Revisiting monomeric HIV-1 protease. Characterization and redesign for improved properties

Interactions between the C-terminal interface residues (96-99) of the mature HIV-1 protease were shown to be essential for dimerization, whereas the N-terminal residues () and Arg(87) contribute to dimer stability (Ishima, R., Ghirlando, R., Tozser, J., Gronenborn, A. M., Torchia, D. A., and Louis, J. M. (2001) J. Biol. Chem. 276, 49110-49116). Here we show that the intramonomer interaction between the side chains of Asp(29) and Arg(87) influences dimerization significantly more than the intermonomer interaction between Asp(29) and Arg(8'). Several mutants, including T26A, destablize the dimer, exhibit a monomer fold, and are prone to aggregation. To alleviate this undesirable property, we designed proteins in which the N- and C-terminal regions can be linked intramolecularly by disulfide bonds. In particular, cysteine residues were introduced at positions 2 and 97 or 98. A procedure for the efficient preparation of intrachain-linked polypeptides is presented, and it is demonstrated that the Q2C/L97C variant exhibits a native-like single subunit fold. It is anticipated that monomeric proteases of this kind will aid in the discovery of novel inhibitors aimed at binding to the monomer at the dimerization interface. This extends the target area of current inhibitors, all of which bind across the active site formed by both subunits in the active dimer.     

Mutational and structural studies aimed at characterizing the monomer of HIV-1 protease and its precursor

An experimental protocol for folding the mature human immunodeficiency virus-1 (HIV-1) protease is presented that facilitates NMR studies at a low protein concentration of approximately 20 micoM. Under these conditions, NMR spectra show that the mature protease lacking its terminal beta-sheet residues 1-4 and 96-99 (PR(5-95)) exhibits a stable monomer fold spanning the region 10-90 that is similar to that of the single subunit of the wild-type dimer and the dimer bearing a D25N mutation (PR(D25N)). Urea-induced unfolding monitored both by changes in (1)H-(15)N heteronuclear single quantum correlation spectra and by protein fluorescence indicates that although PR(5-95) monomer displays a transition profile similar to that of the PR(D25N) dimer (50% unfolded (U(50)) = approximately 1.9 M), extending the protease with 4 residues (SFNF) of its N-terminally flanking sequence in the Gag-Pol precursor ((SFNF)PR(D25N)) decreases the stability of the fold (U(50) = approximately 1.5 M). Assigned backbone chemical shifts were used to elucidate differences in the stability of the PR(T26A) (U(50) = 2.5 M) and (SFNF)PR(D25N) monomers and compared with PR(D25N/T26A) monomer. Discernible differences in the backbone chemical shifts were observed for N-terminal protease residues 3-6 of (SFNF)PR(D25N) that may relate to the increase in the equilibrium dissociation constant (K(d)) and the very low catalytic activity of the protease prior to its autoprocessing at its N terminus from the Gag-Pol precursor.     

Solution structure of the mature HIV-1 protease monomer: insight into the tertiary fold and stability of a precursor

We present the first solution structure of the HIV-1 protease monomer spanning the region Phe1-Ala95 (PR1-95). Except for the terminal regions (residues 1-10 and 91-95) that are disordered, the tertiary fold of the remainder of the protease is essentially identical to that of the individual subunit of the dimer. In the monomer, the side chains of buried residues stabilizing the active site interface in the dimer, such as Asp25, Asp29, and Arg87, are now exposed to solvent. The flap dynamics in the monomer are similar to that of the free protease dimer. We also show that the protease domain of an optimized precursor flanked by 56 amino acids of the N-terminal transframe region is predominantly monomeric, exhibiting a tertiary fold that is quite similar to that of PR1-95 structure. This explains the very low catalytic activity observed for the protease prior to its maturation at its N terminus as compared with the mature protease, which is an active stable dimer under identical conditions. Adding as few as 2 amino acids to the N terminus of the mature protease significantly increases its dissociation into monomers. Knowledge of the protease monomer structure and critical features of its dimerization may aid in the screening and design of compounds that target the protease prior to its maturation from the Gag-Pol precursor.     

