Identification of the Orotidine-5′-Phosphate Decarboxylase Gene and Development of a Transformation System in the Yeast Saccharomyces exiguus Yp74L-3

To investigate the uracil biosynthetic pathway of the yeast Saccharomyces exiguus Yp74L-3, uracil auxotrophic mutants were isolated. Using conventional genetic techniques, four mutant genes concerned in uracil biosynthesis were identified and denoted as ura1, ura2, ura3, and ura4. Mutations in the URA3 and URA4 genes were specifically selected with 5-fluoroorotic acid (5-FOA). Vector plasmids containing the URA3 gene and an autonomously replicating sequence (ARS) of S. cerevisiae produced sufficient amounts of Ura⁺ transformants from the ura4 mutant of S. exiguus. This fact indicates that the S. exiguus URA4 gene encodes orotidine-5′-phosphate decarboxylase (OMP decarboxylase) and demonstrates that vector plasmids for S. cerevisiae are also usable in S. exiguus.     

5-fluoro-orotic acid induces chromosome alterations in genetically manipulated strains of Candida albicans

We previously reported the occurrence of chromosome alterations in a Candida albicans prototrophic strain 3153A treated with 5-fluoro-orotic acid (5-FOA). In this study we investigated the mutagenic properties of 5-FOA with two derivatives of C. albicans strain CAF4-2 (ura3/ura3), each containing an ectopic copy of URA3 gene (ura3/ ura3 URA3) on a different chromosome. As expected, after the ura3/ura3 URA3 constructs were applied to 5-FOA containing solid medium, the "pop-outs" that lost URA3 appeared. However most of the "pop-outs" acquired various chromosome alterations. Thus constructs exposed to 5-FOA should be examined for chromosome alterations or the use of 5-FOA should be avoided.     

Marker-disruptive gene integration and URA3 recycling for multiple gene manipulation in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The introduction of several kinds of genes into the yeast chromosome is a powerful tool in many fields from fundamental study to industrial application. Here, we describe a general strategy for one-step gene integration and a marker recycling method. Forty base pairs of a short sequence derived from a region adjacent to the HIS3 locus were placed between cell surface displaying β-glucosidase (BGL) and URA3 marker genes. HIS3 deletion and BGL–URA3 fragment integration were achieved via a PCR fragment consisting of the BGL–URA3 fragment attached to homology sequences flanked by the HIS3 targeting locus. The obtained his3::URA3 disruptants were plated on a 5-FOA plate to select for the URA3 deletion due to repeated sequences at both sides of URA3 gene. In all selected colonies, BGL genes were integrated at the targeted HIS3 locus and URA3 was completely deleted. In addition, introduced BGL was efficiently expressed, and the transformants fermented cellobiose to ethanol effectively. As our strategy creates next transformation markers continuously together with gene integration, this method can serve as a simple and powerful tool for multiple genetic manipulations in yeast engineering.     

Efficient generation of recessive traits in diploid sake yeast by targeted gene disruption and loss of heterozygosity

Sake yeast, a diploid Saccharomyces cerevisiae strain, is useful for industry but difficult to genetically engineer because it hardly sporulates. Until now, only a few recessive mutants of sake yeast have been obtained. To solve this problem, we developed the high-efficiency loss of heterozygosity (HELOH) method, which applies a two-step gene disruption. First, a heterozygous disruptant was constructed by gene replacement with URA3, followed by marker recycling on medium containing 5-fluoroorotic acid (5-FOA). Subsequently, spontaneous loss of heterozygosity (LOH) yielding a homozygous disruptant was selected for in a second round of gene integration. During this step, the wild-type allele of the heterozygous disruptant was marked by URA3 integration, and the resulting transformants were cultivated in non-selective medium to induce recombination and then grown on medium with 5-FOA to enrich for mutants that had undergone LOH. Although the frequency with which LOH occurs is extremely low, many homozygous disruptants were obtained with the HELOH method. Thus, we were able to efficiently construct homozygous disruptants of diploid sake yeast without sporulation, and sake yeast strains with multiple auxotrophies and a protease deficiency could be constructed. The HELOH method, therefore, facilitated the utilization of diploid sake yeast for genetic engineering purposes.     

