Synthetic model proteins: the relative contribution of leucine residues at the nonequivalent positions of the 3-4 hydrophobic repeat to the stability of the two-stranded alpha-helical coiled-coil.

Our de novo designed coiled-coil model protein consists of two identical 35-residue polypeptide chains arranged in a parallel and in-register alignment via interchain hydrophobic interactions and a disulfide bridge at the position 2 between two helices. To quantitate the relative contribution of leucine residues at the nonequivalent position of the 3-4 hydrophobic repeat to the stability of the two-stranded alpha-helical coiled-coil, a single alanine was systematically substituted for a leucine in each chain at position "a" (9, 16, 23, or 30) or "d" (5, 12, 19, 26, or 33). The formation and stability of the coiled-coils were determined by circular dichroism studies in the absence and presence of guanidine hydrochloride. All the proteins with an alanine substituted at position a have a similar stability ([Gdn.HCl]1/2 ranges from 2.6 to 2.9 M), while all the proteins with an alanine substituted at position d have similar stability ([Gdn.HCl]1/2 ranges from 3.6 to 4.2 M), except for the proteins with an alanine substituted in the C-terminal heptad. The greater decrease in stability observed for a Leu----Ala mutation at position a (the average delta delta Gu value is 3.3 kcal/mol) compared to those where the substitution was effected at position d (the average delta delta Gu value is 2.0 kcal/mol) indicates that an Ala mutation at position a has a greater effect on the side-chain packing and hydrophobic interactions in the coiled-coil than an Ala mutation at position d.(ABSTRACT TRUNCATED AT 250 WORDS)     

The two-stranded alpha-helical coiled-coil is an ideal model for studying protein stability and subunit interactions.

We have designed de novo a two-stranded alpha-helical coiled-coil which consists of two identical 35-residue polypeptide chains arranged in a parallel and in-register alignment. Their structure is stabilized by interchain hydrophobic interactions from hydrophobes at positions "a" and "d" of a repeating heptad sequence. The formation and stability of the coiled-coil is dependent on peptide concentration due to the monomer-dimer equilibrium. In contrast, that coiled-coil containing an inter-helical disulfide bond does not show any concentration dependence in the guanidine hydrochloride denaturation experiments as expected. Replacement of one large hydrophobic Leu residue in each chain with Ala significantly decreases coiled-coil stability in both the reduced and oxidized coiled-coils [decreases in transition midpoint of 1.6M (2.3-0.7) and 2.4M (5.3-2.9), respectively]. A large pH dependence on coiled-coil stability is observed over the pH range 4 to 7 (transition midpoints at pH 4, 5, 5.5, 6 and 7 were 3.8, 3.2, 2.0, 1.2 and 0.7M, respectively). The increasing stability with decreasing pH correlates with the protonation of the Glu acid side-chains and reduction of intrachain repulsions between Glu-Glu side-chains in positions i, i + 3 or i, i + 4 along each alpha-helix of the coiled-coil. In addition, coiled-coil stability increases with increasing ionic strength.     

Effects of side-chain characteristics on stability and oligomerization state of a de novo-designed model coiled-coil: 20 amino acid substitutions in position "d"