Comparison of the crystal structures and intersubunit interactions of human immunodeficiency and Rous sarcoma virus proteases

The crystal structures of the proteases (PRs) encoded by the Rous sarcoma virus (RSV) and the human immunodeficiency virus (HIV) have been compared. The crystallographic monomer of HIV PR superimposes on the two crystallographically independent subunits of the RSV PR dimer with root mean square deviations of 1.45 and 1.55 A for 86 and 88 common C alpha atoms, respectively. There is a conserved structural core consisting of seven beta-strands forming two perpendicular layers, a helix, and the amino- and carboxyl-terminal beta-strands. PRs from related retroviruses fold into similar structures with surface turns of variable length between the beta-strands. Both HIV and RSV PR dimers have significant subunit-subunit interactions in three regions: the "firemen's grip" at the active site; the salt bridges involving Arg8, Asp29, and Arg87 of HIV PR; and the termini of the two subunits, which form a four-stranded antiparallel beta-sheet. The specific interactions of the termini differ in the two PRs. The carboxyl termini, residues 96-99 of HIV PR and residues 119-124 of RSV PR, contribute approximately 50% of the intersubunit ionic and hydrogen bond interactions and approximately 45% of the buried surface area involved in dimer formation. This information may be useful in the design of site-directed mutations or inhibitors of dimer formation.     

Synthetic "interface" peptides alter dimeric assembly of the HIV 1 and 2 proteases.

Retroviral proteases are obligate homodimers and play an essential role in the viral life cycle. Dissociation of dimers or prevention of their assembly may inactivate these enzymes and prevent viral maturation. A salient structural feature of these enzymes is an extended interface composed of interdigitating N- and C-terminal residues of both monomers, which form a four-stranded beta-sheet. Peptides mimicking one beta-strand (residues 95-99), or two beta-strands (residues 1-5 plus 95-99 or 95-99 plus 95-99) from the human immunodeficiency virus 1 (HIV1) interface were shown to inhibit the HIV1 and 2 proteases (PRs) with IC50's in the low micromolar range. These interface peptides show cognate enzyme preference and do not inhibit pepsin, renin, or the Rous sarcoma virus PR, indicating a degree of specificity for the HIV PRs. A tethered HIV1 PR dimer was not inhibited to the same extent as the wild-type enzymes by any of the interface peptides, suggesting that these peptides can only interact effectively with the interface of the two-subunit HIV PR. Measurements of relative dissociation constants by limit dilution of the enzyme show that the one-strand peptide causes a shift in the observed Kd for the HIV1 PR. Both one- and two-strand peptides alter the monomer/dimer equilibrium of both HIV1 and HIV2 PRs. This was shown by the reduced cross-linking of the HIV2 PR by disuccinimidyl suberate in the presence of the interface peptides. Refolding of the HIV1 and HIV2 PRs with the interface peptides shows that only the two-strand peptides prevent the assembly of active PR dimers. Although both one- and two-strand peptides seem to affect dimer dissociation, only the two-strand peptides appear to block assembly. The latter may prove to be more effective backbones for the design of inhibitors directed toward retroviral PR dimerization in vivo.     

Revealing the dimer dissociation and existence of a folded monomer of the mature HIV‐2 protease

