Reduction-Responsive Disassemblable Core-Cross-Linked Micelles Based on Poly(ethylene glycol)-b-poly(N-2-hydroxypropyl methacrylamide)-Lipoic Acid Conjugates for Triggered Intracellular Anticancer Drug Release

Reduction-sensitive reversibly core-cross-linked micelles were developed based on poly(ethylene glycol)-b-poly(N-2-hydroxypropyl methacrylamide)-lipoic acid (PEG-b-PHPMA-LA) conjugates and investigated for triggered doxorubicin (DOX) release. Water-soluble PEG-b-PHPMA block copolymers were obtained with M(n,PEG) of 5.0 kg/mol and M(n,HPMA) varying from 1.7 and 4.1 to 7.0 kg/mol by reversible addition-fragmentation chain transfer (RAFT) polymerization. The esterification of the hydroxyl groups in the PEG-b-PHPMA copolymers with lipoic acid (LA) gave amphiphilic PEG-b-PHPMA-LA conjugates with degrees of substitution (DS) of 71-86%, which formed monodispersed micelles with average sizes ranging from 85.3 to 142.5 nm, depending on PHPMA molecular weights, in phosphate buffer (PB, 10 mM, pH 7.4). These micelles were readily cross-linked with a catalytic amount of dithiothreitol (DTT). Notably, PEG-b-PHPMA(7.0k)-LA micelles displayed superior DOX loading content (21.3 wt %) and loading efficiency (90%). The in vitro release studies showed that only about 23.0% of DOX was released in 12 h from cross-linked micelles at 37 °C at a low micelle concentration of 40 μg/mL, whereas about 87.0% of DOX was released in the presence of 10 mM DTT under otherwise the same conditions. MTT assays showed that DOX-loaded core-cross-linked PEG-b-PHPMA-LA micelles exhibited high antitumor activity in HeLa and HepG2 cells with low IC(50) (half inhibitory concentration) of 6.7 and 12.8 μg DOX equiv/mL, respectively, following 48 h incubation, while blank micelles were practically nontoxic up to a tested concentration of 1.0 mg/mL. Confocal laser scanning microscope (CLSM) studies showed that DOX-loaded core-cross-linked micelles released DOX into the cell nuclei of HeLa cells in 12 h. These reduction-sensitive disassemblable core-cross-linked micelles with excellent biocompatibility, superior drug loading, high extracellular stability, and triggered intracellular drug release are promising for tumor-targeted anticancer drug delivery.     

Core-cross-linked polymeric micelles as paclitaxel carriers

Cross-linkable di- and triblock copolymers of poly(epsilon-caprolactone) (PCL) and monomethoxyl poly(ethylene glycol) (MPEG) were synthesized. These amphiphilic copolymers self-assembled into nanoscale micelles capable of encapsulating hydrophobic paclitaxel in their hydrophobic cores in aqueous solutions. To further enhance their thermodynamic stability, the micelles were cross-linked by radical polymerization of the double bonds introduced into the PCL blocks. Reaction conditions were found to significantly affect both the cross-linking efficiency and the micelle size. The encapsulation of paclitaxel into the micelles was confirmed by the proton nuclear magnetic resonance (1H NMR) spectroscopy. Encouragingly, paclitaxel-loading efficiency of micelles was enhanced significantly upon micelle core-cross-linking. Both the micelle size and the drug loading efficiency increased markedly with increasing the PCL block lengths, no matter if the micelles were core-cross-linked or not. However, paclitaxel-loading did not obviously affect the micelle size or size distribution. The cross-linked micelles exhibited a significantly enhanced thermodynamic stability against dilution with aqueous solvents. The efficient cellular uptake of paclitaxel loaded in the nanomicelles was demonstrated by confocal laser scanning microscopy (CLSM) imaging. This new biodegradable nanoscale carrier system merits further investigations for parenteral drug delivery.     

