Nucleotide sequence and characterization of a repetitive DNA element from the genome of Bordetella pertussis with characteristics of an insertion sequence

A repeating element of DNA has been isolated and sequenced from the genome of Bordetella pertussis. Restriction map analysis of this element shows single internal ClaI, SphI, BstEII and SalI sites. Over 40 DNA fragments are seen in ClaI digests of B. pertussis genomic DNA to which the repetitive DNA sequence hybridizes. Sequence analysis of the repeat reveals that it has properties consistent with bacterial insertion sequence (IS) elements. These properties include its length of 1053 bp, multiple copy number and presence of 28 bp of near-perfect inverted repeats at its termini. Unlike most IS elements, the presence of this element in the B. pertussis genome is not associated with a short duplication in the target DNA sequence. This repeating element is not found in the genomes of B. parapertussis or B. bronchiseptica. Analysis of a DNA fragment adjacent to one copy of the repetitive DNA sequence has identified a different repeating element which is found in nine copies in B. parapertussis and four copies in B. pertussis, suggesting that there may be other repeating DNA elements in the different Bordetella species. Computer analysis of the B. pertussis repetitive DNA element has revealed no significant nucleotide homology between it and any other bacterial transposable elements, suggesting that this repetitive sequence is specific for B. pertussis.     

Localization of specific repetitive DNA sequences in individual rice chromosomes

This paper describes the characterization and chromosomal distribution of three different rice (Oryza sativa) repetitive DNA sequences. The three sequences were characterized by sequence analysis, which gave 355, 498 and 756 bp for the length of the repeat unit in Os48, OsG3-498 and OsG5-756, respectively. Copy number determination by quantitative DNA slot-blot hybridization analysis showed 4000, 1080 and 920 copies, respectively, per haploid rice genome for the three sequences. In situ DNA hybridization analysis revealed that 95% of the silver grains detected with the Os48 probe were localized to euchromatic ends of seven long arms and one short arm out of the 12 rice chromosomes. For the OsG3-498 repetitive sequence, the majority of silver grains (58%) were also clustered at the same chromosomal ends as that of Os48. The minority (28%) of silver grains were located at heterochromatic short arms and centromeric regions. For the OsG5-756 repetitive sequence, 81% of the silver grains labeled the heterochromatic short arms and regions flanking all of the 12 centromeres. Thus, each of these three repetitive sequences was distributed at specific defined chromosomal locations rather than randomly at many chromosomal locations. The approximate copy number of a given repetitive DNA sequence at any specific chromosomal location was calculated by combining the information from in situ DNA hybridization analysis and the total copy number as determined by DNA slot-blot hybridization.by J. Huberman     

Molecular cloning and characterization of novel centromeric repetitive DNA sequences in the blue-breasted quail (Coturnix chinensis,Galliformes)

A new family of centromeric highly repetitive DNA sequences was isolated from EcoRI-digested genomic DNA of the blue-breasted quail (Coturnix chinensis, Galliformes), and characterized by filter hybridization and chromosome in situ hybridization. The repeated elements were divided into two types by nucleotide length and chromosomal distribution; the 578-bp element predominantly localized to microchromosomes and the 1,524-bp element localized to chromosomes 1 and 2. The 578-bp element represented tandem arrays and did not hybridize to genomic DNAs of other Galliformes species, chicken (Gallus gallus), Japanese quail (Coturnix japonica) and guinea fowl (Numida meleagris). On the other hand, the 1,524-bp element was not organized in tandem arrays, and did hybridize to the genomic DNAs of three other Galliformes species, suggesting that the 1,524-bp element is highly conserved in the Galliformes. The 578-bp element was composed of basic 20-bp internal repeats, and the consensus nucleotide sequence of the internal repeats had homologies to the 41-42 bp CNM repeat and the XHOI family repeat of chicken. Our data suggest that the microchromosome-specific highly repetitive sequences of the blue-breasted quail and chicken were derived from a common ancestral sequence, and that they are one of the major and essential components of chromosomal heterochromatin in Galliformes species.     

Identification of a conserved sequence in the non-coding regions of many human genes.