Purification and in vitro protein‐folding schemes were developed to produce monodisperse samples of the mature wild‐type HIV‐2 protease (PR2), enabling a comprehensive set of biochemical and biophysical studies to assess the dissociation of the dimeric protease. An E37K substitution in PR2 significantly retards autoproteolytic cleavage during expression. Furthermore, it permits convenient measurement of the dimer dissociation of PR2_E37K (elevated K_d ～20 nM) by enzyme kinetics. Differential scanning calorimetry reveals a T_m of 60.5 for PR2 as compared with 65.7°C for HIV‐1 protease (PR1). Consistent with weaker binding of the clinical inhibitor darunavir (DRV) to PR2, the T_m of PR2 increases by 14.8°C in the presence of DRV as compared with 22.4°C for PR1. Dimer interface mutations, such as a T26A substitution in the active site (PR2_T26A) or a deletion of the C‐terminal residues 96–99 (PR2_1–95), drastically increase the K_d (>10⁵‐fold). PR2_T26A and PR2_1–95 consist predominantly of folded monomers, as determined by nuclear magnetic resonance (NMR) and size‐exclusion chromatography coupled with multiangle light scattering and refractive index measurements (SMR), whereas wild‐type PR2 and its active‐site mutant PR2_D25N are folded dimers. Addition of twofold excess active‐site inhibitor promotes dimerization of PR2_T26A but not of PR2_1–95, indicating that subunit interactions involving the C‐terminal residues are crucial for dimer formation. Use of SMR and NMR with PR2 facilitates probing for potential inhibitors that restrict protein folding and/or dimerization and, thus, may provide insights for the future design of inhibitors to circumvent drug resistance.     

Folding regulates autoprocessing of HIV-1 protease precursor

Autoprocessing of HIV-1 protease (PR) precursors is a crucial step in the generation of the mature protease. Very little is known regarding the molecular mechanism and regulation of this important process in the viral life cycle. In this context we report here the first and complete residue level investigations on the structural and folding characteristics of the 17-kDa precursor TFR-PR-C(nn) (161 residues) of HIV-1 protease. The precursor shows autoprocessing activity indicating that the solution has a certain population of the folded active dimer. Removal of the 5-residue extension, C(nn) at the C-terminal of PR enhanced the activity to some extent. However, NMR structural characterization of the precursor containing a mutation, D25N in the PR at pH 5.2 and 32 degrees C under different conditions of partial and complete denaturation by urea, indicate that the precursor has a high tendency to be unfolded. The major population in the ensemble displays some weak folding propensities in both the TFR and the PR regions, and many of these in the PR region are the non-native type. As both D25N mutant and wild-type PR are known to fold efficiently to the same native dimeric form, we infer that TFR cleavage enables removal of the non-native type of preferences in the PR domain to cause constructive folding of the protein. These results indicate that intrinsic structural and folding preferences in the precursor would have important regulatory roles in the autoprocessing reaction and generation of the mature enzyme.     

Structure and aggregation mechanism of beta(2)-microglobulin (83-99) peptides studied by molecular dynamics simulations

Many human neurodegenerative diseases are associated with amyloid fibril formation. The human 99-residue beta(2)-microglobulin (beta2m) is one of the most intensively studied amyloid-forming proteins. Recent studies show that the C-terminal fragments 72-99, 83-89, and 91-96 form by themselves amyloid fibrils in vitro and play a significant role in fibrillization of the full-length beta2m protein under acidic pH conditions. In this work, we have studied the equilibrium structures of the 17-residue fragment 83-99 in solution, and investigated its dimerization process by multiple molecular dynamics simulations. We find that an intertwined dimer, with the positions of the beta-strands consistent with the results for the monomer, is a possible structure for two beta2m(83-89) peptides. Based on our molecular-dynamics-generated dimeric structure, a protofibril model is proposed for the full-length beta2m protein.     

Three-dimensional structure of a monomeric form of a retroviral protease

The assembly of Mason-Pfizer monkey virus Gag polyproteins into immature capsids and their cleavage by the encoded protease are temporally and spatially separated processes, making the virus a particularly useful model for investigation of protease activation. Here we present a high resolution NMR structure of a fully folded monomer of a 12 kDa M-PMV protease (wt 12 PR) and of a Cys7Ala/Asp26Asn/Cys106Ala mutant (12 PR(D26N/C7A/C106A)). The overall structures of both wt 12 PR and 12 PR(D26N/C7A/C106A) follow the conservative structural motif of other retroviral proteases. The most prominent difference from the canonical fold of retroviral proteases is the absence of the interfacial beta-sheet, which leads to the loss of the principal force stabilizing the dimer of M-PMV PR. The monomer-dimer equilibrium can be shifted in favor of the dimer by adding a substrate or an inhibitor, partially compensating for the missing role of the beta-sheet. We also show that cysteines C7 and C106 play a crucial role in stabilizing the dimer and consequently increasing the proteolytic activity of M-PMV PR. This is consistent with the role of reversible oxidative modification of the cysteine residues in the regulation of the maturation of assembled M-PMV capsids in the cytoplasm.     