Acid-labile core cross-linked micelles for pH-triggered release of antitumor drugs

Micelles of a model amphiphilic block copolymer, poly(hydroxyethyl acrylate)-block-poly(n-butyl acrylate) (PHEA-b-PBA), synthesized via the RAFT polymerization were cross-linked by copolymerization of a degradable cross-linker from the living RAFT-end groups of PBA chains, yielding a cross-linked core without affecting significantly the original micelle size. The cross-linker incorporation into the micelles was evidenced via physicochemical analysis of the copolymer unimers formed upon acidic cleavage of the cross-linked micelles. High doxorubicin loading capacities (60 wt %) were obtained. Hydrolysis of less than half of the cross-links in the core was found to be sufficient to release doxorubicin faster at acidic pH compared to neutral pH. The system represents the first example of core-cross-linked micelles that can be destabilized (potentially both above and below CMC) by the pH-dependent cleavage of the cross-links and the subsequent polarity change in the core to enable the release of hydrophobic drugs entrapped inside the micelle.     

Shell-cross-linked micelles containing cationic polymers synthesized via the RAFT process: toward a more biocompatible gene delivery system

Block copolymers poly(2-(dimethylamino) ethyl methacrylate)-b-poly(polyethylene glycol methacrylate) (PDMAEMA-b-P(PEGMA)) were prepared via reversible addition fragmentation chain transfer polymerization (RAFT). The polymerization was found to proceed with the expected living behavior resulting in block copolymers with varying block sizes of low polydispersity (PDI <1.3). The resulting block copolymer was self-assembled in an aqueous environment, leading to the formation of pH-responsive micelles. Further stabilization of the micellar system was performed in water using ethylene glycol dimethacrylate and the RAFT process to cross-link the shell. The cross-linked micelle was found to have properties significantly different from those of the uncross-linked block copolymer micelle. While a distinct critical micelle concentration (CMC) was observed using block copolymers, the CMC was absent in the cross-linked system. In addition, a better stability against disintegration was observed when altering the ionic strength such as the absence of changes of the hydrodynamic diameter with increasing NaCl concentration. Both cross-linked and uncross-linked micelles displayed good binding ability for genes. However, the cross-linked system exhibited a slightly superior tendency to bind oligonucleotides. Cytotoxicity tests confirmed a significant improvement of the biocompatibility of the synthesized cross-linked micelle compared to that of the highly toxic PDMAEMA. The cross-linked micelles were taken up by cells without causing any signs of cell damage, while the PDMAEMA homopolymer clearly led to cell death.     

Effect of cross-linking on the performance of micelles as drug delivery carriers: a cell uptake study

Poly(polyethylene glycol methyl ether methacrylate-co-methacrylic acid)-block-poly(methyl methacrylate) P(PEGMEMA-co-MAA)-b-PMMA block copolymer were prepared via RAFT (reversible addition-fragmentation chain transfer) polymerization and subsequently self-assembled into micelles as a drug delivery carrier for albendazole (ABZ). For comparison, the micelles were additionally cross-linked to study the effect of shell-cross-linking on the biological activity. The hydrodynamic diameter of cross-linked and un-cross-linked micelles was approximately 40 nm in both cases. While the cross-linked micelle was stable even in good solvents for both blocks, the un-cross-linked micelle was found to lose its integrity in cell growth media. Crosslinking had a major effect on the rate of drug release reducing it dramatically from 50% (uncrosslinked) to around 20% (crosslinked) over a 30 h incubation period. Both drug delivery systems were tested on human prostate cancer cells (PC-3, DU-145) and human ovarian cancer cells (OVCAR-3, A-2780). No toxic effects were measured with the unloaded micelle while the ABZ loaded un-cross-linked micelle lead to IC(50) values between 0.2 and 0.9 μM depending on the cell line. The IC(50) dropped to values between 0.006 and 0.06 μM, depending on cell line, once the micelles were stabilized by cross-linking. Three treatment cycles with ABZ for one day, followed by two days incubation in media using ABZ-loaded drug carriers led to complete cell death even at low concentrations in the case of the cross-linked micelle only. Cellular uptake has been studied using fluorescently labeled micelles and Nile red as model drug, showing cell uptake above the CMC but no micelle uptake below the CMC. Additional biological studies, such as colony formation assay and tubulin disorganization tests, were also performed to gain more insight into the effect of cross-linking of the shell of the micelle. In conclusion, shell-cross-linking is highly recommended, even for glassy micelles, for an efficient cellular uptake at low concentrations.     