We have analyzed a sequence of approximately 70 base pairs (bp) that shows a high degree of similarity to sequences present in the non-coding regions of a number of human and other mammalian genes. The sequence was discovered in a fragment of human genomic DNA adjacent to an integrated hepatitis B virus genome in cells derived from human hepatocellular carcinoma tissue. When one of the viral flanking sequences was compared to nucleotide sequences in GenBank, more than thirty human genes were identified that contained a similar sequence in their non-coding regions. The sequence element was usually found once or twice in a gene, either in an intron or in the 5' or 3' flanking regions. It did not share any similarities with known short interspersed nucleotide elements (SINEs) or presently known gene regulatory elements. This element was highly conserved at the same position within the corresponding human and mouse genes for myoglobin and N-myc, indicating evolutionary conservation and possible functional importance. Preliminary DNase I footprinting data suggested that the element or its adjacent sequences may bind nuclear factors to generate specific DNase I hypersensitive sites. The size, structure, and evolutionary conservation of this sequence indicates that it is distinct from other types of short interspersed repetitive elements. It is possible that the element may have a cis-acting functional role in the genome.     

The beta globin gene cluster of the prosimian primate Galago crassicaudatus: nucleotide sequence determination of the 41-kb cluster and comparative sequence analyses.

The nucleotide sequence of the beta globin gene cluster of the prosimian Galago crassicaudatus has been determined. A total sequence spanning 41,101 bp contains and links together previously published sequences of the five galago beta-like globin genes (5'-epsilon-gamma-psi eta-delta-beta-3'). A computer-aided search for middle interspersed repetitive sequences identified 10 LINE (L1) elements, including a 5' truncated repeat that is orthologous to the full-length L1 element found in the human epsilon-gamma intergenic region. SINE elements that were identified included one Alu type I repeat, four Alu type II repeats, and two methionine tRNA-derived Monomer (type III) elements. Alu type II and Monomer sequences are unique to the galago genome. Structural analyses of the cluster sequence reveals that it is relatively A+T rich (about 62%) and regions with high G+C content are associated primarily with globin coding regions. Comparative analyses with the beta globin cluster sequences of human, rabbit, and mouse reveal extensive sequence homologies in their genic regions, but only human, galago, and rabbit sequences share extensive intergenic sequence homologies. Divergence analyses of aligned intergenic and flanking sequences from orthologous human, galago, and rabbit sequences show a gradation in the rate of nucleotide sequence evolution along the cluster where sequences 5' of the epsilon globin gene region show the least sequence divergence and sequences just 5' of the beta globin gene region show the greatest sequence divergence.     

Co-amplification of L1 line elements with localised low copy repeats in Giemsa dark bands: implications for genome organisation.

A repeat sequence island, located at the A3 Giemsa dark band on the mouse X chromosome and consisting of 50 copies of a localised long complex repeat unit (LCRU), features an unusually high concentration of L1 LINE repeat sequences juxtaposed and inserted within the LCRU. Sequence analysis of three independent genomic clones containing L1 LINE elements juxtaposed with the LCRU demonstrates a common junction sequence at the L1/LCRU boundary, suggesting that the high concentration of L1 LINE sequences in the repeat sequence island has arisen by association of an L1 element with an LCRU followed by amplification. The LCRU target site at this common junction sequence bears no resemblance to the target site of an L1 element inserted within one LCRU, indicating there is no specific preferential target site for L1 integration. We propose that co-amplification of L1 LINE elements with localised low copy repeat families throughout the genome could have a major effect on the chromosomal distribution of L1 LINE elements.     

Organization of the human myoglobin gene.

Cross-hybridization of the grey seal myoglobin gene to human DNA detected a single human myoglobin gene plus an extensive family of sequences apparently related to the central exon of this gene. The functional human gene is 10.4 kb long and has a haemoglobin-like three exon/two intron structure with long non-coding regions similar to its seal homologue. At least 300 bp of 5'-flanking region are closely homologous between the two genes, with the exception of a divergent purine-rich region 68-114 bp upstream of the cap site. A diverged tandem repetitive sequence based on (GGAT)165 is located 1100-1750 bp upstream from the gene; internal homology units within this sequence suggest sequence homogenization by gene microconversions. A second 33-bp tandem repeat element in the first intron is flanked by a 9-bp direct repeat, shares homology with other tandem repetitive elements in the human genome and may represent a novel form of transposable element.     

Rapid isolation of DNA probes within specific chromosome regions by interspersed repetitive sequence polymerase chain reaction

A method was recently developed for the specific amplification of human DNA sequences from interspecific somatic cell hybrids by the polymerase chain reaction (PCR) using primers directed to Alu, a short interspersed repeat element (SINE). We now show human-specific amplification using a primer to the 3' end of the human long interspersed repeat element L1Hs (LINE). A monochromosomal hybrid containing an intact human X chromosome yielded approximately 25 discrete products, ranging in size from 800 to 4500 bp. Combination of a single Alu primer and the L1Hs primer yielded a large number of smaller products (300-1000 bp) distinct from those observed with either primer alone. Inspection of ethidium bromide-stained gels showed one Alu-Alu and three Alu-L1Hs products which were present in an intact X chromosome but absent in a hybrid containing an X chromosome deleted for the single metaphase band q28. These four fragments were isolated from the gel and used as probes on Southern blots which confirmed their localization to Xq28. These results demonstrate that primers can be constructed to a variety of interspersed repetitive sequences (IRS) and used individually or in combination for the rapid isolation of DNA fragments from defined chromosomal regions by IRS-PCR.     