We describe the de novo design and biophysical characterization of a model coiled-coil protein in which we have systematically substituted 20 different amino acid residues in the central "d" position. The model protein consists of two identical 38 residue polypeptide chains covalently linked at their N termini via a disulfide bridge. The hydrophobic core contained Val and Ile residues at positions "a" and Leu residues at positions "d". This core allowed for the formation of both two-stranded and three-stranded coiled-coils in benign buffer, depending on the substitution at position "d". The structure of each analog was analyzed by CD spectroscopy and their relative stability determined by chemical denaturation using GdnHCI (all analogs denatured from the two-stranded state). The oligomeric state(s) was determined by high-performance size-exclusion chromatography and sedimentation equilibrium analysis in benign medium. Our results showed a thermodynamic stability order (in order of decreasing stability) of: Leu, Met, Ile, Tyr, Phe, Val, Gln, Ala, Trp, Asn, His, Thr, Lys, Ser, Asp, Glu, Arg, Orn, and Gly. The Pro analog prevented coiled-coil formation. The overall stability range was 7.4 kcal/mol from the lowest to the highest analog, indicating the importance of the hydrophobic core and the dramatic effect a single substitution in the core can have upon the stability of the protein fold. In general, the side-chain contribution to the level of stability correlated with side-chain hydrophobicity. Molecular modelling studies, however, showed that packing effects could explain deviations from a direct correlation. In regards to oligomerization state, eight analogs demonstrated the ability to populate exclusively one oligomerization state in benign buffer (0.1 M KCl, 0.05 M K(2)PO(4)(pH 7)). Ile and Val (the beta-branched residues) induced the three-stranded oligomerization state, whereas Tyr, Lys, Arg, Orn, Glu and Asp induced the two-stranded state. Asn, Gln, Ser, Ala, Gly, Phe, Leu, Met and Trp analogs were indiscriminate and populated two-stranded and three-stranded states. Comparison of these results with similar substitutions in position "a" highlights the positional effects of individual residues in defining the stability and numbers of polypeptide chains occurring in a coiled-coil structure. Overall, these results in conjunction with other work now generate a relative thermodynamic stability scale for 19 naturally occurring amino acid residues in either an "a" or "d" position of a two-stranded coiled-coil. Thus, these results will aid in the de novo design of new coiled-coil structures, a better understanding of their structure/function relationships and the design of algorithms to predict the presence of coiled-coils within native protein sequences.     

Protein destabilization by electrostatic repulsions in the two-stranded alpha-helical coiled-coil/leucine zipper.

The destabilizing effect of electrostatic repulsions on protein stability has been studied by using synthetic two-stranded alpha-helical coiled-coils as a model system. The native coiled-coil consists of two identical 35-residue polypeptide chains with a heptad repeat QgVaGbAcLdQeKf and a Cys residue at position 2 to allow formation of an interchain disulfide bridge. This peptide, designed to contain no intrahelical or interhelical electrostatic interactions, forms a stable coiled-coil structure at 20 degrees C in benign medium (50 mM KCl, 25 mM PO4, pH 7) with a [urea]1/2 value of 6.1 M. Four mutant coiled-coils were designed to contain one or two Glu substitutions for Gln per polypeptide chain. The resulting coiled-coils contained potential i to i' + 5 Glu-Glu interchain repulsions (denoted as peptide E2(15,20)), i to i' + 2 Glu-Glu interchain repulsions (denoted E2(20,22)), or no interchain ionic interactions (denoted E2(13,22) and E1(20)). The stabilities of the coiled-coils were determined by measuring the ellipticities at 222 nm as a function of urea or guanidine hydrochloride concentration at 20 degrees C in the presence and absence of an interchain disulfide bridge. At pH 7, in the presence of urea, the stabilities of E2(13,22) and E2(20,22) were identical suggesting that the potential i to i' + 2 interchain Glu-Glu repulsion in the E2(20,22) coiled-coil does not occur. In contrast, the mutant E2(15,20) is substantially less stable than E2(13,22) or E2(15,20) by 0.9 kcal/mol due to the presence of two i to i' + 5 interchain Glu-Glu repulsions, which destabilize the coiled-coil by 0.45 kcal/mol each. At pH 3 the coiled-coils were found to increase in stability as the number of Glu substitutions were increased. This, combined with reversed-phase HPLC results at pH 7 and pH 2, supports the conclusion that the protonated Glu side chains present at low pH are significantly more hydrophobic than Gln side chains which are in turn more hydrophobic than the ionized Glu side chains present at neutral pH. The protonated Glu residues increase the hydrophobicity of the coiled-coil interface leading to higher coiled-coil stability. The guanidine hydrochloride results at pH 7 show similar stabilities between the native and mutant coiled-coils indicating that guanidine hydrochloride masks electrostatic repulsions due to its ionic nature and that Glu and Gln in the e and g positions of the heptad repeat have very similar effects on coiled-coil stability in the presence of GdnHCl.     