Enhanced stability of core-surface cross-linked micelles fabricated from amphiphilic brush copolymers

"Stealth" nanoparticles made from polymer micelles have been widely explored as drug carriers for targeted drug delivery. High stability (i.e., low critical micelle concentration (CMC)) is required for their intravenous applications. Herein, we present a "core-surface cross-linking" concept to greatly enhance nanoparticle's stability: amphiphilic brush copolymers form core-surface cross-linked micelles (nanoparticles) (SCNs). The amphiphilic brush copolymers consisted of hydrophobic poly(epsilon-caprolactone) (PCL) and hydrophilic poly(ethylene glycol) (PEG) or poly(2-(N,N-dimethylamino)ethyl methacrylate) (PDMA) chains were synthesized by macromonomer copolymerization method and used to demonstrate this concept. The resulting SCNs were about 100 times more stable than micelles from corresponding amphiphilic block copolymers. The size and surface properties of the SCNs could be easily tailored by the copolymer's compositions.     

One-pot conversion of RAFT-generated multifunctional block copolymers of HPMA to doxorubicin conjugated acid- and reductant-sensitive crosslinked micelles

N-(2-Hydroxypropyl)methacrylamide (HPMA) containing polymers that are widely used as anticancer drug carriers. We have synthesized new amphiphilic block copolymers of HPMA with a functional monomer 2-(2-pyridyldisulfide)ethylmethacrylate (PDSM) via reversible addition-fragmentation chain transfer (RAFT) polymerization. In a one-pot reaction, the versatility of PDS groups on poly(PDSM)- b-poly(HPMA) was used to conjugate an anticancer drug, doxorubicin (DOX), and also simultaneously crosslink the micellar assemblies via acid-cleavable hydrazone bonds and reducible disulfide bonds. DOX-conjugated crosslinked micelles with an average diameter of approximately 60 nm were observed to be formed in aqueous medium. Disintegration of the micelles into unimers in the presence of a disulfide reducing agent confirmed the crosslinking via disulfide bonds. While the release of DOX from the crosslinked micelles at pH 5.0 was faster compared to the release at pH 7.4, a high proportion of released DOX was found to retain the original active structure. Overall results demonstrate the simplicity and the versatility of the poly(PDSM)- b-poly(HPMA) system, which are potentially important in the design of new generation of polymer therapeutics.     

大肠杆菌L-酒石酸脱氢酶b亚基体外分子交联

通过PCR技术扩增大肠杆菌L-酒石酸脱氢酶b亚基(L-tartrate dehydratase beta subunit, TtdB)野生型与Cys/Ser突变型目的基因, 构建带6×His标签的诱导型表达载体pTrcHisC-TtdB。重组蛋白以包含体形式存在, 应用TALON固定化金属亲和树脂(Immobilized metal affinity chromatography, IMAC)以变性的方法纯化, 通过分步透析逐步去除变性剂的方法复性, 复性率可达70%。将复性后的两种蛋白通过热诱导去折叠和氧化重折叠方法进行体外蛋白质分子交联实验。SDS-PAGE分析表明: 野生型TtdB在其变性的临界温度反应时, 出现交联二聚体和多聚体; 在氧化重折叠后SDS-PAGE前加入100 mmol/L DTT时, 交联强度明显减弱。这种DTT打不开的交联即为异肽键交联; 若在其氧化重折叠反应液中加入DTT则没有任何交联。突变型TtdB在与野生型TtdB相同的热诱导去折叠条件下, 完全没有二聚体和多聚体的形成。     

Chemical cross-linking reveals a dimeric structure for CTP:phosphocholine cytidylyltransferase

