Selection of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> strains for efficient very high gravity bio-ethanol fermentation processes

An optimized very high gravity (VHG) glucose medium supplemented with low cost nutrient sources was used to evaluate bio-ethanol production by 11 Saccharomyces cerevisiae strains. The industrial strains PE-2 and CA1185 exhibited the best overall fermentation performance, producing an ethanol titre of 19.2% (v/v) corresponding to a batch productivity of 2.5 g l⁻¹ h⁻¹, while the best laboratory strain (CEN.PK 113-7D) produced 17.5% (v/v) ethanol with a productivity of 1.7 g l⁻¹ h⁻¹. The results presented here emphasize the biodiversity found within S. cerevisiae species and that naturally adapted strains, such as PE-2 and CA1185, are likely to play a key role in facilitating the transition from laboratory technological breakthroughs to industrial-scale bio-ethanol fermentations.     

Ethanol and xylitol production from glucose and xylose at high temperature by <Emphasis Type="Italic">Kluyveromyces</Emphasis> sp. IIPE453

A yeast strain Kluyveromyces sp. IIPE453 (MTCC 5314), isolated from soil samples collected from dumping sites of crushed sugarcane bagasse in Sugar Mill, showed growth and fermentation efficiency at high temperatures ranging from 45°C to 50°C. The yeast strain was able to use a wide range of substrates, such as glucose, xylose, mannose, galactose, arabinose, sucrose, and cellobiose, either for growth or fermentation to ethanol. The strain also showed xylitol production from xylose. In batch fermentation, the strain showed maximum ethanol concentration of 82 ± 0.5 g l⁻¹ (10.4% v/v) on initial glucose concentration of 200 g l⁻¹, and ethanol concentration of 1.75 ± 0.05 g l⁻¹ as well as xylitol concentration of 11.5 ± 0.4 g l⁻¹ on initial xylose concentration of 20 g l⁻¹ at 50°C. The strain was capable of simultaneously using glucose and xylose in a mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹, achieving maximum ethanol concentration of 38 ± 0.5 g l⁻¹ and xylitol concentration of 14.5 ± 0.2 g l⁻¹ in batch fermentation. High stability of the strain was observed in a continuous fermentation by feeding the mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹ by recycling the cells, achieving maximum ethanol concentration of 30.8 ± 6.2 g l⁻¹ and xylitol concentration of 7.35 ± 3.3 g l⁻¹ with ethanol productivity of 3.1 ± 0.6 g l⁻¹ h⁻¹ and xylitol productivity of 0.75 ± 0.35 g l⁻¹ h⁻¹, respectively.     

Characterization of Candida sp. NY7122, a novel pentose-fermenting soil yeast

Yeasts that ferment both hexose and pentose are important for cost-effective ethanol production. We found that the soil yeast strain NY7122 isolated from a blueberry field in Tsukuba (East Japan) could ferment both hexose and pentose (d-xylose and l-arabinose). NY7122 was closely related to Candida subhashii on the basis of the results of molecular identification using the sequence in the D1/D2 domains of 26S rDNA and 5.8S-internal transcribed spacer region. NY7122 produced at least 7.40 and 3.86 g l⁻¹ ethanol from 20 g l⁻¹ d-xylose and l-arabinose within 24 h. NY7122 could produce ethanol from pentose and hexose sugars at 37°C. The highest ethanol productivity of NY7122 was achieved under a low pH condition (pH 3.5). Fermentation of mixed sugars (50 g l⁻¹ glucose, 20 g l⁻¹ d-xylose, and 10 g l⁻¹ l-arabinose) resulted in a maximum ethanol concentration of 27.3 g l⁻¹ for the NY7122 strain versus 25.1 g l⁻¹ for Scheffersomyces stipitis. This is the first study to report that Candida sp. NY7122 from a soil environment could produce ethanol from both d-xylose and l-arabinose.     

