Insight into the catalysis of hydrolysis of four newly synthesized substrates by papain: a proton inventory study

We synthesized the following four new peptide substrates, Suc-Phe-Leu-pNA, Suc-Phe-Leu-NMec, Suc-Phe-Leu-ONPh, and Pht-Phe-Leu-pNA, and we applied the proton inventory method to their hydrolysis by papain. Useful relationships between the rate constants of the catalytic reaction have been established and contributed to the elucidation of the hydrolytic mechanism of papain. For all amide substrates, the parameter K(S) and the rate constants k(1), k(-)(1), and k(2) were estimated. Moreover, it was found that k(cat)/K(m) = k(1) for all four substrates, while two exchangeable hydrogenic sites, one in the ground state and another in the transition state, generate an inverse isotope effect during the reaction governed by this parameter. The proton inventories of both k(2) and k(3) are essentially linear, whatever the acyl moiety and/or the leaving group of the substrate. The proton inventories of K(S) are also essentially linear for all amide substrates, while the observed large isotope effect of about 3 to 9 originates from a single hydrogenic site in the product state. This latter, in agreement to both the small transition state fractionation factors found for k(cat)/K(m) (or k(1)) and the unit ground-state fractionation factors found for k(2), argues for the formation of a tetrahedral adduct during the reaction governed by the k(1) parameter. Furthermore, papain acts as a one-proton catalyst during acylation or deacylation, both of which proceed through similar concerted reaction pathways, where a nucleophilic attack is accompanied by the movement of one proton.     

Kinetics of the hydrolysis of N-benzoyl-l-serine methyl ester catalysed by bromelain and by papain. Analysis of modifier mechanisms by lattice nomography, computational methods of parameter evaluation for substrate-activated catalyses and consequences of postulated non-productive binding in bromelain- and papain-catalysed hydrolyses

1. N-Benzoyl-l-serine methyl ester was synthesized and evaluated as a substrate for bromelain (EC 3.4.22.4) and for papain (EC 3.4.22.2). 2. For the bromelain-catalysed hydrolysis at pH7.0, plots of [S(0)]/v(i) (initial substrate concn./initial velocity) versus [S(0)] are markedly curved, concave downwards. 3. Analysis by lattice nomography of a modifier kinetic mechanism in which the modifier is substrate reveals that concave-down [S(0)]/v(i) versus [S(0)] plots can arise when the ratio of the rate constants that characterize the breakdown of the binary (ES) and ternary (SES) complexes is either less than or greater than 1. In the latter case, there are severe restrictions on the values that may be taken by the ratio of the dissociation constants of the productive and non-productive binary complexes. 4. Concave-down [S(0)]/v(i) versus [S(0)] plots cannot arise from compulsory substrate activation. 5. Computational methods, based on function minimization, for determination of the apparent parameters that characterize a non-compulsory substrate-activated catalysis are described. 6. In an attempt to interpret the catalysis by bromelain of the hydrolysis of N-benzoyl-l-serine methyl ester in terms of substrate activation, the general substrate-activation model was simplified to one in which only one binary ES complex (that which gives rise directly to products) can form. 7. In terms of this model, the bromelain-catalysed hydrolysis of N-benzoyl-l-serine methyl ester at pH7.0, I=0.1 and 25 degrees C is characterized by K(m) (1) (the dissociation constant of ES)=1.22+/-0.73mm, k (the rate constant for the breakdown of ES to E+products, P)=1.57x10(-2)+/-0.32x10(-2)s(-1), K(a) (2) (the dissociation constant that characterizes the breakdown of SES to ES and S)=0.38+/-0.06m, and k' (the rate constant for the breakdown of SES to E+P+S)=0.45+/-0.04s(-1). 8. These parameters are compared with those in the literature that characterize the bromelain-catalysed hydrolysis of alpha-N-benzoyl-l-arginine ethyl ester and of alpha-N-benzoyl-l-arginine amide; K(m) (1) and k for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine amide hydrolysis and K(as) and k' for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine ester hydrolysis. 9. A previous interpretation of the inter-relationships of the values of k(cat.) and K(m) for the bromelain-catalysed hydrolysis of the arginine ester and amide substrates is discussed critically and an alternative interpretation involving substantial non-productive binding of the arginine amide substrate to bromelain is suggested. 10. The parameters for the bromelain-catalysed hydrolysis of the serine ester substrate are tentatively interpreted in terms of non-productive binding in the binary complex and a decrease of this type of binding by ternary complex-formation. 11. The Michaelis parameters for the papain-catalysed hydrolysis of the serine ester substrate (K(m)=52+/-4mm, k(cat.)=2.80+/-0.1s(-1) at pH7.0, I=0.1, 25.0 degrees C) are similar to those for the papain-catalysed hydrolysis of methyl hippurate. 12. Urea and guanidine hydrochloride at concentrations of 1m have only small effects on the kinetic parameters for the hydrolysis of the serine ester substrate catalysed by bromelain and by papain.     