Transformation system for an asporogenous methylotrophic yeast, Candida boidinii: cloning of the orotidine-5''-phosphate decarboxylase gene (URA3), isolation of uracil auxotrophic mutants, and use of the mutants for integrative transformation.

An integrative transformation system was established for an asporogenous methylotrophic yeast, Candida boidinii. This system uses a uracil auxotrophic mutant of C. boidinii as the host strain in combination with its URA3 gene as the selectable marker. First, the C. boidinii URA3 gene coding for orotidine-5'-phosphate decarboxylase (ODCase) was cloned by using complementation of the pyrF mutation of Escherichia coli. Next, the host ODCase-negative mutant strains (ura3 strains) were isolated by mutagenesis and selection for 5-fluro-orotic acid (5-FOA) resistance. Five ura3 host strains that exhibited both a low reversion rate and good methylotrophic growth were obtained. All of these strains could be transformed to Ura+ phenotype with a C. boidinii URA3-harboring plasmid linearized within the Candida DNA. The transformants had a stable Ura+ phenotype after nonselective growth for 10 generations. These results and extensive Southern analysis indicated that the linearized plasmid was integrated into the host chromosomal DNA by homologous recombination at the URA3 locus in C. boidinii.     

An efficient method for homologous gene reconstitution in Cryptococcus gattii using URA5 auxotrophic marker

Cryptococcus gattii (Cg) is an emerging pathogen of both healthy and immunocompromised patients worldwide. Understanding the molecular genetic basis of virulence and physiology of this pathogen will be critical for defining its pathogenic mechanisms. The purine biosynthetic gene, URA5 encoding orate phosphorybosyltransferase (OPRTase), has been successfully used as a selectable marker for gene disruption by transformation and homologous recombination in Cg. Here, we report the characterization of ura5 auxotrophy and URA5 reversion phenomenon at the molecular, genetic, and structural levels, and use of ura5→URA5 reversion as a tool for reconstitution of gene of interest and auxotrophic marker to their native loci. We identified a single mutation of GG₁₂₈T→GAT with substitution of glycine to aspartic acid at amino acid position 43 resulting in ura5 auxotrophy. The ura5→URA5 reversion on CSM lacking uracil (CSM-U) was found to be a rare phenomenon with a reversion frequency of 0.000002%, and sequence analysis of URA5 from all the reverted strains revealed mutation of GA₁₂₈T→GGT back to its ancestral state. The URA5 allele in the reverted strains was fully functional, as demonstrated by the excellent growth of these strains on medium lacking uracil, as well as by the ability of this allele to efficiently transform ura5 mutant to restore prototrophy. The deduced Cg URA5 protein modeled on the known crystal structures of OPRTase from Salmonella typhimurium (1LH0_A, 1STO) and from Escherichia coli (1ORO_A) indicated that the glycine 43 of Cg URA5 was situated on a conserved loop, and it’s substitution to more globose aspartic acid may have resulted in URA5 inactivation in auxotrophic strain. The advantages of this approach for the generation of a reconstituted strain are (1) that it restores the functionality of the native URA5, (2) that it eliminates an additional biolistic delivery of exogenous URA5, and (3) that it allows easy selection of reconstituted strains with homologous integration. This strategy was successfully used for the generation of Cg can2+CAN2/URA5 homologous reconstituted strains, which grew in ambient air to the wild-type level while can2 mutant exhibited severe growth defect under similar conditions. Srinivas D. Narasipura and Ping Ren contributed equally to this work.     