CTP:phosphacholine cytidylyltransferase (EC 2.7.7.15) was purified from rat liver according to the method of Weinhold et al. (Weinhold, P. A., Rounsifer, M. E., and Feldman, D. A. (1986) J. Biol. Chem. 261, 5104-5110). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis with or without beta-mercaptoethanol revealed a single major band of 42,000 daltons. This band corresponds to the 45-kDa catalytic subunit isolated by Feldman and Weinhold (Feldman, D. A., and Weinhold, P. A. (1987) J. Biol. Chem. 262, 9075-9081). A minor component of 84,000 daltons was intensified in nonreducing gels when the sulfhydryl reducing agent, dithiothreitol, was removed from the enzyme preparation by dialysis. Reduction with dithiothreitol and electrophoresis in the second dimension showed that this 84-kDa protein was derived from the 42-kDa protein. This result suggested that the 42 kDa protein can be converted to an 84-kDa protein by disulfide bond formation. Reaction with the thiol-cleavable cross-linking reagents, dithiobis(succimidyl propionate) or dimethyl-3,3'-dithiobispropionimidate, converted the 42-kDa cytidylyltransferase subunit into a diffuse band approximately twice its molecular mass. Disulfide reduction and electrophoresis in the second dimension showed that this band was derived exclusively from the 42-kDa subunit. This cross-linking pattern was observed when cytidylyltransferase was bound to a Triton X-100 micelle or when bound to a membrane vesicle containing phosphatidylcholine, oleic acid, and Triton X-100. Reaction of the fully reduced enzyme with glutaraldehyde also generated a cross-linked dimer. All three cross-linking reagents inactivated the enzyme. Reduction of the disulfide cross-linkers with dithiothreitol partially reactivated the transferase. When Triton was removed from the enzyme preparation by DEAE-Sepharose chromatography, reaction of the detergent-depleted enzyme with glutaraldehyde generated a band corresponding to a hexamer and higher molecular weight aggregates. The dimeric form was regenerated by addition of either Triton X-100 or phosphatidylcholine-oleic acid vesicles. We conclude that the purified, native cytidylyltransferase, when bound to a detergent micelle or membrane vesicle, is a dimer composed of two noncovalently linked 42-kDa subunits. In the absence of a membrane or micelle, the dimers self-aggregate in a reversible manner.     

Identification of bull protamine disulfides

We have identified the disulfide cross-links in bull protamine by titrating intact bull sperm with dithiothreitol (DTT) and following the modification of each cysteine residue with tritiated iodoacetate. The derivatization of each cysteine was monitored by a combination of HPLC, peptide mapping, and protein sequencing. Analyses of total free sulfhydryls show that all seven of the bull protamine cysteines are cross-linked as disulfides in mature sperm. The first disulfide is reduced at a DTT:protamine cysteine (DTT:Cys) ratio of 0.3 and the last at a ratio of 2.0. Intra- and intermolecular disulfides were identified by correlating the reduction of specific disulfides with the dissociation of protamine from DNA in partially reduced sperm and sperm treated with N,N'-ethylenedimaleimide, a bifunctional disulfide cross-linking agent. Three intermolecular and two intramolecular disulfides were identified. The results of these experiments demonstrate that the amino- and carboxy-terminal ends of the bull protamine molecule are folded inward toward the center of the molecule and are locked in place, each by a single intramolecular disulfide bridge. Three intermolecular disulfides cross-link neighboring protamine molecules around the DNA helix in such a manner that the protamines cannot be dissociated from DNA without first reducing the interprotamine disulfides.     

Fabrication of multiresponsive shell cross-linked micelles possessing pH-controllable core swellability and thermo-tunable corona permeability

A double hydrophilic ABC triblock copolymer, poly(2-(diethylamino)ethyl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate)-b-poly(N-isopropylacrylamide) (PDEA-b-PDMA-b-PNIPAM), containing the well-known pH-responsive PDEA block and thermoresponsive PNIPAM block, was synthesized by atom transfer radical polymerization via sequential monomer addition using ethyl 2-chloropropionate as the initiator. The obtained triblock copolymer exhibits interesting "schizophrenic" micellization behavior in aqueous solution, and supramolecularly self-assembles into three-layer "onion-like" PNIPAM-core micelles at acidic pH's and elevated temperatures and PDEA-core micelles with "inverted" structures at alkaline pH's and room temperature. In both cases, dynamic laser light scattering (LLS) and optical transmittance reveal the presence of near-monodisperse micelles, and the micelle formation/inversion process is fully reversible. Novel shell cross-linked (SCL) micelles with pH-responsive PDEA cores and thermoresponsive PNIPAM coronas were then facilely fabricated from the PDEA-b-PDMA-b-PNIPAM triblock copolymer by cross-linking the PDMA inner shells with 1,2-bis(2-iodoethoxy)ethane. The reversible pH-dependent swelling/shrinking of PDEA cores and thermosensitive collapse/aggregation of PNIPAM coronas of the obtained SCL micelles were investigated in detail by dynamic LLS, optical transmittance, and transmission electron microscopy. As the structurally stable SCL micelles possess pH-controllable core swellability and thermo-tunable corona permeability, the release profile of a model hydrophobic drug, dipyridamole, initially loaded within the hydrophobic PDEA core, can be dually controlled by both the solution pH and the temperature. This represents the first report of SCL micelles with multiresponsive cores and coronas, which may find practical applications in fields such as drug delivery and smart release.     