Proton inventories constitute reliable tools in investigating enzymatic mechanisms: application on a novel thermo-stable extracellular protease from a halo-alkalophilic Bacillus sp

A novel protease designated protease-A-17N-1, was purified from the halo-alkalophilic Bacillus sp. 17N-1, and found active in media containing dithiothreitol and EDTAK(2). This enzyme maintained significant activity from pH 6.00 to 9.00, showed optimum k(cat)/K(m) value at pH 7.50 and 33 degrees C. It was observed that only specific inhibitors of cysteine proteinases inhibited its activity. The pH-(k(cat)/K(m)) profile of protease-A-17N-1 was described by three pK(a)s in the acid limb, and one in the alkaline limb. Both are more likely due t3o the protonic dissociation of an acidic residue, and the development and subsequent deprotonation of an ion-pair, respectively, in its catalytic site, characteristic for cysteine proteinases. Moreover, both the obtained estimates of rate constant k(1) and the ratio k(2)/k(-1) at 25 degrees C, from the temperature-(k(cat)/K(m)) profile of protease-A-17N-1, were found similar to those estimated from the proton inventories of the same parameter, verifying the reliability of the latter methodology. Besides, the bowed-downward proton inventories of k(cat)/K(m), as well as the large inverse SIE observed for this parameter, in combination with its dependence versus temperature, were showed unambiguously that k(cat)/K(m) = k(1). Such results suggest that the novel enzyme is more likely to be a cysteine proteinase functioning via a general acid-base mechanism.     

Staphylococcus aureus sortase transpeptidase SrtA: insight into the kinetic mechanism and evidence for a reverse protonation catalytic mechanism

The Staphylococcus aureus transpeptidase SrtA catalyzes the covalent attachment of LPXTG-containing virulence and colonization-associated proteins to cell-wall peptidoglycan in Gram-positive bacteria. Recent structural characterizations of staphylococcal SrtA, and related transpeptidases SrtB from S. aureus and Bacillus anthracis, provide many details regarding the active site environment, yet raise questions with regard to the nature of catalysis and active site cysteine thiol activation. Here we re-evaluate the kinetic mechanism of SrtA and shed light on aspects of its catalytic mechanism. Using steady-state, pre-steady-state, bisubstrate kinetic studies, and high-resolution electrospray mass spectrometry, revised steady-state kinetic parameters and a ping-pong hydrolytic shunt kinetic mechanism were determined for recombinant SrtA. The pH dependencies of kinetic parameters k(cat)/K(m) and k(cat) for the substrate Abz-LPETG-Dap(Dnp)-NH(2) were bell-shaped with pK(a) values of 6.3 +/- 0.2 and 9.4 +/- 0.2 for k(cat) and 6.2 +/- 0.2 and 9.4 +/- 0.2 for k(cat)/K(m). Solvent isotope effect (SIE) measurements revealed inverse behavior, with a (D)2(O)k(cat) of 0.89 +/- 0.01 and a (D)2(O)(k(cat)/K(m)) of 0.57 +/- 0.03 reflecting an equilibrium SIE. In addition, SIE measurements strongly implicated Cys184 participation in the isotope-sensitive rate-determining chemical step when considered in conjunction with an inverse linear proton inventory for k(cat). Last, the pH dependence of SrtA inactivation by iodoacetamide revealed a single ionization for inactivation. These studies collectively provide compelling evidence for a reverse protonation mechanism where a small fraction (ca. 0.06%) of SrtA is competent for catalysis at physiological pH, yet is highly active with an estimated k(cat)/K(m) of >10(5) M(-)(1) s(-)(1).     