Construction of Uracil and Tryptophan Auxotrophic Mutants from Sake Yeasts by Disruption of URA3 and TRP1 Genes

Uracil auxotrophic mutants were constructed from the sake yeasts K-701 and K-901 by successive URA3 gene disruption. First, as sake yeast is diploid, one URA3 gene was disrupted with pURA38 (AURA3 SMR1) and the heterozygous disruptant was isolated on an SM (sulfometuron methyl) plate. The other URA3 gene was disrupted with pURA36 (Δ URA3) and homozygous URA3 disruptants were isolated on FOA (5-fluoro-orotic acid) plate on which only ura3 mutants can grow. Direct URA3 gene disruption with pURA36 (Δ URA3) was also done and the uracil auxotrophic mutant was isolated. Four types of URA3 disruptants were isolated, two of which had no bacterial DNA.

A tryptophan auxotrophic mutant was constructed from one of the URA3 disruptant using pTRP14 (Δ TRP1 URA3) by gene disruption. This TRP1 disruptant was also lacking bacterial DNA.

Laboratory scale sake brewing using the auxotrophic mutants showed that these strains are very useful as recipient strains for molecular breeding of sake yeasts.     

Use of synthetic lethal mutants to clone and characterize a novel CTP synthetase gene in Saccharomyces cerevisiae

In the pyrimidine biosynthetic pathway, CTP synthetase catalyses the conversion of uridine 5-triphosphate (UTP) to cytidine 5-triphosphate (CTP). In the yeast Saccharomyces cerevisiae, the URA7 gene encoding this enzyme was previously shown to be nonessential for cell viability. The present paper describes the selection of synthetic lethal mutants in the CTP biosynthetic pathway that led us to clone a second gene, named URA8, which also encodes a CTP synthetase. Comparison of the predicted amino acid sequences of the products of URA7 and URA8 shows 78% identity. Deletion of the URA8 gene is viable in a haploid strain but simultaneous presence of null alleles both URA7 and URA8 is lethal. Based on the codon bias values for the two genes and the intracellular concentrations of CTP in strains deleted for one of the two genes, relative to the wild-type level, URA7 appears to be the major gene for CTP biosynthesis. Nevertheless, URA8 alone also allows yeast growth, at least under standard laboratory conditions.     

Polypeptone Induces Dramatic Cell Lysis in ura4 Deletion Mutants of Fission Yeast

Polypeptone is widely excluded from Schizosaccharomyces pombe growth medium. However, the reasons why polypeptone should be avoided have not been documented. Polypeptone dramatically induced cell lysis in the ura4 deletion mutant when cells approached the stationary growth phase, and this phenotype was suppressed by supplementation of uracil. To determine the specificity of this cell lysis phenotype, we created deletion mutants of other genes involved in de novo biosynthesis of uridine monophosphate (ura1, ura2, ura3, and ura5). Cell lysis was not observed in these gene deletion mutants. In addition, concomitant disruption of ura1, ura2, ura3, or ura5 in the ura4 deletion mutant suppressed cell lysis, indicating that cell lysis induced by polypeptone is specific to the ura4 deletion mutant. Furthermore, cell lysis was also suppressed when the gene involved in coenzyme Q biosynthesis was deleted. This is likely because Ura3 requires coenzyme Q for its activity. The ura4 deletion mutant was sensitive to zymolyase, which mainly degrades (1,3)-beta-D glucan, when grown in the presence of polypeptone, and cell lysis was suppressed by the osmotic stabiliser, sorbitol. Finally, the induction of cell lysis in the ura4 deletion mutant was due to the accumulation of orotidine-5-monophosphate. Cell wall integrity was dramatically impaired in the ura4 deletion mutant when grown in the presence of polypeptone. Because ura4 is widely used as a selection marker in S. pombe, caution needs to be taken when evaluating phenotypes of ura4 mutants.     

Split marker transformation increases homologous integration frequency in Cryptococcus neoformans

Gene disruption in Cryptococcus neoformans can be problematic due to high frequencies of ectopic integration and telomerization. To improve the frequency of homologous integration, a transformation strategy was employed called split marker, which utilizes a mixture of DNAs comprised of overlapping truncations of the selectable marker. Five genes were compared for homologous integration frequencies using various constructs. Homologous integration was highest when the split marker approach was used, with rates as high as 60% depending on target gene. A second factor that contributed to an increased homologous integration frequency was strain background, which was highest when a double auxotroph was used as a host. The split marker strategy was combined with an ura-blaster construct, which has been used in other fungi to recycle ura5 or ura3 mutations. When a hisG-URA5-hisG cassette was successfully integrated at the target locus, the URA5 gene could be easily evicted by plating onto 5-FOA agar. The cassette was then successfully used for a second cycle of transformation-eviction. The effectiveness of the split marker disruption strategy suggests that continued investigation and modification of traditional molecular techniques could increase the efficiency of C. neoformans molecular manipulation.     