High-level succinic acid production and yield by lactose-induced expression of phosphoenolpyruvate carboxylase in ptsG mutant Escherichia coli

Escherichia coli strains with foreign genes under the isopropyl-β-d-thiogalactopyranoside-inducible promoters such as lac, tac, and trc were engineered and considered as the promising succinic acid-producing bacteria in many reports. The promoters mentioned above could also be induced by lactose, which had not been attempted for succinic acid production before. Here, the efficient utilization of lactose as inducer was demonstrated in cultures of the ptsG, ldhA, and pflB mutant strain DC1515 with ppc overexpression. A fermentative process for succinic acid production at high level by this strain was developed. In flask anaerobic culture, 14.86 g l⁻¹ succinic acid was produced from 15 g l⁻¹ glucose with a yield of 1.51 mol mol⁻¹ glucose. In two-stage culture carried out in a 3-l bioreactor, the overall yield and concentration of succinic acid reached to 1.67 mol mol⁻¹ glucose and 99.7 g l⁻¹, respectively, with a productivity of 1.7 g l⁻¹ h⁻¹ in the anaerobic stage. The efficient utilization of lactose as inducer made recombinant E. coli a more capable strain for succinic acid production at large scale.     

<Emphasis Type="Italic">Clostridium beijerinckii</Emphasis> mutant with high inhibitor tolerance obtained by low-energy ion implantation

Clostridium beijerinckii mutant strain IB4, which has a high level of inhibitor tolerance, was screened by low-energy ion implantation and used for butanol fermentation from a non-detoxified hemicellulosic hydrolysate of corn fiber treated with dilute sulfuric acid (SAHHC). Evaluation of toxicity showed C. beijerinckii IB4 had a higher level of tolerance than parent strain C. beijerinckii NCIMB 8052 for five out of six phenolic compounds tested (the exception was vanillin). Using glucose as carbon source, C. beijerinckii IB4 produced 9.1 g l⁻¹ of butanol with an acetone/butanol/ethanol (ABE) yield of 0.41 g g⁻¹. When non-detoxified SAHHC was used as carbon source, C. beijerinckii NCIMB 8052 grew well but ABE production was inhibited. By contrast, C. beijerinckii IB4 produced 9.5 g l⁻¹ of ABE with a yield of 0.34 g g⁻¹, including 2.2 g l⁻¹ acetone, 6.8 g l⁻¹ butanol, and 0.5 g l⁻¹ ethanol. The remarkable fermentation and inhibitor tolerance of C. beijerinckii IB4 appears promising for ABE production from lignocellulosic materials.     

Continuous butanol production with reduced byproducts formation from glycerol by a hyper producing mutant of <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Butanol, a four-carbon primary alcohol (C₄H₁₀O), is an important industrial chemical and has a good potential to be used as a superior biofuel. Bio-based production of butanol from renewable feedstock is a promising and sustainable alternative to substitute petroleum-based fuels. Here, we report the development of a process for butanol production from glycerol, which is abundantly available as a byproduct of biodiesel production. First, a hyper butanol producing strain of Clostridium pasteurianum was isolated by chemical mutagenesis. The best mutant strain, C. pasteurianum MBEL_GLY2, was able to produce 10.8 g l⁻¹ butanol from 80 g l⁻¹ glycerol as compared to 7.6 g l⁻¹ butanol produced by the parent strain. Next, the process parameters were optimized to maximize butanol production from glycerol. Under the optimized batch condition, the butanol concentration, yield, and productivity of 17.8 g l⁻¹, 0.30 g g⁻¹, and 0.43 g l⁻¹ h⁻¹ could be achieved. Finally, continuous fermentation of C. pasteurianum MBEL_GLY2 with cell recycling was carried out using glycerol as a major carbon source at several different dilution rates. The continuous fermentation was run for 710 h without strain degeneration. The acetone–butanol–ethanol productivity and the butanol productivity of 8.3 and 7.8 g l⁻¹ h⁻¹, respectively, could be achieved at the dilution rate of 0.9 h⁻¹. This study reports continuous production of butanol with reduced byproducts formation from glycerol using C. pasteurianum, and thus could help design a bioprocess for the improved production of butanol.     