Unique stabilizing interactions identified in the two-stranded alpha-helical coiled-coil: crystal structure of a cortexillin I/GCN4 hybrid coiled-coil peptide

We determined the 1.17 A resolution X-ray crystal structure of a hybrid peptide based on sequences from coiled-coil regions of the proteins GCN4 and cortexillin I. The peptide forms a parallel homodimeric coiled-coil, with C(alpha) backbone geometry similar to GCN4 (rmsd value 0.71 A). Three stabilizing interactions have been identified: a unique hydrogen bonding-electrostatic network not previously observed in coiled-coils, and two other hydrophobic interactions involving leucine residues at positions e and g from both g-a' and d-e' interchain interactions with the hydrophobic core. This is also the first report of the quantitative significance of these interactions. The GCN4/cortexillin hybrid surprisingly has two interchain Glu-Lys' ion pairs that form a hydrogen bonding network with the Asn residues in the core. This network, which was not observed for the reversed Lys-Glu' pair in GCN4, increases the combined stability contribution of each Glu-Lys' salt bridge across the central Asn15-Asn15' core to approximately 0.7 kcal/mole, compared to approximately 0.4 kcal mole(-1) from a Glu-Lys' salt bridge on its own. In addition to electrostatic and hydrogen bonding stabilization of the coiled-coil, individual leucine residues at positions e and g in the hybrid peptide also contribute to stability by 0.7 kcal/mole relative to alanine. These interactions are of critical importance to understanding the stability requirements for coiled-coil folding and in modulating the stability of de novo designed macromolecules containing this motif.     

Clustering of large hydrophobes in the hydrophobic core of two-stranded alpha-helical coiled-coils controls protein folding and stability

The de novo design and biophysical characterization of two 60-residue peptides that dimerize to fold as parallel coiled-coils with different hydrophobic core clustering is described. Our goal was to investigate whether designing coiled-coils with identical hydrophobicity but with different hydrophobic clustering of non-polar core residues (each contained 6 Leu, 3 Ile, and 7 Ala residues in the hydrophobic core) would affect helical content and protein stability. The disulfide-bridged P3 and P2 differed dramatically in alpha-helical structure in benign conditions. P3 with three hydrophobic clusters was 98% alpha-helical, whereas P2 was only 65% alpha-helical. The stability profiles of these two analogs were compared, and the enthalpy and heat capacity changes upon denaturation were determined by measuring the temperature dependence by circular dichroism spectroscopy and confirmed by differential scanning calorimetry. The results showed that P3 assembled into a stable alpha-helical two-stranded coiled-coil and exhibited a native protein-like cooperative two-state transition in thermal melting, chemical denaturation, and calorimetry experiments. Although both peptides have identical inherent hydrophobicity (the hydrophobic burial of identical non-polar residues in equivalent heptad coiled-coil positions), we found that the context dependence of an additional hydrophobic cluster dramatically increased stability of P3 (Delta Tm approximately equal to 18 degrees C and Delta[urea](1/2) approximately equal to 1.5 M) as compared with P2. These results suggested that hydrophobic clustering significantly stabilized the coiled-coil structure and may explain how long fibrous proteins like tropomyosin maintain chain integrity while accommodating polar or charged residues in regions of the protein hydrophobic core.     

Helix capping interactions stabilize the N-terminus of the kinesin neck coiled-coil