Cloning and Characterization of New Repetitive Sequences in Field Bean (Vicia fabaL.)

Five new repetitive sequences have been isolated from theViciafabagenome, by cloning bands visible on agarose gel electrophoresisafter digestion of genomic DNA with various restriction enzymes.The sequences were 109 to 584 bp long, their abundance rangingfrom 5x10⁴to 5x10⁵copies per haploid genome. Southern blot andinsituhybridization revealed that four of five newly isolatedrepeats were dispersed in theV. fabagenome. One of the repeats(TIII15) showed tandem organization with several major hybridizationspots on mitotic chromosomesin situ.These sites were distributedin euchromatic as well as in heterochromatic chromosomal regions,and in several loci they were simultaneously localized withpreviously describedFokI repeated elements. The sequence ofTIII15 comprises four 26–27 bp subrepeats, but sharesno homology toFokI elements which have similar sequence organization.All newly described sequences were highly specific forV. faba,withlittle or no hybridization to DNA of otherViciaspecies, andno hybridization to DNA of other legumes tested.Copyright 1999Annals of Botany Company Vicia faba, field bean, repeated DNA sequences, FISH, PRINS, genome organization, copy number.     

Isolation and sequence analysis ofCaenorhabditis briggsae repetitive elements related to theCaenorhabditis elegans transposon Tc1

Summary We have identified two repetitive element families in the genome of the nematodeCaenorhabditis briggsae with extensive sequence identity to theCaenorhabditis elegans transposable element Tc1. Five members each of the TCb1 (previously known as Barney) and TCb2 families were isolated by hybridization to a Tc1 probe. Tc1-hybridizing repetitive elements were grouped into either the TCb1 or TCb2 family based on cross-hybridization intensities among theC. briggsae elements. The genomic copy number of the TCb1 family is 15 and the TCb2 family copy number is 33 in theC. briggsae strain G16. The two transposable element families show numerous genomic hybridization pattern differences between twoC. briggsae strains, suggestive of transpositional activity. Two members of the TCb1 family, TCb1#5 and TCb1#10, were sequenced. Each of these two elements had suffered an independent single large deletion. TCb1#5 had a 627-bp internal deletion and TCb1#10 had lost 316 bp of one end. The two sequenced TCb1 elements were highly conserved over the sequences they shared. A 1616-bp composite TCb1 element was constructed from TCb1#5 and TCb1#10. The composite TCb1 element has 80-bp terminal inverted repeats with three nucleotide mismatches and two open reading frames (ORFs) on opposite strands. TCb1 and the 1610-bp Tc1 share 58% overall nucleotide sequence identity, and the greatest similarity occurs in their ORF1 and inverted repeat termini.     

Electrophoretic Karyotype of the Obligate Biotrophic Parasite Plasmodiophora brassicae Wor.

Classical genetic analysis is not possible with the protist Plasmodiophora brassicae due to the intracellular life of this obligate biotrophic parasite . An electrophoretic karyotype has been obtained using contour-clamped homogeneous electric field gel electrophoresis to facilitate gene mapping of P. brassicae. Using two different separation conditions 16 chromosomal bands of P. brassicae were distinguished ranging in approximate size from 2.2 Mb to 680 kb. According to this determination of chromosome number and size, the total genome size of P. brassicae was estimated to be 20.3 Mb. The chromosomal bands were further designated by their hybridization pattern with repetitive elements of P. brassicae . The repetitive element H4 (1800 bp) hybridized with 14 chromosomal bands, but the sequence of H4 showed no homology to known centromere or telomere structures and revealed no repetitive motifs.     

A chromosome 5-specific repetitive DNA sequence in rice (Oryza sativa L)

Repetitive DNA sequences in the rice genome comprise more than half of the nuclear DNA. The isolation and characterization of these repetitive DNA sequences should lead to a better understanding of rice chromosome structure and genome organization. We report here the characterization and chromosome localization of a chromosome 5-specific repetitive DNA sequence. This repetitive DNA sequence was estimated to have at least 900 copies. DNA sequence analysis of three genomic clones which contain the repeat unit indicated that the DNA sequences have two sub-repeat units of 37 bp and 19 bp, connected by 30-to 90-bp short sequences with high similarity. RFLP mapping and physical mapping by fluorescence in situ hybridization (FISH) indicated that almost all copies of the repetitive DNA sequence are located in the centromeric heterochromatic region of the long arm of chromosome 5. The strategy for cloning such repetitive DNA sequences and their uses in rice genome research are discussed.     

