identification and characterization of a novel <Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase from <Emphasis Type="Italic">Anoxybacillus flavithermus</Emphasis> useful in <Emphasis Type="SmallCaps">d</Emphasis>-tagatose production

d-Tagatose is a highly functional rare ketohexose and many attempts have been made to convert d-galactose into the valuable d-tagatose using l-arabinose isomerase (l-AI). In this study, a thermophilic strain possessing l-AI gene was isolated from hot spring sludge and identified as Anoxybacillus flavithermus based on its physio-biochemical characterization and phylogenetic analysis of its 16s rRNA gene. Furthermore, the gene encoding l-AI from A. flavithermus (AFAI) was cloned and expressed at a high level in E. coli BL21(DE3). l-AI had a molecular weight of 55,876 Da, an optimum pH of 10.5 and temperature of 95°C. The results showed that the conversion equilibrium shifted to more d-tagatose from d-galactose by raising the reaction temperatures and adding borate. A 60% conversion of d-galactose to d-tagatose was observed at an isomerization temperature of 95°C with borate. The catalytic efficiency (k _cat /K _m) for d-galactose with borate was 9.47 mM⁻¹ min⁻¹, twice as much as that without borate. Our results indicate that AFAI is a novel hyperthermophilic and alkaliphilic isomerase with a higher catalytic efficiency for d-galactose, suggesting its great potential for producing d-tagatose.     

Metabolic engineering of <Emphasis Type="Italic">Escherichia coli</Emphasis> for improving <Emphasis Type="SmallCaps">l</Emphasis>-3,4-dihydroxyphenylalanine (<Emphasis Type="SmallCaps">l</Emphasis>-DOPA) synthesis from glucose

l-3,4-dihydroxyphenylalanine (l-DOPA) is an aromatic compound employed for the treatment of Parkinson's disease. Metabolic engineering was applied to generate Escherichia coli strains for the production of l-DOPA from glucose by modifying the phosphoenolpyruvate:sugar phosphotransferase system (PTS) and aromatic biosynthetic pathways. Carbon flow was directed to the biosynthesis of l-tyrosine (l-Tyr), an l-DOPA precursor, by transforming strains with compatible plasmids carrying genes encoding a feedback-inhibition resistant version of 3-deoxy-d-arabino-heptulosonate-7-phosphate synthase, transketolase, the chorismate mutase domain from chorismate mutase-prephenate dehydratase from E. coli and cyclohexadienyl dehydrogenase from Zymomonas mobilis. The effects on l-Tyr production of PTS inactivation (PTS⁻ gluc⁺ phenotype), as well as inactivation of the regulatory protein TyrR, were evaluated. PTS inactivation caused a threefold increase in the specific rate of l-Tyr production (q _l-Tyr), whereas inactivation of TyrR caused 1.7- and 1.9-fold increases in q _l-Tyr in the PTS⁺ and the PTS⁻ gluc⁺ strains, respectively. An 8.6-fold increase in l-Tyr yield from glucose was observed in the PTS⁻ gluc⁺ tyrR ⁻ strain. Expression of hpaBC genes encoding the enzyme 4-hydroxyphenylacetate 3-hydroxylase from E. coli W in the strains modified for l-Tyr production caused the synthesis of l-DOPA. One of such strains, having the PTS⁻ gluc⁺ tyrR ⁻ phenotype, displayed the best production parameters in minimal medium, with a specific rate of l-DOPA production of 13.6 mg/g/h, l-DOPA yield from glucose of 51.7 mg/g and a final l-DOPA titer of 320 mg/l. In a batch fermentor culture in rich medium this strain produced 1.51 g/l of l-DOPA in 50 h.     

Mannose production from fructose by free and immobilized <Emphasis Type="SmallCaps">d</Emphasis>-lyxose isomerases from <Emphasis Type="Italic">Providencia stuartii</Emphasis>

A recombinant d-lyxose isomerase from Providencia stuartii was immobilized on Duolite A568 beads which gave the highest conversion of d-fructose to d-mannose among the various immobilization beads evaluated. Maximum activities of both the free and immobilized enzymes for fructose isomerization were at pH 7.5 and 45°C in the presence of 1 mM Mn²⁺. Enzyme half-lives were 14 and 30 h at 35°C and 3.4 and 5.1 h at 45°C, respectively. The immobilized enzyme in 300 g fructose/l (replaced hourly), produced 75 g mannose/l at 35°C = 25% (w/w) yield with a productivity of 75 g mannose l⁻¹ h⁻¹ after 23 cycles.     