Cloning and characterization of histamine dehydrogenase from Nocardioides simplex

Histamine dehydrogenase (NSHADH) can be isolated from cultures of Nocardioides simplex grown with histamine as the sole nitrogen source. A previous report suggested that NSHADH might contain the quinone cofactor tryptophan tryptophyl quinone (TTQ). Here, the hdh gene encoding NSHADH is cloned from the genomic DNA of N. simplex, and the isolated enzyme is subjected to a full spectroscopic characterization. Protein sequence alignment shows NSHADH to be related to trimethylamine dehydrogenase (TMADH: EC 1.5.99.7), where the latter contains a bacterial ferredoxin-type [4Fe-4S] cluster and 6-S-cysteinyl FMN cofactor. NSHADH has no sequence similarity to any TTQ containing amine dehydrogenases. NSHADH contains 3.6+/-0.3 mol Fe and 3.7+/-0.2 mol acid labile S per subunit. A comparison of the UV/vis spectra of NSHADH and TMADH shows significant similarity. The EPR spectrum of histamine reduced NSHADH also supports the presence of the flavin and [4Fe-4S] cofactors. Importantly, we show that NSHADH has a narrow substrate specificity, oxidizing only histamine (K(m)=31+/-11 microM, k(cat)/K(m)=2.1 (+/-0.4)x10(5)M(-1)s(-1)), agmatine (K(m)=37+/-6 microM, k(cat)/K(m)=6.0 (+/-0.6)x10(4)M(-1)s(-1)), and putrescine (K(m)=1280+/-240 microM, k(cat)/K(m)=1500+/-200 M(-1)s(-1)). A kinetic characterization of the oxidative deamination of histamine by NSHADH is presented that includes the pH dependence of k(cat)/K(m) (histamine) and the measurement of a substrate deuterium isotope effect, (D)(k(cat)/K(m) (histamine))=7.0+/-1.8 at pH 8.5. k(cat) is also pH dependent and has a reduced substrate deuterium isotope of (D)(k(cat))=1.3+/-0.2.     

Synthesis and hydrolysis by cysteine and serine proteases of short internally quenched fluorogenic peptides

We developed sensitive substrates for cysteine proteases and specific substrates for serine proteases based on short internally quenched fluorescent peptides, Abz-F-R-X-EDDnp, where Abz (ortho-aminobenzoic acid) is the fluorescent donor, EDDnp [N-(ethylenediamine)-2,4-dinitrophenyl amide] is the fluorescent quencher, and X are natural amino acids. This series of peptides is compared to the commercially available Z-F-R-MCA, where Abz and X replace carbobenzoxy (Z) and methyl-7-aminocoumarin amide (MCA), respectively; and EDDnp can be considered a P(2)' residue. Whereas MCA is the fluorescent probe and cannot be modified, in the series Abz-F-R-X-EDDnp the amino acids X give the choice of matching the specificity of the S(1)' enzyme subsite, increasing the substrate specificity for a particular protease. All Abz-F-R-X-EDDnp synthesized peptides (for X = Phe, Leu, Ile, Ala, Pro, Gln, Ser, Lys, and Arg) were assayed with papain, human cathepsin L and B, trypsin, human plasma, and tissue kallikrein. Abz-F-R-L-EDDnp was the best substrate for papain and Abz-F-R-R-EDDnp or Abz-F-R-A-EDDnp was the more susceptible to cathepsin L. Abz-F-R-L-EDDnp was able to detect papain in the range of 1 to 15 pM. Human plasma kallikrein hydrolyzed Abz-F-R-R-EDDnp with significant efficiency (k(cat)/K(m) = 1833 mM(-1) s(-1)) and tissue kallikrein was very selective, hydrolyzing only the peptides Abz-F-R-A-EDDnp (k(cat)/K(m) = 2852 mM(-1) s(-1)) and Abz-F-R-S-EDDnp (k(cat)/K(m) = 4643 mM(-1) s(-1)). All Abz-F-R-X-EDDnp peptides were resistant to hydrolysis by thrombin and activated factor X.     

