间歇及连续式固定化酶反应生产生物柴油

探讨了利用本实验室自制的Candida sp99．125脂肪酶转酯化合成生物柴油的过程。在利用间歇式反应得到最佳反应条件的情况下利用固定床反应器生产生物柴油,经过初步优化的试验结果表明,在采用分级流加甲醇下,生物柴油的转化率可以达到93％左右,并且固定化酶的使用寿命超过480h。     

脂肪酶催化合成生物柴油的研究进展

环保型燃料生物柴油有望解决能源短缺的问题,脂肪酶催化动植物油脂合成生物柴油的方法具有反应条件温和、产物易分离和不污染环境等优点。综述了酶催化法在提高脂肪酸酯产率和减少生产成本等方面的研究进展。     

复合脂肪酶催化生物柴油的初步研究

初步探讨了复合脂肪酶催化生物柴油的工艺。优化了复合酶配比条件和叔丁醇反应体系。在无溶剂体系中,Novozym435分别与Lipozyme TLIM和Lipozyme RMIM均以70／30质量比混合时,甲酯得率分别达到94．52％和96．25％,比Novozym435单独催化时的甲酯得率分别提高了9．52％和9．99％。在叔丁醇体系中,当Novozym435与Li-pozyme TLIM和Lipozyme RMIM分别以60／40和80／20的质量比混合时,其甲酯得率分别为85．06％和81．5％,比Novozym435单独催化的效率分别提高了9．89％和7．48％。优化叔丁醇体系中复合酶催化条件后,甲酯得率达92％。     

氮杂环卡宾二氧化碳加合物催化转酯反应制备生物柴油

为了开发一种无金属有机催化剂用于生物柴油的制备,合成了一系列咪唑(啉)类氮杂环卡宾的二氧化碳加合物(N-heterocyclic carbenes CO2adducts,NHC-CO2),通过加热使其释放游离卡宾,并催化转酯反应制备生物柴油。为了比较催化活性,不同结构的NHC—CO2被用于大豆油的转酯反应中。结果发现:当使用咪唑类催化剂时,产物中甲酯含量大于90%,而当使用咪唑啉型催化剂,甲酯含量不足20%,这说明咪唑类催化剂更适合本研究中的转酯反应。催化剂最佳用量为大豆油的2%(摩尔百分比),最佳醇油比为12∶1。本研究中催化剂前体释放游离卡宾进入反应介质,反应迅速,产品分离简单,是制备生物柴油的有效绿色方法。     

超声波辅助下脂肪酶催化高酸值废油脂制备生物柴油

探讨了超声波辅助条件下脂肪酶催化高酸值废油脂转化为生物柴油的反应。来源于Aspergillus oryzae和Candida antarctica的固定化脂肪酶,在超声波辅助下,对高酸值废油脂转化为生物柴油具有高的催化活性。以来自于C.antarctica的固定化脂肪酶Novozym435为催化剂,以酸价为157mg KOH/g的高酸值废油脂为原料在超声波辅助下与丙醇反应,在脂肪酶用量为油质量的8%、初始醇油摩尔比为3∶1、反应温度控制在40~45℃、超声波频率和功率分别采用28kHz和100W的条件下,反应50min转化率达到94.86%。在此条件下,不同碳原子数(C1~C5)的直链和支链醇均有较高的转化率,在短链醇的选择上具有宽广的适应性。超声波还减少了反应产物和反应体系中其他黏性杂质在固定化脂肪酶表面的吸附,回收的Novozym435相较单纯机械搅拌条件下回收的外观干净、分散良好无结块现象、易于洗涤和再次利用,具有良好的操作稳定性。     

固定化脂肪酶催化毛油合成生物柴油

本研究开发了一种用石油醚提取毛油的工艺,研究了以提取的毛油和甲醇为原料,用固定化Candida sp.99-125脂肪酶催化合成脂肪酸甲酯(FAMEs)的可行性。同时考察了磷脂对固定化酶活性、反应起始速率、固定化酶使用批次的影响以及毛油和精炼油对固定化酶使用批次等的影响。研究结果表明,用磷脂质量分数为1%的石油醚悬液浸泡过的脂肪酶比仅用石油醚浸泡过的脂肪酶初始转酯化速率显著下降。当大豆油中无磷脂时,15min时FAMEs的产率为26.2%;磷脂质量分数为5%时,FAMEs降为12.4%。当大豆油中磷脂质量分数小于1%时,固定化酶使用10个批次,FAMEs产率无明显变化。固定化脂肪酶催化石油醚浸提得到的大豆和小桐子毛油,经过10个批次反应FAMEs产率都保持在70%以上,该固定化酶直接催化毛油生产生物柴油具有良好的工业化前景。     