Efficient gene transfer using reversibly cross-linked low molecular weight polyethylenimine.

Polyethylenimine (PEI) is a polycation with potential application as a nonviral vector for gene delivery. Here we show that after conjugation with homobifunctional amine reactive reducible cross-linking reagents, low molecular weight polyethylenimine efficiently mediates in vitro gene delivery to Chinese hamster ovary (CHO) cells. Two cross-linking reagents, dithiobis(succinimidylpropionate) (DSP) and dimethyl.3,3'-dithiobispropionimidate*2HCl (DTBP), were utilized based on their reactivity and chemical properties. Both reagents react with primary amines to form reducible cross-links; however, unlike DSP, the DTBP cross-linker maintains net polymer charge through amidine bond formation. PEI with a reported weight-average molecular weight (M(w)) of 800 Da was reacted with either DSP or DTBP at PEI primary amine:cross-link reactive group ratios of 1:1 and 2:1. The transfection efficiencies of the resulting cross-linked products were evaluated in CHO cells using a luciferase reporter gene under a cytomegalovirus (CMV) promoter. Our results show that cross-linked polymers mediate variable levels of transfection depending on the cross-linking reagent, the extent of conjugation, and the N/P ratio. In general, we found conjugate size to be proportional to gene transfer efficiency. Using gel retardation analysis, we also evaluate the capacity of the cross-linked polymers to condense plasmid DNA before and after reduction with 45 mM dithiothreitol (DTT). DTT mediated reduction of intra-cross-link disulfide bonds and inhibited condensation of DNA by conjugates cross-linked with DSP at a ratio of 1:1, but had little effect on the remaining polymers. Analogous intracellular reduction of transfection complexes by reduced glutathione could facilitate uncoupling of PEI from DNA to enhance gene expression.     

Stabilization of disulfide linkage in drug-polymer-immunoglobulin conjugate by microenvironmental control

The stability of disulfide linkage in the conjugate composed of the anti-cancer agent adriamycin, poly(ethylene glycol)-poly(aspartic acid) block copolymer, and immunoglobulin G was studied. The disulfide linkage between the block copolymer and immunoglobulin G was found to be resistant to reduction with dithiothreitol (DTT). This extraordinary resistance is considered to be brought about by steric hindrance of the poly(aspartic acid) chain binding adriamycin.     

Interchain disulfide bonds promote protein cross-linking during protein folding

We provide evidence that in vitro protein cross-linking can be accomplished in three concerted steps: (i) a change in protein conformation; (ii) formation of interchain disulfide bonds; and (iii) formation of interchain isopeptide cross-links. Oxidative refolding and thermal unfolding of ribonuclease A, lysozyme, and protein disulfide isomerase led to the formation of cross-linked dimers/oligomers as revealed by SDS-polyacrylamide gel electrophoresis. Chemical modification of free amino groups in these proteins or unfolding at pH < 7.0 resulted in a loss of interchain isopeptide cross-linking without affecting interchain disulfide bond cross-linking. Furthermore, preformed interchain disulfide bonds were pivotal for promoting subsequent interchain isopeptide cross-links; no dimers/oligomers were detected when the refolding and unfolding solution contained the reducing agent dithiothreitol. Similarly, the Cys326Ser point mutation in protein disulfide isomerase abrogated its ability to cross-link into homodimers. Heterogeneous proteins become cross-linked following the formation of heteromolecular interchain disulfide bonds during thermal unfolding of a mixture of of ribonuclease A and lysozyme. The absence of glutathione and glutathione disulfide during the unfolding process attenuated both the interchain disulfide bond cross-links and interchain isopeptide cross-links. No dimers/oligomers were detected when the thermal unfolding temperature was lower than the midpoint of thermal denaturation temperature.     