Inhibition and pH dependence of phosphite dehydrogenase

Phosphite dehydrogenase (PTDH) catalyzes the NAD-dependent oxidation of phosphite to phosphate, a reaction that is 15 kcal/mol exergonic. The enzyme belongs to the family of D-hydroxy acid dehydrogenases. Five other family members that were analyzed do not catalyze the oxidation of phosphite, ruling out the possibility that this is a ubiquitous activity of these proteins. PTDH does not accept any alternative substrates such as thiophosphite, hydrated aldehydes, and methylphosphinate, and potential small nucleophiles such as hydroxylamine, fluoride, methanol, and trifluoromethanol do not compete with water in the displacement of the hydride from phosphite. The pH dependence of k(cat)/K(m,phosphite) is bell-shaped with a pK(a) of 6.8 for the acidic limb and a pK(a) of 7.8 for the basic limb. The pK(a) of 6.8 is assigned to the second deprotonation of phosphite. However, whether the dianionic form of phosphite is the true substrate is not clear since a reverse protonation mechanism is also consistent with the available data. Unlike k(cat)/K(m,phosphite), k(cat) and k(cat)/K(m,NAD) are pH-independent. Sulfite is a strong inhibitor of PTDH that is competitive with respect to phosphite and uncompetitive with respect to NAD(+). Incubation of the enzyme with NAD(+) and low concentrations of sulfite results in a covalent adduct between NAD(+) and sulfite in the active site of the enzyme that binds very tightly. Fluorescent titration studies provided the apparent dissociation constants for NAD(+), NADH, sulfite, and the sulfite-NAD(+) adduct. Substrate isotope effect studies with deuterium-labeled phosphite resulted in small normal isotope effects (1.4-2.1) on both k(cat) and k(cat)/K(m,phosphite) at pH 7.25 and 8.0. Solvent isotope effects (SIEs) on k(cat) are similar in size; however, the SIE of k(cat)/K(m,phosphite) at pH 7.25 is significantly larger (4.4), whereas at pH 8.0, it is the inverse (0.6). The pH-rate profile of k(cat)/K(m,phosphite), which predicts that the observed SIEs will have a significant thermodynamic origin, can account for these effects.     

Solvent isotope effects on alpha-glucosidase

The solvent kinetic isotope effects (SKIE) on the yeast alpha-glucosidase-catalyzed hydrolysis of p-nitrophenyl and methyl-d-glucopyranoside were measured at 25 degrees C. With p-nitrophenyl-D-glucopyranoside (pNPG), the dependence of k(cat)/K(m) on pH (pD) revealed an unusually large (for glycohydrolases) solvent isotope effect on the pL-independent second-order rate constant, (DOD)(k(cat)/K(m)), of 1.9 (+/-0.3). The two pK(a)s characterizing the pH profile were increased in D(2)O. The shift in pK(a2) of 0.6 units is typical of acids of comparable acidity (pK(a)=6.5), but the increase in pK(a1) (=5.7) of 0.1 unit in going from H(2)O to D(2)O is unusually small. The initial velocities show substrate inhibition (K(is)/K(m) approximately 200) with a small solvent isotope effect on the inhibition constant [(DOD)K(is)=1.1 (+/-0.2)]. The solvent equilibrium isotope effects on the K(is) for the competitive inhibitors D-glucose and alpha-methyl D-glucoside are somewhat higher [(DOD)K(i)=1.5 (+/-0.1)]. Methyl glucoside is much less reactive than pNPG, with k(cat) 230 times lower and k(cat)/K(m) 5 x 10(4) times lower. The solvent isotope effect on k(cat) for this substrate [=1.11 (+/-0. 02)] is lower than that for pNPG [=1.67 (+/-0.07)], consistent with more extensive proton transfer in the transition state for the deglucosylation step than for the glucosylation step.     