Biotransformation of glycerol to <Emphasis Type="SmallCaps">d</Emphasis>-glyceric acid by <Emphasis Type="Italic">Acetobacter tropicalis</Emphasis>

Bacterial strains capable of converting glycerol to glyceric acid (GA) were screened among the genera Acetobacter and Gluconacetobacter. Most of the tested Acetobacter and Gluconacetobacter strains could produce 1.8 to 9.3 g/l GA from 10% (v/v) glycerol when intact cells were used as the enzyme source. Acetobacter tropicalis NBRC16470 was the best GA producer and was therefore further investigated. Based on the results of high-performance liquid chromatography analysis and specific rotation, the enantiomeric composition of the produced GA was d-glyceric acid (d-GA). The productivity of d-GA was enhanced with the addition of both 15% (v/v) glycerol and 20 g/l yeast extract. Under these optimized conditions, A. tropicalis NBRC16470 produced 22.7 g/l d-GA from 200 g/l glycerol during 4 days of incubation in a jar fermentor.     

Effect of temperature on <Emphasis Type="SmallCaps">d</Emphasis>-arabitol production from lactose by <Emphasis Type="Italic">Kluyveromyces lactis</Emphasis>

d-Arabitol production from lactose by Kluyveromyces lactis NBRC 1903 has been studied by following the time courses of concentrations of cell mass, lactose, d-arabitol, ethanol, and glycerol at different temperatures. It was found that temperature is a key factor in d-arabitol production. Within temperatures ranging from 25 to 39°C, the highest d-arabitol concentration of 99.2 mmol l⁻¹ was obtained from 555 mmol l⁻¹ of lactose after 120 h of batch cultivation at 37°C. The yield of d-arabitol production on cell mass growth increased drastically at temperatures higher than 35°C, and the yield reached 1.07 at 39°C. Increasing the cell mass concentration two-fold after 24 h of culture growth at 37°C, the d-arabitol concentration further increased to 168 mmol l⁻¹. According to the distribution of the metabolic products, metabolic changes related to growth phase were also discussed. The stationary-phase K. lactis cells in the batch culture that is started with exposing the precultured inoculum to high osmotic stress, high oxidative stress, and high heat stress are found to be preferable for d-arabitol production.     

Continuous 2-keto-<Emphasis Type="SmallCaps">l</Emphasis>-gulonic acid fermentation from <Emphasis Type="SmallCaps">l</Emphasis>-sorbose by <Emphasis Type="Italic">Ketogulonigenium vulgare</Emphasis> DSM 4025

A single-stage continuous fermentation process for the production of 2-keto-l-gulonic acid (2KGA) from l-sorbose using Ketogulonigenium vulgare DSM 4025 was developed. The chemostat culture with the dilution rate that was calculated based on the relationship between the 2KGA production rate and the 2KGA concentration was feasible for production with high concentration of 2KGA. In this system, 112.2 g/L of 2KGA on the average was continuously produced from 114 g/L of l-sorbose. A steady state of the fermentation was maintained for the duration of more than 110 h. The dilution rate was kept in the range of 0.035 and 0.043 h⁻¹, and the 2KGA productivity was 3.90 to 4.80 g/L/h. The average molar conversion yield of 2KGA from l-sorbose was 91.3%. Under the optimal conditions, l-sorbose concentration was kept at 0 g/L. Meanwhile, the dissolved oxygen level was changing in response to the dilution rate and 2KGA concentration. In the dissolved oxygen (DO) range of 16% to 58%, it was revealed that the relationship between DO and D possessed high degree of positive correlation under the l-sorbose limiting condition (complete consumption of l-sorbose). Increasing D closer to the critical value for washing out point of the continuous fermentation, DO value tended to be gradually increased up to 58%. In conclusion, an efficient and reproducible continuous fermentation process for 2KGA production by K. vulgare DSM 4025 could be developed using a medium containing baker’s yeast without using a second helper microorganism.     