Selection of Saccharomyces pastorianus variants with improved fermentation performance under very high gravity wort conditions

Saccharomyces pastorianus FBY0095 was mutated and variants were selected for efficient very high gravity brewing using 15% (w/v) maltose and 15% (w/v) ethanol. Two useful variants were obtained of which one (L6) had growth, wort consumption and ethanol production rates of 0.036, 1.13 and 0.49 g l⁻¹ h⁻¹, respectively. The corresponding results for the wild type were 0.028, 0.98 and 0.4 g l⁻¹ h⁻¹, respectively. The vitality of the variant (expressed as acidification power) was 2.5 while that of the wild type was 2.3. There was also an obvious improvement on flavor of resulting beer when using L6 and the other variant.     

Bioethanol production in batch mode by a native strain of <Emphasis Type="Italic">Zymomonas mobilis</Emphasis>

Two wild strains of Zymomonas mobilis were isolated (named as ML1 and ML2) from sugar cane molasses obtained from different farms of Santander, Colombia. Initially, selection of the best ethanol-producer strains was carried out using ethanol production parameters obtained with a commercial strain Z. mobilis DSM 3580. Three isolated strains were cultivated in a culture medium containing yeast extract, peptone, glucose and salts, at pH 6 and 32°C with stirring rate of 65 rpm during 62 h. The best results of ethanol production were obtained with the native strain ML1, reaching a maximum ethanol concentration of 79.78 g l⁻¹. ML1 and ML2 strains were identified as Z. mobilis, according to the morphology, biochemical tests and molecular characterization by PCR of specific DNA sequences from Z. mobilis. Subsequently, the effect of different nitrogen sources on production of ethanol was evaluated. The best results were obtained using urea at a 0.73 g/l. In this case, maximum concentration of ethanol was 83.81 g l⁻¹, with kinetic parameters of yield of ethanol on biomass (Y_P/X) = 69.01(g g⁻¹), maximum volumetric productivity of ethanol (Qp_max) = 2.28 (g l⁻¹ h⁻¹), specific productivity of ethanol (q_P) = 3.54 (h⁻¹) and specific growth rate (μ) = 0.12 h⁻¹. Finally, we studied the effect of different culture conditions (pH, temperature, stirring, C/N ratio) with a Placket-Burman′s experimental design. This optimization indicated that the most significant variables were temperature and stirring. In the best culture conditions a significant increase in all variables of response was achieved, reaching a maximum ethanol concentration of 93.55 g l⁻¹.     

Utilization of dry distiller’s grain and solubles as nutrient supplement in the simultaneous saccharification and ethanol fermentation at high solids loading of corn stover

Dry distiller’s grain and solubles (DDGS) is a major by-product of corn-based ethanol production and is usually used as animal feed. Here, it was added to the simultaneous saccharification and ethanol fermentation (SSF) carried out at high solids loading of steam explosion pretreated corn stover using a mutant strain Saccharomyces cerevisiae DQ1. The performance of SSF process with DDGS was comparable to those using the expensive yeast extract supplementation. With 30% (w/w) solids plus the addition of cellulase and 1 g DDGS l⁻¹, the final ethanol reached 55 g l⁻¹ (7% v/v). The results indicated that the expensive supplement of yeast extract could be replaced by DDGS.     

Galactooligosaccharide production by a thermostable β-galactosidase from <Emphasis Type="Italic">Sulfolobus solfataricus</Emphasis>