Disulfide cross-linked polymer capsules: en route to biodeconstructible systems

Hydrogen-bonded multilayer thin films were constructed using poly(vinylpyrrolidone) and poly(methacrylic acid) functionalized with cysteamine. The resulting films included thiol moieties that were cross-linked to render the films stable at physiological pH. Film buildup was followed using quartz crystal microgravimetry, which was also used to demonstrate the improved stability imparted by reacting the thiol moieties to form disulfide bonds. Films without disulfide bonds were readily deconstructed at physiological pH, while those with disulfide bonds were swollen upon exposure to this pH (7) but remained intact. Addition of a common thiol-disulfide exchange reagent, dithiothreitol (DTT) at pH 7 led to disassembly of the multilayer films. The films were also prepared on colloidal substrates (as demonstrated using confocal microscopy) and were used to retain a model drug (fluorescently labeled transferrin) and release this molecule when triggered by the addition of DTT. This approach has potential for the in vivo applications of hollow capsules, as thiol-disulfide exchange leading to deconstruction of the capsules can occur with the assistance of intracellular proteins.     

Preparation of bionanoreactor based on core-shell structured polyion complex micelles entrapping trypsin in the core cross-linked with glutaraldehyde

Recently, the polyion complex (PIC) micelle has been suggested as a promising carrier system for peptide and proteins. However, its utilities are limited by its sensitivity to the environment such as dilution and ionic strength of the solution. In this study, to overcome these obstructions, PIC micelles prepared from an anionic block copolymer, poly(ethylene glycol)-poly(alpha,beta-aspartic acid), and a cationic protein, trypsin, were cross-linked with glutaraldehyde through the Schiff base formation. On the basis of a light scattering technique, the results revealed an efficient resistance of the cross-linked PIC micelle to a high salt concentration, which was a key parameter controlling the structure of the PIC micelles. Moreover, the stability of trypsin after cross-linking was remarkably improved. Evidently, as a bionanoreactor and/or bionanoreservoir, the PIC micelles entrapping protein molecules in the cross-linked core reveal an improved stability, allowing their wide application in the fields of biotechnology and pharmaceutical sciences.     

Disulfide cross-linked hyaluronan hydrogels

A new disulfide cross-linking strategy was developed to prepare hyaluronic acid (HA) hydrogel from thiol-modified HA. First, dithiobis(propanoic dihydrazide) (DTP) and dithiobis(butyric dihydrazide) (DTB) were synthesized and then coupled to HA with carbodiimide chemistry. Next, disulfide bonds of the initially formed gel were reduced using dithiothreitol (DTT) to give, after exhaustive dialysis, the corresponding thiol-modified macromolecular derivatives HA-DTPH and HA-DTBH. The degree of substitution of HA-DTPH and HA-DTBH could be controlled from 20% to 70% of available glucuronate carboxylic acid groups. The pK(a) values of the HA-thiol derivatives were determined spectrophotometrically to be pK(a) = 8.87 (HA-DTPH) and pK(a) = 9.01 (HA-DTBH). The thiol groups could be oxidized in air to reform disulfide linkages, which resulted in HA-DTPH and HA-DTBH hydrogel films. Further oxidation of these hydrogels with dilute H(2)O(2) created additional cross-links and afforded poorly swellable films. The disulfide cross-linking was reversible, and films could be again reduced to sols with DTT. Release of blue dextran from cross-linked films was used as a model for drug release. The rapid gelation of the HA-DTPH solution under physiological conditions was also achieved, which demonstrated the capacity for in situ cell encapsulation. Thus, L-929 murine fibroblasts were encapsulated in HA-DTPH hydrogel; these cells remained viable and proliferated during 3 days of culture in vitro.     

Synthesis of well-defined amphiphilic block copolymers having phospholipid polymer sequences as a novel biocompatible polymer micelle reagent

To realize safer and effective drug administration, novel well-defined and biocompatible amphiphilic block copolymers containing phospholipid polymer sequences were synthesized. At first, the homopolymer of 2-methacryloyloxyethylphosphorylcholine (MPC) was synthesized in water by reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization. The "living" polymerization was confirmed by the fact that the number-average molecular weight increased linearly with monomer conversion while the molecular weight distribution remained narrow independent of the conversion. The poly(MPC) thus prepared is end-capped with a dithioester moiety. Using the dithioester-capped poly(MPC) as a macro chain transfer agent, AB diblock copolymers of MPC and n-butyl methacrylate (BMA) were synthesized. Associative properties of the amphiphilic block copolymer (pMPC(m)-BMA(n)) with varying poly(BMA) block lengths were investigated using NMR, fluorescence probe, static light scattering (SLS), and quasi-elastic light scattering (QELS) techniques. Proton NMR data in D2O indicated highly restricted motions of the n-butyl moieties, arising from hydrophobic associations of poly(BMA) blocks. Fluorescence spectra of N-phenyl-1-naphthylamine indicated that the probes were solubilized in the polymer micelles in water. The formation of polymer micelles comprising a core with poly(BMA) blocks and shell with hydrophilic poly(MPC) blocks was suggested by SLS and QELS data. The size and mass of the micelle increased with increasing poly(BMA) block length. With an expectation of a pharmaceutical application of pMPC(m)-BMA(n), solubilization of a poorly water-soluble anticancer agent, paclitaxel (PTX), was investigated. PTX dissolved well in aqueous solutions of pMPC(m)-BMA(n) as compared with pure water, implying that PTX is incorporated into the hydrophobic core of the polymer micelle. Since excellent biocompatible poly(MPC) sequences form an outer shell of the micelle, pMPC(m)-BMA(n) may find application as a promising reagent to make a good formulation with a hydrophobic drug.     