Heterologous expression and characterization of <Emphasis Type="Italic">Bacillus coagulans</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase

Bacillus coagulans has been of great commercial interest over the past decade owing to its strong ability of producing optical pure l-lactic acid from both hexose and pentose sugars including l-arabinose with high yield, titer and productivity under thermophilic conditions. The l-arabinose isomerase (L-AI) from Bacillus coagulans was heterologously over-expressed in Escherichia coli. The open reading frame of the L-AI has 1,422 nucleotides encoding a protein with 474 amino acid residues. The recombinant L-AI was purified to homogeneity by one-step His-tag affinity chromatography. The molecular mass of the enzyme was estimated to be 56 kDa by SDS-PAGE. The enzyme was most active at 70°C and pH 7.0. The metal ion Mn²⁺ was shown to be the best activator for enzymatic activity and thermostability. The enzyme showed higher activity at acidic pH than at alkaline pH. The kinetic studies showed that the K _m, V _max and k _cat/K _m for the conversion of l-arabinose were 106 mM, 84 U/mg and 34.5 mM⁻¹min⁻¹, respectively. The equilibrium ratio of l-arabinose to l-ribulose was 78:22 under optimal conditions. l-ribulose (97 g/L) was obtained from 500 g/l of l-arabinose catalyzed by the enzyme (8.3 U/mL) under the optimal conditions within 1.5 h, giving at a substrate conversion of 19.4% and a production rate of 65 g L⁻¹ h⁻¹.     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.     

Improved xylanase production by<Emphasis Type="Italic"> Trichoderma reesei</Emphasis> grown on <Emphasis Type="SmallCaps">l</Emphasis>-arabinose and lactose or <Emphasis Type="SmallCaps">d</Emphasis>-glucose mixtures

Trichoderma reesei Rut C-30 was grown on eight different natural or rare aldopentoses as the main carbon source and on mixtures of an aldopentose with d-glucose or lactose. The fungal cells consumed all aldopentoses tested, except l-xylose and l-ribose. The highest total xylanase and cellulase activities were achieved when cells were grown on l-arabinose as the main carbon source. The total xylanase activity produced by cells grown on l-arabinose was even higher than that produced by cells grown on an equal amount of lactose. In co-metabolism of d-glucose (15 g l^–1) and l-arabinose (5 g l^–1), the total volumetric and specific xylanase productivities were improved (derepressed) approximately 23- and 18-fold, respectively, compared to a cultivation on only d-glucose (20 g l^–1). In a similar experiment, in which cells were grown on a mixture of lactose and l-arabinose, the xylanase productivity was approximately doubled, compared to a cultivation on only lactose. The cellulase productivities, however, were not improved by the addition of l-arabinose. Compared with a typical industrial fungal enzyme production process with lactose as the main carbon source, better volumetric and specific xylanase productivities were achieved both on a lactose/arabinose mixture and on a glucose/arabinose mixture.     

<Emphasis Type="SmallCaps">l</Emphasis>-Arabinose pathway engineering for arabitol-free xylitol production in <Emphasis Type="Italic">Candida tropicalis</Emphasis>

Xylose reductase (XR) is a key enzyme in biological xylitol production, and most XRs have broad substrate specificities. During xylitol production from biomass hydrolysate, non-specific XRs can reduce l-arabinose, which is the second-most abundant hemicellulosic sugar, to the undesirable byproduct arabitol, which interferes with xylitol crystallization in downstream processing. To minimize the flux from l-arabinose to arabitol, the l-arabinose-preferring, endogenous XR was replaced by a d-xylose-preferring heterologous XR in Candida tropicalis. Then, Bacillus licheniformis araA and Escherichia coli araB and araD were codon-optimized and expressed functionally in C. tropicalis for the efficient assimilation of l-arabinose. During xylitol fermentation, the control strains BSXDH-3 and KNV converted 9.9 g l-arabinose l⁻¹ into 9.5 and 8.3 g arabitol l⁻¹, respectively, whereas the recombinant strain JY consumed 10.5 g l-arabinose l⁻¹ for cell growth without forming arabitol. Moreover, JY produced xylitol with 42 and 16% higher productivity than BSXDH-3 and KNV, respectively.     