In an effort to understand how specific structural features within the kinesin neck, a region of the heavy chain located between the catalytic core and stalk domains, may contribute to motor processivity (an ability to remain attached to the microtubule filament), we have prepared several synthetic peptides corresponding to the neck region of human conventional kinesin and determined their secondary structure content and stability by CD spectroscopy. Our results show that the coiled-coil dimerization domain within the human kinesin neck region corresponds to residues 337 to 369 in solution, and thus is in excellent agreement with the recent X-ray crystallographic structures of rat brain kinesin. Further, we show that the first and last heptads of this region are absolutely critical for creating the high stability and association of the dimeric structure. Interestingly, addition of the 7 N-terminal neck-linker residues (330-336) to the coiled-coil domain significantly increased its stability (Delta GdnHCl midpoint of 1 M or an increase of approximately 1.5 kcal/mol), indicating that a strong structural link exists between the neck-linker and coiled-coil region. Subsequent high-resolution structural analysis of the residues located at the junction of the neck-linker and coiled-coil revealed the presence of the two helix capping motifs, the capping box (a reciprocal interaction of Thr 336 with Gln 339) and the hydrophobic staple (a hydrophobic packing interaction of Leu 335 with Trp 340). Substitution of Leu 335 and Thr 336 (the capping residues) with Gly completely eliminated the increased stability of the coiled-coil region observed in the presence of the neck-linker residues. Correspondingly, substitution of Trp 340, the first hydrophobic core d position residue of the coiled-coil, with an Ala residue resulted in a greater than expected decrease in stability and helicity of the coiled-coil structure. Subsequent analysis of the X-ray structure and substitution analysis of Lys 341 revealed that Trp 340 makes an important interchain hydrophobic interaction with Lys 341 of the opposite chain. Taken together these results reveal that a set of strong intra- and inter-chain interactions made up of the helix "capping box," "hydrophobic staple," and the newly identified "Leu-Trp-Lys sandwich" motifs stabilize the kinesin neck coiled-coil structure, thus preventing it from fraying and unfolding.     

Detection of alpha-helical coiled-coil dimer formation by spin-labeled synthetic peptides: a model parallel coiled-coil peptide and the antiparallel coiled coil formed by a replica of the ProP C-terminus

Electron paramagnetic resonance spectroscopy was used to determine relative peptide orientation within homodimeric, alpha-helical coiled-coil structures. Introduction of cysteine (Cys) residues into peptides/proteins for spin labeling allows detection of their oligomerization from exchange broadening or dipolar interactions between residues within 25 A of each other. Two synthetic peptides containing Cys substitutions were used: a 35-residue model peptide and the 30-residue ProP peptide. The model peptide is known to form a stable, parallel homodimeric coiled coil, which is partially destabilized by Cys substitutions at heptad a and d positions (peptides C30a and C33d). The ProP peptide, a 30-residue synthetic peptide, corresponds to residues 468-497 of osmoregulatory transporter ProP from Escherichia coli. It forms a relatively unstable, homodimeric coiled coil that is predicted to be antiparallel in orientation. Cys was introduced in heptad g positions of the ProP peptide, near the N-terminus (K473C, creating peptide C473g) or closer to the center of the sequence (E480C, creating peptide C480g). In contrast to the destabilizing effect of Cys substitution at the core heptad a or d positions of model peptides C30a and C33d, circular dichroism spectroscopy showed that Cys substitutions at the heptad g positions of the ProP peptide had little or no effect on coiled-coil stability. Thermal denaturation analysis showed that spin labeling increased the stability of the coiled coil for all peptides. Strong exchange broadening was detected for both C30a and C33d, in agreement with a parallel structure. EPR spectra of C480g had a large hyperfine splitting of about 90 G, indicative of strong dipole-dipole interactions and a distance between spin-labeled residues of less than 9 A. Spin-spin interactions were much weaker for C473g. These results supported the hypothesis that the ProP peptide primarily formed an antiparallel coiled coil, since formation of a parallel dimer should result in similar spin-spin interactions for the spin-labeled Cys at both sites.     

Stabilizing and destabilizing clusters in the hydrophobic core of long two-stranded alpha-helical coiled-coils