Terminal structure and heterogeneity in human cytomegalovirus strain AD169.

We have characterized the heterogeneity occurring at the junction of the long (L) and short (S) segments and at the termini of the strain AD169 human cytomegalovirus (HCMV) genome by restriction endonuclease mapping and nucleotide sequence analyses. The HCMV a sequence was identified by its position at both termini and inverted orientation at the L-S junction. Heterogeneity at both termini and the L-S junction was generated by the presence of fused and tandem a sequences. Some S termini lacked an a sequence. In addition, near the L terminus and at the L-S junction there were a variable number of 217-base-pair (bp) XhoI fragments arranged in tandem. The 217-bp fragments consisted of a portion of the a and adjacent b sequences (in the L-segment repeat) bounded by the same direct repeats (DR1) found at the boundaries of the a sequence. A model for the generation of these heterogeneous fragments is presented. We also determined the sequence of seven cloned terminal fragments, five from the L terminus and two from the S terminus. All L termini contained identical terminal sequences ending with base 32 of a 33-bp DR1. The S termini differed from each other and from the L-segment termini. One S terminus lacked an a sequence and terminated within S-segment repeat (c) sequences. The second S terminus contained an a sequence and terminated with bases 20 to 33 of a 33-bp DR1. A comparison of the cloned L and S terminal sequences with cloned L-S junction sequences suggested that the termini contained 3' single base extensions which were removed during the cloning. We also show that the herpesvirus conserved sequence is in a similar position relative to the termini of HCMV and several other herpesviruses, thus adding further support for the role of the sequence in the maturation of viral DNA.     

Tnat1 and Tnat2 from Arabidopsis thaliana: novel transposable elements with tandem repeat sequences.

A computer-aided homology search of databases found that the nucleotide sequences flanking ATLN44, a non-LTR retrotransposon (LINE) from Arabidopsis thaliana, are repeated in the A. thaliana genome. These sequences are homologous to flanking sequences of 664 bp with terminal inverted repeat sequences of about 70 bp. The 664-bp sequence and most of the 14 homologues identified were flanked by direct repeat sequences of 9 bp. These findings indicate that the repeated sequence, named Tnat1, is a transposable element that duplicates a 9-bp sequence at the target site on transposition and that ATLN44 is inserted in one Tnat1 member. Interestingly, all of the Tnat1 members had tandem repeats comprised of several units of a 60-bp sequence, the number of repeats differing among Tnat1 members. Of the Tnat1 members identified, one was inserted into another sequence repeated in the A. thaliana genome: that sequence is about 770 bp long and has terminal inverted repeat sequences of about 110 bp. The sequence is flanked by direct repeats of a 9-bp sequence, indicating that it is another transposable element, named Tnat2, from A. thaliana. Moreover, Tnat2 members had a tandem repeat about 240 bp long. Tnat1 and Tnat2 with tandem repeats in their internal regions show no homology to each other or to any of the elements identified previously; therefore they appear to be novel transposable elements.     

The human THE-LTR(O) and MstII interspersed repeats are subfamilies of a single widely distributed highly variable repeat family.

Fifteen examples of the transposon-like human element (THE) LTR and thirteen examples of the MstII interspersed repeat are aligned to generate new consensus sequences for these human repetitive elements. The consensus sequences of these elements are very similar, indicating that they compose subfamilies of a single human interspersed repetitive sequence family. Members of this highly polymorphic repeat family have been mapped to at least 11 chromosomes. Seven examples of the THE internal sequence are also aligned to generate a new consensus sequence for this element. Estimates of the abundance of this repetitive sequence family, derived from both hybridization analysis and frequency of occurrence in GenBank, indicate that THE-LTR/MstII sequences are present every 100-3000 kb in human DNA. The widespread occurrence of members of this family makes them useful landmarks, like Alu, L1, and (GT)n repeats, for physical and genetic mapping of human DNA.     

Short interspersed repeats from Xenopus that contain multiple octamer motifs are related to known transposable elements.