Block copolymer micelles with pendant bifunctional chelator for platinum drugs: effect of spacer length on the viability of tumor cells

Three monomers with 1,3-dicarboxylate functional groups but varying spacer lengths were synthesized via carbon Michael addition using malonate esters and ethylene- (MAETC), butylene- (MABTC), and hexylene (MAHTC) glycol dimethacrylate, respectively. Poly[oligo-(ethylene glycol) methylether methacrylate] (POEGMEMA) was prepared in the presence of a RAFT (reversible addition-fragmentation chain transfer) agent, followed by chain extension with the prepared monomers to generate three different block copolymers (BP-E80, BP-B82, and BP-H79) with similar numbers of repeating units, but various spacer lengths as distinguishing features. Conjugation with platinum drugs created macromolecular platinum drugs resembling carboplatin. The amphiphilic natures of these Pt-containing block copolymers led to the formation micelles in solution. The rate of drug release of all micelles was similar, but a noticeable difference was the increasing stability of the micelle against dissociation with increasing spacer length. The platinum conjugated polymer showed high activity against A549, OVCAR3, and SKOV3 cancer cell lines exceeding the activity of carboplatin, but only the micelle based on the longest spacer had IC(50) values as low as cisplatin. Cellular uptake studies identified a better micelle uptake with increasing micelle stability as a possible reason for lower IC(50) values. The clonogenic assay revealed that micelles loaded with platinum drugs, in contrast to low molecular weight carboplatin, have not only better activity within the frame of a 72 h cell viability study, but also display a longer lasting effect by preventing the colony formation A549 for more than 10 days.     

Ketal cross-linked poly(ethylene glycol)-poly(amino acid)s copolymer micelles for efficient intracellular delivery of doxorubicin

A biocompatible, robust polymer micelle bearing pH-hydrolyzable shell cross-links was developed for efficient intracellular delivery of doxorubicin (DOX). The rationally designed triblock copolymer of poly(ethylene glycol)-poly(L-aspartic acid)-poly(L-phenylalanine) (PEG-PAsp-PPhe) self-assembled to form polymer micelles with three distinct domains of the PEG outer corona, the PAsp middle shell, and the PPhe inner core. Shell cross-linking was performed by the reaction of ketal-containing cross-linkers with Asp moieties in the middle shells. The shell cross-linking did not change the micelle size and the spherical morphology. Fluorescence quenching experiments confirmed the formation of shell cross-linked diffusion barrier, as judged by the reduced Stern-Volmer quenching constant (K(SV)). Dynamic light scattering and fluorescence spectroscopy experiments showed that shell cross-linking improved the micellar physical stability even in the presence of micelle disrupting surfactants, sodium dodecyl sulfate (SDS). The hydrolysis kinetics study showed that the hydrolysis half-life (t(1/2)) of ketal cross-links was estimated to be 52 h at pH 7.4, whereas 0.7 h at pH 5.0, indicating the 74-fold faster hydrolysis at endosomal pH. Ketal cross-linked micelles showed the rapid DOX release at endosomal pH, compared to physiological pH. Confocal laser scanning microscopy (CLSM) showed that ketal cross-linked micelles were taken up by the MCF-7 breast cancer cells via endocytosis and transferred into endosomes to hydrolyze the cross-links by lowered pH and finally facilitate the DOX release to inhibit proliferation of cancer cells. This ketal cross-linked polymer micelle is promising for enhanced intracellular delivery efficiency of many hydrophobic anticancer drugs.