Detailed sequence analyses of the hydrophobic core residues of two long two-stranded alpha-helical coiled-coils that differ dramatically in sequence, function, and length were performed (tropomyosin of 284 residues and the coiled-coil domain of the myosin rod of 1086 residues). Three types of regions were present in the hydrophobic core of both proteins: stabilizing clusters and destabilizing clusters, defined as three or more consecutive core residues of either stabilizing (Leu, Ile, Val, Met, Phe, and Tyr) or destabilizing (Gly, Ala, Cys, Ser, Thr, Asn, Gln, Asp, Glu, His, Arg, Lys, and Trp) residues, and intervening regions that consist of both stabilizing and destabilizing residues in the hydrophobic core but no clusters. Subsequently, we designed a series of two-stranded coiled-coils to determine what defines a destabilizing cluster and varied the length of the destabilizing cluster from 3 to 7 residues to determine the length effect of the destabilizing cluster on protein stability. The results showed a dramatic destabilization, caused by a single Leu to Ala substitution, on formation of a 3-residue destabilizing cluster (DeltaT(m) of 17-21 degrees C) regardless of the stability of the coiled-coil. Any further substitution of Leu to Ala that increased the size of the destabilizing cluster to 5 or 7 hydrophobic core residues in length had little effect on stability (DeltaT(m) of 1.4-2.8 degrees C). These results suggested that the contribution of Leu to protein stability is context-dependent on whether the hydrophobe is in a stabilizing cluster or its proximity to neighboring destabilizing and stabilizing clusters.     

Optimization of aromatic side chain size complementarity in the hydrophobic core of a designed coiled-coil.

The coiled-coil structure plays an important roles, especially in protein assembly. Previously we constructed AAB-type heterotrimeric coiled-coils by manipulating the packing in the hydrophobic core using Trp and Ala residues, where one Trp and two Ala residues were placed in the hydrophobic core instead of three Ile residues. To optimize the packing complementarity in the hydrophobic core, we investigated the effects of introducing various aromatic amino acids on the formation of an AAB-type heterotrimeric coiled-coil, by circular dichroism, thermal stability, and nuclear magnetic resonance (NMR) studies. We found that the Phe residue was more suitable for heterotrimeric coiled-coil formation than the Trp residue, when combined with two Ala residues, whereas the Tyr and His residues did not induce the coiled-coil structure efficiently.     

Effect of chain length on coiled-coil stability: decreasing stability with increasing chain length

The de novo design and biophysical characterization of three series of two-stranded alpha-helical coiled coils with different chain lengths are described. Our goal was to examine how increasing chain length would affect protein folding and stability when one or more heptad repeat(s) of K-A-E-A-L-E-G (gabcdef) was inserted into the central region of different coiled-coil host proteins. This heptad was designed to maintain the continuous 3-4 hydrophobic repeat of the coiled-coil host and introduce an Ala and Leu residue in the hydrophobic core at the a and d position, respectively, and a pair of stabilizing interchain ionic i to i' + 5 (g to e') interactions per heptad inserted. The secondary structures of the three series of disulfide-bridged polypeptides were studied by CD spectroscopy and their stabilities determined by chemical and thermal denaturation. The results showed that successive insertions of this heptad systematically decreased the stability of all the coiled coils studied regardless of the overall initial stability of the host coiled coil. These observations are in contrast to the generally accepted implication that the folding and stability of coiled coils are enhanced with increasing chain length. Our results imply that, in these examples where an Ala and Leu hydrophobic residue were introduced into the coiled-coil core per inserted heptad, there was still insufficient stability to overcome unfavorable entropy associated with chain length extension, even though the inserted heptad contained the most stabilizing hydrophobic residue (Leu) at position d and stabilizing ionic attractions.     

Defining the minimum size of a hydrophobic cluster in two-stranded alpha-helical coiled-coils: effects on protein stability