A recombinant β-galactosidase from Sulfolobus solfataricus produced galactooligosaccharides (GOS) from lactose by transgalactosylation. The enzyme activity for GOS production was maximal at pH 6.0 and 85°C. The half-lives of the recombinant β-galactosidase at 70, 75, 80, 85, and 90°C were 700, 111, 72, 43, and 2.4 h, respectively, and its deactivation energy was 213 kJ mol⁻¹. The optimal amount of enzyme for effective GOS production was 3.6 U of enzyme ml⁻¹. GOS production increased with increasing lactose concentration, whereas the yield of GOS from lactose was almost constant. The rates of hydrolysis and transgalactosylation reactions increased with increasing temperature but the final concentration of GOS was maximal at 80°C. Under the conditions of pH 6.0, 80°C, 600 g lactose l⁻¹, and 3.6 U enzyme ml⁻¹, 315 g GOS l⁻¹ were obtained for 56 h with a yield of 52.5% (w/w). The β-galactosidase from S. solfataricus produced GOS with the highest concentration and yield among thermostable β-galactosidases reported to date.     

Metabolic evolution of non-transgenic <Emphasis Type="Italic">Escherichia coli</Emphasis> SZ420 for enhanced homoethanol fermentation from xylose

Efficient utilization of pentose sugars (xylose and arabinose) is an essential requirement for economically viable ethanol production from cellulosic biomass. The desirable pentose-fermenting ethanologenic biocatalysts are the native microorganisms or the engineered derivatives without recruited exogenous gene(s). We have used a metabolic evolution (adaptive selection) approach to improve a non-transgenic homoethanol Escherichia coli SZ420 (ldhA pflB ackA frdBC pdhR::pflBp6-aceEF-lpd) for xylose fermentation. An improved mutant, E. coli KC01, was evolved through a 3 month metabolic evolution process. This evolved mutant increased pyruvate dehydrogenase activity by 100%, cell growth rate (h⁻¹) by 23%, volumetric ethanol productivity by 65% and ethanol tolerance by 200%. These improvements enabled KC01 to complete 50 g xylose l⁻¹ fermentations with an ethanol titer of 23 g l⁻¹ and a yield of 90%. The improved cell growth and ethanol production of KC01 are likely attributed to its three fold increased ethanol tolerance.     

Alcoholic fermentation of xylose and mixed sugars using recombinant <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> engineered for xylose utilization

Previously, a Saccharomyces cerevisiae strain was engineered for xylose assimilation by the constitutive overexpression of the Orpinomyces xylose isomerase, the S. cerevisiae xylulokinase, and the Pichia stipitis SUT1 sugar transporter genes. The recombinant strain exhibited growth on xylose, under aerobic conditions, with a specific growth rate of 0.025 h⁻¹, while ethanol production from xylose was achieved anaerobically. In the present study, the developed recombinant yeast was adapted for enhanced growth on xylose by serial transfer in xylose-containing minimal medium under aerobic conditions. After repeated batch cultivations, a strain was isolated which grew with a specific growth rate of 0.133 h⁻¹. The adapted strain could ferment 20 g l⁻¹ of xylose to ethanol with a yield of 0.37 g g⁻¹ and production rate of 0.026 g l⁻¹ h⁻¹. Raising the fermentation temperature from 30°C to 35°C resulted in a substantial increase in the ethanol yield (0.43 g g⁻¹) and production rate (0.07 g l⁻¹ h⁻¹) as well as a significant reduction in the xylitol yield. By the addition of a sugar complexing agent, such as sodium tetraborate, significant improvement in ethanol production and reduction in xylitol accumulation was achieved. Furthermore, ethanol production from xylose and a mixture of glucose and xylose was also demonstrated in complex medium containing yeast extract, peptone, and borate with a considerably high yield of 0.48 g g⁻¹.     

Succinic acid production by a newly isolated bacterium

A new bacterial strain producing succinic acid was enriched from bovine rumen content. It is facultatively anaerobic, belongs to the family Pasteurellaceae and has similarity to the genus Mannheimia. In batch cultivations with D-glucose or sucrose the strain produced up to 5.8 g succinic acid l⁻¹ with a productivity and a yield of up to 1.5 g l⁻¹ h⁻¹ and 0.6 g g⁻¹, respectively. With crude glycerol up to 8.4 g l⁻¹, 0.9 g l⁻¹ h⁻¹ and 1.2 g g⁻¹ were obtained. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Optimization of probiotic and lactic acid production by Lactobacillus plantarum in submerged bioreactor systems