Comparison of the substrate conformations in the active sites of papain, chymopapain, ficin and bromelain by resonance Raman spectroscopy

The resonance Raman spectra of several enzyme-substrate intermediates of papain, chymopapain, ficin and bromelain are reported. The intermediates are dithioacyl enzymes formed during the catalyzed hydrolysis of N-acylglycine thionoester substrates. Interpretation of the resonance Raman spectra allows us to compare, for the first time, the substrate geometries in a series of functioning intermediates from different enzymes. The substrates assume essentially identical conformations for papain, chymopapain and ficin and a similar, but not identical, conformation in the active site of bromelain. Each dithioacyl enzyme population appears to be made up of a single homogeneous conformational state. This state has been characterised in earlier studies of dithioacyl papains. It is designated as conformer B and is characterized by an attractive contact between the substrate's glycinic N atom and the active site cysteine S atom. It is now apparent that conformer B is of general significance in the mechanism of cysteine proteases.     

Catalytic properties of the PepQ prolidase from Escherichia coli

The PepQ prolidase from Escherichia coli catalyzes the hydrolysis of dipeptide substrates with a proline residue at the C-terminus. The pepQ gene has been cloned, overexpressed, and the enzyme purified to homogeneity. The k(cat) and k(cat)/K(m) values for the hydrolysis of Met-Pro are 109 s(-1) and 8.4 x 10(5)M(-1)s(-1), respectively. The enzyme also catalyzes the stereoselective hydrolysis of organophosphate triesters and organophosphonate diesters. A series of 16 organophosphate triesters with a p-nitrophenyl leaving group were assessed as substrates for PepQ. The S(P)-enantiomer of methyl phenyl p-nitrophenyl phosphate was hydrolyzed with a k(cat) of 36 min(-1) and a k(cat)/K(m) of 710 M(-1)s(-1). The corresponding R(P)-enantiomer was hydrolyzed more slowly with a k(cat) of 0.4 min(-1) and a k(cat)/K(m) of 11 M(-1)s(-1). The PepQ prolidase can be utilized for the kinetic resolution of racemic phosphate esters. The PepQ prolidase was shown to hydrolyze the p-nitrophenyl analogs of the nerve agents GB (sarin), GD (soman), GF, and VX.     

Two inhibitor molecules bound in the active site of Pseudomonas sedolisin: a model for the bi-product complex following cleavage of a peptide substrate

High-resolution crystallographic analysis of a complex of the serine-carboxyl proteinase sedolisin with pseudo-iodotyrostatin revealed two molecules of this inhibitor bound in the active site of the enzyme, marking subsites from S3 to S3('). The mode of binding represents two products of the proteolytic reaction. Substrate specificity of sedolisin was investigated using peptide libraries and a new peptide substrate for sedolisin, MCA-Lys-Pro-Pro-Leu-Glu#Tyr-Arg-Leu-Gly-Lys(DNP)-Gly, was synthesized based on the results of the enzymatic and crystallographic studies and was shown to be efficiently cleaved by the enzyme. The kinetic parameters for the substrate, measured by the increase in fluorescence upon relief of quenching, were: k(cat)=73+/-5 s(-1), K(m)=0.12+/-0.011 microM, and k(cat)/K(m)=608+/-85 s(-1)microM(-1).     

Kinetic investigations of the rate-limiting step in human 12- and 15-lipoxygenase

Mammalian lipoxygenases have been implicated in several inflammatory disorders; however, the details of the kinetic mechanism are still not well understood. In this paper, human platelet 12-lipoxygenase (12-hLO) and human reticulocyte 15-lipoxygenase-1 (15-hLO) were tested with arachidonic acid (AA) and linoleic acid (LA), respectively, under a variety of changing experimental conditions, such as temperature, dissolved oxygen concentration, and viscosity. The data that are presented show that 12-hLO and 15-hLO have slower rates of product release (k(cat)) than soybean lipoxygenase-1 (sLO-1), but similar or better rates of substrate capture for the fatty acid (k(cat)/K(M)) or molecular oxygen [k(cat)/K(M(O)2)]. The primary, kinetic isotope effect (KIE) for 15-hLO with LA was determined to be temperature-independent and large ((D)k(cat) = 40 +/- 8), over the range of 10-35 degrees C, indicating that C-H bond cleavage is the sole rate-limiting step and proceeds through a tunneling mechanism. The (D)k(cat)/K(M) for 15-hLO, however, was temperature-dependent, consistent with our previous results [Lewis, E. R., Johansen, E., and Holman, T. R. (1999) J. Am. Chem. Soc. 121, 1395-1396], indicating multiple rate-limiting steps. This was confirmed by a temperature-dependent, k(cat)/K(M) solvent isotope effect (SIE), which indicated a hydrogen bond rearrangement step at low temperatures, similar to that of sLO-1 [Glickman, M. H., and Klinman, J. P. (1995) Biochemistry 34, 14077-14092]. The KIE could not be determined for 12-hLO due to its inability to efficiently catalyze LA, but the k(cat)/K(M) SIE was temperature-independent, indicating distinct rate-limiting steps from both 15-hLO and sLO-1.     