Solution structure of the catalytic domain of gammadelta resolvase. Implications for the mechanism of catalysis

The site-specific DNA recombinase, gammadelta resolvase, from Escherichia coli catalyzes recombination of res site-containing plasmid DNA to two catenated circular DNA products. The catalytic domain (residues 1-105), lacking a C-terminal dimerization interface, has been constructed and the NMR solution structure of the monomer determined. The RMSD of the NMR conformers for residues 2-92 excluding residues 37-45 and 64-73 is 0.41 A for backbone atoms and 0.88 A for all heavy atoms. The NMR solution structure of the monomeric catalytic domain (residues 1-105) was found to be formed by a four-stranded parallel beta-sheet surrounded by three helices. The catalytic domain (residues 1-105), deficient in the C-terminal dimerization domain, was monomeric at high salt concentration, but displayed unexpected dimerization at lower ionic strength. The unique solution dimerization interface at low ionic strength was mapped by NMR. With respect to previous crystal structures of the dimeric catalytic domain (residues 1-140), differences in the average conformation of active-site residues were found at loop 1 containing the catalytic S10 nucleophile, the beta1 strand containing R8, and at loop 3 containing D67, R68 and R71, which are required for catalysis. The active-site loops display high-frequency and conformational backbone dynamics and are less well defined than the secondary structures. In the solution structure, the D67 side-chain is proximal to the S10 side-chain making the D67 carboxylate group a candidate for activation of S10 through general base catalysis. Four conserved Arg residues can function in the activation of the phosphodiester for nucleophilic attack by the S10 hydroxyl group. A mechanism for covalent catalysis by this class of recombinases is proposed that may be related to dimer interface dissociation.     

Critical assessment of important regions in the subunit association and catalytic action of the severe acute respiratory syndrome coronavirus main protease

The severe acute respiratory syndrome (SARS) coronavirus (CoV) main protease represents an attractive target for the development of novel anti-SARS agents. The tertiary structure of the protease consists of two distinct folds. One is the N-terminal chymotrypsin-like fold that consists of two structural domains and constitutes the catalytic machinery; the other is the C-terminal helical domain, which has an unclear function and is not found in other RNA virus main proteases. To understand the functional roles of the two structural parts of the SARS-CoV main protease, we generated the full-length of this enzyme as well as several terminally truncated forms, different from each other only by the number of amino acid residues at the C- or N-terminal regions. The quaternary structure and K(d) value of the protease were analyzed by analytical ultracentrifugation. The results showed that the N-terminal 1-3 amino acid-truncated protease maintains 76% of enzyme activity and that the major form is a dimer, as in the wild type. However, the amino acids 1-4-truncated protease showed the major form to be a monomer and had little enzyme activity. As a result, the fourth amino acid seemed to have a powerful effect on the quaternary structure and activity of this protease. The last C-terminal helically truncated protease also exhibited a greater tendency to form monomer and showed little activity. We concluded that both the C- and the N-terminal regions influence the dimerization and enzyme activity of the SARS-CoV main protease.     