Production of glutamine synthetase in <Emphasis Type="Italic">Escherichia coli</Emphasis> using SUMO fusion partner and application to <Emphasis Type="SmallCaps">l</Emphasis>-glutamine synthesis

l-glutamine (Gln) is an important conditionally necessary amino acid in human body and potential demand in food or medicine industry is expected. High efficiency of l-Gln production by coupling genetic engineered bacterial glutamine synthetase (GS) with yeast alcoholic fermentation system has been developed. We report here first the application of small ubiquitin-related modifier (SUMO) fusion technology to the expression and purification of recombinant Bacillus subtilis GS. In order to obtain GS with high Gln-forming activity, safety and low cost for food and pharmaceutics industry, 0.1% (w/v) lactose was selected as inducer. The fusion protein was expressed in totally soluble form in E. coli, and expression was verified by SDS–PAGE and western blot analysis. The fusion protein was purified to 90% purity by nickel nitrilo-triacetic acid (Ni–NTA) resin chromatography with a yield of 625 mg per liter fermentation culture. After the SUMO/GS fusion protein was cleaved by the SUMO protease, the cleaved sample was reapplied to a Ni–NTA column. Finally, about 121 mg recombinant GS was obtained from 1 l fermentation culture with no less than 96% purity. The recombinant purified GS showed great transferase activity (23 U/mg), with 25 U recombinant GS in a 50 ml reaction system, a biosynthesis yield of 27.5 g/l l-Gln was detected by high pressure liquid chromatography (HPLC) or thin-layer chromatography. Thus, the application of SUMO technology to the expression and purification of GS potentially could be employed for the industrial production of l-Gln.     

Purification and characterization of <Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase from <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> producing <Emphasis Type="SmallCaps">d</Emphasis>-tagatose

l-arabinose isomerase (EC5.3.1.4. AI) mediates the isomerization of d-galactose into d-tagatose as well as the conversion of l-arabinose into l-ribulose. The AI from Lactobacillus plantarum SK-2 was purified to an apparent homogeneity giving a single band on SDS–PAGE with a molecular mass of 59.6 kDa. Optimum activity was observed at 50°C and pH 7.0. The enzyme was stable at 50°C for 2 h and held between pH 4.5 and 8.5 for 1 h. AI activity was stimulated by Mn²⁺, Fe³⁺, Fe²⁺, Ca²⁺ and inhibited by Cu²⁺, Ag⁺, Hg²⁺, Pb²⁺. d-galactose and l-arabinose as substrates were isomerized with high activity. l-arabitol was the strongest competitive inhibitor of AI. The apparent Michaelis–Menten constant (K _m), for galactose, was 119 mM. The first ten N-terminal amino acids of the enzyme were determined as MLSVPDYEFW, which is identical to L. plantarum (Q88S84). Using the purified AI, 390 mg tagatose could be converted from 1,000 mg galactose in 96 h, and this production corresponds to a 39% equilibrium.     

Strain improvement of <Emphasis Type="Italic">Lactobacillus lactis</Emphasis> for <Emphasis Type="SmallCaps">d</Emphasis>-lactic acid production

Three mutants, isolated by repeated UV mutagenesis of Lactobacillus lactis NCIM 2368, produced increased d-lactic acid concentrations. These mutants were compared with the wild type using 100 g hydrolyzed cane sugar/l in the fermentation medium. One mutant, RM2-24, produced 81 g lactic acid/l which was over three times that of the wild type. The highest d-lactic acid (110 g/l) in batch fermentation was obtained with 150 g cane sugar/l with a 73% lactic acid yield. The mutant utilizes cellobiose efficiently, converting it into d-lactic acid suggesting the presence of cellobiase. Thus, this strain could be used to obtain d-lactic acid from cellulosic materials that are pre-hydrolyzed with cellulase.