The inhibition of metallo-beta-lactamase by thioxo-cephalosporin derivatives

The 8-thioxocephalosporins are poor substrates for the B. cereus metallo beta-lactamase (k(cat)/K(m)=61.4M(-1) s(-1)) and act as weak competitive inhibitors (K(i) approximately 700 microM). The hydrolysis product of thioxocephalosporin, a thioacid, also inhibits the enzyme competitively with a K(i)=96 microM, whereas the cyclic thioxo-piperazinedione, formed by intramolecular aminolysis of thioxocephalexin has a K(i) of 29 microM.     

Development of intramolecularly quenched fluorescent peptides as substrates of angiotensin-converting enzyme 2

Angiotensin-converting enzyme 2 (ACE2 or ACEH) is a novel angiotensin-converting enzyme-related carboxypeptidase that cleaves a single amino acid from angiotensin I, des-Arg bradykinin, and many other bioactive peptides. Using des-Arg bradykinin as a template, we designed a series of intramolecularly quenched fluorogenic peptide substrates for ACE2. The general structure of the substrates was F-X-Q, in which F was the fluorescent group, Abz, Q was the quenching group (either Phe(NO(2)) or Tyr(NO(2))), and X was the intervening peptide. These substrates were selectively cleaved by recombinant human ACE2, as shown by MS and HPLC. Quenching efficiency increased as the peptide sequence was shortened from 8 to 3 aa, and also when Tyr(NO(2)) was used as a quenching group instead of Phe(NO(2)). Two of the optimized substrates, TBC5180 and TBC5182, produced a signal:noise ratio of better than 20 when hydrolyzed by ACE2. Kinetic measurements with ACE2 were as follows: TBC5180, K(m)=58 microM and k(cat)/K(m)=1.3x10(5)M(-1)s(-1); TBC5182, K(m)=23 microM and k(cat)/K(m)=3.5 x 10(4)M(-1)s(-1). Thus, based on hydrolysis rate, TBC5180 was a better substrate than TBC5182. However, TBC5180 was also hydrolyzed by ACE, whereas TBC5182 was not cleaved, suggesting that TBC5182 was a selective for ACE2. We conclude that these two peptides can be used as fluorescent substrates for high-throughput screening for selective inhibitors of ACE2 enzyme.     

Papain kinetics in the presence of a water-miscible organic solvent

The effects of various concentrations of a water-miscible organic solvent [a 7:3 (v/v) mixture of N, N dimethylformamide and dimethylsulfoxide] on the kinetics of papain have been investigated. The parameters k(cat) and K(m) for the amidase and esterase activity of papain using N-alpha-benzoyl-DL-arginine-p-nitroanilide (BAPNA) and N-alpha-benzoyl-L-arginine ethyl ester (BAEE) as substrates were determined. For both types of activity, k(cat) initially increased (up to about 15% solvent), and then decreased with increasing concentrations of organic solvent. In contrast, K(m) increased sharply with the organic solvent concentration. Active site titration at 0 and 50% solvent indicated no change in the amount of active enzyme. Fluorometric measurements of the emission spectrum of papain did not indicate any major conformational changes with increasing concentrations of organic solvent.     