The alpha-helical coiled-coil motif is characterized by a heptad repeat pattern (abcdefg)(n) in which residues a and d form the hydrophobic core. Long coiled-coils (e.g., tropomyosin, 284 residues per polypeptide chain) typically do not have a continuous hydrophobic core of stabilizing residues, but rather one that consists of alternating clusters of stabilizing and destabilizing residues. We have arbitrarily defined a cluster as a minimum of three consecutive stabilizing or destabilizing residues in the hydrophobic core. We report here on a series of two-stranded, disulfide-bridged parallel alpha-helical coiled-coils that contain a central cassette of three consecutive hydrophobic core positions (d, a, and d) with a destabilizing cluster of three consecutive Ala residues in the hydrophobic core on each side of the cassette. The effect of adding one to three stabilizing hydrophobes in these positions (Leu or Ile; denoted as [see text]) was investigated. Alanine residues (denoted as [see text]) are used to represent destabilizing residues. The peptide with three Ala residues in the d a d cassette positions ([see text]) was among the least stable coiled-coil (T(m) = 39.3 degrees C and Urea(1/2) = 1.9 M). Surprisingly, the addition of one stabilizing hydrophobe (Leu) to the cassette or two stabilizing hydrophobes (Leu), still interspersed by an Ala in the cassette ([see text]), also did not lead to any gain in stability. However, peptides with two adjacent hydrophobes in the cassette ([see text])([see text]) did show a gain in stability of 0.9 kcal/mole over the peptide with two interspersed hydrophobes ([see text]). Because the latter three peptides have the same inherent hydrophobicity, the juxtaposition of stabilizing hydrophobes leads to a synergistic effect, and thus a clustering effect. The addition of a third stabilizing hydrophobe to the cassette ([see text]) resulted in a further synergistic gain in stability of 1.7 kcal/mole (T(m) = 54.1 degrees C and Urea(1/2) = 3.3M). Therefore, the role of hydrophobicity in the hydrophobic core of coiled-coils is extremely context dependent and clustering is an important aspect of protein folding and stability.     

Engineering of the hydrophobic core of an alpha-helical coiled coil

The amino acid sequence that forms the alpha-helical coiled coil structure has a representative heptad repeat denoted by defgabc, according to their positions. Although the a and d positions are usually occupied by hydrophobic residues, hydrophilic residues at these positions sometimes play important roles in natural proteins. We have manipulated a few amino acids at the a and d positions of a de novo designed trimeric coiled coil to confer new functions to the peptides. The IZ peptide, which has four heptad repeats and forms a parallel triple-stranded coiled coil, has Ile at all of the a and d positions. We show three examples: (1) the substitution of one Ile at either the a or d position with Glu caused the peptide to become pH sensitive; (2) the metal ion induced alpha-helical bundles were formed by substitutions with two His residues at the d and a positions for a medium metal ion, and with one Cys residue at the a position for a soft metal ion; and (3) the AAB-type heterotrimeric alpha-helical bundle formation was accomplished by a combination of Ala and Trp residues at the a positions of different peptide chains. Furthermore, we applied these procedures to prepare an ABC-type heterotrimeric alpha-helical bundle and a metal ion-induced heterotrimeric alpha-helical bundle.     

The Alacoil: A very tight,antiparallel coiled-coil of helices

The Alacoil is an antiparallel (rather than the usual parallel) coiled-coil of α-helices with Ala or another small residue in every seventh position, allowing a very close spacing of the helices (7.5–8.5 Å between local helix axes), often over four or five helical turns. It occurs in two distinct types that differ by which position of the heptad repeat is occupied by Ala and by whether the closest points on the backbone of the two helices are aligned or are offset by half a turn. The aligned, or ROP, type has Ala in position “d” of the heptad repeat, which occupies the “tip-to-tip” side of the helix contact where the Cα–Cβ bonds point toward each other. The more common offset, or ferritin, type of Alacoil has Ala in position “a” of the heptad repeat (where the Cα-Cβ bonds lie back-to-back, on the “knuckle-touch” side of the helix contact), and the backbones of the two helices are offset vertically by half a turn. In both forms, successive layers of contact have the Ala first on one and then on the other helix. The Alacoil structure has much in common with the coiled-coils of fibrous proteins or leucine zippers: both are α-helical coiled-coils, with a critical amino acid repeated every seven residues (the Leu or the Ala) and a secondary contact position in between. However, Leu zippers are between aligned, parallel helices (often identical, in dimers), whereas Alacoils are between antiparallel helices, usually offset, and much closer together. The Alacoil, then, could be considered as an “Ala anti-zipper.” Leu zippers have a classic “knobs-into-holes” packing of the Leu side chain into a diamond of four residues on the opposite helix; for Alacoils, the helices are so close together that the Ala methyl group must choose one side of the diamond and pack inside a triangle of residues on the other helix. We have used the ferritin-type Alacoil as the basis for the de novo design of a 66-residue, coiled helix hairpin called “Alacoilin.” Its sequence is: cmSP DQWDKE A AQYDAHA QE FEKKS HRNng TPEA DQYRHM A SQY QAMA QK LKAIA NQLKK Gseter (with “a” heptad positions underlined and nonhelical parts in lowercase), which we will produce and test for both stability and uniqueness of structure.     