We have identified in an intron of an X. laevis alpha-tubulin gene a member of a novel family of short (226-431 bp) interspersed repetitive elements. We have isolated other members of this family, which we term Ocr, from ovary cDNA and genome libraries and have identified another two in the published sequences of an H1B histone gene cluster and an actin gene intron. The termini of the Ocr elements are formed by a 19 bp inverted repeat that has clear sequence homologies to those of certain large transposable elements, such as 1723 (Xenopus) and Ac (maize). However, the Ocr elements do not appear to be deletion derivatives of larger transposons. The internal regions of the Ocr elements contain multiple copies of the octamer motif (ATTTGCAT) arranged as divergently-orientated dyads. We have shown by a gel mobility shift assay that these octamer dyads specifically bind what is presumably an OTF-type activator protein in oocyte nuclear extracts. We speculate that short interspersed repetitive families of this type may be generated by a mechanism of replicative transposition that uses a DNA intermediate and involves the interaction of DNA-binding proteins also utilised in other cellular processes.     

A molecular and cytogenetic survey of major repeated DNA sequences in tomato (Lycopersicon esculentum)

Summary The major families of repeated DNA sequences in the genome of tomato (Lycopersicon esculentum) were isolated from a sheared DNA library. One thousand clones, representing one million base pairs, or 0.15% of the genome, were surveyed for repeated DNA sequences by hybridization to total nuclear DNA. Four major repeat classes were identified and characterized with respect to copy number, chromosomal localization by in situ hybridization, and evolution in the family Solanaceae. The most highly repeated sequence, with approximately 77000 copies, consists of a 162 bp tandemly repeated satellite DNA. This repeat is clustered at or near the telomeres of most chromosomes and also at the centromeres and interstitial sites of a few chromosomes. Another family of tandemly repeated sequences consists of the genes coding for the 45 S ribosomal RNA. The 9.1 kb repeating unit in L. esculentum was estimated to be present in approximately 2300 copies. The single locus, previously mapped using restriction fragment length polymorphisms, was shown by in situ hybridization as a very intense signal at the end of chromosome 2. The third family of repeated sequences was interspersed throughout nearly all chromosomes with an average of 133 kb between elements. The total copy number in the genome is approximately 4200. The fourth class consists of another interspersed repeat showing clustering at or near the centromeres in several chromosomes. This repeat had a copy number of approximately 2100. Sequences homologous to the 45 S ribosomal DNA showed cross-hybridization to DNA from all solanaceous species examined including potato, Datura, Petunia, tobacco and pepper. In contrast, with the exception of one class of interspersed repeats which is present in potato, all other repetitive sequences appear to be limited to the crossing-range of tomato. These results, along with those from a companion paper (Zamir and Tanksley 1988), indicate that tomato possesses few highly repetitive DNA sequences and those that do exist are evolving at a rate higher than most other genomic sequences.     

A novel human nonviral retroposon derived from an endogenous retrovirus.

In a human genome, we found dispersed repetitive sequences homologous to part of a human endogenous retrovirus termed HERV-K which resembled mouse mammary tumor virus. For elucidation of their structure and organization, we cloned some of these sequences from a human gene library. The sequence common to the cloned DNA was ca. 630 base-pairs (bp) in length with an A-rich tail at the 3' end and was found to be a SINE (short interspersed repeated sequence) type nonviral retroposon. In this retroposon, the 5' end had multiple copies of a 40 bp direct repeat very rich in GC content and about the next 510 nucleotides were homologous to the 3' long terminal repeat and its upstream flanking region of the HERV-K genome. This retroposon was thus given the name, SINE-R element since most of it derived from a retrovirus. SINE-R elements were present at 4,000 to 5,000 copies per haploid human genome. The nucleotide sequence was ca. 90% homologous among the cloned elements.     

Characterization of tomato DNA clones with sequence similarity to human minisatellites 33.6 and 33.15

A tomato lambda genomic library was screened with the human minisatellites 33.6 and 33.15. Similar tomato sequences are estimated to occur on average every 4000 kb. In thirteen hybridizing clones characterized, the size of minisatellite arrays varied between 100 bp and 3 kb. The structure of the repetitive elements is complex as the human core sequence is interspersed with other elements. In three cases, sequences similar to the human minisatellites were part of a higher-order tandem repeat. The chromosomal position of these sequences was established by ascertaining linkage to previously mapped RFLP markers. In contrast to the human genome, no clustering of minisatellite loci was observed in tomato. The fingerprints generated by hybridizing tomato minisatellites to genomic DNA of a set of cultivars were, in two cases, more variable than those obtained with 33.6 or 33.15. Two of the characterized probes detected 4–8 alleles of a single locus, which displayed 10–15 times more polymorphism than random RFLP clones. Some minisatellites contain di- and tri-nucleotide microsatellite repeated motifs which may account for the high level of polymorphism detected with these clones.