Homologous gene knockout in the archaeon Halobacterium salinarum with ura3 as a counterselectable marker

To facilitate the functional genomic analysis of an archaeon, we have developed a homologous gene replacement strategy for Halobacterium salinarum based on ura3, which encodes the pyrimidine biosynthetic enzyme orotidine-5'-monophosphate decarboxylase. H. salinarum was shown to be sensitive to 5-fluoroorotic acid (5-FOA), which can select for mutations in ura3. A spontaneous 5-FOA-resistant mutant was found to contain an insertion in ura3 and was a uracil auxotroph. Integration of ura3 at the bacterioopsin locus (bop ) of this mutant restored 5-FOA sensitivity and uracil prototrophy. Parallel results were obtained with a Deltaura3 strain constructed by gene replacement and with derivatives of this strain in which ura3 replaced bop. These results show that H. salinarum ura3 encodes functional orotidine-5'-monophosphate decarboxylase. To demonstrate ura3-based gene replacement, a Deltabop strain was constructed by transforming a Deltaura3 host with a bop deletion plasmid containing a mevinolin resistance marker. In one approach, the host contained intact ura3 at the chromosomal bop locus; in another, ura3 was included in the plasmid. Plasmid integrants selected with mevinolin were resolved with 5-FOA, yielding Deltabop recombinants at a frequency of > 10-2 in both approaches. These studies establish an efficient new genetic strategy towards the systematic knockout of genes in an archaeon.     

利用可重复使用的URA3标记基因建立热带假丝酵母基因敲除系统

热带假丝酵母(Candida tropicalis)在发酵工业中具有重要的应用潜力,但二倍体遗传结构和较低的遗传转化效率限制了其代谢工程育种技术的应用。建立可靠的遗传转化技术并高效的删除目的基因是代谢工程改造热带假丝酵母的重要前提。文章以C. tropicalis ATCC 20336为出发菌株,通过化学诱变筛选获得了尿嘧啶缺陷型突变株C. tropicalis XZX(ura3/ura3)。以丙酮酸脱羧酶(Pyruvate decarboxylase,PDC)基因作为靶基因构建了两端包含同源臂并在选择性标记C. tropicalis URA3(Orotidine-5′-phosphate decarboxylase,乳清酸核苷-5-磷酸脱羧酶)基因两侧同向插入源于沙门氏菌(Salmonella typhimurium)的hisG序列的基因敲除盒PDC1-hisG-URA3-hisG- PDC1(PHUHP),并转化宿主菌株C. tropicalis XZX,筛选获得PHUHP片段正确整合到染色体的PDC基因位点的转化子XZX02。在此基础上,将转化子XZX02涂布于5-FOA(5-氟乳清酸)选择培养基上,筛选得到URA3基因从PHUHP片段中丢失的营养缺陷型菌株XZX03。进一步构建了第2个PDC等位基因的删除表达盒PDCm- URA3-PDCm,并转化C. tropicalis XZX03菌株,获得转化子C. tropicalis XZX04。经PCR和DNA测序确认转化子C. tropicalis XZX04细胞染色体上的两个PDC等位基因被成功敲除。文章建立了一种营养缺陷型标记可重复使用的热带假丝酵母遗传转化技术,利用该技术成功敲除了细胞的PDC基因,为进一步利用代谢工程改造热带假丝酵母奠定了基础。     

Fine structure of the URA2 locus in Saccharomyces cerevisiae. II. Meiotic and mitotic mapping studies.