Role of hydrophobic clusters in the stability of alpha-helical coiled coils and their conversion to amyloid-like beta-sheets

We designed a library of short peptides using standard rules for coiled-coil assembly. Depending on the composition of amino acids in the non-interacting region of the coiled coil (positions b, c, and f) these peptides are able to convert from alpha-helical to beta-sheet secondary structure. This type of transition is observed in amyloid-like proteins and is a key feature associated with many types of neurodegenerative diseases. Studies on peptides that are 14 amino acids in length indicated that positioning hydrophobic amino acids at an f position within a heptad repeat accelerated the rate of conformational conversion as compared to that at a c position. We believe that this occurs because of the formation of a hydrophobic pocket that preferentially stabilizes beta-sheets over alpha-helices. This effect was also observed in longer 21 amino acid peptides. Our study shows that the relative rates of structural conversion correlate with the formation of a continuous three-amino-acid hydrophobic patch consisting of amino acids in the d, f, and a positions and not on the secondary structure propensities of the individual amino acids. The sequence-structure relationship observed in this study will be used to help understand the mechanism of amyloid fiber formation and design future coiled-coil and beta-sheet-forming peptide systems.     

Solution structure of the C-terminal antiparallel coiled-coil domain from Escherichia coli osmosensor ProP

Bacteria respond to increasing medium osmolality by accumulating organic solutes that are compatible with cellular functions. Transporter ProP of Escherichia coli, a proton symporter and a member of the major facilitator superfamily, senses osmotic shifts and responds by importing osmolytes such as glycine betaine. ProP contains a cytoplasmic, C-terminal extension that is essential for its activity. A peptide corresponding to the C-terminal extension of ProP forms a homodimeric alpha-helical coiled-coil even though some of its heptad a positions are not occupied by hydrophobic amino acid residues. Unexpectedly, amino acid replacement R488I, occurring at a heptad a position, destabilized the coiled-coil formed by the ProP peptide and attenuated the response of the intact transporter to osmotic upshifts in vivo. Thus, ProP was proposed to dimerize via an antiparallel coiled-coil. We used nuclear magnetic resonance (NMR) spectroscopy to determine the structure of the synthetic peptide corresponding to residues 468-497 of ProP. This region did form an antiparallel coil-coil in which critical residue R488 specifies the antiparallel coiled-coil orientation by forming stabilizing salt-bridges. Charged residues (both acidic and basic) are clustered on the c/g surface of the coiled-coil whereas polar residues are distributed on the b/e surface. This causes the structure to be bent, in contrast to other known antiparallel coiled-coils (those from the hepatitis delta antigen (PDB ID code 1A92) and the bovine F(1) ATPase inhibitor protein (PDB ID code 1HF9)). The coiled-coil and its possible importance for osmosensing are discussed.     

Designing heterodimeric two-stranded alpha-helical coiled-coils. Effects of hydrophobicity and alpha-helical propensity on protein folding,stability, and specificity

The E/K coil, a heterodimeric coiled-coil, has been designed as a universal peptide capture and delivery system for use in applications such as biosensors and as an expression and affinity purification tag. In this design, heterodimer formation is specified through the placement of charged residues at the e and g positions of the heptad repeat such that the E coil contains all glutamic acid residues at these positions, and the K coil contains all lysine residues at these positions. The affinity and stability of the E/K coil have been modified to allow a greater range of conditions for association and dissociation. Increasing the hydrophobicity of the coiled-coil core, by substituting isoleucine for valine, gave increases in stability of 2.81 and 3.73 kcal/mol (0.47 kcal/mol/substitution). Increasing the alpha-helical propensity of residues outside the core, by substituting alanine for serine, yielded increases in stability of 2.68 and 3.28 kcal/mol (0.41 and 0.45 kcal/mol/substitution). These sequence changes yielded a series of heterodimeric coiled-coils whose stabilities varied from 6.8 to 11.2 kcal/mol, greatly expanding their scope for use in protein engineering and biomedical applications.     