Dissection study on the severe acute respiratory syndrome 3C-like protease reveals the critical role of the extra domain in dimerization of the enzyme: defining the extra domain as a new target for design of highly specific protease inhibitors

The severe acute respiratory syndrome (SARS) 3C-like protease consists of two distinct folds, namely the N-terminal chymotrypsin fold containing the domains I and II hosting the complete catalytic machinery and the C-terminal extra helical domain III unique for the coronavirus 3CL proteases. Previously the functional role of this extra domain has been completely unknown, and it was believed that the coronavirus 3CL proteases share the same enzymatic mechanism with picornavirus 3C proteases, which contain the chymotrypsin fold but have no extra domain. To understand the functional role of the extra domain and to characterize the enzyme-substrate interactions by use of the dynamic light scattering, circular dichroism, and NMR spectroscopy, we 1) dissected the full-length SARS 3CL protease into two distinct folds and subsequently investigated their structural and dimerization properties and 2) studied the structural and binding interactions of three substrate peptides with the entire enzyme and its two dissected folds. The results lead to several findings; 1) although two dissected parts folded into the native-like structures, the chymotrypsin fold only had weak activity as compared with the entire enzyme, and 2) although the chymotrypsin fold remained a monomer within a wide range of protein concentrations, the extra domain existed as a stable dimer even at a very low concentration. This observation strongly indicates that the extra domain contributes to the dimerization of the SARS 3CL protease, thus, switching the enzyme from the inactive form (monomer) to the active form (dimer). This discovery not only separates the coronavirus 3CL protease from the picornavirus 3C protease in terms of the enzymatic mechanism but also defines the dimerization interface on the extra helical domain as a new target for design of the specific protease inhibitors. Furthermore, the determination of the preferred solution conformation of the substrate peptide S1 together with the NMR differential line-broadening and transferred nuclear Overhauser enhancement study allows us to pinpoint the bound structure of the S1 peptide.     

The folding and dimerization of HIV-1 protease: evidence for a stable monomer from simulations

HIV-1 protease (PR) is a major drug target in combating AIDS, as it plays a key role in maturation and replication of the virus. Six FDA-approved drugs are currently in clinical use, all designed to inhibit enzyme activity by blocking the active site, which exists only in the dimer. An alternative inhibition mode would be required to overcome the emergence of drug-resistance through the accumulation of mutations. This might involve inhibiting the formation of the dimer itself. Here, the folding of HIV-1 PR dimer is studied with several simulation models appropriate for folding mechanism studies. Simulations with an off-lattice Gō-model, which corresponds to a perfectly funneled energy landscape, indicate that the enzyme is formed by association of structured monomers. All-atom molecular dynamics simulations strongly support the stability of an isolated monomer. The conjunction of results from a model that focuses on the protein topology and a detailed all-atom force-field model suggests, in contradiction to some reported equilibrium denaturation experiments, that monomer folding and dimerization are decoupled. The simulation result is, however, in agreement with the recent NMR detection of folded monomers of HIV-1 PR mutants with a destabilized interface. Accordingly, the design of dimerization inhibitors should not focus only on the flexible N and C termini that constitute most of the dimer interface, but also on other structured regions of the monomer. In particular, the relatively high phi values for residues 23-35 and 79-87 in both the folding and binding transition states, together with their proximity to the interface, highlight them as good targets for inhibitor design.     

Without its N-finger, the main protease of severe acute respiratory syndrome coronavirus can form a novel dimer through its C-terminal domain

The main protease (M(pro)) of severe acute respiratory syndrome coronavirus (SARS-CoV) plays an essential role in the extensive proteolytic processing of the viral polyproteins (pp1a and pp1ab), and it is an important target for anti-SARS drug development. It was found that SARS-CoV M(pro) exists in solution as an equilibrium of both monomeric and dimeric forms, and the dimeric form is the enzymatically active form. However, the mechanism of SARS-CoV M(pro) dimerization, especially the roles of its N-terminal seven residues (N-finger) and its unique C-terminal domain in the dimerization, remain unclear. Here we report that the SARS-CoV M(pro) C-terminal domain alone (residues 187 to 306; M(pro)-C) is produced in Escherichia coli in both monomeric and dimeric forms, and no exchange could be observed between them at room temperature. The M(pro)-C dimer has a novel dimerization interface. Meanwhile, the N-finger deletion mutant of SARS-CoV M(pro) also exists as both a stable monomer and a stable dimer, and the dimer is formed through the same C-terminal-domain interaction as that in the M(pro)-C dimer. However, no C-terminal domain-mediated dimerization form can be detected for wild-type SARS-CoV M(pro). Our study results help to clarify previously published controversial claims about the role of the N-finger in SARS-CoV M(pro) dimerization. Apparently, without the N-finger, SARS-CoV M(pro) can no longer retain the active dimer structure; instead, it can form a new type of dimer which is inactive. Therefore, the N-finger of SARS-CoV M(pro) is not only critical for its dimerization but also essential for the enzyme to form the enzymatically active dimer.     