A fluorimetric method for the determination of pepsin activity

An intramolecularly quenched fluorogenic peptide containing o-aminobenzoyl (Abz) and ethylenediamine 2,4-dinitrophenyl (Eddnp) groups at amino- and carboxyl-terminal amino acid residues, Abz-Lys-Pro-Ile-Glu-Phe-Phe-Arg-Leu-Eddnp, was hydrolyzed by purified human pepsin, gastricsin, and gastric juice uniquely at the Phe-Phe bond. Kinetic parameters determined for purified pepsin were K(m)=0.68+/-0.11 microM; k(cat)=6.3+/-0.16s(-1); k(cat)/K(m)=9.26s(-1) microM(-1); Gastricsin showed K(m)=2.69+/-0.18 microM; k(cat)=0.03+/-0.005s(-1); k(cat)/K(m)=0.011s(-1) microM(-1). Gastric juice (21 samples) from subjects without gastric disorders at endoscopy examination showed activities varying from 0.0008 to 9.72 micromolml(-1)min(-1). Pepstatin A inhibition of gastric juice enzymatic activity was complete at 3.4x10(-5)M (final concentration) inhibitor. In the proposed method the presence of a unique scissile bond in the synthetic substrate provides a direct ratio between enzymatic activity and amount of substrate hydrolyzed, and a unique step reaction facilitates the use of this assay for the determination of the activity of aspartic proteinases in biological fluids and during enzyme purification procedures.     

pH dependence and solvent deuterium oxide kinetic isotope effects on Bacillus cereus beta-lactamase I catalyzed reactions

The solvent kinetic isotope effects (SKIE's) on k(cat) (D(V)) and on k(cat/Km[D(V/K)] were determined for the Bacillus cereus beta-lactamase I catalyzed hydrolysis of five substrates that have values of k(cat)/K(m) varying over the range (0.014-46.3) X 10(6)M(-1) s(-1) and of k(cat) between 0.5 and 2019 s(-1). The variation of D(V/K) was only from 1.06 to 1.25 among these compounds and that in D(V) was from 1.50 to 2.16. These results require that Dk(1), the SKIE on the enzyme-substrate association rate constant, and D(k-1/k2), that on the partition ratio of the ES complex, both be near 1. The larger SKIE observed on D(V) requires that an exchangeable proton be in flight for either or both the acylation and the deacylation reaction. The pH dependence of the values k(cat)/K(m) for three substrates shows identical pK(a)s of 5.5. and 8.4. This identity combined with the fact that only one of these three substrates is kinetically "sticky" proves that the substrates can combine productively with only one protonic form of the enzyme. There is considerable substrate variation in the pK(a) values of k(cat) observed vs. pH profiles; the inflection points for all substrates studied are at pH values more extreme than are observed in the pH profiles for k(cat)/K(m).     

Substrate conformation modulates aggrecanase (ADAMTS-4) affinity and sequence specificity. Suggestion of a common topological specificity for functionally diverse proteases

Protease-substrate interactions are governed by a variety of structural features. Although the substrate sequence specificities of numerous proteases have been established, "topological specificities," whereby proteases may be classified based on recognition of distinct three-dimensional structural motifs, have not. The aggrecanase members of the ADAMTS (a disintegrin and metalloproteinase with thrombospondin motifs) family cleave a variety of proteins but do not seem to possess distinct sequence specificities. In the present study, the topological substrate specificity of ADAMTS-4 (aggrecanase-1) was examined using triple-helical or single-stranded poly(Pro) II helical peptides. Substrate topology modulated the affinity and sequence specificity of ADAMTS-4 with K(m) values indicating a preference for triple-helical structure. In turn, non-catalytic ADAMTS-4 domains were critical for hydrolysis of triple-helical and poly(Pro) II helical substrates. Comparison of ADAMTS-4 with MMP-1 (collagenase 1), MMP-13 (collagenase 3), trypsin, and thermolysin using triple-helical peptide (THP) and single-stranded peptide (SSP) substrates demonstrated that all five proteases possessed efficient "triple-helical peptidase" activity and fell into one of two categories: (k(cat)/K(m))(SSP) > (k(cat)/K(m))(THP) (thermolysin, trypsin, and MMP-13) or (k(cat)/K(m))(THP) > or = (k(cat)/K(m))(SSP) and (K(m))(SSP) > (K(m))(THP) (MMP-1 and ADAMTS-4). Overall these results suggest that topological specificity may be a guiding principle for protease behavior and can be utilized to design specific substrates and inhibitors. The triple-helical and single-stranded poly(Pro) II helical peptides represent the first synthetic substrates successfully designed for aggrecanases.     

S1 subsite specificity of a recombinant cysteine proteinase, CPB, of Leishmania mexicana compared with cruzain, human cathepsin L and papain using substrates containing non-natural basic amino acids.