Positional dependence of the effects of negatively charged Glu side chains on the stability of two-stranded α-helical coiled-coils

The effects on protein stability of negatively charged Glu side chains at different positions along the length of the α-helix were investigated in the two-stranded α-helical coiled-coil. A native coiled-coil has been designed which consists of two identical 35 residue polypeptide chains with a heptad repeat Q_gV_aG_bA_cL_dQ_eK_f and a Cys residue at position 2 to allow the formation of an interchain 2-2′ disulphide bridge. This coiled-coil contains no intra- or interchain electrostatic interactions and served as a control for peptides in which Glu was substituted for Gln in the e or g heptad positions. The effect of the substitutions on stability was determined by urea denaturation at 20°C with the degree of unfolding monitored by circular dichroism spectroscopy. A Glu substituted for Gln near the N-terminus in each chain of the coiled-coil stabilizes the coiled-coil at pH 7, consistent with the charge–helix dipole interaction model. This stability increase is modulated by pH change and the addition of salt (KCl or guanidine hydrochloride), confirming the electrostatic nature of the effect. In contrast, Glu substitution in the middle of the helix destabilizes the coiled-coil because of the lower helical propensity and hydrophobicity of Glu compared with Gln at pH 7. Taking the intrinsic differences into account, the apparent charge–helix dipole interaction at the N-terminus is approximately 0.35 kcal/mol per Glu substitution. A Glu substitution at the C-terminus destabilizes the coiled-coil more than in the middle owing to the combined effects of intrinsic destabilization and unfavourable charge–helix dipole interaction with the negative pole of the helix dipole. The estimated destabilizing charge–helix dipole interaction of 0.08 kcal/mol is smaller than the stabilizing interaction at the N-terminus. The presence of a 2-2′disulphide bridge appears to have little influence on the magnitude of the charge–helix dipole interactions at either end of the coiled-coil. © 1997 European Peptide Society and John Wiley & Sons, Ltd.     

The effect of a side chain-backbone swap on protein stability.

To assess the relative importance of backbone hydrogen bonding (H-bonding) vs. side chain hydrophobicity in protein structural formation, a method called side chain-backbone swap is proposed. Such a method swaps the side chain and backbone portions of certain amino acid residues, such as Asp, Glu, Asn, Gln, Lys, and Arg. Such a swap retains the sequence of a polypeptide and preserves the identity of the backbone linkage. On the other hand, the swap disrupts backbone H-bonding geometry because of the introduction of extra methylene groups into the peptide backbone. In this project, we chose the two-stranded alpha-helical coiled-coil to implement side chain-backbone swap. A pair of 36-residue peptides was designed. The two peptides have identical sequence with four residues in each heptad repeat occupied by glutamyl residues. Each glutamic acid was incorporated either as alpha-glutamyl residue (the peptide is denoted as alpha-Glu-36) or as gamma-glutamyl residue (the peptide is denoted as gamma-Glu-36). The inter-conversion between the two peptides constitutes a side chain-backbone swap. Residues constituting the hydrophobic core of the coiled-coil, however, are left unchanged. The peptide pair was characterized by circular dichroism spectroscopy, reversed-phase liquid chromatography (RPLC), and two-dimensional nuclear magnetic resonance (NMR). The results indicate that alpha-Glu-36 is a two-stranded alpha-helical coiled-coil while gamma-Glu-36 lacks stable structural elements. It is concluded that, at least for coiled-coils where hydrophobic interactions are predominantly long-range, local backbone H-bonding is a required for structural formation, consistent with a hierarchic folding mechanism. The methodological implication of side chain-backbone swap is also discussed.