Biomass and lactic acid production by a Lactobacillus plantarum strain isolated from Serrano cheese, a microorganism traditionally used in foods and recognized as a potent probiotic, was optimized. Optimization procedures were carried out in submerged batch bioreactors using cheese whey as the main carbon source. Sequential experimental Plackett–Burman designs followed by central composite design (CCD) were used to assess the influence of temperature, pH, stirring, aeration rate, and concentrations of lactose, peptone, and yeast extract on biomass and lactic acid production. Results showed that temperature, pH, aeration rate, lactose, and peptone were the most influential variables for biomass formation. Under optimized conditions, the CCD for temperature and aeration rate showed that the model predicted maximal biomass production of 14.30 g l⁻¹ (dw) of L. plantarum. At the central point of the CCD, a biomass of 10.2 g l⁻¹ (dw), with conversion rates of 0.10 g of cell g⁻¹ lactose and 1.08 g lactic acid g⁻¹ lactose (w/w), was obtained. These results provide useful information about the optimal cultivation conditions for growing L. plantarum in batch bioreactors in order to boost biomass to be used as industrial probiotic and to obtain high yields of conversion of lactose to lactic acid.     

Fungal autolysate as a nutrient supplement for ethanol and chitosan production by <Emphasis Type="Italic">Mucor indicus</Emphasis>

Mucor indicus can be used to produce ethanol from a variety of sugars, including pentose’s. An extract of it, produced by autolysis, could replace yeast extract in culture medium with improved production of ethanol. At 10 g l⁻¹, the extract gave a higher ethanol yield (0.47 g g⁻¹) and productivity (0.71 g l⁻¹ h⁻¹) compared to medium containing yeast extract (yield 0.45 g g⁻¹; productivity 0.67 g l⁻¹ h⁻¹).     

Application of oscillation for efficiency improvement of continuous ethanol fermentation with Saccharomyces cerevisiae under very-high-gravity conditions

Compared with steady state, oscillation in continuous very-high-gravity ethanol fermentation with Saccharomyces cerevisiae improved process productivity, which was thus introduced for the fermentation system composed of a tank fermentor followed by four-stage packed tubular bioreactors. When the very-high-gravity medium containing 280 g l⁻¹ glucose was fed at the dilution rate of 0.04 h⁻¹, the average ethanol of 15.8% (v/v) and residual glucose of 1.5 g l⁻¹ were achieved under the oscillatory state, with an average ethanol productivity of 2.14 g h⁻¹ l⁻¹. By contrast, only 14.8% (v/v) ethanol was achieved under the steady state at the same dilution rate, and the residual glucose was as high as 17.1 g l⁻¹, with an ethanol productivity of 2.00 g h⁻¹ l⁻¹, indicating a 7% improvement under the oscillatory state. When the fermentation system was operated under the steady state at the dilution rate of 0.027 h⁻¹ to extend the average fermentation time to 88 h from 59 h, the ethanol concentration increased slightly to 15.4% (v/v) and residual glucose decreased to 7.3 g l⁻¹, correspondingly, but the ethanol productivity was decreased drastically to 1.43 g h⁻¹ l⁻¹, indicating a 48% improvement under the oscillatory state at the dilution rate of 0.04 h⁻¹.     

Efficient production of ectoine using ectoine-excreting strain

Halophilic bacteria strain Halomonas salina DSM 5928 was found to excrete ectoine, suggesting its potential in the development of a new method of ectoine production. We performed HPLC and LC–MS analyses that showed that Halomonas salina DSM 5928 excreted ectoine under constant extracellular osmolarity. Medium adopting monosodium glutamate as a sole source of carbon and nitrogen was beneficial for ectoine synthesis. The total concentration of ectoine was not affected by NaCl concentration in the range 0.5–2 mol l⁻¹. The total concentration of ectoine and productivity in a 10-l fermentor with 0.5 mol l⁻¹ NaCl were 6.9 g l⁻¹ and 7.9 g l⁻¹ d⁻¹, respectively. These findings show that Halomonas salina DSM 5928 efficiently produces ectoine at relatively low NaCl concentration. This research also indicates the potential application of free or immobilized cells for continuous culture to produce ectoine.     