Mutation of Gly-11 on the dimer interface results in the complete crystallographic dimer dissociation of severe acute respiratory syndrome coronavirus 3C-like protease: crystal structure with molecular dynamics simulations

SARS-CoV 3C-like protease (3CL(pro)) is an attractive target for anti-severe acute respiratory syndrome (SARS) drug discovery, and its dimerization has been extensively proved to be indispensable for enzymatic activity. However, the reason why the dissociated monomer is inactive still remains unclear due to the absence of the monomer structure. In this study, we showed that mutation of the dimer-interface residue Gly-11 to alanine entirely abolished the activity of SARS-CoV 3CL(pro). Subsequently, we determined the crystal structure of this mutant and discovered a complete crystallographic dimer dissociation of SARS-CoV 3CL(pro). The mutation might shorten the alpha-helix A' of domain I and cause a mis-oriented N-terminal finger that could not correctly squeeze into the pocket of another monomer during dimerization, thus destabilizing the dimer structure. Several structural features essential for catalysis and substrate recognition are severely impaired in the G11A monomer. Moreover, domain III rotates dramatically against the chymotrypsin fold compared with the dimer, from which we proposed a putative dimerization model for SARS-CoV 3CL(pro). As the first reported monomer structure for SARS-CoV 3CL(pro), the crystal structure of G11A mutant might provide insight into the dimerization mechanism of the protease and supply direct structural evidence for the incompetence of the dissociated monomer.     

Molecular mechanism for dimerization to regulate the catalytic activity of human cytomegalovirus protease

Biochemical studies indicate that dimerization is required for the catalytic activity of herpesvirus proteases, whereas structural studies show a complete active site in each monomer, away from the dimer interface. Here we report kinetic, biophysical and crystallographic characterizations of structure-based mutants in the dimer interface of human cytomegalovirus (HCMV) protease. Such mutations can produce a 1,700-fold reduction in the kcat while having minimal effects on the K(m). Dimer stability is not affected by these mutations, suggesting that dimerization itself is insufficient for activity. There are large changes in monomer conformation and dimer organization of the apo S225Y mutant enzyme. However, binding of an activated peptidomimetic inhibitor induced a conformation remarkably similar to the wild type protease. Our studies suggest that appropriate dimer formation may be required to indirectly stabilize the protease oxyanion hole, revealing a novel mechanism for dimerization to regulate enzyme activity.     

Loss of protease dimerization inhibition activity of darunavir is associated with the acquisition of resistance to darunavir by HIV-1

Dimerization of HIV protease is essential for the acquisition of protease's proteolytic activity. We previously identified a group of HIV protease dimerization inhibitors, including darunavir (DRV). In the present work, we examine whether loss of DRV's protease dimerization inhibition activity is associated with HIV development of DRV resistance. Single amino acid substitutions, including I3A, L5A, R8A/Q, L24A, T26A, D29N, R87K, T96A, L97A, and F99A, disrupted protease dimerization, as examined using an intermolecular fluorescence resonance energy transfer (FRET)-based HIV expression assay. All recombinant HIV(NL4-3)-based clones with such a protease dimerization-disrupting substitution failed to replicate. A highly DRV-resistant in vitro-selected HIV variant and clinical HIV strains isolated from AIDS patients failing to respond to DRV-containing antiviral regimens typically had the V32I, L33F, I54M, and I84V substitutions in common in protease. None of up to 3 of the 4 substitutions affected DRV's protease dimerization inhibition, which was significantly compromised by the four combined substitutions. Recombinant infectious clones containing up to 3 of the 4 substitutions remained sensitive to DRV, while a clonal HIV variant with all 4 substitutions proved highly resistant to DRV with a 205-fold 50% effective concentration (EC(50)) difference compared to HIV(NL4-3). The present data suggest that the loss of DRV activity to inhibit protease dimerization represents a novel mechanism contributing to HIV resistance to DRV. The finding that 4 substitutions in PR are required for significant loss of DRV's protease dimerization inhibition should at least partially explain the reason DRV has a high genetic barrier against HIV's acquisition of DRV resistance.     