We have explored the substrate specificity of a recombinant cysteine proteinase of Leishmania mexicana (CPB2.8 Delta CTE) in order to obtain data that will enable us to design specific inhibitors of the enzyme. Previously we have shown that the enzyme has high activity towards substrates with a basic group at the P1 position [Hilaire, P.M.S., Alves, L.C., Sanderson, S.J., Mottram, J.C., Juliano, M.A., Juliano, L., Coombs, G.H. & Meldal M. (2000) Chem. Biochem. 1, 115--122], but we have also observed high affinity for peptides with hydrophobic residues at this position. In order to have substrates containing both features, we synthesized one series of internally quenched fluorogenic peptides derived from the sequence ortho-amino-benzoyl-FRSRQ-N-[2,4-dinitrophenyl]-ethylenediamine, and substituted the Arg at the P1 position with the following non-natural basic amino acids: 4-aminomethyl-phenylalanine (Amf), 4-guanidine-phenylalanine (Gnf), 4-aminomethyl-N-isopropyl-phenylalanine (Iaf), 3-pyridyl-alanine (Pya), 4-piperidinyl-alanine (Ppa), 4-aminomethyl-cyclohexyl-alanine (Ama), and 4-aminocyclohexyl-alanine (Aca). For comparison, the series derived from ortho-amino-benzoyl-FRSRQ-N-[2,4-dinitrophenyl]-ethylenediamine was also assayed with cruzain (the major cysteine proteinase of Trypanosoma cruzi), human cathepsin L and papain. The peptides ortho-amino-benzoyl-FAmfSRQ-N-[2,4-dinitrophenyl]-ethylenediamine (k(cat)/K(m) = 12,000 mM(-1) x s(-1)) and ortho-amino-benzoyl-FIafSRQ-N-[2,4-dinitrophenyl]-ethylenediamine (k(cat)/K(m) = 27,000 mM(-1) x s(-1)) were the best substrates for CPB2.8 Delta CTE. In contrast, ortho-amino-benzoyl-FAmaSRQ-N-[2,4-dinitrophenyl]-ethylenediamine and ortho-amino-benzoyl-FAcaSRQ-N-[2,4-dinitrophenyl]-ethylenediamine were very resistant and inhibited this enzyme with K(i) values of 23 nM and 30 nM, respectively. Cruzain hydrolyzed quite well the substrates in this series with Amf, Ppa and Aca, whereas the peptide with Ama was resistant and inhibited cruzain with a K(i) of 40 nM. Human cathepsin L presented an activity on these peptides very similar to that of CPB2.8 Delta CTE and papain hydrolyzed all the peptides with high efficiency. In conclusion, we have demonstrated that CPB2.8 Delta CTE has more restricted specificity at the S1 subsite and it seems possible to design efficient inhibitors with amino acids such as Ama or Aca at the P(1) position.     

Re-engineering cytochrome P450 2B11dH for enhanced metabolism of several substrates including the anti-cancer prodrugs cyclophosphamide and ifosfamide

Based on recent directed evolution of P450 2B1, six P450 2B11 mutants at three positions were created in an N-terminal modified construct termed P450 2B11dH and characterized for enzyme catalysis using five substrates. Mutant I209A demonstrated a 3.2-fold enhanced k(cat)/K(m) for 7-ethoxy-4-trifluoromethylcourmarin O-deethylation, largely due to a dramatic decrease in K(m) (0.72 microM vs. 18 microM). I209A also demonstrated enhanced selectivity for testosterone 16beta-hydroxylation over 16alpha-hydroxylation. In contrast, V183L showed a 4-fold increased k(cat) for 7-benzyloxyresorufin debenzylation and a 4.7-fold increased k(cat)/K(m) for testosterone 16alpha-hydroxylation. V183L also displayed a 1.7-fold higher k(cat)/K(m) than P450 2B11dH with the anti-cancer prodrugs cyclophosphamide and ifosfamide, resulting from a approximately 4-fold decrease in K(m). Introduction of the V183L mutation into full-length P450 2B11 did not enhance the k(cat)/K(m). Overall, the re-engineered P450 2B11dH enzymes exhibited enhanced catalytic efficiency with several substrates including the anti-cancer prodrugs.