固定化脂肪酶催化毛棉籽油制备生物柴油

研究了固定化脂肪酶Lipozyme TL IM和Novozym435催化毛棉籽油和乙酸甲酯制备生物柴油的过程。通过向反应体系中添加甲醇,可减少乙酸的抑制,明显提高生物柴油得率,确定最佳反应条件为:正己烷作溶剂,乙酸甲酯与油摩尔比9:1,添加油重3%的甲醇、油重10%的LipozymeTLIM和5%的Novozym435复合使用,温度55°C,反应8h,生物柴油得率达到91.83%。最后探索了酶催化毛棉籽油合成生物柴油的动力学,得到动力学方程。     

脂肪酶催化制备生物柴油的研究进展

生物柴油作为一种可再生的清洁能源,以其良好的环境效应受到越来越多的关注。酶法生产生物柴油具有化学催化法不可比拟的优越性,是工业化生产的发展方向。本文综述了利用固定化脂肪酶、游离酶、全细胞生物催化剂制备生物柴油的研究与应用进展,并探讨了我国生物柴油产业化发展的困境和对策。     

可再生生物柴油副产物合成生物材料PHA研究现状

随着生物柴油产业的快速发展,大量的生物柴油副产物必将给生态环境及经济发展带来严重影响。如何利用新思路、新工艺、新技术加工处理副产物,将成为制约生物柴油产业发展的主要因素。聚羟基饱和脂肪酸酯（PHA）是当今生物材料领域最为活跃的研究热点,具有广泛的应用前景,但其生产成本高,选择便宜的合成原料一直是从事PHA研究的科学家们考虑的主要问题之一。将生物柴油副产物用于PHA生产研究,有助于解决副产物过度积累和PHA合成原料成本过高的问题,有利于生物柴油产业的稳定、可持续发展。本文综述了近年来生物柴油副产物用于PHA合成的最新进展。     

脂肪酶催化合成生物柴油的研究

生物柴油是用动植物油脂或长链脂肪酸与甲醇等低碳醇合成的脂肪酸甲酯,是一种替代能源。这里探讨了生物法制备生物柴油的过程,采用脂肪酶酯化和酯交换两条工艺路线进行催化合成。深入研究制备过程中,不同脂肪酶、酶的用量和纯度、有机溶剂、低碳醇的抑制作用、吸水剂的作用、反应时间和进程、底物的特异性和底物摩尔比等参数对酯化过程的影响。试验结果表明,采用最佳酯化反应参数和分批加入甲醇并用硅胶作脱水剂的工艺过程,酯化率可以达到92％,经分离纯化后的产品GC分析的纯度可达98％以上,固定化酶的使用半衰期可达到360h。同时对酯交换制备生物柴油过程中,甲醇的用量和甲醇的加入方式对脂肪酶催化过程的影响作了初步研究,优化后的酯交换率可达到83％。     

Cell surface and cellular debris-associated heat-stable lipolytic enzyme activities of the marine alga Nannochloropsis oceanica

Microbial surface display of lipases can be effectively employed for the development of whole-cell biocatalysts for industrial bioconversions. In the present work, we report for the first time the presence of thermostable lipolytic enzyme activities against p-nitrophenyl laurate, both on the cell surface and the cellular debris fraction of the marine microalga Nannochloropsis oceanica (strain CCMP1779). Whole cell-associated lipolytic activity (WCLA) shows a 2.5-fold stimulation after heat treatment at 100?°C for 60?min, while the activity of the respective cell debris is retained for 15?min. In contrast, heat treatment renders the soluble fraction of the disrupted cells inactive. The progress curve of cellular debris-associated lipase activity is biphasic and levels off very fast. Treatment with the surfactants SDS, Triton X-100 and CHAPS, which are known to inhibit lipase activity in various degrees, results in a loss of both cell bound and cell debris lipolytic activities (CDLA). The highest whole cell lipase catalytic efficiency was observed against p-nitrophenyl butyrate and the optimum pH for hydrolysis was determined at pH 7.0. Both unheated and heated undisrupted whole cell biocatalysts are also catalytically active against olive oil. High-salt concentrations (1M NaCl) lead to about 50% whole cell enzyme inhibition whereas the activity of heated cells increases. These findings offer novel insight into the biocatalytic properties and the biotechnological applicability of microalgal lipases from N. oceanica.     