Summary The URA2 locus codes for a multifunctional enzyme complex carrying aspartate transcarbamylase (ATCase) and carbamyl phosphate synthetase (CPSase) activities. Three different types of ura2 mutants were tested in meiotic and mitotic recombination experiments: ura2A mutants devoid of ATCase activity, ura2C mutants devoid of CPSase activity and ura2B mutants devoid of both activities. All the ura2C mutations were found to be clustered at one end of the URA2 locus, called zone A, while the ura2C mutations were localized in a region at the other end, called zone C. All but two ura2B mutations (most of them suppressible) were distributed throughout zone C; the two ura2B exceptions which are small deletions, mapped in zone A. On the meiotic as well as on the mitotic map an intermediary or dead-space zone is located between zones A and C. No mutation has yet been found to map in this zone. The relative lengths of the three zones A, intermediary and C are 1:2–3:3–4, respectively.These data are consistent with the hypothesis that the URA2 locus consisting of at least two cistrons: C (CPSase) and A (ATCase), is transcribed into a single polycistronic message in the direction C to A. However, alternative hypotheses in reference to Peterson and MacLaughlin's observations (1973) are discussed.This paper is dedicated to the memory of our friend and colleague Huguette de Robichon-Szulmajster     

Development of a transformation system for gene knock-out in the flavinogenic yeast Pichia guilliermondii

Pichia guilliermondii is a representative of a yeast species, all of which over-synthesize riboflavin in response to iron deprivation. Molecular genetic studies in this yeast species have been hampered by a lack of strain-specific tools for gene manipulation. Stable P. guilliermondii ura3 mutants were selected on the basis of 5'-fluoroorotic acid resistance. Plasmid carrying Saccharomyces cerevisiae URA3 gene transformed the mutant strains to prototrophy with a low efficiency. Substitution of a single leucine codon CUG by another leucine codon CUC in the URA3 gene increased the efficiency of transformation 100 fold. Deletion cassettes for the RIB1 and RIB7 genes, coding for GTP cyclohydrolase and riboflavin synthase, respectively, were constructed using the modified URA3 gene and subsequently introduced into a P. guilliermondii ura3 strain. Site-specific integrants were identified by selection for the Rib(-) Ura(+) phenotype and confirmed by PCR analysis. Transformation of the P. guilliermondii ura3 strain was performed using electroporation, spheroplasting or lithium acetate treatment. Only the lithium acetate transformation procedure provided selection of uracil prototrophic, riboflavin deficient recombinant strains. Depending on the type of cassette, efficiency of site-specific integration was 0.1% and 3-12% in the case of the RIB1 and RIB7 genes, respectively. We suggest that the presence of the ARS element adjacent to the 3' end of the RIB1 gene significantly reduced the frequency of homologous recombination. Efficient gene deletion in P. guilliermondii can be achieved using the modified URA3 gene of S. cerevisiae flanked by 0.8-0.9 kb sequences homologous to the target gene.     

Development of a URA5 integrative cassette for gene disruption in the Candida guilliermondii ATCC 6260 strain

We designed an efficient transformation system for Candida guilliermondii based on a ura5 ATCC 6260 derived recipient strain and a URA5 recyclable selection marker. This “URA5 blaster” disruption system represents a powerful tool to study the function of a large pallet of genes in this yeast of clinical and biotechnological interest.     

Development of an integrative DNA transformation system for the yeast Hansenula anomala

A host-vector system for the yeast Hansenula anomala was developed. The system was based on an auxotrophic mutant host of H. anomala which was defective in orotidine-5′-phosphate decarboxylase (ODCase) activity. The H. anomala ODCase-negative mutant strains (ura3 strains) were isolated based on 5-fluoroorotic acid (5-FOA) resistance. A plasmid vector containing the H. anomala URA3 gene was used for transformation. Using this plasmid, all of the H. anomala ura3 strains tested could be transformed to Ura⁺ phenotypes. In all of Ura⁺ transformants, the introduced plasmid was integrated into the chromosomal URA3 locus by homologous recombination. The Ura⁺ phenotype of the transformants was stably maintained after nonselective growth.