Effect of the active site D25N mutation on the structure, stability, and ligand binding of the mature HIV-1 protease

All aspartic proteases, including retroviral proteases, share the triplet DTG critical for the active site geometry and catalytic function. These residues interact closely in the active, dimeric structure of HIV-1 protease (PR). We have systematically assessed the effect of the D25N mutation on the structure and stability of the mature PR monomer and dimer. The D25N mutation (PR(D25N)) increases the equilibrium dimer dissociation constant by a factor >100-fold (1.3 +/- 0.09 microm) relative to PR. In the absence of inhibitor, NMR studies reveal clear structural differences between PR and PR(D25N) in the relatively mobile P1 loop (residues 79-83) and flap regions, and differential scanning calorimetric analyses show that the mutation lowers the stabilities of both the monomer and dimer folds by 5 and 7.3 degrees C, respectively. Only minimal differences are observed in high resolution crystal structures of PR(D25N) complexed to darunavir (DRV), a potent clinical inhibitor, or a non-hydrolyzable substrate analogue, Ac-Thr-Ile-Nle-r-Nle-Gln-Arg-NH(2) (RPB), as compared with PR.DRV and PR.RPB complexes. Although complexation with RPB stabilizes both dimers, the effect on their T(m) is smaller for PR(D25N) (6.2 degrees C) than for PR (8.7 degrees C). The T(m) of PR(D25N).DRV increases by only 3 degrees C relative to free PR(D25N), as compared with a 22 degrees C increase for PR.DRV, and the mutation increases the ligand dissociation constant of PR(D25N).DRV by a factor of approximately 10(6) relative to PR.DRV. These results suggest that interactions mediated by the catalytic Asp residues make a major contribution to the tight binding of DRV to PR.     

Liberation of SARS-CoV main protease from the viral polyprotein: N-terminal autocleavage does not depend on the mature dimerization mode

The main protease (M^pro) plays a vital role in proteolytic processing of the polyproteins in the replicative cycle of SARS coronavirus (SARS-CoV). Dimerization of this enzyme has been shown to be indispensable for trans-cleavage activity. However, the auto-processing mechanism of M^pro, i.e. its own release from the polyproteins through autocleavage, remains unclear. This study elucidates the relationship between the N-terminal autocleavage activity and the dimerization of “immature” M^pro. Three residues (Arg4, Glu290, and Arg298), which contribute to the active dimer conformation of mature M^pro, are selected for mutational analyses. Surprisingly, all three mutants still perform N-terminal autocleavage, while the dimerization of mature protease and trans-cleavage activity following auto-processing are completely inhibited by the E290R and R298E mutations and partially so by the R4E mutation. Furthermore, the mature E290R mutant can resume N-terminal autocleavage activity when mixed with the “immature” C145A/E290R double mutant whereas its trans-cleavage activity remains absent. Therefore, the N-terminal auto-processing of M^pro appears to require only two “immature” monomers approaching one another to form an “intermediate” dimer structure and does not strictly depend on the active dimer conformation existing in mature protease. In conclusion, an auto-release model of M^pro from the polyproteins is proposed, which will help understand the auto-processing mechanism and the difference between the autocleavage and trans-cleavage proteolytic activities of SARS-CoV M^pro.