Heterologous expression of geraniol dehydrogenase for identifying the metabolic pathways involved in the biotransformation of citral by Acinetobacter sp. Tol 5

ABSTRACT

The biotransformation of citral, an industrially important monoterpenoid, has been extensively studied using many microbial biocatalysts. However, the metabolic pathways involved in its biotransformation are still unclear, because citral is a mixture of the trans-isomer geranial and the cis-isomer neral. Here, we applied the heterologous expression of geoA, a gene encoding geraniol dehydrogenase that specifically converts geraniol to geranial and nerol to neral, to identify the metabolic pathways involved in the biotransformation of citral. Acinetobacter sp. Tol 5 was employed in order to demonstrate the utility of this methodology. Tol 5 transformed citral to (1R,3R,4R)-1-methyl-4-(1-methylethenyl)-1,3-cyclohexanediol and geranic acid. Biotransformation of citral precursors (geraniol and nerol) by Tol 5 transformant cells expressing geoA revealed that these compounds were transformed specifically from geranial. Our methodology is expected to facilitate a better understanding of the metabolic pathways involved in the biotransformation of substrates that are unstable and include geometric isomers.     

Biotransformation of β‐hydroxypyruvate and glycolaldehyde to l‐erythrulose by Pichia pastoris strain GS115 overexpressing native transketolase

Transketolase is a proven biocatalytic tool for asymmetric carbon‐carbon bond formation, both as a purified enzyme and within bacterial whole‐cell biocatalysts. The performance of Pichia pastoris as a host for transketolase whole‐cell biocatalysis was investigated using a transketolase‐overexpressing strain to catalyze formation of l ‐erythrulose from β‐hydroxypyruvic acid and glycolaldehyde substrates. Pichia pastoris transketolase coding sequence from the locus PAS_chr1‐4_0150 was subcloned downstream of the methanol‐inducible AOX1 promoter in a plasmid for transformation of strain GS115, generating strain TK150. Whole and disrupted TK150 cells from shake flasks achieved 62% and 65% conversion, respectively, under optimal pH and methanol induction conditions. In a 300 μL reaction, TK150 samples from a 1L fed‐batch fermentation achieved a maximum l ‐erythrulose space time yield (STY) of 46.58 g L^?1 h^?1, specific activity of 155 U , product yield on substrate (Y_p/s) of 0.52 mol mol^?1 and product yield on catalyst (Y_p/x) of 2.23g . We have successfully exploited the rapid growth and high biomass characteristics of Pichia pastoris in whole cell biocatalysis. At high cell density, the engineered TK150 Pichia pastoris strain tolerated high concentrations of substrate and product to achieve high STY of the chiral sugar l ‐erythrulose. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 34:99–106, 2018     

A newly isolated fungal strain used as whole‐cell biocatalyst for biodiesel production from palm oil

A strain of Aspergillus niger isolated from atmospherically exposed bread and Jatropha curcas seed was utilized as a whole‐cell biocatalyst for palm oil methanolysis to produce fatty acid methyl esters (FAME), or biodiesel. The A. niger strain had a lipase activity of 212.58 mU mL^?1 after 144 h incubation at 25 °C with an initial pH value of 6.5, using 7% polypeptone (w/w on basal medium) as the nitrogen source and 3% olive oil (w/w on basal medium) as a carbon source. The A. niger cells spontaneously immobilized within polyurethane biomass support particles (BSPs) during submerged fermentation. Thereafter, the methanolysis of palm oil was achieved via a three‐step addition of methanol in the presence of BSPs‐immobilized with A. niger cells. The influence of water content, reaction temperature and enzyme concentration on reaction rate was investigated. An 8% water content and a temperature of 40 °C in the presence of 30 immobilized BSPs, resulted in an 87% FAME yield after 72 h.     

Whole cell catalyzed esterification of fatty acids to biodiesel using Aspergillus sp.

Abstract

Powdered biomass of Aspergillus sp. (RBD01) was used to carry out esterification of long chain fatty acids for biodiesel production. Dry biomass of Aspergillus sp. at 20% (w/w) with respect to the fatty acid was able to completely esterify oleic acid to ethyl ester at 35°C, in 36 h, with step wise addition of alcohol. Similar conditions also resulted in yield of 64.5% and 58% of ethyl ester from stearic acid and palmitic acid, respectively. However, the presence of methanol resulted in 87.5%, 71% and 41% of methyl ester from oleic, palmitic and stearic acid. Furthermore, it was found that the efficiency of biomass decreased by only 10% with its repeated use up to four cycles.