Dynamic microbial response under ethanol stress to monitor <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> activity in different initial physiological states

Dynamic Saccharomyces cerevisiae responses to increasing ethanol stresses were investigated to monitor yeast viability and to optimize bioprocess performance when gradients occurred due to the specific configuration of multi-stage bioreactors with cell recycling or of large volume industrial bioreactors inducing chemical heterogeneities. Twelve fed-batch cultures were carried out with initial ethanol concentrations (P _in) ranging from 5 g l⁻¹ to 110 g l⁻¹ with three different inoculums in different physiological states in terms of viability and quantity of ethanol produced (P _o). For a given initial cell viability of 50%, the time to reach the maximum growth rate and maximum ethanol production rate was dependent on the difference P _in − P _o. Whatever the initial physiological state, when the initial ethanol concentration P _in reached 100 g l⁻¹, the yeasts died. Experimental results showed that the initial physiological state of the yeast was the major parameter to determine, the microorganisms’ capacities to adapt and resist environmental changes.     

1,3-Propanediol production in a two-step process fermentation from renewable feedstock

In this work, the production of 1,3-propanediol from glucose and molasses was studied in a two-step process using two recombinant microorganisms. The first step of the process is the conversion of glucose or other sugar into glycerol by the metabolic engineered Saccharomyces cerevisiae strain HC42 adapted to high (>200 g l⁻¹) glucose concentrations. The second step, carried out in the same bioreactor, was performed by the engineered strain Clostridium acetobutylicum DG1 (pSPD5) that converts glycerol to 1,3-propanediol. This two-step strategy led to a flexible process, resulting in a 1,3-propanediol production and yield that depended on the initial sugar concentration. Below 56.2 g l⁻¹ of sugar concentration, cultivation on molasses or glucose showed no significant differences. However, at higher molasses concentrations, glycerol initially produced by yeast could not be totally converted into 1,3-propanediol by C. acetobutylicum and a lower 1,3-propanediol overall yield was observed. In our hand, the best results were obtained with an initial glucose concentration of 103 g l⁻¹, leading to a final 1,3-propanediol concentration of 25.5 g l⁻¹, a productivity of 0.16 g l⁻¹ h⁻¹ and 1,3-propanediol yields of 0.56 g g⁻¹ glycerol and 0.24 g g⁻¹ sugar, which is the highest value reported for a two-step process. For an initial sugar concentration (from molasses) of 56.2 g l⁻¹, 27.4 g l⁻¹ of glycerol were produced, leading to 14.6 g l⁻¹ of 1.3-propanediol and similar values of productivity, 0.15 g l⁻¹ h⁻¹, and overall yield, 0.26 g g⁻¹ sugar.     

Dielectric barrier discharge plasma as a novel approach for improving 1,3-propanediol production in <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

Dielectric barrier discharge plasma was used to generate a stable strain of Klebsiella pneumoniae (designated to as Kp-M2) with improved 1,3-propanediol production. The specific activities of glycerol dehydrogenase, glycerol dehydatase and 1,3-propanediol oxidoreductase in the crude cell extract increased from 0.11, 9.2 and 0.15 U mg⁻¹, respectively, for wild type to 0.67, 14.4 and 1.6 U mg⁻¹ for Kp-M2. The glycerol flux of Kp-M2 was redistributed with the flux to the reductive pathway being increased by 20% in batch fermentation. The final 1,3-propanediol concentrations achieved by Kp-M2 in batch and fed-batch fermentations were 19.9 and 76.7 g l⁻¹, respectively, which were higher than those of wild type (16.2 and 49.2 g l⁻¹). The results suggested that dielectric barrier discharge plasma could be used as an effective approach to improve 1,3-propanediol production in K. pneumoniae.